Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jtvision

Pages: [1] 2 3
1
General Chat / Re: Guessing 1st April for 2019 - Share your thoughts
« on: April 10, 2019, 05:35:50 PM »
I would like to donate thru paypal to express my gratitude to ML project and team for everything they've done for us. How can I do that?

2
Camera-specific discussion / Re: Canon 80D
« on: August 30, 2016, 10:26:18 PM »
I am on this forum everyday. Because I am very curious of what developments are happening here. And developments are happening!
"if your cam is not supported by ML you should act like there will be no ML for your cam ever" is simply not true!

3
Camera-specific discussion / Re: Canon 80D
« on: August 30, 2016, 09:59:29 PM »
ML has no "delivery date". Nobody is able to say how long it will take and if your cam is not supported by ML you should act like there will be no ML for your cam ever.
Top of page -> User Guide -> FAQ -> Troll Questions section
Same for features ...

I have seen this quote several times in this forum. How many of your 4866 posts are copy paste of these, Walter Schulz? 

4
Camera-specific discussion / Re: Canon 5D Mark IV
« on: August 14, 2016, 05:42:02 PM »
Regardless of specs I'm assuning image quality from 4k sensor will be significantly better. I remember not being able to tell the difference between 4k and 1080p footage shot on BMPC, because 1080p shot on 4k sensor is really good.

5
Share Your Videos / Re: Dubai Hyperlapse
« on: June 24, 2016, 11:11:54 PM »

6
Share Your Videos / Re: Dubai Hyperlapse
« on: June 24, 2016, 08:01:36 PM »
Simply stunning and yet so vivid. It was definitely electrifying to watch! By any chance could you share the FRSP's settings used within ML?

Thanks, D.E.J! I always use FRSP's default settings (i.e. Silent Mode: Full-Res, Slit-Scan Mode: Top -> Bottom, File Format: DNG. Intervalometer frequency usually is set to 1-2 seconds longer than shutter speed.

7
Share Your Videos / Dubai Hyperlapse
« on: June 24, 2016, 06:18:32 PM »
[https://youtu.be/lY9jUz5iM7s]

My Timelapse and Hyperlapse videos made using ML Intervalometer and FRSP on Canon 600D and 5D Mark III.

8
General Help Q&A / Re: Convert Raw to MLV possible
« on: April 19, 2016, 11:21:55 PM »
It feels like everyone enjoys technical process of making videos and not actual storytelling thru means of moving pictures . You geeks are funny folks! Why would anyone keep acquisition format! Wouldn't it be convenient to keep your work as video?  Even if you think you might re-grade your work differently in future, would you not keep them in dng or prores/dnxhd log?

9
General Chat / Re: Can't afford faster lenses for 600D
« on: March 22, 2016, 04:32:03 AM »
It feels all you need is couple of lights.

10
Raw Video / Re: Uncompressed 14-bit RAW video testing - 5D Mark III
« on: March 14, 2016, 04:54:51 AM »
Hmm, so is there any consensus on what is causing this issue and how we can avoid it? For me it is almost a deal breaker with currently almost every third take having corrupt frames.
Change to 1280x720 @50 fps from canon menu. You are getting corrupt frames because you're overwriting from 30fps to 50fps. When shooting raw you will still get 1080p even though your settings are at 720p as per canon menu.

11
General Chat / Re: Apertus Axiom Beta
« on: March 05, 2016, 02:44:40 PM »
Yes they were shot outside prefered range, after about an hour of continuous shooting.
Thanks for the hint I'll try that. Any noise correction tool you would recommend?

12
General Chat / Re: Apertus Axiom Beta
« on: March 05, 2016, 12:57:10 PM »
Cool, Alex! Thank you for taking time to look at bmpc 4k dngs. No worries and no pressure! Take your time. Its just comments of others made me think that I was missing something. 

FYI: Black magic cameras have preferred temperatures to work. FPN appears only if camera is not warmed up enough or if it got too hot after long hours of being on.

13
General Chat / Re: Apertus Axiom Beta
« on: March 05, 2016, 08:50:42 AM »
This was tweeted asking if anyone interested to have a tool to fix FPNs. And now being ignored.  :-[

14
General Chat / Re: Apertus Axiom Beta
« on: March 04, 2016, 02:49:19 PM »
Sorry, don't know what you mean. I dont see any tools for correcting bmpc4k dngs on that page. Or am I missing smth?

15
General Chat / Re: Apertus Axiom Beta
« on: March 04, 2016, 01:38:58 PM »
Hi Alex,

Did you have any chance to look at my 4k BMPC dngs?

thanks,

16
Hardware and Accessories / Re: Beholder gimbal test / raw
« on: February 26, 2016, 01:44:22 PM »
Why?
Why?

Yes, Why? Watching your videos I was almost convinced that I should sell my Glidecam HD-2000 and get Beholder DS1.

17
General Chat / Re: Apertus Axiom Beta
« on: February 20, 2016, 06:38:00 PM »
Yes, last one on that page. I posted noisy Blackmagic 4k dngs hoping for a fix.

18
General Chat / Re: Apertus Axiom Beta
« on: February 18, 2016, 07:00:14 PM »
Hi Alex,
Were you  able to look at FPN on blackmagic 4k files I submitted over a month ago on this post?

19
Raw Video / Re: Canon 5D - How to record in 30 fps using raw video?
« on: February 18, 2016, 06:48:45 PM »
You can never get continuous 30 fps with any card or setting.  I use 1.1.3 Raw 1.0 with fastest x1066 lexar card, max 40 seconds I get 30 fps.

20
599$?. Too expensive. I can get Blackmagic Video Assist for lower price. This records 1080p@60fps.

21
Share Your Videos / Re: Everyday Berlin // ML RAW
« on: January 11, 2016, 07:05:47 PM »
Love the transitions, especially the ones zooming in. Which effect do you use for that, Alex?

22
General Chat / Re: Apertus Axiom Beta
« on: January 07, 2016, 11:15:08 PM »
Anyone interested in a FPN correction tool for any other camera? (be it Canon, BlackMagic or whatever else, as long as dcraw opens its raw files)

Yes, please! Here's the link to the noisy .dng files from Blackmagic Production Camera 4K. Thank you!

https://drive.google.com/folderview?id=0B2KgeL11wjTZZlNTTDRYQjJTdnM&usp=sharing

23
General Chat / Re: 5D2 Raw or BMCC
« on: September 14, 2015, 09:33:08 PM »
Don't think twice, BMCC is far better option. Video quality is stunning. 5D Mark II was good, but we are not in 2008 anymore. Just compare the footage and you wont need anyone's opinion.

24
Stunning! Unbelievably Good!

25
General Chat / Re: my 1st Feature film poster Magic Lantern raw
« on: May 15, 2015, 05:49:53 PM »
Poster looks exciting! Looking forward to see your trailer.

Pages: [1] 2 3