Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Felipe

Pages: 1 ... 7 8 [9] 10 11
201
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 07, 2014, 12:15:16 AM »
The digital could be necessary, probably all analog could lead to low levels, that could only be raised with a juiced link or a +20 shotgun
ALSO analog only could give trouble with internal, as I remember with my old and already sold T1i WITH UN USABLE LOW LEVELS
Keep digital and go with 21 , but any way you are the boss.

202
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 06, 2014, 11:49:54 PM »
21 levels, please don't try to match this cameras sound to a high end audio recorder, as I told you I own broadcast cameras with inferior image quality but way better sound hardware with only 14 levels, 21 is ooookkkkk!

203
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 06, 2014, 11:35:41 PM »
I would be happy to make custom versions just let me know, I will direct send those to the user, you want less then 21? if so, what sounds good for you?

The one that you provided with 21 levels is perfect that is done , about the external or internal mic in menu, as well if you go
into ML Menu to switch to external or internal and then to the screen you end up moving the camera plus extra thinking, in a
probably stressing situation as is handling paid work.

204
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 06, 2014, 11:19:11 PM »
Well, if that is how many clicks it is in the Actual Canon Menu if you use Manual in there, ML gets to Max much faster when you hold the button down, that is what I do, I hold it down till I get around where I want it then fine tune it, works good.

For a temp module, I did not want to try to figure out the coding needed to use gain steps, turned out to be harder then I though. When I tried, it kept saying .max has to be consistant, so it doesnt seem like if statements work within menu for .min and .max or if it does, I don't know how to do it, so best to keep it simple and match Canon menu at same time and still make use of ML speed when holding key down to skip through faster.

But I'm using the one you made few minutes ago with 22 levels is done !!

205
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 06, 2014, 11:15:17 PM »
Is faster to confirm that you are in external mic, and sound is fine because meters are working.
and just plug out and then you are sure you are in internal,
Menu for this add extra work where is not needed.
And again 22 levels is already a lot , HOW ABOUT HEADPHONE JACK ?

206
Camera-specific Development / Re: Canon 700D / T5i
« on: April 06, 2014, 11:03:57 PM »
I personally think that 63 levels is too much, too many clicks to adjust levels, Say for example my Panasonic P2 Broadcast camera that has build in XLR connectors and good
Preamps, plus a Headphone jack has only 14 levels, 21 levels is fine but 63 ???
Another thing , Was great to test  this but, the feature external and internal mic , can lead to mistakes I will not use it.

207
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 06, 2014, 11:01:34 PM »
Another thing , Was great to test  this but, the feature external and internal mic , can lead to mistakes I will not use it.

208
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 06, 2014, 10:55:32 PM »
I personally think that 63 levels is too much, too many clicks to adjust levels, Say for example my Panasonic P2 Broadcast camera that has build in XLR connectors and good
Preamps, plus a Headphone jack has only 14 levels, 21 levels is fine but 63 ????

209
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 06, 2014, 08:05:53 PM »
I can add a choice to set it from *1 to *3
Another choice that might be needed. WOOOW

210
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 06, 2014, 07:42:54 PM »
Also I doubt it's possible but if we could use half clicks somehow we could achieve even less hiss while using the cameras pre Amps
This cameras are not high level audio recorders that is why 60 plus steps is not useful in real life 20 plus is perfect.
If you want that type of accuracy, should use a mixer and external sound.

211
Camera-specific Development / Re: Canon 700D / T5i
« on: April 06, 2014, 07:36:52 PM »
By the way, I added the feature to go from Internal Mic to External mic and vice versa while an Internal Mic is plugged in, but is it really of any use to do that? If there is, I will keep it in the module.

Only advantage is if for some reason you want to quickly switch to your internal mics without messing with the mic plug on cam if one is plugged in, but again, does anyone ever do that?

I can't do anything cool like putting int on one channel and ext on another channel, just the basic disable external mic while it is still plugged in.

It is interesting for example for some reason we can record isolated sounds with the shotgun on camera, and suddenly ambient recording with the omni build in.

Another situation could be the shotgun on camera gets static sounds or some how gets strange sounds  by hardware problems, then switch to internal and at least get some audio
( For this last situation a headphone jack will be necessary )

212
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 06, 2014, 02:25:06 PM »
So... what advantage do you get by duplicating Canon controls in ML menu?
Are there differences in what the meters are showing? Last time I've checked on 5D3, they were showing the same thing.
ML Audio menu is faster or more simple, concept is clearer, steps x3, more logic for this device. Visual representation matches 100% what we see when recording
 8)

213
Camera-specific Development / Re: Canon 700D / T5i
« on: April 06, 2014, 02:11:20 PM »
Merged. Thanks mk :)
Please merge that in the 650D Also

214
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 06, 2014, 02:09:57 PM »

So question is, do we like the quicker way to get from min to max by multiplying by 3 or finer control from 0 to 63 just as in Canon menu???

I will be happy to tweak it however you think is best??

X3 is better hands down.

215
Camera-specific Development / Re: Canon 700D / T5i
« on: April 05, 2014, 11:40:53 PM »
Yes it does work perfect on the 650D JUST LIKE THE 700D
Thank you

216
Camera-specific Development / Re: Canon 700D / T5i
« on: April 05, 2014, 10:35:46 PM »
But I can add the stub for setvolumein though if you want to see if module works on 650d too.

Sure I'll love to try it

217
Camera-specific Development / Re: Canon 700D / T5i
« on: April 05, 2014, 03:15:33 PM »
it most likely can be used on 650d just need to add the stub, not sure bout the eye sensor thing?

Arrow set shortcuts is the name of the function, when you activate the eye sensor, shows some shortcuts to adjust iso, kelvin speeed etc, will be great if you with your brilliant mind get to use that for the recording level while recording. Can you add a stub for the 650D  ?

218
Camera-specific Development / Re: Canon 700D / T5i
« on: April 05, 2014, 06:22:39 AM »
FOR 700D/T5i ONLY!!!
I created a module to give us 700D users use of Manual Audio Input within ML Audio menu if anyone is interested in giving it a shot.

Can this module be used on the 650D or can you make one for that one with the shorcuts , so can be adjusted calling the control from the eye sensor, is that too much to ask for ? ?

219
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 02, 2014, 02:56:19 PM »
Mine installed and everything is working just fine

Not only works fine works perfect because manual sound was fixed and now auto and manual is perfect

220
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: March 30, 2014, 01:36:06 PM »
Just to update everyone, nanomad merged in the meter patch I commited so the meters should be in the nightly soon, so you won't have to get the version from my download site anymore!!!  :D
Finally, Please let us know the happy moment

221
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: March 22, 2014, 01:36:57 PM »
New features starting from the next build:
 - Defishing and Anamorphic preview
 - Expsure Sim control in LV/Photo mode

That is going to help a lot to us Live view shooters, Great :D

222
Camera-specific Development / Re: Canon 700D / T5i
« on: March 16, 2014, 08:53:47 PM »
Alex and 1% Great work

223
Camera-specific Development / Re: Canon 700D / T5i
« on: March 16, 2014, 05:24:21 PM »
@mk11174, you're the man!
Some time ago I was wondering why the external flash in live view didn't work using ML options, Well this might be good info for one of the developers like
mk11174 or Alex, The SL1 or 100D, Does fire external flashes in live view, I'm not a developer , but probably one of you guys could check the code and see
how it goes to apply it to the 650D, 700D or probably to all those ML Cameras that don't do this.

224
Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: March 14, 2014, 04:14:16 AM »
Some time ago I was wondering why the external flash in live view didn't work using ML options, Well this might be good info for one of the developers like
mk11174 or Alex, The SL1 or 100D, Does fire external flashes in live view, I'm not a developer , but probably one of you guys could check the code and see
how it goes to apply it to the 650D, 700D or probably to all those ML Cameras that don't do this,

225
Archived porting threads / Re: [UNMAINTAINED] Canon 100D / SL1
« on: March 14, 2014, 01:20:58 AM »
Probably this camera will not have ML, BUT is good everyone to know that Can shot external strobes in live view, which is a novelty in this Canon Cameras.

Pages: 1 ... 7 8 [9] 10 11