Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - koopg

Pages: [1] 2
1
Share Your Videos / Re: 5.7K anamorphic 5D Mark III footage
« on: November 15, 2020, 08:18:54 PM »
Bw: is there a chance that in my test this weekend I did actually had a color realtime preview @2.39 ?


Sent from my SM-N975F using Tapatalk


2
If any body is going to play, here are some more variation

₪ 28.09  18%OFF | 44PIN mSATA to 2.5" IDE HDD SSD mSATA to PATA Adapter Converter Card with Case 10*7*0.9cm
https://a.aliexpress.com/_BSk1K8

₪ 5.85  24%OFF | 1pcs High Quality IDE TO SATA PCI Card 100/133 HDD/CD/DVD Converter Adapter Drop Shipping
https://a.aliexpress.com/_B0deV2

₪ 149.71  10%OFF | CF card extension cord 50pin interface extension cable Industrial control machine tool equipment digital Storage card
https://a.aliexpress.com/_BOLOss

₪ 11.43  31%OFF | mSATA SSD To 44 Pin IDE Converter Adapter As 2.5 Inch IDE HDD For Laptop
https://a.aliexpress.com/_BSeHEs

Let's shop together on AliExpress with new user coupons
Your ₪ 3.39 in coupons are here!
https://a.aliexpress.com/_BPYea8

₪ 337.99 | For IDE-CE IDE-CF MSATA M2 SSD adapter MRT gifts
https://a.aliexpress.com/_BSzk3O



Sent from my SM-P905 using Tapatalk


3
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: October 17, 2020, 11:49:45 PM »
Is there anything new besides 38fps preset that you need us to test over yesterday build ?

Changelog?

Sent from my SM-N975F using Tapatalk


4
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: October 09, 2020, 04:18:07 PM »
I will later on this weekend.
Say, I can't remember user name but i was reading the liview refactoring project thread
And gave a try yesterday to enable UHD 1:1 liveview
Was playing with regs and could see things changing, for instance i have started seeing thing but lost it.
Then something happened and I had to power cycle the cam.
When it came back i could not remember which one was it, spend 3 hours trying with no luck.

Couldn't understand the routine logic behind when to tweak what.
Do you have any clue which regs could be the needed regs to make this happen.

I don't mind to invest time in it, just need a lead.

Sent from my SM-N975F using Tapatalk


5
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: October 06, 2020, 10:51:31 PM »
I have managed to get this with danne. under exposed
Low light above 400iso
Its getting worse every iso bump
On iso800 looks like in the pic
At 1600 ita all lines
3.5k 16:9 and 2:20
In all bitdepth

Its also happening if you dual iso and not on 16:9


So i am gessing  iso issue

6
Hm... sorry... I really don't know what to do with these numbers. There is no relation or equation or something. The question is who does what with these settings?
Thank you for replying.

I thought it would be strait forward
In most cases
Example:
HueAdjustmentAqua = -17,
HueAdjustmentBlue = 10

I will try to research more

Sent from my SM-N975F using Tapatalk


7
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: October 03, 2020, 03:12:27 PM »
 :D


 :D

5d3 1.1.3 magic lantern
Helius 44-2 F2 1/48
Build: Denna's crop_rec_4k_mlv_snd_isogain_1x3_presets_2020Sep14.5D3113
3520X1730 16:9
14bit lossless
 :D Dual ISO
card spanning on
SD card overclock 166hz

8
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: October 01, 2020, 12:56:32 AM »
Hey Danne!

I'm a big fan of your work and currently using your latest build.

I don't have a mac so I couldn't use your "switch mini" app to stich my spanned file.

Could you please make a window version so all of us window user can also try out this feature?

Thank you so much!
Download mlvapp for windows
Just import the files and extract

Sent from my SM-N975F using Tapatalk


9
along time ago I've asked for "spydercheckr 24" presets file support for nailing color from within mlvapp
some dev asked for a file example.

this is the preset file content made for lightroom
Code: [Select]
s = {
id = "C77A6296-B58D-0B4D-94CC-2140587CC5BC",
internalName = "<NameOfPreset>",
title = "5D3Helius44_2_InSide_Day_Portrait",
type = "Develop",
value = {
settings = {
ConvertToGrayscale = false,
EnableColorAdjustments = true,
HueAdjustmentAqua = -17,
HueAdjustmentBlue = 10,
HueAdjustmentGreen = -20,
HueAdjustmentMagenta = 16,
HueAdjustmentOrange = 0,
HueAdjustmentPurple = 12,
HueAdjustmentRed = 2,
HueAdjustmentYellow = -2,
LuminanceAdjustmentAqua = 0,
LuminanceAdjustmentBlue = -15,
LuminanceAdjustmentGreen = -10,
LuminanceAdjustmentMagenta = -10,
LuminanceAdjustmentOrange = -4,
LuminanceAdjustmentPurple = -9,
LuminanceAdjustmentRed = -14,
LuminanceAdjustmentYellow = -6,
ParametricDarks = 0,
ParametricHighlightSplit = 75,
ParametricHighlights = 0,
ParametricLights = 0,
ParametricMidtoneSplit = 50,
ParametricShadowSplit = 25,
ParametricShadows = 0,
SaturationAdjustmentAqua = -17,
SaturationAdjustmentBlue = -10,
SaturationAdjustmentGreen = -7,
SaturationAdjustmentMagenta = 0,
SaturationAdjustmentOrange = -14,
SaturationAdjustmentPurple = -11,
SaturationAdjustmentRed = -4,
SaturationAdjustmentYellow = -7,
ToneCurve = {
0,
0,
32,
22,
64,
56,
128,
128,
192,
196,
255,
255,
},
ToneCurveName = "Medium Contrast",
},
uuid = "AFC5AB6B-ECC4-7648-AA9C-F37C5728F57C",
},
version = 0,
}
is this possible to add this possibility ?

10
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: September 28, 2020, 12:35:02 PM »
I will just place that here :)

Sent from my SM-N975F using Tapatalk


11
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: September 27, 2020, 01:11:34 PM »
170 card working !!!!!!!!!!!!!!!!!!! wow

cooooooooool
Quote
Yes, unfortunately the 170Mb/s card seems the only stable one for these regs.
I am sorry I don't have more time to spend here. Maybe there could be another patch working better here, probably is, but I am not the one that could help here atm.

dont you ever be sorry to any one here !!!! you are the king

I was running this morning to get a true sdxc type 1 - the 95mb/s one
I thought this would be the key lol.

so I still didn't get answer for to the none OverClock method

should I expect more then 20mb/s ? - Is this really a set of faulty cards that I have ?
* again on pc it has 80+ mb/s

12
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: September 27, 2020, 12:12:42 PM »
Please note the first rec was stopped by me, my fingers is out of frame.

But this is whats happening when i enable sd oc

The last sd card i bought  from this morrning

Sent from my SM-N975F using Tapatalk


13
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: September 27, 2020, 11:39:17 AM »
I will be happy to share my screen capture,
but where is the sd patch thing ? are referring to SD OC option it self ?

when ever I enable OC the camera will not take 1 frame.
I press rec and its sat automatic  stop

steps:
1.  shot a video on 3.3k 16:9 I can do it for few sec - 7-10
2.  goto menu, enable SD OC
3. reboot camera
4. wait for patch done msg
5. hit rec
6. no frame is taking


then I need to reinstall ML because it would keep tell me that camera did not shut down properly
even if I disable SD OC

ok making a video to show you


14
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: September 27, 2020, 11:12:31 AM »
benchmark frim ML menu (1min)
results for any of my 10 cards will not go over 20.8MB/s
 
I did try oc
BUT NOT REBOOT  :o

trying again...

but still did I understand wrong ? are guys working with your SD at rates higher then 20 ?
my SD does write 80 MG on my pc, I know its not 1 to 1 thing, but I see couple of posts up
claims for cheap SD to do 35Mb
and before a guy saying 55MB

so I need to know if I need to buy 50 more cards to maybe get fast one



15
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: September 27, 2020, 10:10:30 AM »
sd CARD will not go over 20M/s
Just bought a new one
none of them will go over 20mb/s

how do you guys do that ?

pepole talking about 60MB/s and saying bad one would reach 35mb
but I have 7 san disk ranging from 95/mg to 170/m
some from amazon
and a brand new one from 10 min ago from local store
20MB/s

please some one tell me what is wrong

16
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: September 26, 2020, 02:27:53 PM »

Update: I found most of my issues.

1.  I see you guys talking about 3k 1:1 (NO x5) - When i do that i have a pink screen and now record, only when X5 i can shoot 3K1:1, is this normal ?
2.  I remember danne earlier builds of which I could lower 3.5k bit rate to 12 losless, but now ML menu claim it shouldn't be done on large pixel ?

1.1.3
5d3
2020Sep14

I am getting great results from what does work using card spanning is wonderful

18
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: February 19, 2020, 08:41:14 PM »
I would like to try and correct my bad english.

I lost (died) a card (CF KB128GB) this weekend due to a format (usnig canon manu)  when the card was full.
After format the card it became un accessable from any system.

Was testing a scene, recorded few sampales
And for unknown resone I got a massage saying card full
I didnt gave it much thinking and went strait to format it from canon manu.

Maybe formating the card right after recording is a bad move ?
And a shutting off the camer and let is rest before  would lead diffrent results

Sent from my SM-N975F using Tapatalk

19
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: February 19, 2020, 05:30:55 PM »
I woukd like to add
If you remember in the begging of the week
I told you my card die
It was a cf card
And after  a few tests o wanted to format the card to record my actuall takes
So i format it and %×@@#@ a big explotion happend
No just kidding, no explotion just a died card

Could it be a good tip to not format the card?

Sent from my SM-N975F using Tapatalk


20
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: February 18, 2020, 12:33:27 PM »
Thanks

How did it die?
I use transcend. Never failed.

Pressing record and its gone, will not recognize by any system

Can you tell me which type and does it do 3.5k with danne build ?

I use Lexar. Maybe it's not a top speed but a solid proof for many years

Same .. you are saying that its not top speed, but does it work with danne build 3.5k raw on 5d3 ?

Sent from my SM-N975F using Tapatalk

21
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: February 16, 2020, 02:59:34 PM »
Can i go a bit off topic here ?
I hvae bought a KB 128Gb from amazon
I have used it twice and yesterday its simply died.
I want to buy a new card, but KB feesls like out of the question with this type of quilty.
So, is there anything else to use on a 5d3 with more or less the same speeds but more reliability ?
 Used cases are danna builds 3.5k raw o  a 5d3

Thanks

Sent from my SM-N975F using Tapatalk


22
It creates a DCP file @koopg? Currently there's no way to input DCP files in MLVApp. Are you using this to get correct white balance? Try a simple 18% gray card... MLVApp has a WB picker.

I requested this before here and here, but upon some reading of the RT code, the Lab feature requires many core functions. Might be really difficult to adapt it to mlvapp.
@2blackbar The feature CIECAM02 in advanced tab can be a better way to bring correct saturation to shadows. Instead of using a "film-like" curve, try to increase "Brightness + Colorfulness (QM)" in CIECAM first. From my tests, this method of correcting exposure adapts shadow/highlight saturation very well already. Sometimes it's not even necessary to use Lab adjustments...
Not just white balance
Its making all colors acuurate.
You are going to have true colors
So i can batch have all clips true color
Ready to be grade evenly

Sent from my SM-N975F using Tapatalk


23
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: December 31, 2019, 10:06:29 PM »
I meant something else. not focus and not zoom.
in the experimental buildm my preview was realtime and when press+Hold '*' I get framing preview .
the change you suggested does help with the x10 but not bringing back old method. maybe it was a settings I did some how and don't remember how.
but I can totally live without it.

I made a few more test, and everything work like charm.

this build is the best new year  gift :)
Happy new year


24
crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: December 30, 2019, 09:51:05 PM »
just download an tested crop_rec_4k_mlv_snd_isogain_1x3_presets_2019Dec30.5D3123.zip
5d mark 3
version 1.2.3

I am really impressed.

my 'C' days are over long ago, (I do python as a qa automation developer)
I never was a videographer, only stills.
my English should get better
and when reading here I can understand one every two sentences
so please forgive me in advanced

the only issue
experimentals and your build from April (I belive) as well gave me an option to set live view and when pressing '*' I could frame my shot
it worked on all profiles. however on this build when pressed I get a x10 zoom which will not go away after release, and if I pressed many times on '*'
and the 'zoom' button It went away but image is broken, ML menue will not open an nothing else is working until restart

thank you so much for this it's all really  amazing that I don't really care if this would be fixed
5k raw video from 5d3, and continueas, and live view ! what else it would shoot rockets to space :)


amazing! !!!!!!!

few questions. . .

what is 'crop rec preview'  should it be on?
why in video menu it say '12 bit' and raw video menue say '14 bit'?
what is 'shutter range' I never sew this. logic tells me variable fps but didn't we had this all ready  ?
what iso is optimal?

and last I do not own anamorphic lenses, I shot my doter using the anamorphic 5k and let mlvapp do its own streaching magic
I don't see distortion and the frames look AMAZING, do I need an eye doctor ?
is it disorted in a way I don't see it ?
what am I missing ? 




25
great app first of all.

recently I have bought a spider color checker.
it comes with a software that can export color profile for you cam + lens after taking a raw picture of a color plate.
this could be achieved using a  stand alone software or a plug in for lightroom.

is there a possible way to use this color profile under MLV app ?

Pages: [1] 2