Messages

Now it works fine. Both at my home and on ML server

I'm using the codesourcery toolchain for my 1100D work. It's pre-built and works fine.

http://www.mentor.com/embedded-software/sourcery-tools/sourcery-codebench/editions/lite-edition/

Thanks, we had a similar issue on another forum. I'll talk with the tapatalk guys

I don't have an iPad, can you post a screenshot or a photo of what's showing up instead?

Wierd, I'd have a look at the focusing routine as Half shutter is used for that. That is, if you know where to look in the firmware 

If you had to use -mlong-calls chances are you're using a 64bit compiler.
In order to test and develop Magic Lanter properly, I suggest you use a 32bit arm compiler. If you're on linux there's no need to use a 32 bit distrubtion, you just need to install libc6-i386

@ nanomad nice pice of Canon History you have ( EOS650 without D)

It's a great piece of hardware. 24 years old and it still works like it was its first day. The same goes for the lenses (altough I had to clean the tele since it had dust in it)

I also suggest

I would wish that the ML community would support alex with one piece of every canon model - this would make things easier for him and help the whole canon filmer/user community.
Let´s see it this way - for example with a 600d:
If every 600d user who uses ML gives him 10 $ or € it needs only around 70 people to solve this problem. This could work for every model.
I would go with it immediately ...
So, is there anybody around who´s interested?

The donation feature is in the works, don't worry 

Hi, I'm glad you want to help. Leave me your skype/gmail address in PM and I'll get you started on the 1100D port and ML in general.

Hi,
I'm glad you want to help. I suggest you start by setting up the toolchain to compile Magic Lantern and compile the latest release for the 1100D.

I'll leave that to A1ex, bit as far as I know that's not possible since you are limited either by the burst rate of your camera or the FPS/resolution of the buffer used in silent pic mode.

Well, you'll miss the on-board audio or external audio (where available). Not a big loss, but then syncing becomes a PITA (i.e. you can't use plugins like PluralEyes) unless you use a clapper.

Yes, sorry, exp override. So we do have manual video controls as long as we activate it. Which is nice 

[This post contains current issues with ML]

This post contains current issues with ML

- [WONTFIX] Shutter and aperture working only in Exp Comp mode (applies to LV too)
- [L] Going from Exp Comp ON to OFF doesn't re-disable Shutter and Aperture
- [M] Focus peaking: peaks are off
- [M] Focus peaking - grayscale preview: Image is magenta
- [H] Magic Zoom: image is zoomed but it's being displayed wrong (weird aspect ratio, flickering)

Movie mode
- [H] ISO Stuff is not working

P Mode
- [L] Can't disable ExpSim
- [M] GlobalDraw - interaction with Canon graphics not working

I didn't finish testing as I have to go

Well, it sure did something.



I'll run the test suite you posted now

I'll increase it to 20 by default as 5 is really low

No can do, without editing the source files. I'll leave to 5 for now

Check the downloads page 

I've done that as soon as I switched to a 32bit compiler. Maybe it's the codesurcery compiler, dunno

Here's the patch I've created to make 1100D compile again

http://nanomad.magiclantern.fm/1100D-compiles.patch

Uhm, dunno if I'm doing something wrong, but the memory usage stays the same (26K + 865K)

This time I've used codesurcery 32bit arm gcc (4.6.3)

Free Memory: 26K + 865K

Oh, and the overlay isn't showing up in the idle screen (the one that says P, ISO AUTO, AWB, MF, ...)

I'll have a look into fonts after making the ML menu button work reliably (shouldn't take too long).

Thanks for all the help!

Hi all!
Since we are lacking a proper mobile "theme" and since I happen to be a great fan of tapatalk, I've enabled it on our forum. Let me know if you stumble across any issues while using it.

Just a quick question a1ex, as I hate eating pre-made foods...
How did you find these values 

Fixed

Locking and sticking this topic as it's a very useful suggestion