Messages

Anyone remember egen the firar version release I was thinking It most beer more or less. 10 years?

https://petapixel.com/2018/02/12/get-look-smooth-trans-focus-without-stf-lens/


Could the amateur be bracketed during exposure to achieve effect of smooth bookeh?

Gave the VM 2 cpu and now it works prefectly!

so 1 CPU wil fail >1 CPU works....

Compiled the software and it seems that it stucks on:

Code Select Expand

Line 572 in MainWindows.xaml.cs

  cde.Wait();   

Removed that line.
  // cde.Wait();


And now the software produce all frames .DNG and .WAV files even if I add more then one file. But the progress bar stucks on 95% or something like that but no problems to add more file after that

Understand! Anyone else got the same problem under VM?

it starts and converts. so the .net-framework is working properly. the debug shows an output into folder

Code Select Expand

C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8\M20-2108
but it does not output audio. there are some strange things i have to check in my source. please try with a sample file from here.

(if the progressbars dont move, seems like a problem with the vm's)
converting 250mb is a no-brainer, should be done in 4-5 seconds.
why should i? its a free software without special ambitions (indirect adware only working on native win-systems? )

regards chmee

Tyyed with all four MLV file in second post and same problem, nothing happens when i press convert.  Tryed Two diffrent machines parallells and and Vmware ESXi.
Same problem and no problem with a real Windows 7 machine.

Code Select Expand

------------- 1.5.0 BETA8 started at 14.08.26 11:17:11 --
[init][settings] -- ffmpeg Exists: false
[drop] started
[drop] Files dropped:
[drop] ------
[drop] C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8\5DIII_113_14apr13_blfixON.MLV
[drop] ------
[drop] -- file C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8\5DIII_113_14apr13_blfixON.MLV.
[drop] -- file C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8\5DIII_113_14apr13_blfixON.MLV will be analyzed now.
[drop] is MLV
[setFileinfoData] set/changed Filedata
[drop] FileinfoData set
[createMLVBlocklist] started
[createMLVBlocklist] splitFiles counted (1)
[createMLVBlocklist] indexing Blocks in C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8\5DIII_113_14apr13_blfixON.MLV
[getMLVAttrib] started
[getMLVAttrib] reading RAWI-Block
[getMLVAttrib] reading MLVI-Block
[getMLVAttrib] reading IDNT-Block
[getMLVAttrib] reading WBAL-Block
[getMLVAttrib] reading EXPO-Block
[getMLVAttrib] reading LENS-Block
[getMLVAttrib] reading WAVI-Block
[getMLVAttrib] [!] NO WAVI Block
***** [getMLVAttributes] metaData Object:
xResolution=1600
yResolution=900
frames=15
bitsperSample=14
bitsperSampleChanged=0
isLog=False
colorMatrix=System.Byte[]
lostFrames=0
fpsNom=23976
fpsDen=1000
dropFrame=False
fpsString=23,98
stripByteCount=2520000
stripByteCountReal=2520000
modell=Canon EOS 5D Mark III
camId=MAGIC6e4781b
apiVersion=0
splitCount=1
photoRAW=False
photoRAWe=False
RGGBValues=System.Int32[]
RGBfraction=System.Int32[]
jpgConvertR=0,540084388185654
jpgConvertG=1
jpgConvertB=0,547008547008547
whiteBalance=4500
whiteBalanceMode=0
whiteBalanceGM=3200
whiteBalanceBA=3200
blackLevelOld=2048
blackLevelNew=2048
whiteLevelOld=15000
whiteLevelNew=15000
maximize=True
maximizer=5,05991352686844
previewPic=
previewFrame=0
errorString=
isMLV=True
DNGHeader=
version=1.5.0 BETA8
versionString=System.Byte[]
propertiesString=
*****
***** [getMLVAttributes] fileData Object:
convertIt=False
fileName=C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8\5DIII_113_14apr13_blfixON.MLV
fileNameOnly=5DIII_113_14apr13_blfixON
fileNameShort=5DIII113
fileNameNum=51131413
tempPath=C:\Users\jonte\AppData\Local\Temp\
sourcePath=C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8
basePath=
destinationPath=
extraPathInfo=
_changedPath=
outputFilename=
creationTime=2014-08-26 11:02:18
modificationTime=2014-08-26 11:03:25
VIDFBlock=
RAWBlock=
*****
***** [getMLVAttributes] lensData Object:
lens=120-300mmI:
focalLength=235
aperture=280
isoValue=100
shutter=1/33s
*****
[drop] MLV Attributes and Blocklist created and sorted. Blocks: 47
[drop] VIDF-List created. Blocks: 15
[readVIDFBlockData] started
[drop] VIDF-Blockdata read and created.
[drop] adding 5DIII_113_14apr13_blfixON to batchList
[drop] ** Item 5DIII_113_14apr13_blfixON imported | MLV
[drop] * res 1600x900px | 23,98fps | 15 frames | BL2048 | WL15000
[drop] * modell Canon EOS 5D Mark III | vidfblocks 15 | has no audio
[doWork] started
[doWork] all in all there are 15 frames to convert
[doWork] 1 Cores used
[doWork] -> converting item 5DIII_113_14apr13_blfixON
[doWork] settings format 0 with BL2048 WL15000 with+out maximizingvalue 5,05983631871526
[doWork] prefix - filename generator [F]
[doWork] destinationPath -> 5DIII_113_14apr13_blfixON
[doWork] outputFilename  -> 5DIII_113_14apr13_blfixON
[doWork] Directory C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8\5DIII_113_14apr13_blfixON created
[doWork] took DNGtemplate and changed values
[doWork] * init frameCount for multithreaded Convert
[doWork][for] read/convert MLV VIDF: [0]


I got .net 4.5. Windows 7 all uppdates on Winodws.
Machine #1
Mac pro  mid 2010, 16RAM, nvidia quadra 4000. 10.9.4
Parallells Desktop 9 (updated)
Windows 7 (updated)

Machine #2
Asus P9D-I
Intel Xeon E3-1265Lv3 2,5GHz
16GB ECC RAM
ESXi 5.5 + Windows 7


The software starts correctly on boths machines but when I press convert nothings more happens. Waited >1h for a 250MB MLV-file.

Posted the debuginfo. Did you add some Anti-Virtual Machine and Anti-Sandbox in the software?
Do you need any special system requirements, cpu speed, cores, ram, hdd, GPU?

Code Select Expand

------------- 1.5.0 BETA8 started at 14.08.25 21:12:50 --
[init][settings] -- ffmpeg Exists: false
[drop] started
[drop] Files dropped:
[drop] ------
[drop] C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8\M20-2108.MLV
[drop] ------
[drop] -- file C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8\M20-2108.MLV.
[drop] -- file C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8\M20-2108.MLV will be analyzed now.
[drop] is MLV
[setFileinfoData] set/changed Filedata
[drop] FileinfoData set
[createMLVBlocklist] started
[createMLVBlocklist] splitFiles counted (1)
[createMLVBlocklist] indexing Blocks in C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8\M20-2108.MLV
[getMLVAttrib] started
[getMLVAttrib] reading RAWI-Block
[getMLVAttrib] reading MLVI-Block
[getMLVAttrib] reading IDNT-Block
[getMLVAttrib] reading WBAL-Block
[getMLVAttrib] reading EXPO-Block
[getMLVAttrib] reading LENS-Block
[getMLVAttrib] reading WAVI-Block
***** [getMLVAttributes] audioData Object:
hasAudio=True
audioFile=
audioSamplingRate=48000
audioBitsPerSample=16
audioFormat=1
audioChannels=2
audioBytesPerSecond=192000
audioBlockAlign=4
*****
***** [getMLVAttributes] metaData Object:
xResolution=1920
yResolution=804
frames=246
bitsperSample=14
bitsperSampleChanged=0
isLog=False
colorMatrix=System.Byte[]
lostFrames=0
fpsNom=25000
fpsDen=1000
dropFrame=False
fpsString=25,00
stripByteCount=2701440
stripByteCountReal=2701440
modell=Canon EOS 5D Mark III
camId=MAGIC737d375
apiVersion=0
splitCount=1
photoRAW=False
photoRAWe=False
RGGBValues=System.Int32[]
RGBfraction=System.Int32[]
jpgConvertR=0,540084388185654
jpgConvertG=1
jpgConvertB=0,547008547008547
whiteBalance=4500
whiteBalanceMode=0
whiteBalanceGM=4400
whiteBalanceBA=4400
blackLevelOld=2046
blackLevelNew=2046
whiteLevelOld=15000
whiteLevelNew=15000
maximize=True
maximizer=5,05913231434306
previewPic=
previewFrame=0
errorString=
isMLV=True
DNGHeader=
version=1.5.0 BETA8
versionString=System.Byte[]
propertiesString=
*****
***** [getMLVAttributes] fileData Object:
convertIt=False
fileName=C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8\M20-2108.MLV
fileNameOnly=M20-2108
fileNameShort=M202108F
fileNameNum=202108
tempPath=C:\Users\jonte\AppData\Local\Temp\
sourcePath=C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8
basePath=
destinationPath=
extraPathInfo=
_changedPath=
outputFilename=
creationTime=2014-08-25 21:12:40
modificationTime=2014-08-20 21:07:56
VIDFBlock=
RAWBlock=
*****
***** [getMLVAttributes] lensData Object:
lens=EF50mm f/1.4 USM:
focalLength=50
aperture=160
isoValue=1600
shutter=1/50s
*****
[drop] MLV Attributes and Blocklist created and sorted. Blocks: 648
[drop] hasAudio. AUDF-List created. Blocks: 50
[drop] VIDF-List created. Blocks: 244
[readVIDFBlockData] started
[readVIDFBlockData] done: [0][1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24]
[readVIDFBlockData] done: [25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49]
[readVIDFBlockData] done: [50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74]
[readVIDFBlockData] done: [75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99]
[readVIDFBlockData] done: [100][101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118][119][120][121][122][123][124]
[readVIDFBlockData] done: [125][126][127][128][129][130][131][132][133][134][135][136][137][138][139][140][141][142][143][144][145][146][147][148][149]
[readVIDFBlockData] done: [150][151][152][153][154][155][156][157][158][159][160][161][162][163][164][165][166][167][168][169][170][171][172][173][174]
[readVIDFBlockData] done: [175][176][177][178][179][180][181][182][183][184][185][186][187][188][189][190][191][192][193][194][195][196][197][198][199]
[readVIDFBlockData] done: [200][201][202][203][204][205][206][207][208][209][210][211][212][213][214][215][216][217][218][219][220][221][222][223][224]
[drop] VIDF-Blockdata read and created.
[drop] adding M20-2108 to batchList
[drop] ** Item M20-2108 imported | MLV
[drop] * res 1920x804px | 25,00fps | 244 frames | BL2046 | WL15000
[drop] * modell Canon EOS 5D Mark III | vidfblocks 244 | has audio
[doWork] started
[doWork] all in all there are 244 frames to convert
[doWork] 1 Cores used
[doWork] -> converting item M20-2108
[doWork] settings format 0 with BL2046 WL15000 with+out maximizingvalue 5,05905511811024
[doWork] prefix - filename generator [F]
[doWork] destinationPath -> M20-2108
[doWork] outputFilename  -> M20-2108
[doWork] Directory C:\Users\jonte\Downloads\raw2cdng.1.5.0.beta8\M20-2108 created
[doWork] took DNGtemplate and changed values
[doWork] * init frameCount for multithreaded Convert
[doWork][for] read/convert MLV VIDF: [0]
[doWork][for] read/convert MLV VIDF: [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25]
[doWork][for] read/convert MLV VIDF: [26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50]
[doWork][for] read/convert MLV VIDF: [51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75]
[doWork][for] read/convert MLV VIDF: [76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100]
[doWork][for] read/convert MLV VIDF: [101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118][119][120][121][122][123][124][125]
[doWork][for] read/convert MLV VIDF: [126][127][128][129][130][131][132][133][134][135][136][137][138][139][140][141][142][143][144][145][146][147][148][149][150]
[doWork][for] read/convert MLV VIDF: [151][152][153][154][155][156][157][158][159][160][161][162][163][164][165][166][167][168][169][170][171][172][173][174][175]
[doWork][for] read/convert MLV VIDF: [176][177][178][179][180][181][182][183][184][185][186][187][188][189][190][191][192][193][194][195][196][197][198][199][200]
[doWork][for] read/convert MLV VIDF: [201][202][203][204][205][206][207][208][209][210][211][212][213][214][215][216][217][218][219][220][221][222][223][224][225]


I have problems to run the 1.50 beta8 and older versions under a virtual machine (Windows7) tested on Parallels and VMvare ESXI two different machines and same problem. I can add a file and press convert but I don't se any progress bar or anything else.


Doesn't the software work under VM?

See above explanation

But the menu  file-> source, hide console, clear console. Edit -> cut,copy, paste, clear, increase font sieze, decrease font size, start dictation, special charaters. Doesn't make any sense to me.  I din't try the linux and mac version.

For just playing files it's fine  but batch processing is a pain.
http://tv.adobe.com/watch/digital-video/batch-encoding-with-adobe-media-encoder/

also check raw2cdng for a much better workflow.

Sure, but why not just regular menus now you need to know what the icons menas and the shortcut to use the software.

On mac the user interface is very different from regular programs. Why no meny system?  Just only shortcuts and icons?

I want a user interface more like Adobe media encoder or something like that add files and have a preset and batch


Or is this only me?

doesnt work, just sound dev open errors

* Setup -> Set TC input soruce [Restart]


Don't have any camera ATM....

Maybe this is can take audio input from same company:

http://www.videotoolshed.com/product/8/ltc-reader

or:

http://ltcsmpte.sourceforge.net/

http://www.musicsensorsemotion.com/2010/09/21/smpte-matlab-decoder/

http://ardour.org/

What is the shutter bug?

how to use the file fixer on osx with mono?
installed mono and then:
mono /Users/scrax/Desktop/EOSMovieFixer.exe
opened an icon like for a new program but no window

My was very slow on a 6 core macbook pro when I opened file dialog it was to slow. With my home computer with amd turion x2 with with windows 7 it was much faster. Try to wait

i would really stop here. we have a movie fixer and now just have to enable the firmware to record >4GiB.
we should save our resources for other things now.

Second that




What about seamless recording with fat32 only camera?

I think there is two kind of patches that would be possible:

1. Patch the record function, so when you press rec the camera start with a new 64-bit .mov file from the beginning.

2. Make a new function in ML, that can patch 32-bit clips after you have recorded then like EOSMovieFixer.exe


I think 1% talks about 2 and you about 1 or?

Good work, I. Don't have the 600d so can't try. How did you solve the patching?

[it now handles 64-bit QuickTime files properly and can also extend 32-bit files to 64-bit if they grow above the limit because of the hidden container.]

Did some search on google and found this perl script, maybe it could help for patching the file?

Update (2012-02-18): Vladimir Ivanov has contributed an updated version of the script – it now handles 64-bit QuickTime files properly and can also extend 32-bit files to 64-bit if they grow above the limit because of the hidden container. There's also a new option to temporarily modify the hybrid file in a way that makes it possible to change the TrueCrypt password of the encrypted volume.

http://keyj.emphy.de/files/tcsteg2.py
http://keyj.emphy.de/real-steganography-with-truecrypt/

If you are on OSX and registered as a developer (it's free) there is a tool called Atom Inspector.

https://developer.apple.com/downloads/index.action?q=quicktime

Atom Inspector is a tool for viewing and editing atom resources in QuickTime movie and MP4 files. It provides functionality such as incremental atom search, atom specific data views and hexadecimal display mode. Atom Inspector requires a Mac running Mac OS X 10.5.7 or later.

Maybe exiftool?
http://www.sno.phy.queensu.ca/~phil/exiftool/TagNames/QuickTime.html#SampleTable
http://www.sno.phy.queensu.ca/~phil/exiftool/

Could this have something to do with the 4GB quicktime limit?

The co64 atom for a track lists the offsets for the various chunks that comprise a media track. These offsets are absolute offsets within the file starting from offset 0. Note that this atom allows for 64-bit offsets which is necessary for QuickTime files exceeding 4 gigabytes. Smaller files can save space in this table by using the stco atom which only allows for 32-bit offsets.

http://wiki.multimedia.cx/index.php?title=QuickTime_container#co64

and
https://developer.apple.com/quicktime/icefloe/dispatch022.html

Can someone upload a video file >4gb with the error?

Offtopic,  but why did tramell and aj quit?