Messages

So, here are the steps that I took, a slight modification along with correct links on Canon eos m instructions.

1. First soft format your SD card on your computer.
2. Then format the card on your EOS M. This will create the 'DCIM' and 'MISC' folders on the SD card.
3. Next download files from the bitbucket.org link (https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/downloads/%5BEOSM202%5D%20FirstVersion-NoInstaller.zip) provided by 1% above on to your harddisk. Unzip the files and copy directly to your SD card.
4. Next copy the updaterM202.fir (link on page 33 of this thread) UpDaterM.fir (http://www.qfpost.com/file/d?g=NzBmhwaBK) on your SD card.
5. Open the EOSCard link from the installation section of the 5DMarkIII home page.
6. With the SD card in the card reader open the EOSCard utility.
7. Once in the EOSCard interface checkmark the 'EOS_Develop' and Bootdisk and press the big 'ML' icon and then press the 'save' icon on the top left of the EOSCard interface.
8. Then copy the ML directory from the Alpha 1 (http://bit.ly/UP7Avg) version (you can find this on the EOS M home page). Unzip and copy the 'ML' folder on the SD card. Then transfer the 'Modules' files that you got from the bitbucket.
9. Make sure not to use the autoexe.bin file from Alpha 1 but autoexe.bin file you got the bitbucket.org link. (step 3)


Ive been using ML with 1.0.6 for a while. Im now trying to install the 2.0.2 version. Stupid question: Do I need to update the camera with canons 2.0.2 firmware prior to this, or is the formware upgrade "included" in any of the above files?

Ive followed the above guide, but I haven't upgraded the camera with canons 2.0.2. firmware, and all I get is a black screen and a blinking green diod after the update-screen.

Henrik

Installed the 2.0.2 update. ML works, but I have to re-flash it everytime I restart my camera. Is there any way to get around this?
I don't understand this whole bootflag thing. I thought that if I already had ML on 1.0.6 I wouldnt get this problem!?

If someone could explain it in an easy way I would be very greatful!

So, here are the steps that I took, a slight modification along with correct links on Canon eos m instructions.

1. First soft format your SD card on your computer.
2. Then format the card on your EOS M. This will create the 'DCIM' and 'MISC' folders on the SD card.
3. Next download files from the bitbucket.org link (https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/downloads/%5BEOSM202%5D%20FirstVersion-NoInstaller.zip) provided by 1% above on to your harddisk. Unzip the files and copy directly to your SD card.
4. Next copy the updaterM202.fir (link on page 33 of this thread) UpDaterM.fir (http://www.qfpost.com/file/d?g=NzBmhwaBK) on your SD card.
5. Open the EOSCard link from the installation section of the 5DMarkIII home page.
6. With the SD card in the card reader open the EOSCard utility.
7. Once in the EOSCard interface checkmark the 'EOS_Develop' and Bootdisk and press the big 'ML' icon and then press the 'save' icon on the top left of the EOSCard interface.
8. Then copy the ML directory from the Alpha 1 (http://bit.ly/UP7Avg) version (you can find this on the EOS M home page). Unzip and copy the 'ML' folder on the SD card. Then transfer the 'Modules' files that you got from the bitbucket.
9. Make sure not to use the autoexe.bin file from Alpha 1 but autoexe.bin file you got the bitbucket.org link. (step 3)


Ive been using ML with 1.0.6 for a while. Im now trying to install the 2.0.2 version. Stupid question: Do I need to update the camera with canons 2.0.2 firmware prior to this, or is the formware upgrade "included" in any of the above files?

Ive followed the above guide, but I haven't upgraded the camera with canons 2.0.2. firmware, and all I get is a black screen and a blinking green diod after the update-screen.

Henrik

Where exactly is the "newer version"? Are you talking about the EOS-M?

Yes, Eos M. Newer than the one in the first post. If you go back to page 21 in this thread you'll find a link in post #507.

Found the link to the newer versions in post #507. Awesome!

Thanks man!

HDR video option is there in the movie menu.

I've got the following in the movie menu:
Bit Rate (CBR)
Time indicator
Movie logging
Movie restart
Stop recording
REC/STBY key
Shutter lock
Image effects...
FPS override
FPS ramping

You'll see there is no stable release for the EOS-M. The latest Canon firmware 2.0.2 is installed with all new EOS-M sold so there's no Alpha build for it at the moment. I really like the HDR video feature as well as intervelometer function on my Canon 60D. I'm waiting with baited breath for the ML for the EOS-M

I've got the old firware with the alpha build installed already. Sorry for being fuzzy.
I've found videos on Youtube ( http://www.youtube.com/watch?v=eDibGy8AVww ) showing HDR video footage shot with the Eos M, but I cant find anything about it in the ML menus, even though I've spent hours just trying out the different settings.
There are several youtube tutorials for how to shoot HDR video with ML, but none of them are for Eos M, and all of the others seem to have a "HDR video"-option under the movie tab in ML.

Hello everyone!

I bought an Eos M about a month ago, upgrading from a 450D, mainly for the video feature. I found out about ML, and have been reading here pretty much daily ever since. Thank you for a great job!

I've done my homework, and I would say I understand most of the features provided by ML, with a few exceptions. And thats what Im about to ask about!

Ive searched the forum and the rest of the internet for how to capture HDR-video with the Eos M, without any result. Or am I just stupid?!
If someone could reveal this well hidden secret, I would be a very happy man.

Thanks in advance, and again, good job!

Henrik
Sweden