Dear A1ex,
First of all, sorry for the language mistakes, but I hope you can understand me.
I bougth a Canon EOS 60D from ebay and when I turn it on it shows Err 70. I read many topic on the net, where I find a solution to enter the menu (C mode). Sometimes works, sometimes not, but I can't clear the setting. When I change the mode to other than C, it is freezing. After more of searching I find this forum. I update the firmware to ML, but the problem is the same. Last time when it' works I enter one menu and change some setting. After saving it will not start, since only Err 70 and debug saving.
I read that you can analyze the debug files to determine the cause of the problem.
I ask you nicely, i need your help!
Here are the necessary data:
Crash00x.log:
Log00x.log
Very much trust in him, that you can help me in the solution of the problem, or you can tell me what is the problem with the DSLR.
Thank you in advance for your help.
First of all, sorry for the language mistakes, but I hope you can understand me.
I bougth a Canon EOS 60D from ebay and when I turn it on it shows Err 70. I read many topic on the net, where I find a solution to enter the menu (C mode). Sometimes works, sometimes not, but I can't clear the setting. When I change the mode to other than C, it is freezing. After more of searching I find this forum. I update the firmware to ML, but the problem is the same. Last time when it' works I enter one menu and change some setting. After saving it will not start, since only Err 70 and debug saving.
I read that you can analyze the debug files to determine the cause of the problem.
I ask you nicely, i need your help!
Here are the necessary data:
Crash00x.log:
Code Select
ASSERT: FALSE
at DevelopCombination.c:108, task RscMgr
lv:0 mode:0
Magic Lantern version : Nightly.2015Mar16.60D111
Mercurial changeset : ade831ff50e6 (unified) tip
Built on 2015-03-15 23:15:00 UTC by [email protected].
Free Memory : 395K + 1920K
Log00x.log
Code Select
Sat Jan 1 00:00:04 2000
0: 11.802 [STARTUP]
K287 ICU Firmware Version 1.1.1 ( 3.3.7 )
1: 11.871 [STARTUP]
ICU Release DateTime 2012.05.14 13:18:25
2: 12.228 [SEQ] CreateSequencer (Startup, Num = 6)
3: 12.492 [SEQ] NotifyComplete (Cur = 0, 0x10000, Flag = 0x10000)
4: 14.254 [SEQ] seqEventDispatch (Startup, 0)
5: 14.280 [STARTUP] startupEntry
6: 52.452 [PROPST] Initialize Adjective & Situation
7: 52.851 [HPD] # 1 0 1
8: 56.342 [PROPST] Clear Adjective & Situation (StartupCondition)
9: 56.783 [PROPST] AEMode New:0 Last:0
10: 56.877 [PROPST] Active Adjective & Situation
11: 56.996 [PROPST] ReqChangeCBR : Adjective 0, 0
12: 57.031 [PROPST] Not ExecMultiConvert Already None : Adjective 0, 0
13: 57.118 [PROPST] Not ExecMultiConvert : Situation 0
14: 57.184 [PROPST] CurrentAdjective 0 0
15: 58.885 [SEQ] NotifyComplete (Cur = 1, 0x20000002, Flag = 0x2)
16: 59.950 [PROPST] AEMode New:0 Last:0
17: 60.914 [PRP] Deliv WaitID = 0x80000001, 0xFF1B8BF8(1)
18: 62.842 [PRP] Complete WaitID = 0x80000001, 0xFF1B8BF8(0)
19: 63.065 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 1034
20: 64.402 [PRP] MovieParamData
21: 64.528 [PRP] mode 0 size 0x0 , framerate 0x19 , type 0xc zoom 0x0
22: 67.247 [PROPST] AEMode New:7 Last:0
23: 67.304 [PROPST] FromSaveTimming = 2(489)
24: 71.974 [HPD] CreateTask Master End
25: 73.562 [EM] emSlaveChangeCBR : AUTO_POWEROFF (1)
26: 73.731 [EM] emSlaveChangeCBR : UILOCK (0x0)
27: 74.231 [HPD] ERASE SW OFF
28: 117.318 [STARTUP] startupPropAdminMain : End
29: 117.485 [SEQ] NotifyComplete (Cur = 1, 0x20000000, Flag = 0x20000000)
30: 118.057 [PRP] MovieParamData
31: 118.198 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0xf zoom 0x0
32: 118.350 [PROPST] NTSC->PAL 0 25 12
33: 118.400 [PRP] fRetry mode 0 size 0x0 , framerate 0x19 , type 0xc
34: 119.037 [PRP] mode 0 size 0x0 , framerate 0x0 , type 0x0 zoom 0x0
35: 119.750 [SEQ] seqEventDispatch (Startup, 1)
36: 120.032 [STARTUP] startupPrepareProperty
37: 120.589 [FM] FM_Initialize (0, 1, 0)
38: 120.979 [FM] fmResultCBR (0x80e408)
39: 121.997 [FM] PROP_HDD_DCIM_PATH (/)
40: 122.221 [FC] FC_Initialize [drive:3][ClassID:39]
41: 122.454 [FM] PROP_CARD1_STATUS = 0x1
42: 122.590 [FM] PROP_CARD1_FOLDER_NUMBER = 142
43: 122.694 [FM] PROP_CARD1_FILE_NUMBER = 0
44: 122.854 [FM] PROP_CARD2_STATUS = 0x0
45: 122.968 [FM] PROP_CARD2_FOLDER_NUMBER = 100
46: 123.078 [FM] PROP_CARD2_FILE_NUMBER = 7158
47: 123.197 [FM] PROP_CARD3_EXIST = 0
48: 123.255 [FM] PROP_CARD3_STATUS = 0x1
49: 123.321 [FM] PROP_CARD3_RECORD = 0 => 1
50: 123.384 [FM] PROP_CARD3_FOLDER_NUMBER = 100
51: 123.473 [FM] PROP_CARD3_FILE_NUMBER = 0
52: 123.599 [FM] PROP_FILE_NUMBERING_MODE = 1, 0
53: 123.663 [FM] PROP_CARD_EXTENSION = 0
54: 123.730 [FM] PROP_CURRENT_MEDIA = 2
55: 123.793 [FM] PROP_USBDEVICE_CONNECT = -1
56: 123.862 [FM] PROP_NUMBER_OF_CONTINUOUS_MODE = 7158
57: 123.901 [SEQ] NotifyComplete (Cur = 2, 0x10, Flag = 0x10)
58: 124.035 [FM] PROP_DSDEFINE ModelId 80000287
59: 124.117 [SEQ] seqEventDispatch (Startup, 2)
60: 124.140 [STARTUP] startupPrepareCapture
61: 124.791 [RSC] hMemoryQueue (0x620010) hStorageQueue (0x640012)
62: 126.483 [RSC] AllocateMemoryUnit For ExMem1
63: 126.507 [RSC] AllocateMemoryUnit For ExMem1_2
64: 126.527 [RSC] AllocateMemoryUnit For OnlyMem1
65: 127.831 [RSC] MemMgr(IMAGE) 0 2
66: 127.862 [RSC] MemMgr(IMAGE) 0 0
67: 127.890 [RSC] MemMgr(IMAGE) 0 7
68: 127.911 [RSC] MemMgr(IMAGE) 0 0
69: 127.976 [RSC] PROP_MEMORY_STATUS(SELF) (0->)3 (OTHER) 3
70: 127.995 [RSC] Deliver PROP_MEMORY_STATUS 3
71: 128.534 [RSC] SRMExMem1_1State Event 0 Result State 0->6
72: 128.572 [RSC] hExMem1_2StateObject Through Event 0 State 0
73: 129.319 [RSC] SRMExMem1_1State Event 4 Result State 6->6
74: 129.357 [RSC] hExMem1_2StateObject Through Event 4 State 0
75: 130.151 [RSC] this->dwCardStatus[0] = 0x1(552)
76: 131.075 [RSC] this->dwCardStatus[1] = 0x0(552)
77: 131.850 [RSC] this->dwCardStatus[2] = 0x1(552)
78: 132.548 [RSC] PROP_PC_HDD_STATUS = 0x1
79: 133.498 [RSC] NO IMAGEFORMAT EstimatedSize.c 255
80: 133.535 [RSC] NO IMAGEFORMAT EstimatedSize.c 255
81: 133.575 [RSC] ERROR SetDevelopImageCondition DevelopCombination.c 107
82: 134.567 [RTC] !! RTC CHECK ERROR !!
83: 137.728 [PRP] Deliv WaitID = 0x8000003F, 0xFF02BE84(1)
84: 137.914 [PRP] MovieParamData
85: 138.012 [PRP] mode 0 size 0x0 , framerate 0x19 , type 0xc zoom 0x0
86: 138.597 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 128
87: 138.821 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 128
88: 139.022 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 128
89: 140.260 [JOB] InitializeJobClass (ID = 7165, Num = 17)
90: 140.573 [JOB] [BIND] dcsResultCBR (0x931af8)
91: 140.854 [JOB] PROP_CFN_TAB2 0 0
92: 141.197 [PRP] propRegisterSlave 0x8000003F
93: 141.491 [STARTUP] ERROR ASSERT : DevelopCombination.c, Task = RscMgr
94: 141.571 [STARTUP] ERROR ASSERT : Line 108
95: 141.616 [STARTUP] ERROR ASSERT : FALSE
96: 141.700 [STARTUP] ASSERT Time 1899/12/31 0:0:0
97: 144.666 [PRP] Complete WaitID = 0x8000003F, 0xFF02A10C(1)
98: 144.843 [STARTUP] startupErrorRequestChangeCBR (0x1d)
99: 144.961 [STARTUP] startupErrorRequestChangeCBR : ErrorSend (101, ABORT)
100: 145.388 [CERES] RegisterGPSInfoCallback
101: 146.081 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
102: 147.320 [JOB] InitializeInnerDevelopJobClass (ID = 7165, Num = 16)
103: 147.396 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 10 )
104: 161.531 [SND] Seq LPC 5-0
105: 161.578 [SND] HARB_ARBMODE Before:0x00000000 Current:0x00000000
106: 161.618 [SND] HARB_HARBCTRL Before:0x002AEAA8 Current:0x002AEAA8
107: 161.630 [SND] Seq LPC 5-1
108: 161.695 [SND] Seq LPC 5-2
109: 161.737 [SND] Seq LPC 5-3
110: 161.791 [SND] Seq LPC 5-4
111: 161.805 [SND] Seq LPC 5-5
112: 161.817 [SND] Seq LPC 5-6
113: 162.212 [SND] Seq LPC 5-7
114: 162.226 [SND] Seq LPC fin
115: 163.916 [SEQ] NotifyComplete (Cur = 3, 0xe0110, Flag = 0x40000)
116: 164.122 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 147
117: 164.346 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 147
118: 164.564 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 147
119: 164.794 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 147
120: 165.010 [EM] emRegisterMulticastCallback : EventID = 5, ClassID = 147
121: 165.215 [EM] emRegisterMulticastCallback : EventID = 6, ClassID = 147
122: 165.413 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 147
123: 165.615 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 147
124: 165.814 [EM] emRegisterMulticastCallback : EventID = 8, ClassID = 147
125: 166.021 [EM] emRegisterMulticastCallback : EventID = 9, ClassID = 147
126: 166.231 [EM] emRegisterMulticastCallback : EventID = 10, ClassID = 147
127: 166.442 [EM] emRegisterMulticastCallback : EventID = 17, ClassID = 147
128: 166.888 [SHTC] scsProperty ID=0x0(0x80)
129: 167.118 [SHTC] scsProperty ID=0x80040004(0x0)
130: 167.345 [SHTC] scsInit
131: 168.472 [ENG] [ENGIO](Addr:0x5c880000, Data:0x 30000)
132: 176.890 [SHTC] Mem1Component Size=0x37a54
133: 177.892 [SHTC] DarkcurAddress:0x5c9a5960, Size:131072
134: 178.843 [SEQ] NotifyComplete (Cur = 3, 0xa0110, Flag = 0x80000)
135: 179.711 [SHTB] sbsInit
136: 179.979 [SHTB] VShadingAddress:0x5c8c9960, Size:901120
137: 180.769 [SHTP] spsInit
138: 180.913 [FM] FM_RegisterSpaceNotifyCallback
139: 181.061 [MRK] RegisterSpaceNotifyCallback : DriveNo = 2
140: 181.101 [FM] voiRegisterSpaceNotifyCallback : DriveNo = 2
141: 181.162 [FM] RegisterSpaceNotifyCallback : DriveNo = 2
142: 181.202 [FC] FcmcRegisterSpaceNotifyCallback : DriveNo = 2
143: 181.258 [FM] FM_RegisterSpaceNotifyCallback
144: 181.609 [TERM] terminateChangeCBR : SHUTDOWN (255)
145: 181.635 [TERMINATE] SHUTDOWN init comp
146: 181.798 [TERM] terminateChangeCBR : AUTO_POWEROFF (1)
147: 181.835 [TERMINATE] Abort init comp
148: 182.141 [SEQ] NotifyComplete (Cur = 3, 0x20110, Flag = 0x100)
149: 182.288 [WFT] TOM_Initialize
150: 182.993 [WFT] PROP_WFT_IMAGE_TRANS (1)
151: 183.631 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 158
152: 183.869 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 158
153: 184.079 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 158
154: 186.986 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 167
155: 187.218 [EM] emRegisterMulticastCallback : EventID = 11, ClassID = 167
156: 187.260 [EM] Already SW1OFF
157: 187.402 [MC] cam event metering timer start
158: 187.614 [EM] emRegisterMulticastCallback : EventID = 7, ClassID = 167
159: 187.829 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 167
160: 188.042 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 167
161: 188.247 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 167
162: 188.459 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 167
163: 188.668 [EM] emRegisterMulticastCallback : EventID = 18, ClassID = 131
164: 188.873 [EM] emRegisterMulticastCallback : EventID = 19, ClassID = 131
Very much trust in him, that you can help me in the solution of the problem, or you can tell me what is the problem with the DSLR.
Thank you in advance for your help.