Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - vprocessing

#1
Tragic Lantern / Re: Tragic Lantern for EOS M
January 03, 2014, 02:06:27 PM
Happy new year to all !!!
Wish you all the best for you and your picturessssssss ! 8)
Can we expect an audio monitoring with EOSM for 2014 ? ;)
#2
Post-processing Workflow / RAW Grading
January 01, 2014, 04:37:15 PM
Hi to all !
I wish you all a happy new 2014 !

I come with a few questions :
- I didn't found if calling the ACR window was possible in Adobe Premiere Pro CC...why in AE not in Premiere ???????
The only option seems the use of LUT.
- Would it be possible to translate an .XMP file of ACR in .cube or any LUT file ?
Da Vinci Resolve is an awesome tool... but i prefer ACR and find faster (only in termes of grading...not workflow) to have a great image than any other tool...
- ACR will be supporting a video monitoring ? or even an computered (DVI, Display port...) one ? Full screen without datas ?
#3
Tragic Lantern / Re: Tragic Lantern for EOS M
October 19, 2013, 02:19:25 PM
Oups ! I miss something about audio .....?  ???!
A for forbidden subject !?
#4
Tragic Lantern / Re: Tragic Lantern for EOS M
October 19, 2013, 11:55:17 AM
Quote from: funkysound on October 18, 2013, 04:42:22 PM
Hi vprocessing - how do you manage to keep the monitoring on the cam with the cable pluged in?
@ funkysound : For me to keep LiveView when SD output is set :
Set Audio menu to OFF then set it to ON. it should say "headphone disconnected".
Then plug the Canon SD video OUT and the LiveView will say and "Headphone connected" should appear.
I'm using an OLD  Philips 720 LCD TV
For me Audio DOES NOT go out ! In Any way :
NO Audio Output during standby Canon's way (so with LV disable on camera)
NO Audio Output during REC Canon's way
NO Audio Output during standby with ML headphones and LV on M
NO Audio Output during REC with ML headphones and LV on M
AUDIO Out on playback on TV Canon's way
AUDIO Out on playback on M with ML headphones activated and Canon SD AV cable plugged. So Video also plays on the LV.

Anyone has his audio OUT ?
For me it would be the nicest function on a M ! That's the main reason I've entered the ML ocean, hmmmm galaxy I shound even say !  :P
I'm very happy to have discovered all the other stuff I can so with it !  but FOR ME AUDIO and FOCUS PEAKING would be my two's If I had to choose !
#5
Tragic Lantern / Re: 50D and 40D Raw video
October 18, 2013, 09:26:08 AM
Hi to all !
I had one time my 50D block after a skipped frame... 25fps 400 iso 1/50 Manual Olympus lens with adapter 1584/892.
So I decided to benchmark my 1000x UDMA7 Komputerbay.
The buffer benchmark gave me results around 40mb/sec.
I've resent it for exchange and now I'm around 30mb/sec.........but it works.
Can someone explain the speed thing 'cause I don't understand how can it works @ 40 or even @ 30...

@ what step the dev of the 40D is ?
THX
.V
#6
Tragic Lantern / Re: Tragic Lantern for EOS M
October 18, 2013, 09:19:21 AM
Hi to all !
I've received my analog video out cable...
I've managed to plug it keeping the video monitoring on the camera but the sounds seems not to go out... ?
Did I missed something ? Is the function working ?
I'm on [EOSM]FullbackADTGui
Now the intervalometer seems to work for me !
I don't have so much time to spend those times on magic lantern but the 2 lasts times I used my "M" I got the "warming or out of memory" canon warning that causes the stop of the recording...Last time was good !
It seems that without module unload and video hacks off it is better ... I'm not sure it is really the cause.
As I'm on a 95mb UHS I Sandisk where do you think it is coming from ?
THX !
.V
#7
Tragic Lantern / Re: Raw video on 50d and 40d
September 18, 2013, 01:10:33 AM
Hexfiend (I'm on Mac) has a "text encoding" menu where you can choose ASCII(strict7bit).
It works !!!! 1% you're so great !!!!!
Indeed it works partially but it is my fault... I think I miss something...when you say change frame count it is about duration of the .RAW...?
The converted wrong file (4,29GB)  has given the same duration (number of dngs) as the .RAW (1,64GB) that I've taken header from i.e. only 768 dngs from 4,29GB .RAW...
How can I get frame count easely??
My reference file is 1,64GB .RAW file = 768*2,4Mb = 1,87GB DNG folder... ?? my dngs are 1468/824 pix = 2,4Mb
Anyway... I made 4,29/2,4=1865,...
When I tried to have 1865 in hexfiend with 0749...it gave me a 4 785 920 frames in RAWmagic !!!!!!!!! I stopped it when I see strange pics and so I got my 4,91 GB folder with 2012 dngs from 4,29GB.RAW...

I found statman.info that can help for conversion with the same logic as Shield...but not totally...
hexfiend seems NOT to have same logic as Shield for ex
Shield : 9e 08 = 2206 frames  /// Hexfiend 9E08 = -25080 /// Stateman.info 2206 = 89e
Shield : 80 04 =1152 frames  /// Hexfiend 8004 = -32764 /// Stateman.info 1152 = 480

Anyway...NOW you all know I'm a looser/piece of... with math... :o... BUT I HAVE MY FILE !!!!!  8)
But I'm sure this can help others so I took the right to write...
AND AGAIN 1% ! WITH YOUR HELP AND KNOWLEDGE IT WORKED FOR ME !!!! Please send me a poster of you !
#8
Tragic Lantern / Re: Raw video on 50d and 40d
September 17, 2013, 09:39:49 PM
Hi to all !

I'm discovering RAW with the 50D...AND It is Awesome !!!!!!!!! Never seen something nicer out of a cam...

I had on my 2nd time test shooting 2 problems with the "This ain't a lv_rec RAW file"
First was with a splitted file so I joined them with terminal and it was OK for use with RawMagic
The second is a clip who had "skipped frame"...the 50D just got blocked on the skippinng frame I had to pull out battery.
Then I have a 4,29 .RAW file and a 807ko .R00 file...
I've tried to change the footer with the 4GB one like before on this thread launched by "Shield"...
I just pasted it at the end of the file with Hexfiend...so the file was recognized by RawMagic but it is all purple crazyness !!!!
Am I doing the procedure bad ?
To finish, As I had this skipped frame I wanted to benchmark my Komputerbay x1000 UDMA7 64Go...the 5min benchmark never ends...
The buffer card bench give me results about 43,7MB/s, 40,1MB/s,44,1MB/s, 46,1MB/s (for this value buffer=19371k)
Should I send it back for exchange ?

For all those asking about graphic cards visit netkas.org, also on same subject Blackmagic official support often answer...
#9
Hi to all !

I'm discovering RAW with the 50D...AND It is Awesome !!!!!!!!!
I had on my 2nd time test shooting 2 problems with the "This ain't a lv_rec RAW file"
First was with a splitted file so I joined them with terminal and it was OK for use with RawMagic
The second is a clip who had "skipped frame"...the 50D just got blocked on the skippinng frame I had to pull out battery.
Then I have a 4,29 .RAW file and a 807ko .R00 file...
I've tried to change the footer with the 4GB one like before on this thread...
I just pasted it at the end of the file with Hexfiend...so the file was recognized by RawMagic but it is all purple crazyness !!!!
Am I doing the procedure bad ?
To finish, As I had this skipped frame I wanted to benchmark my Komputerbay x1000 UDMA7 64Go...the 5min benchmark never ends...
The buffer card bench give me results about 43,7MB/s, 40,1MB/s,44,1MB/s, 46,1MB/s (for this value buffer=19371k)
Should I send it back for exchange ?
#10
Tragic Lantern / Re: Tragic Lantern for EOS M
September 16, 2013, 08:59:57 PM
Quote from: Malakai on September 16, 2013, 11:27:32 AM
What class is your card? I recommend a minimum of class 10 when using ML and recording video to minimise problems while recording. From experience, anything lower and you may get stopped video every now and then, not good when you are trying to capture something.
It's Sandisk Class 10 UHS 1 95MB/Sec that I bought for RAW...
By the way before I got this fast card I tried with
TRANSCEND 16Go Class 10 : no continous shooting in RAW
SANDISK Extreme Class Pro 10 UHS 1 45Mb/s : no continous shooting in RAW
SANDISK Extreme HD Video Class 10  30Mb/s : Seemed OK for RAW when I was testing
All this seems a little weird...

I did think it was a speed issue as it couldn't be heat...
I was in 1x bitrate...

I don"t have the cable but audio monitoring is enabled ?

I had a daughter she's a little Nina ! ::)
#11
Tragic Lantern / Re: Tragic Lantern for EOS M
September 16, 2013, 10:11:38 AM
As I have a new born child...I'm watching time to time what's new ! but it is going quite fast...and ML needs a bit of time so I'm not Up up uptodate some times...
So we would have the audio monitoring ?  :) ??
Very good Idea to make a EOSM for noobs AND Advanced ! If I can help in writing (procedure or video fundamentals...not writing prog... :P) or testing or file hosting (via my dropbox) I'll be glad !
I've put this morning :
[EOSM]FullbackADTGui[EOSM]
Is it the last one ?
By the way I had a little bug on .mov shooting :
On the upper tight side I had a little icon (like a thermometer) with 3 or 4 square appearing and then a message with "your video has been stopped"or something like that...
In a canon graphical style I think more than a ML style menu...
I had one time or two this message with the previous ML I had...This morning I think I had it 4 times...the first reboot didn't solve...
With a few reboot it stops...
Did some you had this ? What is the cause ?
I'll try to take a pic of the thing...
AGAIN Thanks for what you all do !
I must go to work...so next time for more !
#12
Tragic Lantern / Re: Tragic Lantern for EOS M
August 29, 2013, 09:04:06 AM
I've posted a few days ago on page 44 reply 1075 of this thread...
I think I was so excited to have my M MagicLanternized ! that I forgot to set my brain to on !!! :P
So as I'm not used to touchscreen for serious gear... I didn't think ML was now a touch app !
So I've found most of my request with the touch menus !

If I understand well the squeeze is due to line skipping ?

I've found discounted Sandisk SDHC UHSI 95mb/s so I've bought one and RAW video seems to be stable.
I'm going to seaside to visit family, I'm gonna try longer recordings but from now 1 to 2 min shot are writing well.

PinkDotremoval seems to work like a charm ! How guys did that ? Are the dots in the metadata...can't understand how you achieve this process but it seems to work and to be without artefacts or approximation...

For me intervallometer still don't work : black screen, or Liveview working but with no response . When I set to Off, black screen with blinking LED, when then put on On it usually make a shutter sound but stuck on LiveView...So pull battery to unlock M...

Menu button change the apparence of the ML menu.

MY bigger QUESTION ??? :o  or REQUEST ?  8)
Will live audio monitoring will be available like on the mark II ?
The AV cable AVC-DC400ST (that is sold separatly...from 5 to 20$) would be required but for me, this function would be SOOOOOO NICE !
Is it possible ? Will you work on it ?

The crop mode is 3x on the M ?
Same crop factor on the 50D ?

I'm still booting each time for ML but didn't try to change for now

AGAIN MANY THANKS !
.V
#13
Tragic Lantern / Re: Tragic Lantern for EOS M
August 18, 2013, 05:39:34 PM
Hi to all !

One more THANKS for you guys creating such usefull tools !
You just impress me ! 8)
With Vitaly (personalview) and Rominator and other guys from netkas, you really help people to make nice videos, all over the world, as pro or as hobby ! Bunch of digital revoltionnaries ;) you are !!!
You also push us to spend some extra time with computers...but that is for a good reason so... ;)

First are you aware if a speed booster will be made for EOS M ?
http://www.canonwatch.com/is-metabones-working-on-a-speedbooster-for-eos-m/
Or lens turbo from China ?

Then the serious Magic Lantern Part :
I have those resolution available:
1344x406 Non crop
1344x672 Crop
It seems that people are usually talking of other sizes...Am I wrong

The Squeeze ?
I don't understand why the pics are squeezed...as we are working with square pixels...

The Framerate ?
People are talking about 24p RAW vids...I have 30fps...Can I have 24 or more usefull for me 25 ?

Quality seems bad when I shoot RAW do I missed something ?

Duration of display of ML menu can I set it longer somehow ? It desappears very fast...when you are on your first days of ML it is a bit short...

Audio off !!!!! Will you be working on a version with audio on and audio output like with the 5DMkII...Even if it is with Canon flat  video settings...

Intervallometer doesn"t work or can cause failing of the camera...black screen and Led flashing red or green, shutter clicks sometimes...

Sometimes ML menu are little Icons...sometimes it is pages...when I have Icones I don't have the 2 last menus (module loading and the previous one...)

The boot :
I have to make firmware update each time I turn on the cam to have ML...
Can it load directly ?
I'm ok with that because it is a good way to make ML or non-ML EOS-M with the same card...

I've been using 3 different cards :
- 1 SANDISK EXTREME HD video Class 10 30MB/S SDHC I
This one seems the best of the 3. I can have RAW recording working.

- 1 SANDISK EXTREME PRO SDHC I
45MB/S with a little 1 but it's not the same icon than the other's class 10...with the 10 circled...it is more like a U around the 1
With this one RAW recording stops after 2 or 3 sec....If it is a class 1 I understand the problem...

- TRANSCEND SDHC Class 10
RAW recording stops also like with the 45MB/S

I'm on a 2.0.2 firmware.

THX for help !

.V