Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - tabbynoodles

Pages: [1]
1
Camera Emergency Department / Re: EOS M - Bricked, showing Err 70
« on: October 21, 2021, 05:38:34 PM »
Alright thanks. I've posted a comment into the thread

2
Camera Emergency Department / EOS M - Bricked, showing Err 70
« on: October 20, 2021, 02:22:51 PM »
I got the same issue from a thread here and I am using the latest @Danne EOSM build crop_rec_4k_mlv_snd_raw_only_2021Jun26.EOSM202 before this happens. The issue happens after I change to different crop modes. Also I've tried the diagnostic tools and it works just fine, the log provided below.

when the card is in the camera
- green will blink few times like during a normal power up but the screen will never get powered, connecting an external monitor would show no signal
- connecting the camera to PC via cable does not work at all

when the card is not in the camera
- green will blink indefinitely and screen will power up but show nothing on it, connecting an external monitor shows current mode --- or --- Err 70 will be displayed
- connecting the camera to PC via cable works as intended but EOS Utility can't perform firmware update as it needs card in the camera

Portable Display Test Log
Code: [Select]
  Magic Lantern Rescue
 ----------------------------
 - Model ID: 0x331 M
 - Camera model: ???
 - Firmware version: 2.0.2 / 9.9.8 B8(3a)
 - IMG naming: 100?????/IMG_1333.JPG
 - User PS: CineStyle CineBooster LightForm C
 - Boot flags: FIR=0 BOOT=-1 RAM=-1 UPD=-1
 - ROMBASEADDR: 0xFF0C0000
 - DONE!


Rom Dumper Log:
Code: [Select]
  Magic Lantern Rescue
 ----------------------------
 - Model ID: 0x331 M
 - Camera model: ???
 - Firmware version: 2.0.2 / 9.9.8 B8(3a)
 - IMG naming: 100?????/IMG_1333.JPG
 - User PS: CineStyle CineBooster LightForm C
 - Boot flags: FIR=0 BOOT=-1 RAM=-1 UPD=-1
 - ROMBASEADDR: 0xFF0C0000
 - card_bootflags 10a63c
 - boot_read/write_sector 10aec8 10afbc
 - 102798 Card init => 2
 - Dumping ROM0... 100%
 - MD5: 00fb35d35a716ad9341967fd5d54aab8
 - Dumping ROM1... 100%
 - MD5: 81ed458721f0b56f41ff5b6aac98727a
 - 0: \n**** SROM(SIO%d) Menu ****\n
 - 107c64: \n**** SROM Menu ****\n
 - 107B4C: tag c022c000
 - sf_init 107B48
 - 10717c: Read Address[0x%06x-0x%06x]:0x
 - 106A94: tag c0820000
 - sf_command_sio 106A44
 - Reading serial flash... 100%
 - Writing SFDATA.BIN... 100%
 - MD5: d38b362303c1d32873c766ebc06b7611
 - Saving RESCUE.LOG ...

He had autoexec.bin fix by @a1ex mentioned by @Danne but I can't find it here in the forum

3
Camera Emergency Department / Re: Canon EOS M Bricked!
« on: October 20, 2021, 01:47:56 PM »
I got the same issue Err 70 without the card. I've used the last build of @Danne EOSM crop_rec_4k_mlv_snd_raw_only_2021Jun26.EOSM202.zip, did the autoexec.bin rom dumper and it dumps successfully

Portable Display Test Log
Code: [Select]
  Magic Lantern Rescue
 ----------------------------
 - Model ID: 0x331 M
 - Camera model: ???
 - Firmware version: 2.0.2 / 9.9.8 B8(3a)
 - IMG naming: 100?????/IMG_1333.JPG
 - User PS: CineStyle CineBooster LightForm C
 - Boot flags: FIR=0 BOOT=-1 RAM=-1 UPD=-1
 - ROMBASEADDR: 0xFF0C0000
 - DONE!

Rom Dumper Log:
Code: [Select]
  Magic Lantern Rescue
 ----------------------------
 - Model ID: 0x331 M
 - Camera model: ???
 - Firmware version: 2.0.2 / 9.9.8 B8(3a)
 - IMG naming: 100?????/IMG_1333.JPG
 - User PS: CineStyle CineBooster LightForm C
 - Boot flags: FIR=0 BOOT=-1 RAM=-1 UPD=-1
 - ROMBASEADDR: 0xFF0C0000
 - card_bootflags 10a63c
 - boot_read/write_sector 10aec8 10afbc
 - 102798 Card init => 2
 - Dumping ROM0... 100%
 - MD5: 00fb35d35a716ad9341967fd5d54aab8
 - Dumping ROM1... 100%
 - MD5: 81ed458721f0b56f41ff5b6aac98727a
 - 0: \n**** SROM(SIO%d) Menu ****\n
 - 107c64: \n**** SROM Menu ****\n
 - 107B4C: tag c022c000
 - sf_init 107B48
 - 10717c: Read Address[0x%06x-0x%06x]:0x
 - 106A94: tag c0820000
 - sf_command_sio 106A44
 - Reading serial flash... 100%
 - Writing SFDATA.BIN... 100%
 - MD5: d38b362303c1d32873c766ebc06b7611
 - Saving RESCUE.LOG ...

Pages: [1]