Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - ultimatemale

#1
This is definitely one of the best i have seen so far
What lights did you use?
#2
Quote from: masc on May 01, 2018, 09:33:25 PM
Sorry, I can't tell you how safe it might be. But if I hear "experimental", I wouldn't think first it is "stable". You might have luck and it works brilliant (what often is the case), but maybe it doesn't ;)

Thanks for the reply dude
#3
Quote from: masc on May 01, 2018, 08:44:56 PM
I debugged with your file now: MLVApp is right, when it tells that it is corrupted. It includes a MLV block named "È\0"... that is not defined in the mlv definition. In past we ignored such blocks, but this was not always safe, if I remember right. I tried ignoring via a small code change and MLVApp did not crash and I could open the file. Maybe you should try another nightly build, which does not produce such errors (whyever it does, I am a noob here).
@bouncyball: is it possible to safely ignore such corrupted blocks in files, in a way we can be sure MLVApp does not crash?
--> video_mlv.c line 1450 and following...

Thanks a lot dude

In your test would you say the new 4k Experimental builds are quit stable for recording 1080p RAW? Bcus if it is then i might as well just stick with it instead of still using the old usual Nightly build which only does 1080p.
#4
Quote from: masc on May 01, 2018, 06:55:33 PM
Thx, I'll have a look. @bouncyball: could you also check what happens? File error checking was implemented by you ;) ... you're deeper in this than I am.
Cheers dude, awaiting your response
#5
Quote from: masc on May 01, 2018, 06:15:25 PM
What happens, if you only open this one single file?
Edit... ah, does also not open. Then please upload this file! ;)


https://drive.google.com/drive/folders/1K8DNFBCgiYBCglxdZe_ZsAA1QFhHTWU_?usp=sharing
#6
Hi guys everytime I opened a folder (from a full 64gb card) and drag the whole clips into MLV APP, for some reason it won't accept the LAST clip in that folder (it ckeeps saying its corrupt). Am talking about clips recorded with the usual MLV RAW build(not this new 4k RAW build)
I have tried opening just that LAST clip alone in MLV APP it still won't (its always the last clip on every full 64GB card folder).
I know its not corrupt because RAWmagic is able to open and convert these files

Anyone having this same issue?
Would you like me to upload a link for you to download and try?

I shoot on a 5D3 With old build from (wwhich work fine)



LINK
https://drive.google.com/drive/folders/1K8DNFBCgiYBCglxdZe_ZsAA1QFhHTWU_?usp=sharing

#7
Quote from: masc on April 06, 2018, 02:52:48 PM
What happens if you only open this file? The same? If yes, please upload it!
When i try opening just that file alone in the new MLV App, it says corrupt. It also happened with some other clips in other folders. Pls bear in mind these are files recorded in the usual MLV RAW build (not the new 4k build)
The files recorded with the 4k build all open fine though
#8
Quote from: masc on April 05, 2018, 09:42:28 PM
I am very sorry, but I can't reproduce that. In your picture, the message wrote about a file which were already opened. So somehow you try to open the last file twice...  ::)

It opened every file except for the last file and it says its corrupt (i only opened it once). But RAWmagic opens this file, so i know its not corrupt
#9
Quote from: masc on April 05, 2018, 02:10:32 PM
@ultimatemale: nope, never saw this. MLV App does not allow dropping folders... so you only drag the files in a folder? No problem for me. Could you please explain how exactly you do that?
I opened the folder and drag the whole clips into the app and for some reason it won't accept the last clip in that folder. Am talking about clips recorded with the usual MLV RAW build(not this new 4k RAW build)
#10
Loving this new app but issue am having with it is when i drag a whole folder into it, it never accept the last recorded clip on the card. Anyone experiencing the same issue

Am on a mac and experiencing the problem with version version 14 and 15 of this app








#11
Raw Video / Re: CF CARD FORMAT WITH EL CAPITAN OSX
November 05, 2016, 06:55:51 PM
Anyone tried macOS sierra yet? Does it have the same problem when formating to exfat in disc utility?
#12
Thanks dude...very helpful of you
#13
Can you please provide links to these converters pls. Maybe the MLVFS
#14
Yes i still have them. Am editing on a 27" imac 5K
I converted the files with MLVMystic
#15
Can someone please link me to a tutorial or tell me how to automaticaly link all MLV audio to footages pls. There's so much footage and i can't be bothered to link them all manually. Am using DaVinci Resolve 11 lite
#16
I edit on an imac so i export out as ProRess422. Will try bringing audio into Resolve
#17
Quote from: mohanohi on January 01, 2015, 07:08:18 AM
So you want to use Premiere as finishing tool.. What i do is bring all the final cut from premiere to resolve via XML and do finishing in Resolve. If there any AE files, i render it out and place in resolve so that i get precise color. For DCP i render as j2k, for any other Bluray/DVD/Youtube i render it out DNXHD 220 mb and then do authoring in either premiere or AE.

I would like to do that too but am quite new to resolve and when i export xml from premiere, for some reason i can't access the sound even though i can see it on the time line
#18
Raw Video / Re: My experience shooting with ML for 2 days
December 30, 2014, 11:04:57 AM
@mohanohi, I send back to Premiere after grading so i can add some of my GoPro footages, text and also apply some effects too
#19
Thanks for this

A problem i ran into during round tripping

I successfully send an XML to resolve (from Premiere cc2014) for grading, but when i tried sending back to Premiere cc2014 after grading, Premiere cc2014 would not accept the XML created by Resolve. FCP7 and Premiere cs6 would accept it though. So not sure whats going on there.
Have you encountered this issue?
#20
Raw Video / My experience shooting with ML for 2 days
December 29, 2014, 05:23:36 PM
So i filmed a 2 day music video on the 5d3 using ML RAW (NOT MLV)and not one corrupt file

Equipments-
Canon 5D3
Canon 24mm 1.4
Canon 24-70mm 2.8
Canon 100mm macro
Canon 85mm 1.2
Canon 70-200mm 2.8 IS
Two Kumputerbay 1000x cards and one lexar 1066x (lexar card was really good expecially with slow-mo)
Mashall monitor
Phantom 2 drone with GoPro 4 black
Build was one of the August one's (can't remember now)
Canon firmware is 1.2.3

I had no problem with continuous recording even with my Mashall monitor connected via hdmi
About 600gb of footages and not one corrupt file (made sure to format with computer to exFAT). Had corrupt files in previous shoots bcus i fomat in camera
I shot ML RAW and not MLV as i didn't really need sound (its a music video). Also heard that MLV isn't as reliable as ML RAW
Had my new imac5K on site so dumping files from cards was really fast (less than 15min to dump a 64gb card)

Normally with my Kumputerbay cards, i tend to record between 1min to 4min when shooting slow-mo before it stops (at 1920x818 50p) but the Lexar card gave me continuous


I used RAWmagic lite to convert my files to dng
Used DaVinci Resolve 11 lite for proxy conversion and grading
Edited with Premiere cc2014


Problem
The only problem i ran into was during round tripping back to Premiere cc2014 from Resolve
I successfully send an XML to resolve (from Premiere cc2014) for grading, but when i tried sending back to Premiere cc2014 after grading, Premiere cc2014 would not accept the XML created by Resolve. FCP7 and Premiere cs6 would accept it though. So not not sure whats going on there.

I can say am really really happy with the way the shoot went. One thing i'll definitely do from now on is make sure to format my cards to exFAT with my computer and not in camera


A screen grab of one of the footages









This is a video i shot using ML RAW some months back (had some corrupt files whish i repaired later)









#21
Share Your Videos / Music video (Shot in ML RAW)
August 13, 2014, 12:29:49 AM
ML-RAW
1920x818 for both 25fps & 50fps
Canon 5D3 1.2.3
ML build March 17th
Converted with RAWmagic lite
Graded with DaVince Resolve lite 10
Edited with Premiere cs6



Screen grabs








#22
This is a video tutorial to show you how i fixed the corrupt ML files that comes out looking black and green
Shot a music video on ML-RAW (not MLV)
Canon 5D3 1.2.3
ML build March 17th
Converted with RAWmagic lite
I use an apple Imac

#24
Quote from: Audionut on May 18, 2014, 10:25:58 AM
Did you try following this?

I want to follow it but i dont know where specifically to type that in. Where in the screen grab below do i put it?

Really really sorry for sounding so dumb but i have never used exiftool ever and no really little about computers.

#25
I opened terminal after installing exiftool and got this-



Can someone please tell me what to do now.


I know nothing about coding but if you can tell me what to type in there and where to type to help fix the dng files it would really really make my day
i desperately need to save these footages