Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - martin_a

Raw Video Postprocessing / Re: ProRes 4444 XQ
March 29, 2015, 02:46:03 PM
I have the same problems with AE CC 2014...

I'm reinstalling the previous version of After Effects... Is it possible to work on PP CC 2014 with some 4444 XQ files ?

Thanks !
Quote from: Walter Schulz on July 27, 2014, 07:28:37 PM
Download and install EOS Utility.

EOS Utility does not see the MLV files...
Yes of course, but when I plug my 5D Mark III in my laptop i would like to see the CF card to download my MLV files on my MacBook pro...
I'm trying now to move the files from the CF to the SD and then put the SD on my MacBook Pro but it's not working... Is there a help file somewhere ?
I'm on a trip and dont have card reader available... So i really need a way to empty my CF card without a card reader :)
Sorry but that wasn't the question...
Is it possible to dowload files from a CF and SD card from my 5D Mark III without a card reader ? Just with the USB cable provided ?

Thanks guys !
Raw Video / Re: Problem in 2:35 mode...
July 24, 2014, 06:15:04 PM
Thanks for this answer :)
Raw Video / Problem in 2:35 mode...
July 24, 2014, 06:02:49 PM
Hi guys,

I'm trying the different aspect ratio ML RAW is providing. I dont understand why i can't get an higher definition than 1920x818 in the 2:35 modes ???  :'(

I have a good 1066 lexar card...  :D
Raw Video Postprocessing / Re: ProRes 4444 XQ
July 13, 2014, 10:40:06 AM
Quote from: reddeercity on July 12, 2014, 10:42:43 AM
Hey guy just did a small project with the prores 4444 XQ , I think this will work very well with ML raw to retain the information.
With the combination of A.E. (ACR) and apple prores 4444 XQ . Being its a Linear Codec No clipping there is not reason it can't be used
to archive magic lantern files . I was getting around 425Mb/s @ 1856x928 23.976 . The video clip below was 19 GB of Cdng's  and with ProRes4444 XQ
is was 16bit 13.4GB @ 410 Mb/s at  1:4.5 Compression . Basically its a true HDR Codec. If ARRI using it there must be something good about it !
ALEXA XR/XT supports new ProRes 4444 XQ  link to announcement -->

How did you convert cDNG to ProRes XQ ?
Raw Video Postprocessing / Re: ProRes 4444 XQ
July 07, 2014, 03:38:24 PM
Quote from: reddeercity on July 07, 2014, 08:47:01 AM
I use A.E. cc with the ACR to make this files with Apple ProRes 4444XQ

How do you do this ?
You should try to apply the cinestyle LUT to your RAW footage and see if it matchs ;)
Its a cDN 16bits file converted in ProRes 4444 using AE...
Nobody here ? :(
Why do i get those strange lines in Speedgrade with my cDNG files, converted with RawMagic in 16 bit, converted in prores with AE ???

How is it possible in Speedgrade ?
I just did a few tests with Speedgrade CC 2014 and i think there is still a decoding problem in it :(

Here is what i get when i put my DNGs in After Effects :

Before any correction :

After correction :

And here is what i get in Speedgrade :

Before any correction :

After correction :

Any idea why ? The white balance is wrong and i can't correct it... The highlights seems to be wrong too...

Any other tests ?
I'm using RawMagic to convert my MLV files to cDNG but i can't put these files into Premiere Pro, 7.2 or 8.0 dont work... How are you doing this ?

By the way, look what i just found in the Speedgrade CC 2014 release notes :

Canon 5D mk III CinemaDNG sample from 14-bit RAW : Added support for cDNG footage from Canon 5D MarkIII with Magic Lantern

Link :

I'm going to give it a try :)
Hi guys,

I've the last nightly build installed on my 5D Mark III running 1.2.3. I did a few tests yesterday with my 24-70mm f/2.8L II USM with AF. I've recorded a mlv clips with sound from a rode video mic pro on a LEXAR 32 Gb 1066x, I'm converting my clips from mlv to DNG with MlRawViewer and i have a few questions...

  • I have those vertical lines a few of you get too, what can I do ?
  • When i try to open a DNG sequence with AE it's not recognized as a sequence as it is when i first modify the DNG in lightroom, why ?
  • The white balance is never the same as the one I have in the live view... Can I fix it ?

I've been searching answers on this forum for a few days but I found nothing... Thanks for your help !
Sounds like a ****ing nice question  :D :D :D

Is the HDMI port of the 5D Mark III 4K capable ?  ???

// I don't think the use of language was really necessary on this occasion.  Audionut.
One of these, the 32Gb one, is arriving tomorrow at home for a test... I'll get a 256Gb one for sure if it works nice for me :)

I'll tell you if it works right and if i get significant results in term of performance !  8)
General Help Q&A / Re: Focus ramping help ?
August 23, 2012, 11:11:55 AM
Ok i finally got it, but i had a strange thing at the end of the shot, the focus point went back  :-\
General Help Q&A / Re: Focus ramping help ?
August 22, 2012, 09:53:44 AM
Great news !

Hope it would come before the weekend, i have a timelapse shoot planned :)
General Help Q&A / Focus ramping help ?
August 22, 2012, 09:18:30 AM
Hi guys,

Just downloaded the ML 2.3 release, i'm very excited about the focus ramping function but i cant make it work :(

There is nothing in the help about this function : there is a bulb/focus ramping part in the UsedGuide but it only talks about the Bulb ramping and not the focus ramping thing.

I cant make it work, can you help with a tutorial ?

Thanks !!!