Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Felipe

Pages: [1] 2 3 ... 11
1
Hola, use una Kingston Canvas React V30, tiene que ser V30. PUEDE SUBIR HASTA 2.4X PERO NO QUIERO COMPROMETER EL SONIDO, POR ESO LO
TENGO EN UN COMODO 2.0 X

2
Yes raw could be better but in some instances the time limit is a problem.
I notice a lot between 45 mbs and 90 mbs not only is more gradable but also has less artifacts and noise.

3
Raw is the best option for máximum results in grading however when takes of minutes are needed an option is increase the bit rate, on this was 2x aprox. 90 mbs.



4
On this shot, I went with 2x bit rate giving me around 90 MBS, and is noticeable how the grading possibilities increase


5
Camera-specific discussion / Re: Canon 650D / T4i
« on: April 29, 2019, 03:05:45 PM »
@Danne is there a 105 versión?

6
Camera-specific discussion / Re: Canon 650D / T4i
« on: April 29, 2019, 01:45:54 AM »
Enjoy your trip and make nice videos
Should include the regular 3x crop existing in the previous build, so if needed

7
Camera-specific discussion / Re: Canon 650D / T4i
« on: April 28, 2019, 11:52:22 PM »
@dfort: Do you have one for 105 to test?

8
Feature Requests / Re: Save movie crop upon start up
« on: November 05, 2018, 02:37:21 AM »
Please make the 100D with the same code or whatever it is from October 19.
Holds cropping turning off from the camera switch, Changing the battery and changing the card.
Can be disabled from the Canon menú and from ML Menu. And again has nothing to do with the crop module that I deleted and
the crop new features are totally functional.

9
Feature Requests / Re: Save movie crop upon start up
« on: November 05, 2018, 02:25:32 AM »
No dfort none of the crop new features work in this build.
The Oct 19 build Everything Works perfect .
Deleted the crop module from the oct 19 build and Works perfect, YES I thought was the module but has nothing to do.


10
Feature Requests / Re: Save movie crop upon start up
« on: November 04, 2018, 10:20:35 PM »
- YESSS THE KEY for total satisfaction with the V105 650D is to use the crop_module included in the dfort build oct 19.

- The 100D is missing that module, that is why only holds crop when turning it off from the switch.

- Tryed to copy de crop_module from the 650D to the modules folder of the 100D and does not work as the 650D.



11
Feature Requests / Re: Save movie crop upon start up
« on: November 04, 2018, 09:48:34 PM »
Now the 650D  v105 stays in crop mode when I turn it off , when take out the battery and when I take off the card,
and can be disabled with the Estándar Canon menú.

THE REASON IS I always erase all the modules since I don't use them, but Noticed that having the crop_rec.mo as well as always with the 650D_105.sym.
The camera stays in crop mode.



12
Feature Requests / Re: Save movie crop upon start up
« on: November 04, 2018, 03:19:16 AM »
Great Daniel, The 100D Does the same, But does not stay in crope mode when the battery door opens to change battery and then close it.
As well doesn't work when I change the sd card.
Same happens with the 650D Versión 105.

The 2 cameras keep the crop mode only when the camera is turned off from the switch and then turned on. Fantastic!!.

Also the cropmode can be disabled from the Canon Menu for both cameras.

Of course if I take out the sd card the camera does not stay in crop mode.

13
Camera-specific discussion / Re: Canon 650D / T4i
« on: November 03, 2018, 06:33:17 PM »
Both Cameras 100D and 650D, when opening battery door return to non crop mode after being in crop mode.

14
Camera-specific discussion / Re: Canon 650D / T4i
« on: November 01, 2018, 06:12:03 PM »
Ok Dfort on the 650D, Tested versión 105 I found at your downloads page and as well as the 100D,
When I turn off the camera in crop mode and turn it on again remains in crop mode,Fantastic Function. Thank you!!
From Canon Quick Menu Can not disable Crop switching to any other resolution it just doesn't move stays fixed in 1080 or which ever resolution is in.
However it does disable crop mode from Canon Standar Menu which is great, Probably you can fix the error on Canon quick Menu.

15
Camera-specific discussion / Re: Canon 650D / T4i
« on: November 01, 2018, 02:34:39 PM »
Done Walter, to the point, Corrected Reply.

16
Camera-specific discussion / Re: Canon 650D / T4i
« on: November 01, 2018, 07:09:35 AM »
On the 100D, From Canon Quick Menu Can not disable Crop switching to any other resolution it just doesn't move stays fixed in 1080 or which ever resolution is in.
However it does disable crop mode from Canon Standar Menu which is great, Probably you can fix the error on Canon quick Menu.

17
Camera-specific discussion / Re: Canon 650D / T4i
« on: November 01, 2018, 07:02:09 AM »
I do use the Crop mode with the 100D, AND YES IT DOES WORK, When I turn off the camera in crop mode and turn it on again remains in crop mode,Fantastic Function.
Thank you!!

18
Camera-specific discussion / Re: Canon 650D / T4i
« on: August 28, 2018, 05:45:38 PM »
Canon says that but test yourself the two firmwares and see the difference in focus with any lens.
OOOOH yes is A1ex  :-X

19
Camera-specific discussion / Re: Canon 650D / T4i
« on: August 27, 2018, 05:32:53 AM »
Yep I downloaded it some time ago and more than happy with it since Movie servo, autofocus, Face detection is better tan 1.0.4
and other features are just as reliable as previous firmware.
By the way Thank you. I think the CEO name is Artex from Art

20
Camera-specific discussion / Re: Canon 650D / T4i
« on: August 26, 2018, 03:53:30 AM »
Any chance ML CEO Updates the firmware to 1.0.5 So all we go in the same wagon.
No doubt autofocus in video live view is better.
Just saying, Thank you!

21
Camera-specific discussion / Re: Canon 650D / T4i
« on: June 26, 2018, 06:41:01 AM »
It is

22
Camera-specific discussion / Re: Canon 650D / T4i
« on: May 25, 2018, 06:12:36 AM »
@dfort. Yes you are exactly right, Thank you

23
Camera-specific discussion / Re: Canon 650D / T4i
« on: May 23, 2018, 02:10:20 PM »
I'm using the lua_fix 2018 april 28 version when I enable customize menus and then go to the Help tab and there I find these items like Press info, Set etc
and when you press set you have the option to hide that line or place it in the favorites tab. I'll like to hide some of them or all of them.
To hide them after pressing set a red X shows up, That doesn't work, DIFFERENT to 104 where was possible to hide them.

24
Camera-specific discussion / Re: Canon 650D / T4i
« on: May 22, 2018, 11:17:53 PM »
@dfort, As I said everything seems working GREAT, However I'll like to disable some items in the info tab and can not by customize Menus

25
Camera-specific discussion / Re: Canon 650D / T4i
« on: May 22, 2018, 03:34:15 PM »
@dfort, Thank you for your version 105, upgraded from 104 to 105, and as you said camera works just as well as with previous firmware.
 If after extensive testing find any issue will let you know here!!
Have to say that servo focus  at 100 mbs increasing bit rate 2.3 shows better performance than previous firmware!!

Pages: [1] 2 3 ... 11