Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - m1k6

#1
Hello everyone.
I'm trying to setup Ubuntu in Virtualbox to compile ML.
I installed Ubuntu 16.04 (LTS) and Mercurial.
To install gcc I followed these instructions (prebuild compiler).
After cloning the repo I adjusted the Makefile.user so it matches the paths.

Now the problem:
When using "make zip/install" to compile ML I get the following error:
marvin@Ubuntu-VM:~/magic-lantern/platform/1200D.101$ make zip
../../Makefile.inc:65: remove /home/marvin/magic-lantern/platform/1200D.101/zip
[ RM dir ]  /home/marvin/magic-lantern/platform/1200D.101/zip/
mkdir -p /home/marvin/magic-lantern/platform/1200D.101/zip
[ MKDIR    ]   ML directory structure...
[ AS       ]   entry.o
/bin/sh: 1: /usr/lib/gcc/arm-none-eabi/5.4.1: Permission denied
../../Makefile.filerules:31: the rule for target ,,entry.o" failed
make: *** [entry.o] Error 126


My Makefile.user:
#User-defined values for ML build system
#Copy me to Makefile.user, keeping ONLY the options that you want to customize

UNAME:=$(shell uname)

ifeq ($(UNAME), Darwin)
# Variable declaration for Mac OS X
UMOUNT=hdiutil unmount
CF_CARD="/Volumes/EOS_DIGITAL"
STAT_CMD=stat -f "%N: %z bytes"
else
# Default settings for remaining operating systems
UMOUNT=umount
# CF_CARD=/media/EOS_DIGITAL
CF_CARD:=$(shell mount | grep -oE "[^ ]+/EOS_DIGITAL[^ ]*")
STAT_CMD=stat -c "%n: %s bytes"
endif

# change this if you have to mount the card every time you run "make install"
# examples:
# MOUNT_CARD=gvfs-mount -d /dev/mmcblk0p1
# MOUNT_CARD=gvfs-mount dav://192.168.0.1/
MOUNT_CARD=

# Supported camera models
SUPPORTED_MODELS:=50D 60D 550D 600D 500D 5D2 5D3 7D 650D 700D EOSM 1100D 1200D 6D

# Supported camera models for "UNIFIED" builds (Digic IV only)
SUPPORTED_UNIFIED_MODELS:=50D 60D 550D 600D 500D 5D2 1100D 1200D

# GCC-related stuff
# for yagarto or the official ARM toolchain use ARM_ABI=none-eabi otherwise use ARM_ABI=elf
ARM_ABI=none-eabi
GCC_VERSION=5.4.1
DIETLIB_VERSION=0.33

NEWLIB_OPT_LEVEL=O3
DIETLIBC_OPT_LEVEL=Os

ARM_PATH=/usr/lib/gcc
ARM_BINPATH=$(ARM_PATH)
ARM_LIBGCC_PATH=$(ARM_PATH)/lib/gcc/arm-$(ARM_ABI)/$(subst -,,$(GCC_VERSION))
NEWLIB_PATH=$(SRC_DIR)/libs/arm-$(ARM_ABI)-$(NEWLIB_OPT_LEVEL)
DIETLIBC_PATH=$(SRC_DIR)/libs/dietlib-$(DIETLIB_VERSION)-$(ARM_ABI)-$(DIETLIBC_OPT_LEVEL)

# Static libraries used
ARM_LIBGCC_A=$(ARM_LIBGCC_PATH)/libgcc.a
NEWLIB_LIBM_A=$(NEWLIB_PATH)/libm.a
NEWLIB_LIBC_A=$(NEWLIB_PATH)/libc.a
DIETLIBC_A=$(DIETLIBC_PATH)/dietlibc.a

ML_LIBC = dietlibc.a newlib-libc.a newlib-libm.a gcc-libgcc.a

CROSS_COMPILE=$(ARM_BINPATH)/arm-$(ARM_ABI)

ifeq ($(OS),Windows_NT)
CC=$(CROSS_COMPILE)gcc$(GCC_VERSION).exe
else
CC=$(CROSS_COMPILE)/$(GCC_VERSION)
endif

OBJCOPY=$(CROSS_COMPILE)objcopy
OBJDUMP=$(CROSS_COMPILE)objdump
AR=$(CROSS_COMPILE)ar
RANLIB=$(CROSS_COMPILE)ranlib
READELF=$(CROSS_COMPILE)readelf
LD=$(CROSS_COMPILE)ld
STRIP=$(CROSS_COMPILE)strip

#
# Host compiler settings
#
HOST_CC=$(shell which gcc)
HOST_LD=$(shell which ld)
HOST_AR=$(shell which ar)

# You can customize CFLAG here
HOST_CFLAGS=-g -O3 -W -Wall -fms-extensions -std=c99
HOST_LFLAGS=
HOST_LIBS=

# large file support
# you can also get them with $(shell getconf LFS_CFLAGS)
HOST_LFS_FLAGS=-DLARGEFILES -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64


#
# mingw cross compiler settings
#
MINGW=i686-w64-mingw32
MINGW_GCC=$(MINGW)-gcc
MINGW_AR=$(MINGW)-ar

MINGW_CFLAGS=-g -O3 -W -Wall -fms-extensions -std=c99 -m32
MINGW_LFLAGS=
MINGW_LIBS=
MINGW_LFS_FLAGS=-DLARGEFILES -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64

#
# Additional binaries
#
CCACHE=ccache
GREP=grep
AWK=awk
PYTHON=python2
RST2LATEX=rst2latex.py

# Naming convention for Magic Lantern builds:
# General rules:
# - Always specify the camera and its firmware version number in the build name (e.g. 550d.fw109)
# - For non-release builds, specify the build date and author's (nick)name.
# - For experimental builds, add a short keyword indicating the particular feature tested.

# Examples for experimental builds:
# magiclantern-2010dec07.550d.fw108.cropmarks.a1ex.zip
# magiclantern-2010nov23.550d.fw108.selectable-audio.piers.zip

# Example for pre-release builds:
# magiclantern-2010dec17.550d.fw109.PRERELEASE.alex.zip

# Release builds:
# magiclantern-0.2.0.rc1.550d.fw109.zip
#~ VERSION=0.2.0.rc1.550d.fw109
BUILDVER=$(shell whoami).$(shell hg id -i -r .)
VERSION:=Nightly.$(shell LC_TIME=EN date +'%Y%b%d').$(MODEL)$(FW_VERSION)

# Build configuration - untested and debug stuff handy for devs
CONFIG_PTP          = n
CONFIG_PTP_CHDK     = n
CONFIG_PTP_ML       = n
ifndef CONFIG_GDB
CONFIG_GDB          = n
endif
CONFIG_GDBSTUB      = n
ifndef CONFIG_CONSOLE
CONFIG_CONSOLE      = y
endif
CONFIG_DEBUGMSG     = 0
CONFIG_CCACHE       = n
CONFIG_TCC          = y
CONFIG_MODULES      = y
CONFIG_TINYPY       = n

# Work in progress - would be nice to run the unmodified autoexec.bin in QEMU, but we are not there yet
# so, for now, we'll just hack the source code to work around the limitations of the emulator
CONFIG_QEMU         = n
CONFIG_QEMU_MENU_SCREENSHOTS = n

# Work in progress - load ML as position-independent code (PIC)
CONFIG_PIC          = n


I hope you can help me. Thanks in advance!
m1k6