Messages

I shot this on my 5D Mark II using Komputerbay 64 GB 1000x cards. Graded and edited in DaVinci Resolve Lite 10
I hope you like it

Ted Ramasola here stated that he got 2 of them working with his 5DII
http://www.magiclantern.fm/forum/index.php?topic=7302.msg67206#msg67206
"So now, I got the 128gig 1000X KomputerBay cards to work both on 5DmkII and 7D. The 1050x WILL NOT."
How is this possible? Maybe theres something wrong with the alignment? Or the sector sizes?

Oh well that sucks 

I have a 5D Mark II (2). I didn't need to make my Transcend card bootable, and Google doesn't find any results when searching for how to make a 5D Mark II CF card bootable.

Well,

i just bought a Komputerbay 128GB 1000x CF card to replace my 16Gb Transcend 1000x Card. Off the Transcend car ML runs perfectly smooth. As soon as I copy the files from the Transced card to the Komputerbay card and pop it into the 5DII the camera doesnt load ML anymore. The camera says the firmware is 2.1.2 when the Komputerbay card is inserted. When the Transcend is inserted it says 2.1.2-ml-v2.3NEXT. But the ML files on both cards are exactly the same.
And when I try to do a Firmware update from the Komputerbay card it says that it hasn't found a firmware update file. Why isnt it working?

Yeah. As you already said you just have to set the Color Space to BMD Film. Then you can go on grading your Footage.

Have you tried a benchmark in movie mode with LV and raw video enabled? Speeds will be less but more accurate of achievable raw video performance.

Also, have you tried Gregory's new upload? https://bitbucket.org/GregoryOfManhattan/magic-lantern/downloads (I'm getting slower benchmarks with this build for some reason and my batteries just died so I need to charge before trying it again)

In LV with raw video enabled the camera stalls while benchmarking. I have no idea why it performs so weird.

Hey Andy, if you take a look at how my Transcend 16GB 1000x performed at the ML benchmark, I doubt that the 16GB is actually slower. Take a look at that http://pl.vg/2dpya

Try this one http://pl.vg/2dpya

Did you even look at the picture of my benchmark? My numbers are double of what you posted Ifani. Menoc postet a picture of his Komputerbay 64 GB 1000x card, and the numbers in the screenshot are the same.

Still having problems with that card.. it has to be something simple.  What version of Gregory's build are you using currently?  are you using window's or mac?

Im using a Windows PC and the 70 MB/s build of Gregory.

Hey guys. I'm still struggeling to achieve acceptable speeds in raw Video mode. My Benchmarks dont differ that much from the Komputerbay cards but I'm just achieving ~50 MB/s in video mode. I changed all my settings to the recommended. What am I doing wrong? Im using a Transcend 16GB 1000X Card

Right you are! Sorry didnt realise that's what it did, haha.

Im glad I could help 

Roman, i dont get the problem with the Sticky DOF. As soon as you Enable Exp. Override it changes the Aperture right after you dialed it in. Where's your problem?

Wanna see something odd?

Although my card (Transcend 16Gb 1000x) performs pretty similar in the benchmark i get ~47 MB/s while Recording RAW. I dont get this. I tested soo many settings and none of them are leading to any performance increase

When you set Exposure Override to ON it automatically overrides the exposure simulation. Also disable Movie Mode ... Raw video works without having it enabled.

And turn OFF Exposure Lock and Exposure Presets

Well, Exposure Override does the job for me. Just set it to ON. ML now also controls the Aperture, so there also should be no need to activate the sticky DOF.

Hello everyone,
have been doing some testing and i would like to know how is your workflow from shooting to final video.
So, i capture the movie. use raw2dng to convert to dng, open the dng in after effects which opens camera raw and i make my adjustments in a supossed to be (14 bit) file. then when e edit the video im not getting the dinamic range that a 14 bit image should give me. is there any software that makes me able to work with dng's at their full color depth? im using after effects but im sure there is another way around....

After Effects can handle up to 32 Bit float footage so 14 Bit raw is no problem for AE. Just make sure to change the composition settings to 16 Bits per channel. Press Ctrl+Alt+Shift+K to access that menu
(A standard AE composition has only 8 Bits per channel which equals a JPEG picture)

When you load the footage into after effects, click right on" interpret footage" and then "Main ...". In the window set the assumed framerate to 24 or 23,976 depending on which framerate you actually shot in camera

This is weird. I've been shooting some footage, the camera reached 45 MB/s with the Transcend 16 GB 1000x. But suddenly the rate dropped to 25 again. That is so strange. I didn't change any variables, why does this happen. Nevertheless I shot 30 seconds of footage in 1592x720 which im going to upload now for you to look at.

Hey Andy,

im already on 1.0.9. Installing ML would've not been possible if i wasn't already working on 1.0.9

There has to be another problem with the camera. Did anybody else encounter such a problem?

Cheers

Okay guys,

i'm a bit confused by the information which some of you guys posted earlier. I just recieved my Transcend 16GB 1000x Card. It performs excellent on my Transcend USB3 Card reader. Its writing with about 90 MB/s and Reading with about 120 MB/s (tested with ATTO).
When i pop the card into my 50D it performs like CRAP. Seriously ... It can barely reach 25 MB/s in the ML benchmark. I have noo idea whats wrong with the card or my 50D. Did anybody already test 1000x cards in the 50D? Im slightly disappointed because my 400x card already gave me 19 MB/s.

I still didnt figure out how do a silent burst. Is there somebody out there who could write a tutorial for inexperienced ML users? I think that would answer many questions in the ML community.

So how did menoc get a real movie recording on his 50D?