Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - kunle

#1
I have a 1.4 extender too need to go and look for it. :D
#2
Good video. I totally forgot to use X3 crop. Will try it next time.
#3
Film taken with Canon 5D MKIII with a Sigma 600MM mirror lens using Magic Lantern Raw. MLV files converted to DNG files using MLVMystic. DNG files edited using ClipHouse.

#4
Raw Video Postprocessing / Re: Pomfort ClipHouse
January 02, 2014, 10:38:17 PM
I had the same problem, the only way I could use the application was by right clicking on the raw file in finder and opening it with cliphouse. I actually like the application but the price is a bit too expensive for me.
#5
Tragic Lantern / Re: 50D and 40D Raw video
November 23, 2013, 02:00:22 PM
test video



Another Canon 50D Raw Test - Tragic Lantern
No Colour Correction made.
Latest tragic Lantern,
Resolution 1584x674 continuous
1984 x844 cropped continuous
Lens used
Moon shots - Sigma 600mm X 1.4 extender x 3 (Magic lantern crop)
all other shots Super Multi Coated Takumar f/1.4
Fotga Slim Wide band fader ND
Workflow
Son of Batch
Davinci Resolve 10 lite beta
FCPX




Latest tragic Lantern,
Resolution 1584x674 continuous
1984 x844 cropped continuous
Workflow
Son of Batch
Davinci Resolve 10 lite beta
FCPX


#6
Raw Video / Re: 60D RAW video - it's working !!!
November 18, 2013, 08:04:00 PM
Flocksock
I had the following results using the same card - I have just loaded the raw files in raw2cdng and the results are below:-

1728x972 137 frames
1728x736 205 Frames
1280x582 706 Frames
1280x720 395 frames

All at 23.98 FPS -Global draw etc disabled.

These were the results of the tests i did in September, I was so impressed with the results that I bought a second hand canon 50D for continuous recording.

#7
Raw Video / Re: 60D RAW video - it's working !!!
October 13, 2013, 02:34:33 AM



370 Frames
1280x720
Sandisk Extreme Pro 16gb 95mb/s
Tamron 17-50mm 2.8 VC
magic lantern latest build
Workflow
RawMagic
Davinci Resolve10 beta
FCPX




610 Frames
1280x582
Sandisk Extreme Pro 16gb 95mb/s
Tamron 17-50mm 2.8 VC
magic lantern latest build
Workflow
Rawmagic
After effects CS6
FCPX
#8
Tragic Lantern / Re: 50D and 40D Raw video
October 01, 2013, 08:45:15 PM
Yes I did. I even did a low level format and formatted it fat32 before using eoscard.I have gone through this procedure loads of times my other cameras. Might just be I got one of the bad komputerbay cards I have read about. Will return it to Amazon and order a different card.
#9
Tragic Lantern / Re: 50D and 40D Raw video
October 01, 2013, 08:15:07 PM
Thanks Andy600 for the quick response, the first thing I did when I got the camera was to check the firmware (It was V1.09) and I upgraded to the latest magic lantern firmware. The exact error on the camera was "Error CF". The CF was readable on both OS X and Windows operating systems.
#10
Tragic Lantern / Re: 50D and 40D Raw video
October 01, 2013, 07:41:13 PM
Quote from: kunle on October 01, 2013, 07:33:21 PM
Komputerbay 64gb Not Working

I just bought a cannon 50d and komputetbay 64gb 1000x cf card.  Unfortunately the camera can't see the card, well it does but it states that the card needs to be formatted, which the camera can't do. I reformatted the card to fat32 but still have the same problem. The camera reads my other Cf cards. Does anybody have any suggestions or recommend a similar card?
#11
Tragic Lantern / Re: 50D and 40D Raw video
October 01, 2013, 07:33:21 PM
Komputerbay 64gb Not Working
#12
Share Your Videos / Fuerteventura Time Lapse
May 01, 2013, 11:15:11 PM
A time-lapse video using magic lantern. taken with a 600D and sigma 10-20mm lens. All comments welcome.

#13
Share Your Videos / Re: CBR x3 Test video
September 06, 2012, 11:27:58 PM
1% I have a canon 60D and 600D can I use these settings with the current ML firmware? If so I cant find the settings for wav files.
#14
Share Your Videos / Re: CBR x3 Test video
September 06, 2012, 07:49:23 PM
1% thanks for the info, I just tried recording with qscale -13 and seems to be stable with audio turned on. Is the video quality (less compression) better using VBR over CBR?
#15
Share Your Videos / Re: CBR x3 Test video
September 06, 2012, 07:26:20 PM
I use a SanDisk Extreme Pro 16GB SDHC card, with the latest ML firmware. If audio is enabled recording stops immediately it starts.Recording the same scene without audio works fine. Are there any additional settings that need to be enabled/disabled e.g global draw?
#16
Share Your Videos / Re: CBR x3 Test video
September 06, 2012, 05:10:39 PM
Snapping your finger in front of the camera while recording video and audio, seems to be a good idea. I havent tried it yet.
#17
Share Your Videos / Re: CBR x3 Test video
September 06, 2012, 03:22:13 PM
Quote from: AriLG on September 06, 2012, 11:14:39 AM
How did you sync the muted video file and the H1 based one ?

syncing was a bit difficult but I didn't spend much time planning and editing audio. I just captured the welding and banging noises in fcp and put it against the video timeline. and then I captured a sample of the background noises and dropped in the timeline. If there was dialogue it would have been very difficult. Does anybody have any ideas to get around this? I would normally use the audio captured in the camera as a reference point during sync.
#18
Share Your Videos / CBR x3 Test video
September 06, 2012, 10:16:21 AM
While on holiday decided to test the cbr x 3 feature in magic lantern. To get it to work I had to disable audio. Captured audio using Zoom H1.
Camera used was a 600d using samyang 35mm f/1.4 wide open. Magic Bullet looks was used for Colour correction. All comments welcome.



#19
Share Your Videos / Chain Bridge Budapest at Night
September 01, 2012, 01:36:51 PM
Please have a look at my first attempt to use magic lantern during a short visit to Budapest.
Shot at night with a canon 60D and 600D using a Samsung 35mm f/1.4 and Tamron 17-50mm f/2.8 vc lens. Music captured using zoom H1.