Messages

If you format the card it removes it. I've switched cards before and it runs normally like if ML was never installed it seems to me.

You must to format it in the PC, the camera will left the ML files

And googling?

site:magiclantern.fm/forum "Error 2"

After my holydays I'm here again to help testing

And wait, this was from simple???

No, it's from full-res. With simple parameter it seems that there is no problem.

Ok, updated it, can you check again, also check if the overlay for Histogram and focus peaking in Photo Review mode are aligned since that is what this test was really for?

Review mode overlay it's aligned.
Silent.mo gives error at full-res

Thanks a lot for your time

I didn't see another DNG generated with the misalignment (corrupted)

https://drive.google.com/file/d/0B2UvFnfao5GKQ3RDMTlhcEtaTmM/view?usp=sharing

All I could get it's a black DNG (RGB values 0 or 1)

And then...



I cannot repeat this behavior

I'm trying with simple (not full-res) and half shutter works fine in LV, but it closes the review mode.

M 1/10 f2.0  ISO 100 RAW LV Full-Res DNG

I updated build, can you download it once more and see if you still get raw_error for full res silent picture?

Same error 

Raw error. No file created 

I was testing the last changes and I've seen two problems:

The zebra/focus peaking is misaligned at image review mode (immediately after shooting). Even if the image is displayed with canon histogram and photo info the orverlay covers all the screen (not only the thumbnail)



Using my CZ Distagon 28/2 (C/Y mount + adapter + AF chip) I have ~ -3 stops at LV screen compared to the actual photo, so zebras, histogram and image references are useless. That's for photo, Movie mode (manual, same parameters) LV looks correct.

I've tested also with and old 28-80 USM without problems with LV (overlay problem persists). I don't have my L lenses here and the other two Zeiss primes for testing now

From my test along with my SD Card from kit, I think is about 16-17Mb/s so I gess the limit will be at 864x486 or 960x540 at 24/25fps. Similar to 500D, 550D, 600D and 60D

Do you know what's the maximum write speed of the card interface?

Finally I have a working compiler

About last build:
- ETTR hint at histogram disappeared
- Dual ISO video doesn't work
- Not enough memory if lua module is enabled

I can't reproduce the frozen screen bug, but  A1ex' procedure (startup pressing SET) doesn't boot ML

Has anybody added a mic input in the 1100D/1200D/1300D.

The trick is soldering a jack input using the internal mic wires, and drilling a hole in the camera body

I've done other camera hacks (300D mirror repair, Nikon D50 IR or 350D IR), but I would like to know other experiences from these models (specially 1200D)



A bit of literature (500D)
http://www.instructables.com/id/Add-external-Mic-jack-for-Canon-T1i500d/?ALLSTEPS
https://docs.google.com/document/d/16M8_vzwAVrhhu8uGgZcbKfx4moTB-EBN-nuHmyhljU8/edit?pref=2&pli=1
https://www.youtube.com/watch?v=WKNREMo924E
https://www.youtube.com/watch?v=1wuBqc4tRzw

I confirm that about ML Menu.

When auto exposure in Video is disabled you can invoke the menu via the Av Button (also you can compensate expo +dial), but in manual mode this button only works for aperture.

Build 27Jul16 19:01 UTC

Test

Code Select Expand

[FAIL] MEM(dialog->type) => 0x6e4944
       GUI_Control(BGMT_MENU, 0, 0, 0); msleep(500);
[FAIL] HALFSHUTTER_PRESSED => 0x0
       SW1(0,100)

Peaking / False color alignment: OK
Magic zoom: OK
LV tint: Not resolved

Modules files copied from previous version

Code Select Expand

[FAIL] MEM(dialog->type) => 0x6e4944
       GUI_Control(BGMT_MENU, 0, 0, 0); msleep(500);
[FAIL] HALFSHUTTER_PRESSED => 0x0
       SW1(0,100)

As said, now the time is ok (was -2h before)

I don't have this tab (red square) in the new version. Didnt saw messages



ML menu button is used for set aperture in video

A very stupid question: Can I invoke ML menu in Video mode? I can't do it via AV-Comp-Trash button

Does magic zoom work in the build with the timer test for anyone?
http://www.magiclantern.fm/forum/index.php?topic=12627.msg170298#msg170298

Figured, but does anyone know if it did anything for the clock in this new build with stub fix for Alex?

Modules tab disappeared so I cant test Time is OK (was -2h in GMT+1)

More tests - with canon kit card (body + 18-55II + bag + card)

I can confirm magic zoom works ok and that problem with green LV. Contrast adjust also gives a green (low contrast) to magenta cast (high contrast)

Mk11174 version

Focus peaking/False colour seem to be well placed 

[Overlay Menu:]

26Jul16 15:43

Overlay Menu:

Works:

• Zebras (only highlights)
• Focus Peak
• Cropmarks
• Ghost Image
• Spotmeter
• Histogram
• Waveform
• False color

Doesn't work:

• Magic Zoom
  (disabled)
• Zebras - lowligth
  (shows nothing?)

Stub test fails. no crashes after finishing the test

Code Select Expand

[FAIL] MEM(dialog->type) => 0x6e4944
       GUI_Control(BGMT_MENU, 0, 0, 0); msleep(500);
[FAIL] HALFSHUTTER_PRESSED => 0x0
       SW1(0,100)