Messages

I'm not sure, but ... isko, he speaks about something else, about the alternative firmware .... no?

5DMIII 1.2.3 
CRASH 00-
ASSERT: hLvJob->hJpegMemSuiteat ./Epp/Vram/VramStage.c:891, task Epplv:1 mode:3
Magic Lantern version : Nightly.2016Dec01.5D3123 Mercurial changeset   
: 385bc44ed158+b3dfbe7194f3+ (5D3-113_123_10bit_12bit) tip
Built on 2016-12-01 23:09:48 UTC by rosiefort@RosieFoComputer.
Free Memory  : 146K + 3712K
CRASH01-
ASSERT: IsSuiteSignature( hSuite ) at ./PackMemory/PackMem.c:599, task Epp
lv:0 mode:3Magic Lantern version : Nightly.2016Dec01.5D3123
Mercurial changeset   : 385bc44ed158+b3dfbe7194f3+ (5D3-113_123_10bit_12bit) tip
Built on 2016-12-01 23:09:48 UTC by rosiefort@RosieFoComputer.
Free Memory  : 146K + 3728K
CRASH02-
ASSERT: hLvJob->hJpegMemSuiteat ./Epp/Vram/VramStage.c:891, task Epp
lv:1 mode:3 Magic Lantern version : Nightly.2016Dec01.5D3123
Mercurial changeset   : 385bc44ed158+b3dfbe7194f3+ (5D3-113_123_10bit_12bit) tip
Built on 2016-12-01 23:09:48 UTC by rosiefort@RosieFoComputer.
Free Memory  : 153K + 3719K

I could do it, but I do not quite understand, this is a firmware for the camera, and I can test it?
  My camera has 1.0.5 firmware, it will not work with ML?

I only have 400-х speed on my CF 

My first video film  from RAW:

video without compression - http://yadi.sk/d/gLaQbR-x5SeBU

with firmware May 30, I have no problem with 1920Х720 on cards with a 400 x speed.
  This is good!

hi,
i have some strange vertical lines in all my raw video footage.. ? anyone else seen that?

This is not a problem. You must use the Denoiser

You really do not need to have the cf_acc.mo module. That is just part of the cf card test.

Oh, it's this, my card was quickly shut down when filling bufera?
  before more than 100 frames to write without problems, now after 60  off the record (RAW)
...
I remove the file from the card and it was much better!
  Now I shut easily 370 shots!

5D3 update files. Replace existing files. 
https://drive.google.com/folderview?id=0B7QlH_BH2m32QjRhRDhUeVBwZmM&usp=sharing
includes cf_acc: module as noted on http://www.magiclantern.fm/forum/index.php?topic=5471.msg36588#msg36588

Thank you, everything works.
   Now there is no problem switching standard movie recording in H264 after turning off the RAW.

[
Camera: 5D Mark III
Build: Magic Lantern May 17 (f686b8c)

This is the latest build?
And you can download it somewhere?

alex found the issue and worked it around.
https://bitbucket.org/hudson/magic-lantern/commits/d6bca45d8f31554fd0ab71b628a6b04a8e56b3e9

Please forgive me, what should I do?

I have a problem with the last firmware update.
If you use the record in RAW, and then turn it off
then when I enable basic video(H264) shooting and then turn off, the camera freezes. Displays the last frame and stop everything.
  Turning off the camera does not work, still image is still visible.
  It was only when the camera is off remove AKM and then work fine!

we must look at the picture. you see the difference? see everything. is it good? or is it not necessary to lay out, because who thinks otherwise?
My clients do not need to RAW, it is important to the quality of accessible format to watch at home.

Just from filming the concert.
And I found a few minutes to record RAW, My boss will be very sad, but I did it!
But now the video in RAW, I was not able to record more than 20 seconds without dropping frames.
I just need a high-speed  flash !
And...By the way, I do a little correction on RAW, and it's not very good ....
You can see this for yourself:

If you are interested in an uncompressed download here:
http://yadi.sk/d/OAtKYdwJ4uPav

The firmware. A zip file containing autoexec.bin and ML folder.

Thank you,
Cristian

http://yadi.sk/d/xLeAyYky4qek0

@Peter Linov

Can you pls post a link or just post the build you are using for 5dmk3?
I'm trying the ommit b6c2ae6 commit but can't open dng files.

Sorry, my English is not very good.
The settings in the camera 5DMIII?
Or how I process RAW, what .... I'm sorry, I do not understand.

parameters are the same for both videos!
there is no difference
diaphragm 8
  shutter 500
  iso 125

How ?? On a 5Dmk3? You are not skipping any frame on long shots?

Using Commit b6c2ae6 on a 5Dmk3 I'm able to do max 1920 x 680 on a Lexar Professional 600x UDMA 16Gb card. From 1920 x 700 it begins to skip frames.

Yes, I have no problem with the 400x at 1920х720.
I use a flash card Transcend 64Gb
Here's another video on my street:

If you are interested in an uncompressed download here:
http://yadi.sk/d/G0lQEtqk4tG56

I do not have the 1000-х  flash card. But on 400-x  working well with 1920х720!
500мм f6.3,  SIGMA150-500...

If you are interested in an uncompressed download here:
http://yadi.sk/d/YJZ82AMJ4t7Ac

I also do experiments with RAW
This is very interesting, but I need a fast flash drive!
and some video:
http://www.youtube.com/watch?v=ONIKL8s6uVw
http://www.youtube.com/watch?v=OPuVHyEyc6U
http://www.youtube.com/watch?v=NbCnVhckcYg

I put this firmware, enjoy!
  tomorrow to work a lot, shoot a video for a wedding.
  I will try that!!
  Thank you!

 I can not download, and really want to ... I'm sad ...

Отличная новость , Спасибо...sorry...Great news! Thank you!
But I can not download ...  sad.