Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Stousen

Pages: [1] 2
1
General Chat / Re: Canon R5
« on: February 15, 2020, 09:21:25 AM »
Resolution, IBIS, and Dual Pixel Auto focus means nothing. If it can't do internal RAW at least 10bit then the 5D2 is better that crap.

 :D :P

2
General Chat / Re: New grip may be of interest to some ML users
« on: February 06, 2020, 07:00:36 AM »
Super cool!!

The compatsbility with ML shall be most interesting to see.
Who pf us should be the one trying it out  ;)

3
Modules Development / Re: Danne's crop_rec_4k & ISO experiments
« on: January 30, 2020, 09:46:20 PM »
You need a better bike  8)
Previewing capabilities will not change with different cards. Framing...

Aye, thanks for the enlightenment :D :D ;)

4
Modules Development / Re: Danne's crop_rec_4k & ISO experiments
« on: January 30, 2020, 09:16:40 PM »
It's hard to see what you expect or even if there is a problem involved. To minimize communication mishaps you need to be specific with settings used, preferrably with screenshots or a screenrecording. Use contextual terminology instead of making up new words etc.

LoL, i hear ya. Will try not to do a Hegel and be swift but clear.  :-*

Card spanning: on
1/1 3k crop
14 bit lossless
2.35:1
Required 110 write speed

Live view: framing
Kill global draw: no, also tried yes
Sd uhs hack : on


Live view before recording: framing
Live view after pushing rec: framing
Live view some seconds after pushing rec: pink screen but still recording

70 ish write speed CF - 40-50 ish write speed on SD.
Tho thought the liveview would function better if the cardspanning actually increased the bandwith? Or am i out biking on a road with no light?

Cheers

5
Modules Development / Re: Danne's crop_rec_4k & ISO experiments
« on: January 30, 2020, 07:06:36 PM »
@Stousen Yes!

In 1080p = Real Time.
In Crop modes = Framing.

I managed to get it to work, i get avout 110-115 in w/speed!
Tho my live view doesnt work while recording in crop 3k? :(

6
Modules Development / Re: Danne's crop_rec_4k & ISO experiments
« on: January 26, 2020, 02:31:20 PM »
Have new card now: Sandisk Extreme Pro SDXC UHS-I 64gb (170MB/s read, 90MB/s write)

Compiled latest updates. Card-spanning and SD overclocking working well now:

I can get 1min+ 3600 x 1532 / 24fps / 2.35:1, continuous at 3072p. 1080p 14bit on SD card alone – continuous! :)

Many thanks @ilia3101, @Danne.

Wow, great work, need to try this when i get back home. Is the liveview working as normal in this cases?? :o

7
Modules Development / Re: Danne's crop_rec_4k & ISO experiments
« on: January 24, 2020, 02:34:48 PM »
This is super exciting, i have some good cards that will try it out on this weekend.
UHD in 14bit 24fps with liveview working?? Sounds to good to be true ???

8
Modules Development / Re: Danne's crop_rec_4k & ISO experiments
« on: January 18, 2020, 09:47:31 PM »
Hi, I love the anamorphic mode, and i do not mind that it is squeezed in live view, and its perfect to be able to frame The desqueezed view before recording.
But i have one question that i rly havent found clearity to yet.
Even tho the live view is squeezed, is it possible to move the center position so that it matches the center better?

I made a video including external monitor to show what i mean.
It would be very very useful, (atleast for me;) ) if it was possible to match the squeezed views center point to the live view center point. In laymen terms, move the image up;)

4aed6ecab1

Is this complicated / goes much deeper than what I may think?

Thanks!

Kind regards
//Chris

9
Go into the canon menu and change the mirror hdmi settings.

10
Modules Development / Re: Danne's crop_rec_4k & ISO experiments
« on: January 12, 2020, 06:24:38 PM »
The anamorphic mode is superb, so much less noise in low light situations.

Right bow i have the slow framing preview and a live preview on atomos shinobi working.
Tho the framing is correct on the canon camera its a bit off on the external monitor. I wonder if its possible to arrange it so that i can get the center position on my external monitor aswell?

//Chris

11
Hardware and Accessories / Re: Atomos Shinobi
« on: December 28, 2019, 08:59:17 PM »
https://store.smallhd.com/products/FOCUS-OLED

This one is great, if you want to focus, you can increase the sharpness on the screen

Hi Lars!

Looks great, tho only 350 in brightness will be to dark in a ely bright environment. The shinobi has 1000.
But still, does that smallhd work for ur camera? Mkiii?

12
Hardware and Accessories / Atomos Shinobi
« on: December 28, 2019, 07:56:46 PM »
Hi! Anyone know if the Atomos Shinobi works well with ML and mkiii? 1.2.3 firmware.

Focus and liveview also anamorphic stretch is the reason i want an external display.

Thanks for any info!

Kind regards
Chris

13
Share Your Videos / Re: introducing ISO 120!
« on: December 14, 2019, 08:09:21 PM »
Thanks for sharing!

14
Share Your Videos / Re: introducing ISO 120!
« on: December 14, 2019, 01:53:11 PM »
Nice!
What lenses are you using for your tree talks? Looks great, i shall be following you. Great stuff, indeed.

15
Modules Development / Re: Danne's crop_rec_4k & ISO experiments
« on: December 12, 2019, 08:52:10 PM »
Hey Danne Great work, Cheers, I should try the iso average etc asap. :)
About the centered liveview, It doesn't seem to be centered to me yet. (I don't think my account has the permission to upload images so I can't really show you.)
But to explain in words - When I zoom in 10x to center, it shows another center then what is showing in Live View. The center is further up than the actual center.
Have anyone else got other results?

//Chris

16
Wow! Great work 👍 should try it out tomorrow 8)

17
Share Your Videos / Re: My last Showreel 100% MLRaw - Canon 5D mark3
« on: December 11, 2019, 10:49:45 PM »
Superb! What build is it? Care too share??
And what lenses did u use?
Super nice work!

/chris

18
Modules Development / Re: Danne's crop_rec_4k & ISO experiments
« on: December 11, 2019, 10:38:48 PM »
Wow! It got fixed by Danne :-* I shall try it out tomorrow aswell! Superb work man..

Cheers
Chris

19
Camera-specific discussion / Re: Canon EOS M
« on: December 01, 2019, 09:40:55 PM »
I found this works great for cctv lens and mcm rewire crop without any vignetting from sides
Code: [Select]
                 
                             case CROP_PRESET_mcm_mv1080_EOSM:
                cmos_new[5] = 0x20;
                cmos_new[7] = 0x800;
                if (x3crop == 0x1 || crop_patch)
                {
                    cmos_new[5] = 0x380;
                    cmos_new[7] = 0xaaa;
                }
                if (ratios == 0x0 && (x3crop == 0x1 || crop_patch))
                {
                    cmos_new[5] = 0x380;
                    cmos_new[7] = 0xaaa;
                }
                break;
               

I also have this that works fine for 16:9 1920x1080p resolution(dialed down from 2520x1418) in 2.5k mode 
But... I would like to also center image in 2520x1418 but i only see this for 2.5k mode and cmos settings that i centered while being in dialed down 1920x1080 resolution, its still not centered in 2520x1418:
Code: [Select]
            case CROP_PRESET_2K_EOSM:
      cmos_new[5] = 0x2c0;             /* vertical (first|last) */
              cmos_new[7] = 0x6a9;    /* pink highlights without this */
                break;
               
What should i add if i want to have different centering after i dial down resolution to 16:9 -1920x1080 and different when i use 16:9 2520x1418 ?
I also noticed that after recording mlv it goes back to liveview after slight pause and then framing is wrong , i have to enter playback mode, then press exit in corner, when it comes back to liveview then framing is correct, so after recording there is something thats changing CMOS value again messing up framing.
I also discovered that in 2.5k mode you can actually press small triangle arrows to move your framing around like during zoom, but i tried to get it centered when white zoom box is at the center.

Did you manage to center the view?:)
I would like to do the same in the mkiii since its sometimes hard to know what i am focusing on.

Cheers
S

20
Modules Development / Re: Danne's crop_rec_4k & ISO experiments
« on: November 30, 2019, 11:32:23 AM »
Hi Danne and everyone involved, been following a lot of your work , especially with the eos M. And i thank you all so much for it. Workinh wonders.
I just bought myself a used mark iii. And tried the anamorphic mode, its awesome and the noise is so much cleaner in low light. And image quality superb. Love it. So happy, thanks guys.

I have one question about the anamorphic build, using the latest, on a 1.2.3 firmware.
I tried to understand the problem by reading this thread all over twice but i might not fully understand. When i use the anamorphic mode , the liveview halfshutter x10 works great, and zooms into the center of the image. But the ordinary liveview is focused on a different area, the upper part of the frame, so i cant really know exactly where the middle point of my shot is. Is this a thing that can be changed or is it ”common” knowledge to use the method of combininh halfshutter back and forth to know where center point rly is?

Hope it makes sense

Kind regards
S

21
Camera-specific discussion / Re: Canon EOS M
« on: November 26, 2019, 06:46:12 PM »
Here it is very reliable. I can record in 5K anamorphic mode all over the day without one single corrupted frame, without one single crash. Same for 45fps at a little less than 1080p. 2.5K at 48fps is not possible with EOS M (and will never be): card interface is way too slow - that is simple math.

What's the problem with shutter release? Absolutely don't know what you mean. I can take pictures at any time in picture mode and can record video at any time in video mode - without changing anything in settings.

For zoom mode in 1080p you have to press exactly one button after start.

Don't write ML is useless and unreliable if you don't know what you do, or if you don't know if you're doing it right.

+1

22
One thing i thought of when fixing bad pixels yesterday. Is that i could be a nice feature to be able to mask the fix pixel command. So when u are certain of a specific pixel that you want to fix, u dont have to fix the whole frame affecting the whole image, with calculations that could be faulty, on for example reflections in metal etc.
Is

23
A new MLVApp version has been released.

New in v1.10:
- Added another CA correction (and color moiree) filter
- Removed ffmpeg rescaling
- Added AVIR rescaling for ffmpeg export
- Added ACES AP1 processing gamut
- Added luminance vs. saturation tool
- Improved quality for HSL tools
- Added TIFF averaged frame export
- Added single frame JPG export
- Some bug fixes and some minor changes

Minimum OS:
- OSX 10.8.5 Mountain Lion
- Windows 7
- Ubuntu 14.04 LTS

Download at https://mlv.app/

'NNNNNNNice!!!! :D

25
Superb stuff! Love the colors in 3, eos m. I might need to get myself a mk iii tho;)) incredible

Pages: [1] 2