Messages

2 questions...

Why 6D RAW video files are in full color? Even if I film in CineStyle, they still come in full colors.

How do I import raw files in Premiere? Can't find cineformDNG plug-in anywhere. I have windows 7.

It says EOS M

Grrrr. Yeah. Honest mistake. Sorry.

I downloaded the proper 113 update. Thanks.

Ok. I downloaded the lastest update ([EOSM] Raw Recording.zip), unziped, copy and replace autoexect bin, modules and scripts. I put the sd card (sandisk 95 ext pro) back on my 6D but the camera wont starts. No red light indicating an sd card. I tried another sd card (without ML) and the camera boots. Still wont work with sandisk 95.

I had to restore previous ML version on my sandisk card to make the camera boots.

Must have done something wrong?

I'm looking at 1% bitbucket download. Can't find lastest updated 6D ML files. I would like to update ML on my camera.

Well I have the sankdisk 95 card (can write up to 90 mpbs). I guess its useless with the 6D, right?

NoisyBoy, I was wondering if you will add the proper settings in your guide for Encorder (Bit Rate, InitPQ, flush rate, gop size, etc) during normal shooting. Also, how do we setup ALL-IN and IPB mode in ML.

Thanks.

1%, when is all set and done, what do you think will be the recording time without interruptions for Raw? Like on a 32gb card? 15 minutes, 25 mins?

Come to think about it, it's possible that I uninstalled ML improperly before upgrading to 1.1.3. I think I formatted the card but I didn't press Q to format card + remove ML. Might be why I was able to boot lag ML on 1.1.3?

Oddly enough, I installed the boot lag on 113. I had ML on 112 previously. So I uninstalled ML before upgrading the firmware to 113. Then boot lag the sd on 113, format card, put lastest 6d ML bin, and it worked. Beside the camera freezing/jamming at random when recording videos, there's was no other problems.

I now uninstalled ML and the camera seems to be fine. I'll downgrading to 112 when battery is fully charged.

Crap. I installed ML on the 1.1.3 firmware. The camera doesn't seem to have any issues. So I just have to uninstalled ML, downgrade to 1.1.2 firmware and re-install ML, right?

It seems that I have been able to record RAW on 1280x720 (30MB/s??) until the 4GB record limit, with no skipped frame. The RAW file is recorded into one single frame (M0000000.RAW). I can't open the file on Resolve, AE or Adobe premiere.

And I don't know how to record in DNG Raw files? Might need some help with the settings.

Ok. Nice. It worked. The only thing is I have a blue sky like bar at the bottom of the screen that wont go away. Something called kel? And I can't record more then 4 seconds in normal mode.

Now, how do I record RAW? I put up ML, then LV, and record?

I get a tcc: error: underfined symbol (all the raw stuff: raw_force_aspect_ratio, raw_info. etc) with [E] failed to link modules.


Yeah, I press info but noting comes up.

I updated the camera. Just a few problems. One, display infos (iso, aperture, grid, picstyle) doesnt come up in normal mode. I have to use ML to see them.

Second, I have RAW files missing when I tried to loads the modules (raw_lv_disable. raw_set_geometry)

Once you have the bootflag set on 112 and you're using ML you can just put 113 file on the card and upgrade. Then when its done turn off the camera and get the latest 113 bin to make ML work again.

Ok. Sorry to bother you again but...

1) Which 113/113 bin files precisely? I look at bitbucket and theres like 50 files on it.

2) Where do I put the RAW files on the card? Root?  On Modules? Or ML?

Ok. I'm kinda lost to how to update to 113.

I currently have the developer firmware (1.1.2) and ML firmware (6D-112.fir) installed. To upgrade to 113, I upgrade to camera to 1.1.3 (developer). Now is there a ML 6D-113.fir or I simply reinstall 6D-112.fir?

Once I upgraded ML, there is a lot of files on bitbuckets. Do I update each files one by one (or all together?)

With the possibility that the Canon 6D can shoot RAW, it is more suitable to be a B-Roll camera with my Black Magic Cinema camera?

Its set in megabits. You can't do 90 megabytes. If we could we'd just save uncompressed and call it a day.

So what the max megabits we can set?

because 35 MB is 8 times more than 35 Mb, sorry for the megabyte, megabit thing.

So If I aim for 90 MB per sec video, I should set ML to what? 1800 Mb? 11.25 Mb? Is it even possible to reach 90MB? I'm lost.

Are you guys saying the 95mb sandisk is useless with the 6D? How its possible to record a120mbps video on a 35mb card!!??

The only cons I heard about BMC is moire issues.

gravity, does 6D a good b-roll camera with BMCC in terms of "matching colors"?

More I read this thread, more I get confused. I would like to shoot/test around 80mpbs. I have the scandisk extreme 95MB/s 10 card. Here the config I made:

On Camera:
BitRate: 8
InitQP: 10
Autoload Config: Override
Config Loaded: Yes
ConfigSelect: Rate Control
FPS overide: 24.000
FPS ramping: off

RC.ini notepad:
Transform8x8Flag = 2
Profile = 100
Level = 51
BitRate = 80000000
EntropyCodingMode = 1
IntraPicInitQP = -1
InterPicInitQP = -1
QpOffsetForB = 0
MinQpI = 1
MinQpP = 1
MinQpB = 1
MaxQpI = 16
MaxQpP = 16
MaxQpB = 16MinBitrate = 60000000
MaxBitrate = 80000000
SarWidth = 0
SarHeight = 0
AspectRatioIdc = 1
VideoFmtAndVspFlag = 81
VideoFullRangeFlag = 1
TimingInfoPresentFlag = 0
RateControlEnable = 2
ScalingMatrices = 0
pScalingMatrixAddr[0] = 0
pScalingMatrixAddr[1] = 0
pScalingMatrixAddr[2] = 0
pScalingMatrixAddr[3] = 0
pScalingMatrixAddr[4] = 0
pScalingMatrixAddr[5] = 0

Good? Not good?

If I already have ML on ym SD card, I can just add the new bin on the card or I have to re-install ML all over again?

If we shoot with high bitrate, we use ipb mode, right?