Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - menoc

Pages: [1]
1
Share Your Videos / 50D and Magic Lantern - Documentary
« on: July 18, 2016, 04:58:14 PM »
Here's a little documentary I did for my artist friend about a group of artists out of Fort Lauderdale, Florida. The Doc was shot with a Canon 50D in RAW mode. Audio was done with a shotgun mic. Syncing was done with a slate and synced manually in post.



2
General Development Discussion / Help Compiling ML Unified
« on: April 26, 2013, 04:42:49 PM »
Can anyone help me with configuring the make file for compiling ML unified? I'm running Yagarto 4.7.2 on a Macbook Pro running OSX 10.8.3. Using MacHg 0.9.25 - Mercurial SCM 1.9.2. The result is a 61KB autoexec.bin file.

Here is my make file configuration and the output of make command in terminal.

Make File:

Code: [Select]
ARM_PATH=~/yagarto/yagarto-4.7.2/bin
CC=$(ARM_PATH)/arm-none-eabi-gcc-4.7.2
OBJCOPY=$(ARM_PATH)/arm-none-eabi-objcopy
AR=$(ARM_PATH)/arm-none-eabi-ar
RANLIB=$(ARM_PATH)/arm-none-eabi-ranlib
LD=$(CC)
HOST_CC=gcc
HOST_CFLAGS=-g -O3 -W -Wall
VERSION=0.1.9

all: magiclantern.fir


CONFIG_PYMITE = n
CONFIG_RELOC = n
CONFIG_TIMECODE = n
CONFIG_LUA = n

# 5D memory map
# RESTARTSTART is selected to be just above the end of the bss
#
ROMBASEADDR = 0xFF810000
RESTARTSTART = 0x00050000

# Firmware file IDs
FIRMWARE_ID_5D = 0x80000218
FIRMWARE_ID_7D = 0x80000250
FIRMWARE_ID = $(FIRMWARE_ID_5D)

# PyMite scripting paths
PYMITE_PATH = $(HOME)/build/pymite-08
PYMITE_LIB = $(PYMITE_PATH)/src/vm/libpmvm_dryos.a
PYMITE_CFLAGS = \
-I$(PYMITE_PATH)/src/vm \
-I$(PYMITE_PATH)/src/platform/dryos \

# Lua includes and libraries
LUA_PATH = ./lua
LUA_LIB = $(LUA_PATH)/liblua.a
LUA_CFLAGS = -I$(LUA_PATH)

ifeq ($(CONFIG_LUA),y)
include $(LUA_PATH)/Makefile
endif

CF_CARD="/Volumes/EOS_DIGITAL"

#
# Install a normal firmware file to the CF card.
#
install: magiclantern.fir magiclantern.cfg cropmarks.bmp autoexec.bin test.pym
cp $^ $(CF_CARD)
hdiutil unmount $(CF_CARD)

zip: magiclantern-$(VERSION).zip

# zip.txt must be the first item on the list!
magiclantern-$(VERSION).zip: \
zip.txt \
magiclantern.fir \
magiclantern.cfg \
cropmarks.bmp \
autoexec.bin \
README \

-rm $@
zip -z $@ < $^


FLAGS=\
-Wp,-MMD,$(dir $@).$(notdir $@).d \
-Wp,-MT,$@ \
-nostdlib \
-fomit-frame-pointer \
-fno-strict-aliasing \
-DCONFIG_MAGICLANTERN=1 \
-DRESTARTSTART=$(RESTARTSTART) \
-DROMBASEADDR=$(ROMBASEADDR) \
-DVERSION=\"$(VERSION)\" \


CFLAGS=\
$(FLAGS) \
-g \
-O3 \
-Wall \
-W \
-Wno-unused-parameter \
-mlong-calls \
-D__ARM__ \

ifeq ($(CONFIG_PYMITE),y)
CFLAGS += $(PYMITE_CFLAGS)
endif

ifeq ($(CONFIG_LUA),y)
CFLAGS += $(LUA_CFLAGS)
endif

NOT_USED_FLAGS=\
-msoft-float \

AFLAGS=\
$(FLAGS) \


%.s: %.c
$(call build,CC -S,$(CC) $(CFLAGS) -S -o $@ $<)
%.o: %.c
$(call build,CC,$(CC) $(CFLAGS) -c -o $@ $<)
%.i: %.c
$(call build,CPP,$(CC) $(CFLAGS) -E -c -o $@ $<)
%: %.c
$(call build,LD,$(CC) $(CFLAGS) -o $@ $<)
%.o: %.S
$(call build,AS,$(CC) $(AFLAGS) -c -o $@ $<)
%.bin: %
$(call build,OBJCOPY,$(OBJCOPY) -O binary $< $@)

dumper: dumper_entry.o dumper.o
$(call build,LD,$(LD) \
-o $@ \
-nostdlib \
-e _start \
$^ \
)

test: test.o
$(call build,LD,$(LD) \
-o $@ \
-nostdlib \
-mthumb-interwork \
-march=armv5te \
-e _start \
$^ \
)

dumper_entry.o: flasher-stubs.S

reboot.o: reboot.c magiclantern.bin

magiclantern.lds: magiclantern.lds.S
$(call build,CPP,$(CPP) $(CFLAGS) $< | grep -v '^#' > $@)

# magiclantern.lds script MUST be first
# entry.o MUST be second
# menu.o and debug.o must come before the modules
ML_OBJS-y = \
magiclantern.lds \
entry.o \
init.o \
stubs-5d2.208.o \
version.o \
stdio.o \
config.o \
debug.o \
menu.o \
property.o \
font-med.o \
font-small.o \
gui.o \
bootflags.o \
bmp.o \
focus.o \
lens.o \
spotmeter.o \
audio.o \
zebra.o \
hotplug.o \
ptp.o \
bracket.o \

ML_OBJS-$(CONFIG_PYMITE) += \
script.o \
pymite-plat.o \
pymite-nat.o \
pymite-img.o \
$(PYMITE_LIB) \

ML_OBJS-$(CONFIG_LUA) += \
lua-glue.o \
$(LUA_LIB) \

ML_OBJS-$(CONFIG_RELOC) += \
liveview.o \
reloc.o \

ML_OBJS-$(CONFIG_TIMECODE) += \
timecode.o \

# Extract the stdio files that we need
STDIO_OBJ = \
lib_a-setjmp.o \
lib_a-strchr.o \
lib_a-strrchr.o \
lib_a-strlen.o \
lib_a-strcat.o \
lib_a-strncat.o \
lib_a-strcmp.o \
lib_a-strncmp.o \
lib_a-strncpy.o \
lib_a-strstr.o \
lib_a-strcspn.o \
lib_a-memcmp.o \
lib_a-strcoll.o \
lib_a-ctype_.o \

ARM_LIBC_A = ~/yagarto/yagarto-4.7.2/arm-none-eabi/lib/libc.a

$(STDIO_OBJ): $(ARM_LIBC_A)
$(AR) xv $? $(STDIO_OBJ)
libstdio.a: $(STDIO_OBJ)
$(AR) cr $@ $^


magiclantern: $(ML_OBJS-y) libstdio.a
$(call build,LD,$(LD) \
-o $@ \
-N \
-nostdlib \
-T \
$^ \
-lm \
-lgcc \
)

# These do not need to be run.  Since bigtext is not
# a standard program, the output files are checked in.
font-huge.in: generate-font
$(call build,'GENFONT',./$< > $@ \
'-*-helvetica-*-r-*-*-72-*-100-100-*-*-iso8859-*' \
40 66 \
)
font-large.in: generate-font
$(call build,'GENFONT',./$< > $@ \
'-*-helvetica-*-r-*-*-34-*-100-100-*-*-iso8859-*' \
19 25 \
)
font-med.in: generate-font
$(call build,'GENFONT',./$< > $@ \
'-*-helvetica-*-r-*-*-17-*-100-100-*-*-iso8859-*' \
10 16 \
)
font-small.in: generate-font
$(call build,'GENFONT',./$< > $@ \
'-*-helvetica-*-r-*-*-10-*-100-100-*-*-iso8859-*' \
6 8 \
)

font-huge.c: font-huge.in mkfont
$(call build,MKFONT,./mkfont \
< $< \
> $@ \
-width 60 \
-height 70 \
-name font_huge \
)

font-large.c: font-large.in mkfont
$(call build,MKFONT,./mkfont \
< $< \
> $@ \
-width 28 \
-height 32 \
-name font_large \
)

font-med.c: font-med.in mkfont
$(call build,MKFONT,./mkfont \
< $< \
> $@ \
-width 12 \
-height 16 \
-name font_med \
)

font-small.c: font-small.in mkfont
$(call build,MKFONT,./mkfont \
< $< \
> $@ \
-width 8 \
-height 12 \
-name font_small \
)

version.c: FORCE
$(call build,VERSION,( \
echo 'const char build_version[] = "$(VERSION)";' ; \
echo 'const char build_id[] = "'`hg id`'";' ; \
echo 'const char build_date[] ="'`date -u "+%Y-%m-%d %H:%M:%S"`'";' ; \
echo 'const char build_user[] = "'`whoami`@`hostname`'";' ; \
) > $@)

autoexec: reboot.o
$(call build,LD,$(LD) \
-o $@ \
-nostdlib \
-mthumb-interwork \
-march=armv5te \
-e _start \
-Ttext=0x800000 \
$^ \
)

%-stubs.S: %.map
perl -ne > $@ < $< '\
BEGIN { print "#define SYM(a,n) n=a; .global n;\n" } \
s/[\r\n]//g; \
s/^\s*0001:([0-9A-Fa-f]+)\s+([^\s]+)$$/SYM(0x\1,\2)\n/ \
and print; \
'


%.dis: %.bin
$(ARM_PATH)/arm-linux-objdump \
-b binary \
-m arm \
-D \
$< \
> $@

BASE=0xFF800000
#BASE=0
#BASE=0xFF000000

1.1.0/ROM0.elf: 1.1.0/ROM0.bin 1.1.0/ROM0.map
./remake-elf \
--base $(BASE) \
--cc $(CC) \
--relative \
-o $@ \
$^


strings: ROM0.bin
strings -t x $^

ROM0.bin: FORCE
FORCE:


#
# Fetch the firmware archive from the Canon website
# and unpack it to generate the pristine firmware image.
#
eos5d2107.exe:
wget http://web.canon.jp/imaging/eosd/firm-e/eos5dmk2/data/eos5d2107.exe
eos7d109.exe:
wget http://aux1.jp.canon.com/eosd/firm-e/eos7d/data/eos7d109.exe

5d200107.fir: eos5d2107.exe
-unzip -o $< $@
touch $@

# Extract the flasher binary file from the firmware image
# and generate an ELF from it for analysis.

ifdef FETCH_FROM_CANON
%.1.flasher.bin: %.fir dissect_fw
./dissect_fw $< . $(basename $<)
endif

flasher.elf: 5d200107.1.flasher.bin flasher.map
./remake-elf \
--cc $(CC) \
--base 0x800120 \
-o $@ \
$^

dumper.elf: 5d2_dump.fir flasher.map
./remake-elf \
--cc $(CC) \
--base 0x800000 \
-o $@ \
$^

#
# Generate a new firmware image suitable for dumping the ROM images
#
5d2_dumper.fir: dumper.bin 5d200107.1.flasher.bin
./assemble_fw \
--output $@ \
--user $< \
--offset 0x5ab8 \
--id $(FIRMWARE_ID) \

magiclantern.fir: autoexec.bin
$(call build,ASSEMBLE,./assemble_fw \
--output $@ \
--user $< \
--offset 0x120 \
--flasher empty.bin \
--id $(FIRMWARE_ID) \
--zero \
)

dummy_data_head.bin:
perl -e 'print chr(0) x 24' > $@

#ROM0.bin: 5d200107.fir

# Use the dump_toolkit files
# deprectated; use the dumper.c program instead
5d2_dump.fir:
-rm $@
cat \
5d200107.0.header.bin \
5d200107.1.flasher.bin \
dump_toolkit/repack/dummy_data_head.bin \
> $@
./patch-bin $@ < dump_toolkit/diffs/5d2_dump.diff


# Firmware manipulation tools
dissect_fw: dissect_fw.c
$(HOST_CC) $(HOST_CFLAGS) -o $@ $<


#
# Embedded Python scripting
#
SCRIPTS=\
main.py \

# $(PYMITE_PATH)/src/tools/pmImgCreator.py \

pymite-nat.c pymite-img.c: $(SCRIPTS)
$(call build,PYMITE,\
./pymite-compile \
-c \
-u \
-o pymite-img.c \
--native-file=pymite-nat.c \
$^ \
)

%.pym: %.py
$(call build,PYMITE,\
./pymite-compile \
-b \
-u \
-o $@ \
$^ \
)

# Quiet the build process
build = \
@if [ "$V" == 1 ]; then \
echo '$2'; \
else \
printf "[ %-8s ]   %s\n"  $1 $@; \
fi; \
$2


clean:
-$(RM) \
*.o \
*.a \
.*.d \
font-*.c \
magiclantern.lds \
$(LUA_PATH)/*.o \
$(LUA_PATH)/.*.d \

-include .*.d


Make output:

Code: [Select]
1671-712-MBP:Magic-Lantern-Unified lanadministrator$ make clean
rm -f \
*.o \
*.a \
.*.d \
font-*.c \
magiclantern.lds \
./lua/*.o \
./lua/.*.d \

1671-712-MBP:Magic-Lantern-Unified lanadministrator$ make
[ CPP      ]   magiclantern.lds
[ AS       ]   entry.o
[ CC       ]   init.o
[ AS       ]   stubs-5d2.208.o
[ VERSION  ]   version.c
/bin/sh: hg: command not found
[ CC       ]   version.o
[ CC       ]   stdio.o
stdio.c: In function 'realloc':
stdio.c:277:15: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
[ CC       ]   config.o
[ CC       ]   debug.o
debug.c: In function 'call_setprintmovielog':
debug.c:169:2: warning: format '%d' expects argument of type 'int', but argument 7 has type 'int32_t' [-Wformat]
debug.c:187:2: warning: format '%d' expects argument of type 'int', but argument 5 has type 'int32_t' [-Wformat]
debug.c:187:2: warning: format '%d' expects argument of type 'int', but argument 6 has type 'int32_t' [-Wformat]
debug.c:196:2: warning: format '%d' expects argument of type 'int', but argument 5 has type 'int32_t' [-Wformat]
debug.c:196:2: warning: format '%d' expects argument of type 'int', but argument 6 has type 'int32_t' [-Wformat]
debug.c:196:2: warning: format '%d' expects argument of type 'int', but argument 7 has type 'int32_t' [-Wformat]
debug.c:196:2: warning: format '%d' expects argument of type 'int', but argument 8 has type 'int32_t' [-Wformat]
debug.c:196:2: warning: format '%d' expects argument of type 'int', but argument 9 has type 'int32_t' [-Wformat]
debug.c:201:2: warning: format '%d' expects argument of type 'int', but argument 5 has type 'int32_t' [-Wformat]
debug.c:201:2: warning: format '%d' expects argument of type 'int', but argument 6 has type 'int32_t' [-Wformat]
debug.c:206:2: warning: format '%d' expects argument of type 'int', but argument 5 has type 'int32_t' [-Wformat]
debug.c:206:2: warning: format '%d' expects argument of type 'int', but argument 6 has type 'int32_t' [-Wformat]
debug.c:159:13: warning: unused variable 'div' [-Wunused-variable]
debug.c:158:9: warning: unused variable 'mvrSetQScale' [-Wunused-variable]
debug.c:157:9: warning: unused variable 'mvrFixQScale' [-Wunused-variable]
debug.c:156:9: warning: unused variable 'mvrSetBitRate' [-Wunused-variable]
debug.c:155:10: warning: unused variable 'bps' [-Wunused-variable]
debug.c: In function 'efic_temp_display':
debug.c:249:2: warning: format '%d' expects argument of type 'int', but argument 5 has type 'uint32_t' [-Wformat]
debug.c: At top level:
debug.c:351:3: warning: initialization from incompatible pointer type [enabled by default]
debug.c:351:3: warning: (near initialization for 'debug_menus[4].select') [enabled by default]
debug.c: In function 'debug_property_handler':
debug.c:433:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'long unsigned int' [-Wformat]
debug.c:433:2: warning: format '%x' expects argument of type 'unsigned int', but argument 8 has type 'long unsigned int' [-Wformat]
debug.c:433:2: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'long unsigned int' [-Wformat]
debug.c:433:2: warning: format '%x' expects argument of type 'unsigned int', but argument 10 has type 'long unsigned int' [-Wformat]
debug.c:433:2: warning: format '%x' expects argument of type 'unsigned int', but argument 11 has type 'long unsigned int' [-Wformat]
debug.c:433:2: warning: format '%x' expects argument of type 'unsigned int', but argument 12 has type 'long unsigned int' [-Wformat]
debug.c: At top level:
debug.c:606:1: warning: initialization from incompatible pointer type [enabled by default]
debug.c:606:1: warning: (near initialization for 'task_create_movie_start.entry') [enabled by default]
[ CC       ]   menu.o
menu.c: In function 'menu_handler':
menu.c:516:2: warning: case value '1' not in enumerated type 'gui_event_t' [-Wswitch]
menu.c:520:2: warning: case value '268435590' not in enumerated type 'gui_event_t' [-Wswitch]
[ CC       ]   property.o
[ MKFONT   ]   font-med.c
[ CC       ]   font-med.o
[ MKFONT   ]   font-small.c
[ CC       ]   font-small.o
[ CC       ]   gui.o
[ CC       ]   bootflags.o
[ CC       ]   bmp.o
[ CC       ]   focus.o
[ CC       ]   lens.o
[ CC       ]   spotmeter.o
[ CC       ]   audio.o
[ CC       ]   zebra.o
[ CC       ]   hotplug.o
[ CC       ]   ptp.o
[ CC       ]   bracket.o
~/yagarto/yagarto-4.7.2/bin/arm-none-eabi-ar xv /Users/lanadministrator/yagarto/yagarto-4.7.2/arm-none-eabi/lib/libc.a lib_a-setjmp.o lib_a-strchr.o lib_a-strrchr.o lib_a-strlen.o lib_a-strcat.o lib_a-strncat.o lib_a-strcmp.o lib_a-strncmp.o lib_a-strncpy.o lib_a-strstr.o lib_a-strcspn.o lib_a-memcmp.o lib_a-strcoll.o lib_a-ctype_.o
x - lib_a-setjmp.o
x - lib_a-strchr.o
x - lib_a-strrchr.o
x - lib_a-strlen.o
x - lib_a-strcat.o
x - lib_a-strncat.o
x - lib_a-strcmp.o
x - lib_a-strncmp.o
x - lib_a-strncpy.o
x - lib_a-strstr.o
x - lib_a-strcspn.o
x - lib_a-memcmp.o
x - lib_a-strcoll.o
x - lib_a-ctype_.o
~/yagarto/yagarto-4.7.2/bin/arm-none-eabi-ar cr libstdio.a lib_a-setjmp.o lib_a-strchr.o lib_a-strrchr.o lib_a-strlen.o lib_a-strcat.o lib_a-strncat.o lib_a-strcmp.o lib_a-strncmp.o lib_a-strncpy.o lib_a-strstr.o lib_a-strcspn.o lib_a-memcmp.o lib_a-strcoll.o lib_a-ctype_.o
[ LD       ]   magiclantern
[ OBJCOPY  ]   magiclantern.bin
[ CC       ]   reboot.o
[ LD       ]   autoexec
[ OBJCOPY  ]   autoexec.bin
[ ASSEMBLE ]   magiclantern.fir
magiclantern.fir: New CRC: ffffffffffb69d36 OLD b7932bae
1671-712-MBP:Magic-Lantern-Unified lanadministrator$

3
General Chat / Advice on the GoPro Hero 3 Black Edition
« on: January 24, 2013, 01:40:23 AM »
Hey, does anybody has or have any experience with the GoPro Hero 3 black edition? How has it worked for you?

I have been reading the reviews on Amazon and they are horrid! I want to get several of these little cameras but I'm very taking aback by the negative reviews it's getting. I'm not sure if I should get one!!

I'd rather hear some opinions from you guys . . . not that they might be any different . . .

4
Hardware and Accessories / HELP! 5D Mark III or 5D Mark II
« on: January 24, 2013, 01:15:26 AM »
OK,  I've got some spending money that I intend to invest on a new Camera - courtesy of Uncle Sam.

Basically I'm torn between getting the 5DM3 (Expensive!) or the 5DM2 (older but more affordable). I've read some reviews on the 5DM3. Some basically paint it as nothing more than a slightly upgraded 5DM2. In fact many say that the image quality of the two cameras is the same except for improved noise in low light for the 5DM3. More so, the biggest problems that plagued the 5DMarkII - moire and aliasing, can be fixed with the VAF-5D2b filter. Rolling shutter can now also be handled in post with the After Effects Rolling Shutter Repair effect. So the question is; is it worth it to fork out so much more money for the 5DM3, when you can get a comparable-quality 5DMK2? Not to mention the fact that with the money I would save I could get a better lens than the basic 50mm I would get with the 5DM3. Another big concern I have is that it is rumored that a canon 2k or 4k DSLR is around the corner!!! So I don't want to be left out of 2K.

What do you guys think?

Should I get the MarkIII or get a MarkII, fix the issues, and wait for a 2K or 4K DSLR?

5
 :-\ I installed the December 1st nightly build but now Global Draw does not work properly - the bottom status bar is now covered by part of the camera's Live View. Has anyone come across this issue? Does anyone know which was the last build where Global Draw was still working on the 50D?

6
Guys, Canon just announced a firmware update for the 5DMIII - uncompressed 8-bit, 4.2.2 HDMI out. It will be out April 2013. I believe this is great for us filmakers. What I'll like to know is if this in any way could be leveraged by ML to port to other cameras such as the 7D r 60D?

http://www.usa.canon.com/cusa/about_canon?pageKeyCode=pressreldetail&docId=0901e024806daf9c&WT.mc_id=EM1210EO10001&RID=1-84W4HH&CON=1-OM7-781&PRO=&CID=1-84QKOL

Any thoughts on this anyone?

7
Shoot preparation / EOS Utility on OSX 10.8 workaround
« on: October 06, 2012, 09:17:05 PM »
Just in case you guys cannot wait til Canon updates it's software suite - If you have a Mac running OSX 10.8 Mountain Lion, Canon EOS Utility is broken. The workaround is to install an older version of the software. EOS Utility V2.10.4 works pretty well with Mountain Lion. I have tested it with my MacBook Pro running Mountain Lion with all the latest updates applied. All features work. Basically, to install, first delete the entire "EOS Utility" sub-folder found in the "Canon Utilities" folder in Applications. Decompress the downloaded zip, mount the image file and run the install. It should work.

You can download EOS Utility V2.10.4 here:
http://mac.softpedia.com/get/Multimedia/EOS-Utility.shtml

8
General Help Q&A / EOS Utility on OSX 10.8 workaround
« on: October 06, 2012, 09:09:32 PM »
Just in case you guys cannot wait til Canon updates it's software suite - If you have a Mac running OSX 10.8 Mountain Lion, Canon EOS Utility is broken. The workaround is to install an older version of the software. EOS Utility V2.10.4 works pretty well with Mountain Lion. I have tested it with my MacBook Pro running Mountain Lion with all the latest updates applied. All features work. Basically, to install, first delete the entire "EOS Utility" sub-folder found in the "Canon Utilities" folder in Applications. Decompress the downloaded zip, mount the image file and run the install. It should work.

You can download EOS Utility V2.10.4 here:
http://mac.softpedia.com/get/Multimedia/EOS-Utility.shtml

9
Hardware and Accessories / TSCAM DR-40 Noise
« on: August 29, 2012, 11:15:41 PM »
Hi guys,

Recently I bought a tascam DR-40 field recorder to use with my 50D running magic lantern. The DR-40 works pretty well with the internal mics (very little noise), but when I connect an external mic (and I have tried several different good quality mics - with and without phantom power), there is a lot of noise present ( there's a very present sound hiss as well as athe a tic of the LCD screen as it changes characters on the display. I was wondering if anyone else has had the same experience with this recorder? I'm seriously thinking about returning it and getting a different model.

10
Share Your Videos / Fort Lauderdale - Shot with the 50D
« on: July 17, 2012, 01:11:41 PM »

Camera: All scenes recorded with the Canon EOS 50D Running Majic Lantern
Bit Rate: 3.0x at ISO 20, 80, 100, 400
Media: CF Card 600x
Lenses: Canon EF-S 18-200mm F3.5-5.6 IS and Minolta 50mm F1.8 Prime
Audio: No on location audio. All audio mixed from music beds
Music: Music By Tom Fahy (http://tomfahy.org)
Edit: Final cut Pro 7

Edit by Nanomad: you just need the vimeo url between the tags, like this
Code: [Select]
[vimeo]http://vimeo.com/45889719[/vimeo]

Pages: [1]