Topics

Good day everyone,

I really don't want to be annoying and polluting this forum is not my goal but since I was not lucky in getting answer with my previous post, I am starting a new topic again. I see that a lot of people managed to get their camera back to life after getting Err 70 and this gives me hope.

My problem is exactly the same than the one that are described in many posts (see crash log below). I am only able to open the camera in C mode, thus, it is not possible for me the clear all settings.

I don't know a thing about software development. I am currently trying to learn how to compile a version on which I will have installed assertion handler but I must say that this is like Chinese to me.

I don't even know through which process I could set right value through a prop_request_change or call FA_Setdefaultseting has it is described in the unbricking section.

Any info or help that would allow me to get my camera back would be great. Getting a copy of an Autoexec file with assertion handler would be even better. Of course, I would be willing to pay someone that would offer me serious help.

Thanks in advance...by the way, please forgive my bad Engish ;-)

JFG

Thu Oct  1 16:43:37 2015
      0:    11.810 [STARTUP]
K287 ICU Firmware Version 1.1.1 ( 3.3.7 )
      1:    11.884 [STARTUP]
ICU Release DateTime 2012.05.14 13:18:25
      2:    12.234 [SEQ] CreateSequencer (Startup, Num = 6)
      3:    12.490 [SEQ] NotifyComplete (Cur = 0, 0x10000, Flag = 0x10000)
      4:    14.254 [SEQ] seqEventDispatch (Startup, 0)
      5:    14.282 [STARTUP] startupEntry
      6:    52.556 [PROPST] Initialize Adjective & Situation
      7:    52.938 [HPD] # 1 0 1
      8:    56.407 [PROPST] Clear Adjective & Situation (StartupCondition)
      9:    56.821 [PROPST] AEMode New:0 Last:0
     10:    56.917 [PROPST] Active Adjective & Situation
     11:    57.038 [PROPST] ReqChangeCBR : Adjective 0, 0
     12:    57.079 [PROPST] Not ExecMultiConvert Already None : Adjective 0, 0
     13:    57.159 [PROPST] Not ExecMultiConvert : Situation 0
     14:    57.227 [PROPST]  CurrentAdjective 0 0
     15:    58.695 [HPD] CreateTask Master End
     16:    60.330 [EM] emSlaveChangeCBR : AUTO_POWEROFF (1)
     17:    60.498 [EM] emSlaveChangeCBR : UILOCK (0x0)
     18:    60.999 [HPD] ERASE SW OFF
     19:   110.830 [STARTUP] startupPropAdminMain : End
     20:   110.908 [SEQ] NotifyComplete (Cur = 1, 0x20000002, Flag = 0x20000000)
     21:   120.225 [SEQ] NotifyComplete (Cur = 1, 0x2, Flag = 0x2)
     22:   120.792 [PROPST] AEMode New:0 Last:0
     23:   121.211 [PRP] Deliv WaitID = 0x80000001, 0xFF1B8BF8(1)
     24:   122.039 [PRP] Complete WaitID = 0x80000001, 0xFF1B8BF8(0)
     25:   122.172 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 1034
     26:   122.800 [PRP] MovieParamData
     27:   122.948 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0xf zoom 0x0
     28:   123.089 [PROPST] NTSC->PAL 0 25 12
     29:   123.131 [PRP] fRetry mode 0 size 0x0 , framerate 0x19 , type 0xc
     30:   123.781 [PRP] mode 0 size 0x0 , framerate 0x0 , type 0x0 zoom 0x0
     31:   124.722 [SEQ] seqEventDispatch (Startup, 1)
     32:   124.977 [STARTUP] startupPrepareProperty
     33:   126.103 [PROPST] AEMode New:7 Last:0
     34:   126.141 [PROPST] FromSaveTimming = 2(489)
     35:   127.113 [PRP] Complete WaitID = 0x8000003F, 0x00000000(0)
     36:   128.954 [FM] FM_Initialize (0, 1, 0)
     37:   129.356 [FM] fmResultCBR (0x80e4a4)
     38:   130.374 [FM] PROP_HDD_DCIM_PATH (/)
     39:   130.614 [FC] FC_Initialize [drive:3][ClassID:39]
     40:   130.865 [FM] PROP_CARD1_STATUS = 0x1
     41:   131.013 [FM] PROP_CARD1_FOLDER_NUMBER = 142
     42:   131.133 [FM] PROP_CARD1_FILE_NUMBER = 0
     43:   131.284 [FM] PROP_CARD2_STATUS = 0x1
     44:   131.409 [FM] PROP_CARD2_FOLDER_NUMBER = 100
     45:   131.509 [FM] PROP_CARD2_FILE_NUMBER = 0
     46:   131.624 [FM] PROP_CARD3_EXIST = 0
     47:   131.679 [FM] PROP_CARD3_STATUS = 0x1
     48:   131.743 [FM] PROP_CARD3_RECORD = 0 => 0
     49:   131.809 [FM] PROP_CARD3_FOLDER_NUMBER = 100
     50:   131.904 [FM] PROP_CARD3_FILE_NUMBER = 0
     51:   132.018 [FM] PROP_FILE_NUMBERING_MODE = 1, 0
     52:   132.086 [FM] PROP_CARD_EXTENSION = 53
     53:   132.147 [FM] PROP_CURRENT_MEDIA = 2
     54:   132.213 [FM] PROP_USBDEVICE_CONNECT = -1
     55:   132.280 [FM] PROP_NUMBER_OF_CONTINUOUS_MODE = 0
     56:   132.322 [SEQ] NotifyComplete (Cur = 2, 0x10, Flag = 0x10)
     57:   132.456 [FM] PROP_DSDEFINE ModelId 80000287
     58:   132.538 [SEQ] seqEventDispatch (Startup, 2)
     59:   132.563 [STARTUP] startupPrepareCapture
     60:   133.212 [RSC] hMemoryQueue (0x620010) hStorageQueue (0x640012)
     61:   134.862 [RSC] AllocateMemoryUnit For ExMem1
     62:   134.886 [RSC] AllocateMemoryUnit For ExMem1_2
     63:   134.907 [RSC] AllocateMemoryUnit For OnlyMem1
     64:   136.167 [RSC] MemMgr(IMAGE) 0 2
     65:   136.198 [RSC] MemMgr(IMAGE) 0 0
     66:   136.225 [RSC] MemMgr(IMAGE) 0 7
     67:   136.249 [RSC] MemMgr(IMAGE) 0 0
     68:   136.315 [RSC] PROP_MEMORY_STATUS(SELF) (0->)3 (OTHER) 3
     69:   136.334 [RSC] Deliver PROP_MEMORY_STATUS 3
     70:   136.871 [RSC] SRMExMem1_1State Event 0 Result State 0->6
     71:   136.910 [RSC] hExMem1_2StateObject Through Event 0 State 0
     72:   137.529 [RSC] SRMExMem1_1State Event 4 Result State 6->6
     73:   137.560 [RSC] hExMem1_2StateObject Through Event 4 State 0
     74:   138.320 [RSC] this->dwCardStatus[0] = 0x1(552)
     75:   139.055 [RSC] this->dwCardStatus[1] = 0x1(552)
     76:   139.813 [RSC] this->dwCardStatus[2] = 0x1(552)
     77:   140.523 [RSC] PROP_PC_HDD_STATUS = 0x1
     78:   141.470 [RSC] NO IMAGEFORMAT EstimatedSize.c 45
     79:   141.505 [RSC] NO IMAGEFORMAT EstimatedSize.c 45
     80:   141.547 [RSC] ERROR SetDevelopImageCondition DevelopCombination.c 107
     81:   142.522 [RTC] !! RTC CHECK ERROR !!

     82:   145.532 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 128
     83:   145.765 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 128
     84:   145.979 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 128
     85:   147.267 [JOB] InitializeJobClass (ID = 11813, Num = 17)
     86:   147.547 [JOB] [BIND] dcsResultCBR (0x931aa0)
     87:   147.825 [JOB] PROP_CFN_TAB2 2 0
     88:   149.567 [STARTUP] ERROR ASSERT : DevelopCombination.c, Task = RscMgr
     89:   149.652 [STARTUP] ERROR ASSERT : Line 108
     90:   149.701 [STARTUP] ERROR ASSERT : FALSE
     91:   149.791 [STARTUP] ASSERT Time 1899/12/31 0:0:0
     92:   151.458 [STARTUP] startupErrorRequestChangeCBR (0x1d)
     93:   151.581 [STARTUP] startupErrorRequestChangeCBR : ErrorSend (101, ABORT)
     94:   152.002 [CERES]  RegisterGPSInfoCallback
     95:   152.718 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     96:   154.008 [JOB] InitializeInnerDevelopJobClass (ID = 11813, Num = 16)
     97:   154.087 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 10 )
     98:   155.513 [SND] Seq LPC 5-0
     99:   155.563 [SND]  HARB_ARBMODE  Before:0x00000000 Current:0x00000000
    100:   155.606 [SND]  HARB_HARBCTRL Before:0x002AEAA8 Current:0x002AEAA8
    101:   155.619 [SND] Seq LPC 5-1
    102:   155.673 [SND] Seq LPC 5-2
    103:   155.716 [SND] Seq LPC 5-3
    104:   155.765 [SND] Seq LPC 5-4
    105:   155.782 [SND] Seq LPC 5-5
    106:   155.798 [SND] Seq LPC 5-6
    107:   156.209 [SND] Seq LPC 5-7
    108:   156.221 [SND] Seq LPC fin
    109:   158.046 [SEQ] NotifyComplete (Cur = 3, 0xe0110, Flag = 0x40000)
    110:   158.271 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 147
    111:   158.496 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 147
    112:   158.717 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 147
    113:   159.174 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 147
    114:   159.404 [EM] emRegisterMulticastCallback : EventID = 5, ClassID = 147
    115:   159.703 [EM] emRegisterMulticastCallback : EventID = 6, ClassID = 147
    116:   159.929 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 147
    117:   160.144 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 147
    118:   160.360 [EM] emRegisterMulticastCallback : EventID = 8, ClassID = 147
    119:   160.567 [EM] emRegisterMulticastCallback : EventID = 9, ClassID = 147
    120:   160.787 [EM] emRegisterMulticastCallback : EventID = 10, ClassID = 147
    121:   160.995 [EM] emRegisterMulticastCallback : EventID = 17, ClassID = 147
    122:   161.228 [SHTC] scsInit
    123:   162.350 [ENG] [ENGIO](Addr:0x5c880000, Data:0x   30000)
    124:   168.176 [SEQ] NotifyComplete (Cur = 3, 0xa0110, Flag = 0x80000)
    125:   168.409 [SHTB] sbsInit
    126:   168.708 [SHTB] VShadingAddress:0x5c8c9960, Size:901120
    127:   170.058 [SHTP] spsInit
    128:   170.297 [FM] FM_RegisterSpaceNotifyCallback
    129:   170.626 [MRK] RegisterSpaceNotifyCallback : DriveNo = 2
    130:   170.815 [FM] voiRegisterSpaceNotifyCallback : DriveNo = 2
    131:   170.989 [FM] RegisterSpaceNotifyCallback : DriveNo = 2
    132:   171.165 [FC] FcmcRegisterSpaceNotifyCallback : DriveNo = 2
    133:   172.641 [FM] FM_RegisterSpaceNotifyCallback
    134:   173.237 [SEQ] NotifyComplete (Cur = 3, 0x20110, Flag = 0x100)
    135:   173.550 [WFT]  TOM_Initialize
    136:   174.589 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 158
    137:   174.834 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 158
    138:   175.062 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 158
    139:   175.838 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 167
    140:   176.075 [EM] emRegisterMulticastCallback : EventID = 11, ClassID = 167
    141:   176.111 [EM] Already SW1OFF
    142:   176.246 [MC] cam event metering timer start
    143:   176.452 [EM] emRegisterMulticastCallback : EventID = 7, ClassID = 167
    144:   176.665 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 167
    145:   176.879 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 167
    146:   177.091 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 167
    147:   177.296 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 167
    148:   177.506 [EM] emRegisterMulticastCallback : EventID = 18, ClassID = 131
    149:   177.720 [EM] emRegisterMulticastCallback : EventID = 19, ClassID = 131
    150:   178.456 [EM] emRegisterMulticastCallback : EventID = 13, ClassID = 167
    151:   178.593 [TA10] TA10_Initialize : Start
    152:   179.137 [TA10] TA10S_Initialize : Start
    153:   179.214 [TA10] TA10S_Initialize : CreateStageClass
    154:   179.578 [TA10] TA10S_Initialize : End
    155:   179.728 [TA10] TA10_Initialize : End
    156:   180.020 [FM] fmInitialized
    157:   180.128 [FC] _FC_SetDirSuffix (CANON)
    158:   180.225 [FC] _FC_SetConsecutiveMode (mode = 1, DCF = 0)
    159:   180.359 [FM] fmPrepare
    160:   182.219 [FM] ALV_Initialize (36, 25)
    161:   182.636 [FM] fmAllocDcfNo(0x80e260)(0x0)
    162:   188.523 [PRP] MovieParamData
    163:   188.633 [PRP] mode 0 size 0x0 , framerate 0x19 , type 0xc zoom 0x0
    164:   190.122 [TERM] terminateChangeCBR : SHUTDOWN (255)
    165:   190.148 [TERMINATE] SHUTDOWN init comp
    166:   190.289 [TERM] terminateChangeCBR : AUTO_POWEROFF (1)
    167:   190.360 [TERMINATE] Abort init comp
    168:   191.135 [JOB] PROP_CFN_TAB2 3 1
    169:   192.316 [WFT]  PROP_WFT_IMAGE_TRANS (1)
    170:   194.268 [MC] PROP_DISPLAY_OFF_SENSOR : 1
    171:   194.492 [MC] DisplaySensor : 1(0)
    172:   195.278 [MC] PROP_GUI_STATE 0
    173:   195.508 [MC] PROP_LV_ACTION : LV_STOP
    174:   195.664 [MC] PROP_LV_DISPBUSY : not Busy
    175:   195.815 [MC] PROP_LV_LOCK : LVLOCK_PERMIT
    176:   195.965 [MC] PROP_DISABLE_PLAY_IMAGE : Enable Play
    177:   196.137 [MC] JobState 0
    178:   197.230 [MC] QRTime : 2
    179:   197.801 [MC] PROP_VARIANGLE_GUICTRL : Enable
    180:   198.238 [MC] regist master CardCover

Hi everyone one,

Could someone tell me if it is possible to install ML while being in C mode? My 60d got bricked (Err 70)and I can only open it under this mode. I was able to upgrade the firmware but when I launched ML installation process, I got the Err 70 again before getting the green confirmation screen.

Is it because I'm in C mode or could it be something else?

I would like to get ML in order to get a crash log.

Thanks,

JFG

Good day everyone,

This issue was already discussed here in the past but since the post I wrote have stayed unanswered for several weeks, I've decided to try again with a fresh topic.

I am seeking some help in order to unbrick my Canon 60d. Of course, I am willing to pay for this help if the procedure is successful.

The problem I have is very similar to many ones that were described on the forum:

-   I am getting Error 70 after the camera got slightly wet.
-   The camera can be initiated in C mode but I need to take the battery out first.
-   I was able to successfully update the firmware.
-   I tried running ML. I got Err 70 few second after lunching the firmware update with ML on card. I did not get any crash log.
-   I have set new picture parameters using GPHOTO2 but it did not work.

From what I understand, it is possible the forced reboot the camera using a modified autoexec file with disabled assertion. I don't currently have the knowledge to create such a file.

If this is indeed the way to go, I am wondering if someone share this autoexec file with me,

Thanks in advance,

Jean-François Gagnon
[email protected]