Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - mapline

#1
Camera-specific Development / Re: Canon EOS M
July 13, 2016, 07:59:56 PM
Hi
Use
* 1 -> locks only focus by * button.
  Pressing half shutter button ( and hold) will meter and  toggles AE lock with * showing on left next to lens info  when locked.
  Release half press again releases lock * then meters, press again will meter and lock again with * on half press.
  Take the picture on continue to full button press.
At least this is on my camers
#2
Hi
As this has not been taken up yet is it possible that LiveView Zoom x10 option could be added just when the focus ring is turned regardless of focus mode ( ie AF, M,or M+AF).
If it is limited to focus ring action it would not affect AF?
Many thanks in anticipation.  Anything I can do to help?
Michael
#3
Camera-specific Development / Re: Canon EOS M
July 12, 2016, 01:56:46 PM
Thanks for the further explanation which I can understand and makes sense.
#4
Camera-specific Development / Re: Canon EOS M
July 10, 2016, 01:50:02 PM
Thanks for replies, at least I know its not just my camera!
#5
Camera-specific Development / Re: Canon EOS M
July 08, 2016, 11:35:31 PM
Hi from he (Michael)
Reset camera to defaults
Formatted card and reinstalled ML
Same results PPM file 1 good other blue


Camera and ML working fine except screen print. Loaded PPM files to Adobe CS6 to convert to jpeg
Thanks for your time
#6
Camera-specific Development / Re: Canon EOS M
July 08, 2016, 04:50:59 PM
Hi
magiclantern-Nightly.2016Jun13.EOSM202.zip
Built on: 2016-06-12 23:08:10 +0100
Changeset: 90fe6de
Many thanks
#7
Hi
Problem first image perfect (B&W)but if I do a another screen from info button  I get coloured background (light blue) not B&W.
Tried reformating , reinstalling ML, different card but no change!
Can you please tell me what Im doing wrong?
Opening in Adobe cs6
Thanks




any guidance?
#8
Is it possible to limit x10 to just when focus ring is turn ie then if will not apply on auto focus?
#9
Hi
Thanks Walter as I was expecting more than a single digit!

So A1ex
Result of each focus mode is:
AF = 0
MF = 3
AF+MF =0

If it is a problem that AF and AF+MF are the same at 0 would it be a problem to make "LiveView zoom tweaks > Zoom" to apply to all focus modes which is the same as Magic Focus?

Please advise how I can be of further help
Thanks Michael
#10
Hi
As only programming is in various basic's and VBA I have to start to learn C.
However as I only need data from 3 focus modes thought I may be able to include  in hello.lua script.

Hence
-- A very simple script.

function main()
    menu.close()
    console.show()
    print "Hello, Michael!"
    print "Press any key to exit."
   print(camera.af_mode)
    key.wait()
    console.hide()
end

keymenu = menu.new
{
    name = "Hello, World!",
    select = function(this) task.create(main) end,
}

But it did not show any data. Obviously not correct syntax!

Any help please to be able to get data?

Thanks Michael

#11
Hi
Got a bit further as found luna mode in ML.
Changed Hello World to Hello Michael. OK
Please can anyone help me on code for printing the values of camera.af_mode from a Lua script?
Thanks Michael
#12
Hi
Will be glad to provide info required.
As new to this can you direct me to a post that provides info of how I can get and print values of a Lua script?
Thanks Michael
#13
Hi
First thanks for all the hard work that has gone in to ML as I am benefiting as a new user.
Learning more as I progress.

On M like AF+MF setting as it works really well I find.  Magic Focus set to focus ring only works well with *Back focus.

However when I worked out how to use LiveView zoom tweaks > Zoom x10 and set it just to focus ring FANTASTIC!.

Problem it only works in MF not AF+MF!

Please is it possible to change LiveView zoom tweaks > Zoom x10 and set it just to focus ring to work in AF+MF setting?

Then you have the best of both worlds AF on *Back focus and MF with x10 zoom on focus ring.

Many thanks Michael
#14
Camera-specific Development / Re: Canon EOS M
January 26, 2016, 11:44:05 PM
Hi Licaon_Kter
Thanks for reply which I take it is NO to all possible amendments.
#15
Camera-specific Development / Re: Canon EOS M
January 26, 2016, 05:11:53 PM
Hi
Tried  magic lantern and getting along well. Thanks so much for all the hard work.
Just a query if I may?
Like the use Prefs>Powersave in LiveView>Use shortcut key>INFO = Blank LCD screen.
However this stops the menu to change to AV/ TV/M etc unless it is changed back. Am I correct or is there another way?
Would be great INFO key could be like TRASH key short click one action hold ML menu. Don't know if the INFO key could be like that ie click blank screen/hold choice of camera setting?
Many thanks Michael
#16
Camera-specific Development / Re: Canon EOS M
August 02, 2015, 11:09:12 PM
Thanks Walter found them now. Will see if ML works on my EOS M.
#17
Camera-specific Development / Re: Canon EOS M
August 02, 2015, 10:53:59 PM
If I click on this button nothing happens. Right click says inspect element?
#18
Camera-specific Development / Re: Canon EOS M
August 02, 2015, 09:02:08 PM
Hi
New canon m owner and would like to try magic lantern but build says failed and does not show a download.
How can I download a working build ?
Many thanks