Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - bredy

#1
Are you sure have activated on the LCD the ML display?
#2
@a1ex nikfreak

I try to define the problem with Photo LiveView Mode.

The problem is only when in LiveView I set autofocus to 'Face detection + Tracking' and enable ML overlay graphic.
Then:
Active LV mode.
Set Global Draw to all mode and active on display with Info Button. You have to see the ML overlay graphic in LV.
Set Autofocus in LV to 'Face detection + Tracking'.
RAW or JPEG are same.

Now press ZoomIn button two time

The LV Button crash. The solution is remove the battery.

If I set the other Autofocus mode or MF I don't have problem.
If with same configuration I active Magic zoom with trigger mode set only to ZoomIn I don't have problem.
#3
@a1ex

The problem is in Photo mode with LV active, RAW or Jpeg is same don't change.

But in Video Mode I try and I have the same problem.

If I active the Magic Zoom in Overlay Menù I don't have the problem.
#4
@a1ex

The problem are in LV mode and Movie mode. The same only with Global Draw ON and active in screen. From display without information I press 4 time Info Button and I see the ML overlay graphics.

With Global Draw Off don't crash, because the dispaly don't have ML overlay graphics.

Where is the RAW/MLV submenu?
#5
The problem are with all card. Same problem.
Global draw are setting standard "Always On".

I press Info button to see the ML Overlay, because with canon overlay display I don't have problem.

With Magic zoom active No problem found.

I press zoom button two time because the first time I don't have problem, the second time I press the Zoom the LV button freeze.

Sorry, but I don't speak english well.
#6
The problem is not solved.

Canon 70D with all setting standard.
ML fresh installation.
Go in Live View
Press Info for view the ML overlay.
Then press AF Point Selection/Magic Zoom two time. First time no problem, from the second the live view button freeze.

Then try to exit from LV.

For me the only solution is to remove the battery.

In the post before i write problem solved because I don't set the ML overlay.
#7
@Walter Schulz I try your solution. Now I don't have problem never with Sd 45MB/s. Mistery
#8
I try with another card and I don't have the problem. Thanks

The first card is SanDisk Extreme 45MB/s with this I have problem
The second card is SanDisk Extreme Pro 95MB/s with this I don't have problem.

with everyone I start with default option of Canon 70D
#9
I have the B version. The problem are in LiveView and MovieMode. Only in viewfinder the zoomin button works normal.

Magic zoom: off
#10
I have the same problem with the old version. In live view if I press the zoom in button the camera freeze. Only solution is to remove the battery. If I turn off the camera the LV is on.

None have this problem? Thanks.
#11
Nikfreak

I have a problem with 111.B

With standard setting on my 70D I install the ML 70D.111B No change on setting.

I go in LiveView. Then press ZoomIn Button. The camera freeze. I try to press LiveView but doesn't work, I turn off the camera, the image turn off but the ML screen don't turn off. Only solution is to remove the battery.
#12
But in the last 70.111B dowloand I don't see the file of firmware. I have to use the old one? Thanks
#13
I use the standard setting of Canon 70D, magic zoom not active on ML. Every time I press this button I ave the same problem.

Here the crash log:
ASSERT: err == SUCCESS
at GUI.c:684, task PropMgr
lv:1 mode:3


Magic Lantern version : Nightly.2015Apr23.70D111B
Mercurial changeset   : 1ace8a558a3a+ (70D-merge) tip
Built on 2015-04-23 19:29:50 UTC by ml@ml-pc.
Free Memory  : 170K + 1565K

ASSERT: err == SUCCESS
at GUI.c:684, task MainCtrl
lv:1 mode:3


Magic Lantern version : Nightly.2015Apr23.70D111B
Mercurial changeset   : 1ace8a558a3a+ (70D-merge) tip
Built on 2015-04-23 19:29:50 UTC by ml@ml-pc.
Free Memory  : 170K + 1561K

ASSERT: err == SUCCESS
at GUI.c:684, task notifybox_task
lv:1 mode:3


Magic Lantern version : Nightly.2015Apr23.70D111B
Mercurial changeset   : 1ace8a558a3a+ (70D-merge) tip
Built on 2015-04-23 19:29:50 UTC by ml@ml-pc.
Free Memory  : 170K + 1556K

If Magic Zoom is active no problem if i press the zoomin button.
#14
rev. 70d-111B

Cropmarks--- Ok in Live View, but in menù ML the cropmarks image are not good.
#15
rev. 111B

In Live View if I press the Zoom In button the image on display freeze, I try to turn off the camera but the image don't close. The only solution is to pull out the battery.
#16
what means (keyword:UNAVI)?
#17
@OlRivrRat
I have the 70D-111B and the movie not restart after 29:59.
#18
Quote from: skanter on April 27, 2015, 10:44:02 PM
Just started using  version 111B, all going well so far.

First (probably obvious) question: how do you get ML menu to stay on without switching back to LV screen after a few seconds? I could not find a setting for this.

Thanks in advance...

I have the same question. If I am on Video Mode or LiveView, the ML Menù escape after 5 second.
#19
Rev. 111B

Is it nornal that in liveview when I press half shutter button or af-on button the canon date is upper the ML date screen?
#20
But the sn supported is 006871947635 or 068719476735?
#21
Archived porting threads / Re: Canon 70D
December 23, 2014, 02:29:50 PM
I have the 70D and I'm happy that someone work to it.