Messages

Good afternoon. Is it possible in ML to control the speed of autofocus in the video mode, as in 70D in the standard firmware? I use mostly manual autofocus, but sometimes in traffic when shooting shooting is very short of normal autofocus.

Good evening. I would like to know if there is still a problem with the black 5/5: stdev foo large (19394/100, ref 2577/100)

I was wrong, the problem persists. in low-light bug is still there.

interesting. today I come home from work one more time to test the new firmware and the old. On the results will unsubscribe. A few hours today tested the new firmware. everything works fine.

today confirmed the operation of the new firmware, now everything works without oshibok.ogromnoe thanks for fixing the problem.

on canon eos 600d everything works fine in the latest firmware . is there any solution to this problem in the new assemblies ?

https://yadi.sk/i/OI0WdxJVtZpEY
https://yadi.sk/i/e1Uhf2KjtZpEa
https://yadi.sk/i/MTh8E8ETtZpEc
https://yadi.sk/i/XABuUkn9tZpEe
https://yadi.sk/i/mqJ7UMq7tZpEg
https://yadi.sk/i/DdXCfT9dtZpF5
https://yadi.sk/i/rn5vhrH3tZpFT

https://yadi.sk/d/xOEVJxj3tUbSz

in magiclantern-Nightly.2016Apr11.700D114.zip firmware do not appear line black 5/5: stdev foo large (19394/100, ref 2577/100)

and it works in all lighting conditions.

Good day to all. I'll start from the beginning.
1. take off your bad files https://yadi.sk/d/u_RDmldQtUJpR
2. assembly magiclantern-Nightly.2016Apr11.700D114.zip no errors, and since Date: 2016-04-12 03:12:20 +0300 fly error.

3. have a lead. If the scene is bright, everything works just fine. But if the light cycle appears in the frame is small, the debugger and the error takes off
black 5/5: stdev foo large (19394/100, ref 2577/100)
black 5/5: stdev foo large (19394/100, ref 2577/100)
black 5/5: stdev foo large (19394/100, ref 2577/100)
black 5/5: stdev foo large (19394/100, ref 2577/100)

once in the frame appears more light, the error disappears.

yes I can.
Coming home from work and throw off files to the forum.

new assembly is not checked, the camera only in the evening to be with me.

through silent and make a photo throw you.
or a course of action?

whether different hardware on my 700d and above?

all I tried to standard settings only raw_rec or mlv_rec.

on Date: 2016-02-13 04:12:35 +0300 there were no errors, but the frame rate at a value of 2 frames per second 11 frames vseravno remained on the debugger.
I come home, check it later.

and I wanted to find out what these words mean in the cycle?

black 5/5: stdev foo large (19394/100, ref 2577/100)
black 5/5: stdev foo large (19394/100, ref 2577/100)
black 5/5: stdev foo large (19394/100, ref 2577/100)
black 5/5: stdev foo large (19394/100, ref 2577/100)
.................................................. ......

as soon as this begins the cycle, after which the error occurs (DETECT RAW ERROR)

loop occurs when setting the value 8azy and below.

such vchechatlenie that is a ban on below 11 fps.


h 264 writes properly without errors

all did, to no avail. Problem If only I then can close the topic, I will shoot on canon eos 600d

I did a firmware update, sblos. nothing helped

with the assembly magiclantern-Nightly.2016Feb13.700D114 also noticed that if you set the recording speed of 2.5 frames per second, but the debugger frame rate is 11, and the error (DETECT RAW ERROR) no.

Video frame rate is also higher than for the debugger 11, to put the 10 settings.
If I correctly understood,

at frame rates of 10 and above all works. but if the frame rate is below 7, the recording does not start.

no other errors.

I would like to learn more. when updating nightly build to newer or vice versa if you need to update the boot loader in the camera or not?


maybe the problem is that have not updated it. Only updated files themselves.

Then after work, do a hard reset, update the firmware loader re-set and accomplish your goal on the results.))

though everything works at old assembly normally
Please try to update the native camera firmware and reset the loader.

matter in that. that there is only an error of DETECT RAW ERROR.
and in a debager in a cycle lines run
black 5/5:.................................................................
on eos 600d everything works remarkably at the last night assembly.

whether there can be it the hardware problem? or it is improbable?

yes, was. silent in the mode of a photo works normally.

and problems begin with raw_rec and mlv_rec together with fps.

everything works for magiclantern-Nightly.2016Feb24.700D114.zip well.

https://yadi.sk/i/qFRFCjnGtQy5F

https://yadi.sk/i/_sGkYNqutQxKY
https://yadi.sk/i/yMTxDZVVtQxKc