Messages

Ok, thanks very much for all the help guys. I've just contacted a repair service here in my town. I thought maybe I could fix it on my own. Anyway, thanks again!

ps the starup logger doesn't work.. bummer

I've managed to get the portable display test to work. It lights up the lcd backlight even with the power switch set to off, and that's it. No info on the display, just the light and a stuck pixel 

Right now the LCD is not working at all. Not even the back light is powering on. The card is prepared for ML. Right now it's got the settings from when it worked, I've tried without ML on the card, I've tried EOScard, I've tried with the software update on the card and nothing, it will not power on. The LED light flashes whenever I insert the card and the shutter does work 6 times before showing busy message in the viewfinder but the photos won't appear on the card. And sometimes when on Auto mode the flash will fire, and on other modes the flash trigger works and the flash fires on half button press. Something that bothers me is that the shutter will not work if I had the card and the battery in the camera before I've turned it on. It works only if the card was in the camera and I removed and reinserted the battery or if the card wasn't in the camera and while I leave it on I put the card in it will still work a bunch of times before, again, showing the busy message.

I went I bought an mini HDMI adapter to try and see if anything happens and still nothing. I'm pretty stuck basically..


best online image hosting

No the test didn't work. The display didn't show anything. Worth to mention that this morning after leaving it all night without the battery or the card in it after I inserted the battery and turned it on the display turned on but it didn't show anything on it and the Live View button did move the mirror when I pressed it but the display didn't change . Whilst it was still on, I inserted the card and it went back to the previous behavior. 

Hello. I seem to have a problem with my 700D. I installed ML a bunch of times, on different cards even one formatted fat32, one exfat32 (didn't know the difference at the time). Yesterday the camera was working, with issues but working. Today it won't start. After much fiddling around I discovered that it's not completely dead. The shutter does work, the flash works, the LCD doesn't. If I leave the button to on, remove the battery and then re-inserted while is still in ON position the shutter will work for 6 or 7 times, the focus works, changing the ISO aperture and shutter speed does work while looking through the viewfinder. Please help me if you can. I hope it is a booting issue because the symptoms are the same with or without the SD cards. Thanks!