Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - shhd

Pages: [1] 2 3
1
I think the external monitor settings
I had the same problem there is a setting I don't remember now but I will turn the screen back on and let you know soon if I find time
I had an external recording screen and in the main menu there is an option related to the degree, strength or method of receiving the signal and the options were two options made up of numbers, one of which was working with 5Diii
and the other works with 5D iv
Try searching the screen settings in the signal capture

2
Is it working on Zhiyun-Tech Crane

3
Tutorials and Creative Uses / Re: EOSHD vs cinestyle
« on: April 25, 2021, 12:30:55 AM »
For comparison, I used a 5D iv camera to compare the style of the images
I did not use ML in the comparison here to compare the styles of the images EOSHD vs cinestyle

4
Tutorials and Creative Uses / Re: EOSHD vs cinestyle
« on: April 21, 2021, 09:19:25 PM »
Correct ML unrelated by comparison

5
Tutorials and Creative Uses / EOSHD vs cinestyle
« on: April 21, 2021, 08:51:08 PM »
Hello ..
Here is a simple and quick comparison between  EOSHD vs cinestyle
canon 5 D iv
35mm f / 2
iso 160
60 frames per second


cinestyle seems better than EOSHD

6
Post-processing Workflow / Re: MVLFS problem ?
« on: April 13, 2021, 01:59:09 AM »
I apologize if the language is not good

This happened to me because I was using a copy from the developer experience and not from the approved and stable versions, and I was able to convert the file to DNG with MLV.App.v1.12 if you were using a copy of Magic Lantern other than the stable version for example 10-bit 12-bit version 14-bit or developer trial version like the one that records 4K You must use MLV.App to properly extract DNG any other application that will only work with Nightly Builds.

7
I might not understand some of your speech because I use google translate
If your camera 5D3  version is 1.1.3, HDMI doesn't work, you need to upgrade to 1.2.3. This happened to me in 5D 3

8
It seems that I have read here and on YouTube while searching and reading about your version that if you use your version, you can combine the speeds of the SD and CF memory cards. Is this correct?
And how can we do
You are the copy programmer and you know how

9
Now what is the next step
I still do not understand
How can I combine both SD and CF card speeds
For information in previous experiments, I took the same steps and results appeared close to the pictures that I attached to you, and when recording the speed does not exceed 92 megabytes, where I noticed that the recording is only based on the speed of CF
Where is the way in which I combine my two memories speeds together

10
SD only






11
SD + CF in camera

These results that appeared to me




12
Oh well I'll do it
Activate Bench.mo, disable other functionality, including raw video, and test again
Is that correct

13
I am required to download
module bench.mo
And place it in the module
And I just enable it
Ok where do I find the file
module bench.mo
To download it

14
Thank you
and I ask those who have the time to explain the things that I do step by step, and I appreciate having pictures of the steps because sometimes you talk about things and names that I do not know how to get to them

15
Hi ..
Danny, please see
I downloaded your copy and activated sd overlock
Then I tested the memory writing in picture mode
These are the steps

As I mentioned, I installed your version and did nothing but activate sd overlock and test memory
How do I combine the two speeds
SD and CF card speed







16
In fact, 1.1.3 is slightly faster to write to memory than 1.2.3, there is a response speed even from the camera away from the memory write speed

17
Thank you Walter
I knew how to get to it from the Night Build page

18
 Warning - while you were typing a new reply has been posted. You may wish to review your post.

19
Quote
Top of page -> Downloads -> Download Nightly Builds -> 5D Mark III 1.1.3 -> Installation or Helpful Links.


Dear please excuse you
I don't want the night build or the ML version
I want firmware version 1.1.3 for 5Diii so I first go back from 1.2.3 to 1.1.3 then install ML

 ???

20
Thank you
However, I was able to go back from 1.5.3 by opening the memory door without using EOS Utility
Can you help me put a link to version 1.1.3 for the camera and not ML?

21
Now my 5D III camera is 1.2.3 and it was 1.5.3 and I managed to go back to 1.2.3
Would you recommend that I also go back to 1.1.3 and is that possible with the same idea of ​​opening the memory door and fooling the camera

22
Can you put the link to your version of the site because this version has been patched a lot by Danny and I no longer know where is the version that works well with the SD Overclock feature?
I found more than one link in some posts, and Danny from time to time puts an update. Can you guide me
I am using 5D III version 1.2.3

23

PS: i forgot to mention that i also use official canon batteries AND cheap knock-offs, and it has never happened here.  always <>130 MB/S with card spanning and overclock.

hope that helps!

thank you very much

Can you take pictures of the screen with your most important settings and things that you have activated?

24


The ML community is large and it is difficult to find topics that you have read or browse during your day or arrived at by chance, but use this link to search and see the many discussions
Here is one of the quotes in support of my statement and that a lot here talks about that 128 is unstable


https://www.google.com/search?safe=strict&client=firefox-b-d&sxsrf=ALeKk032f-0yRbQSvnpiMv67800iFnsFIw%3A1597400740054&ei=pGY2X_fpAu6a1fAP5eaP0AY&q=128+GB+is+unstable+site%3Awww.magiclantern.fm&oq=128+GB+is+unstable+site%3Awww.magiclantern.fm&gs_lcp=CgZwc3ktYWIQA1AAWABgx48TaARwAHgAgAEAiAEAkgEAmAEAqgEHZ3dzLXdpesABAQ&sclient=psy-ab&ved=0ahUKEwj3y7K9vZrrAhVuTRUIHWXzA2oQ4dUDCAs&uact=5


128 GB is unstable site:www.magiclantern.fm


Quote
Hey everyone - I'm new so please bear with me if I sound stupid lol. Just making sure I read this correctly - the 256G card will only hold 128G of footage in the 5D3? However, it will operate fast enough to actually record the raw footage - unlike KB's 128G cards? I've seen nothing but bad reviews on their 128G cards from what reading I've done on here.  I'm considering picking up a couple of their 64G cards simply because the price can't be beat and seems to perform ok?? Someone please correct me if I'm wrong.

https://www.magiclantern.fm/forum/index.php?topic=7801.25




25
Thank you for your contribution and the memory that you suggest to me. I read here that 128 gigabytes are not stable and the best is 64 or 256

Pages: [1] 2 3