Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tobiasBora

#1
@kitor: ok thanks for the precision! So I tried to get the ROM dumps, and they run fine in qemu (thanks names_are_hard!). So I guess it's a hardware issue...

I tried to open the LCD case+the pivot axis case, but I can't find any obvious broken wire... So I'm not sure yet if I should buy a new LCD screen (~30€ I think): I heard that LCD backlight can be broken due to a fuse on the mother board (and therefore changing the LCD screen would not solve the problem). But this is maybe out of the scope of this thread, so I created a new one there https://www.magiclantern.fm/forum/index.php?topic=26204.0 .
#2
Hello!

As I reported recently, the backlight of my 60D suddenly stopped working, and I got an error 70 (that I can bypass). I'm more and more confident that the issue is a hardware issue, however after trying to open the LCD case+remove the plastic around the screen pivot axis, I can't see anything obvious (no disconnected/broken cable).

I was planning to buy a new LCD screen, but I heard that the problem may be a broken fuse on the mother board... for that reason, I'd like to know if there is a way to check the LCD backlight, for instance by plugging some wires to a +5V current.

Any idea how I could test my LCD backlight, and potentially discover the failing point?

Thanks!
#3
@names_are_hard: Yes I know that Err 70 can be produced by a wide range of problems. I was hopping that the log could help experienced user to determine which ^^' I first got this error with ML, but I then tried to insert an empty SD card in it (without ML), I tried to start with "Set" key enabled, but I never tried to completely uninstall ML (I was thinking that ML could be useful to debug at some point). Do you think it makes sense to uninstall ML completely?

It may be a loose cable, I've no idea... Should I try to open the main LCD screen case following something like that https://www.youtube.com/watch?v=lEyrH3Nywz0
#4
My turn to try to solve the Error 70 on Canon 60D! My case seems to be a bit different (sorry if this is not appropriate for this thread): basically, for no apparent reason, my Canon 60D started to have this error 70 a few seconds after a boot (I see during 2 seconds the number of left images etc... on the small top LCD screen, then I've this error), and at the same time the backlight of my main LCD screen stopped working completely (using a lamp I can manage to see some stuff written on the screen and navigate into the menu, even if it's quite hard to read). However, I can still manage to take some pictures: I need to half-press during a few seconds the button which takes pictures, and the error usually disappears during a few seconds, giving me some time to focus & take the actual picture. However, it's highly not practical, and since I don't have any backlight, I can't checked the final photo I took.

I tried to reset (thanks my lamp!) the camera settings via the menu, but it does not change anything. I tried to use another SD card, and tried to format this other card using gparted. Same error.

ML does not gives me much error (most of the time, it does not even mention the error 70). On this log (coming from a file logXXX.log, I don't have any crash file), I just turned on the camera, observed the error 70 during maybe 2 seconds, and then I half-pressed the button to take a picture: the error was gone for about 1 second and appeared again (note that "nano" displays also an invisible char ^@ at the beginning of each line):


Fri Jul 30 09:21:23 2021
     0:    11.811 [STARTUP]
K287 ICU Firmware Version 1.1.1 ( 3.3.7 )
     1:    11.884 [STARTUP]
ICU Release DateTime 2012.05.14 13:18:25
     2:    12.231 [SEQ] CreateSequencer (Startup, Num = 6)
     3:    12.497 [SEQ] NotifyComplete (Cur = 0, 0x10000, Flag = 0x10000)
     4:    14.355 [SEQ] seqEventDispatch (Startup, 0)
     5:    14.387 [STARTUP] startupEntry
     6:    51.536 [PROPST] Initialize Adjective & Situation
     7:    51.874 [HPD] # 1 1 0
     8:    54.808 [PROPST] Clear Adjective & Situation (StartupCondition)
     9:    55.270 [PROPST] AEMode New:2 Last:0
    10:    55.356 [PROPST] Active Adjective & Situation
    11:    55.462 [PROPST] ReqChangeCBR : Adjective 0, 0
    12:    55.498 [PROPST] Not ExecMultiConvert Already None : Adjective 0, 0
    13:    55.565 [PROPST] Not ExecMultiConvert : Situation 0
    14:    55.623 [PROPST]  CurrentAdjective 0 0
    15:    56.430 [HPD] Variangle State 2
    16:    56.984 [HPD] CreateTask Master End
    17:    57.883 [SEQ] NotifyComplete (Cur = 1, 0x20000002, Flag = 0x2)
    18:    58.799 [PROPST] AEMode New:2 Last:2
    19:    59.532 [PRP] Deliv WaitID = 0x80000001, 0xFF1B8BF8(1)
    20:    60.390 [PRP] Complete WaitID = 0x80000001, 0xFF1B8BF8(0)
    21:    60.550 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 1034
    22:    61.486 [PRP] MovieParamData
    23:    61.674 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0xf zoom 0x0
    24:    65.093 [EM] emSlaveChangeCBR : AUTO_POWEROFF (1)
    25:    65.283 [EM] emSlaveChangeCBR : UILOCK (0x0)
    26:    65.772 [HPD] ERASE SW OFF
    27:    77.777 [PRP] Complete WaitID = 0x8000003F, 0x00000000(0)
    28:   112.534 [STARTUP] startupPropAdminMain : End
    29:   112.606 [SEQ] NotifyComplete (Cur = 1, 0x20000000, Flag = 0x20000000)
    30:   112.684 [SEQ] seqEventDispatch (Startup, 1)
    31:   112.711 [STARTUP] startupPrepareProperty
    32:   113.065 [FM] FM_Initialize (0, 1, 0)
    33:   113.426 [FM] fmResultCBR (0x80e2a8)
    34:   113.914 [FM] PROP_HDD_DCIM_PATH (/)
    35:   114.095 [FC] FC_Initialize [drive:3][ClassID:39]
    36:   114.297 [FM] PROP_CARD1_STATUS = 0x1
    37:   114.383 [FM] PROP_CARD1_FOLDER_NUMBER = 142
    38:   114.444 [FM] PROP_CARD1_FILE_NUMBER = 0
    39:   114.531 [FM] PROP_CARD2_STATUS = 0x0
    40:   114.596 [FM] PROP_CARD2_FOLDER_NUMBER = 100
    41:   114.655 [FM] PROP_CARD2_FILE_NUMBER = 5226
    42:   114.722 [FM] PROP_CARD3_EXIST = 0
    43:   114.759 [FM] PROP_CARD3_STATUS = 0x1
    44:   114.799 [FM] PROP_CARD3_RECORD = 0 => 1
    45:   114.839 [FM] PROP_CARD3_FOLDER_NUMBER = 100
    46:   114.884 [FM] PROP_CARD3_FILE_NUMBER = 0
    47:   114.940 [FM] PROP_FILE_NUMBERING_MODE = 1, 0
    48:   114.975 [FM] PROP_CARD_EXTENSION = 0
    49:   115.008 [FM] PROP_CURRENT_MEDIA = 2
    50:   115.038 [FM] PROP_USBDEVICE_CONNECT = -1
    51:   115.076 [FM] PROP_NUMBER_OF_CONTINUOUS_MODE = 5226
    52:   115.110 [SEQ] NotifyComplete (Cur = 2, 0x10, Flag = 0x10)
    53:   115.202 [FM] PROP_DSDEFINE ModelId 80000287
    54:   115.265 [SEQ] seqEventDispatch (Startup, 2)
    55:   115.287 [STARTUP] startupPrepareCapture
    56:   115.872 [RSC] hMemoryQueue (0x620010) hStorageQueue (0x640012)
    57:   117.186 [RSC] AllocateMemoryUnit For ExMem1
    58:   117.208 [RSC] AllocateMemoryUnit For ExMem1_2
    59:   117.226 [RSC] AllocateMemoryUnit For OnlyMem1
    60:   118.005 [RSC] MemMgr(IMAGE) 0 2
    61:   118.033 [RSC] MemMgr(IMAGE) 0 0
    62:   118.052 [RSC] MemMgr(IMAGE) 0 7
    63:   118.068 [RSC] MemMgr(IMAGE) 0 0
    64:   118.125 [RSC] PROP_MEMORY_STATUS(SELF) (0->)3 (OTHER) 3
    65:   118.141 [RSC] Deliver PROP_MEMORY_STATUS 3
    66:   118.627 [RSC] SRMExMem1_1State Event 0 Result State 0->6
    67:   118.659 [RSC] hExMem1_2StateObject Through Event 0 State 0
    68:   119.166 [RSC] SRMExMem1_1State Event 4 Result State 6->6
    69:   119.197 [RSC] hExMem1_2StateObject Through Event 4 State 0
    70:   119.918 [RSC] this->dwCardStatus[0] = 0x1(552)
    71:   120.567 [RSC] this->dwCardStatus[1] = 0x0(552)
    72:   121.204 [RSC] this->dwCardStatus[2] = 0x1(552)
    73:   121.833 [RSC] PROP_PC_HDD_STATUS = 0x1
    74:   122.700 [RSC] SRMExMem1_1State Event 4 Result State 6->6
    75:   122.734 [RSC] hExMem1_2StateObject Through Event 4 State 0
    76:   123.467 [RSC] SRMExMem1_1State Event 4 Result State 6->6
    77:   123.496 [RSC] hExMem1_2StateObject Through Event 4 State 0
    78:   124.229 [RSC] SRMExMem1_1State Event 4 Result State 6->6
    79:   124.264 [RSC] hExMem1_2StateObject Through Event 4 State 0
    80:   125.373 [RSC] SRMExMem1_1State Event 4 Result State 6->6
    81:   125.408 [RSC] hExMem1_2StateObject Through Event 4 State 0
    82:   126.049 [RSC] PC_STORAGE_SLOT STORAGE_NOT_EXIST
    83:   126.082 [RSC] PROP_SAVE_MODE = 0x1
    84:   126.306 [RSC] PROP_CARD0_FOLDER_NUMBER
    85:   126.493 [RSC] PROP_CARD1_FOLDER_NUMBER
    86:   126.664 [RSC] PROP_CARD2_FOLDER_NUMBER
    87:   127.196 [RSC] PROP_NUMBER_OF_CONTINUOUS_MODE BaseDcfNo 5226
    88:   128.311 [RSC] RearrangeMemMgr 0 1
    89:   129.400 [RSC] PROP_CARD_EXTENSION 0
    90:   130.726 [RSC] PC_CLUSTER_SIZE = 0x1000
    91:   131.143 [RSC] PROP_CFN_TAB2 ST_MEM_MAP_NORMAL->ST_MEM_MAP_NORMAL
    92:   131.207 [RSC] ClearBusy(0x1000) 0x40->0x40,0x0(0x40)[0,0]
    93:   131.549 [RSC] SetAutoIsoCode 0x70
    94:   131.587 [RSC] ChangeAutoIsoCode Factor:1 AutoIsoCode:112 -> 112
    95:   131.803 [RSC] SetAutoIsoCode 0x70
    96:   131.836 [RSC] ChangeAutoIsoCode Factor:2 AutoIsoCode:112 -> 112
    97:   132.213 [RSC] ClearBusy(0x40000) 0x40->0x40,0x0(0x40)[0,0]
    98:   132.452 [RSC] ClearBusy(0x40000) 0x40->0x40,0x0(0x40)[0,0]
    99:   132.668 [RSC] ClearBusy(0x40000) 0x40->0x40,0x0(0x40)[0,0]
   100:   132.855 [RSC] ClearBusy(0x40000) 0x40->0x40,0x0(0x40)[0,0]
   101:   133.014 [RSC] SetAutoIsoCode 0x70
   102:   133.039 [RSC] ChangeAutoIsoCode Factor:0 AutoIsoCode:112 -> 112
   103:   133.419 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 128
   104:   133.552 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 128
   105:   133.666 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 128
   106:   134.147 [RSC] SetBusy(0x10) 0x40->0x50,0x0(0x50)[0,0]
   107:   134.178 [RSC] RealSetBusy(0x10) 0x40->0x50,0x0(0x50)
   108:   134.448 [JOB] InitializeJobClass (ID = 16196, Num = 17)
   109:   134.635 [JOB] [BIND] dcsResultCBR (0x930ea8)
   110:   134.778 [JOB] PROP_CFN_TAB2 0 0
   111:   135.788 [CERES]  RegisterGPSInfoCallback
   112:   136.258 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
   113:   136.518 [RSC] SRMExMem1_1State Event 6 Result State 6->6
   114:   136.554 [RSC] hExMem1_2StateObject Through Event 6 State 0
   115:   137.166 [Burst0] 589823 4 44 44 16772618
   116:   137.597 [RSC] PROP_SAVE_MODE = 0x1
   117:   137.735 [Burst0] 589823 4 44 44 16772618
   118:   138.853 [JOB] InitializeInnerDevelopJobClass (ID = 16196, Num = 16)
   119:   138.884 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 10 )
   120:   140.068 [SND] Seq LPC 5-0
   121:   140.110 [SND]  HARB_ARBMODE  Before:0x00000000 Current:0x00000000
   122:   140.144 [SND]  HARB_HARBCTRL Before:0x002AEAA8 Current:0x002AEAA8
   123:   140.153 [SND] Seq LPC 5-1
   124:   140.208 [SND] Seq LPC 5-2
   125:   140.248 [SND] Seq LPC 5-3
   126:   140.294 [SND] Seq LPC 5-4
   127:   140.305 [SND] Seq LPC 5-5
   128:   140.316 [SND] Seq LPC 5-6
   129:   140.704 [SND] Seq LPC 5-7
   130:   140.719 [SND] Seq LPC fin
   131:   141.867 [SEQ] NotifyComplete (Cur = 3, 0xe0110, Flag = 0x40000)
   132:   142.076 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 147
   133:   142.257 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 147
   134:   142.421 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 147
   135:   142.575 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 147
   136:   142.715 [EM] emRegisterMulticastCallback : EventID = 5, ClassID = 147
   137:   142.879 [EM] emRegisterMulticastCallback : EventID = 6, ClassID = 147
   138:   143.006 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 147
   139:   143.144 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 147
   140:   143.278 [EM] emRegisterMulticastCallback : EventID = 8, ClassID = 147
   141:   143.424 [EM] emRegisterMulticastCallback : EventID = 9, ClassID = 147
   142:   143.566 [EM] emRegisterMulticastCallback : EventID = 10, ClassID = 147
   143:   143.703 [EM] emRegisterMulticastCallback : EventID = 17, ClassID = 147
   144:   143.887 [SHTC] scsInit
   145:   144.860 [ENG] [ENGIO](Addr:0x5c880000, Data:0x   30000)
   146:   150.948 [SEQ] NotifyComplete (Cur = 3, 0xa0110, Flag = 0x80000)
   147:   151.132 [SHTB] sbsInit
   148:   151.350 [SHTB] VShadingAddress:0x5c8c9960, Size:901120
   149:   152.068 [SHTP] spsInit
   150:   152.154 [FM] FM_RegisterSpaceNotifyCallback
   151:   152.278 [MRK] RegisterSpaceNotifyCallback : DriveNo = 2
   152:   152.310 [FM] voiRegisterSpaceNotifyCallback : DriveNo = 2
   153:   152.365 [FM] RegisterSpaceNotifyCallback : DriveNo = 2
   154:   152.398 [FC] FcmcRegisterSpaceNotifyCallback : DriveNo = 2
   155:   152.420 [FM] FM_RegisterSpaceNotifyCallback
   156:   152.668 [SEQ] NotifyComplete (Cur = 3, 0x20110, Flag = 0x100)
   157:   152.779 [WFT]  TOM_Initialize
   158:   154.063 [TERM] terminateChangeCBR : SHUTDOWN (255)
   159:   154.088 [TERMINATE] SHUTDOWN init comp
   160:   154.155 [TERM] terminateChangeCBR : AUTO_POWEROFF (1)
   161:   154.176 [TERMINATE] Abort init comp
   162:   154.343 [WFT]  PROP_WFT_IMAGE_TRANS (1)
   163:   155.651 [SHTC] Mem1Component Size=0x37a54
   164:   156.347 [SHTC] DarkcurAddress:0x5c9a5960, Size:131072
   165:   156.446 [SHTC] scsProperty ID=0x0(0x80)
   166:   156.500 [SHTC] scsProperty ID=0x80040004(0x0)
   167:   156.612 [RSC] ClearBusy(0x40) 0x50->0x10,0x0(0x10)[0,0]
   168:   157.143 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 158
   169:   157.302 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 158
   170:   157.427 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 158
   171:   158.741 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 167
   172:   158.890 [EM] emRegisterMulticastCallback : EventID = 11, ClassID = 167
   173:   158.920 [EM] Already SW1OFF
   174:   159.018 [MC] cam event metering timer start
   175:   159.130 [EM] emRegisterMulticastCallback : EventID = 7, ClassID = 167
   176:   159.239 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 167
   177:   159.344 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 167
   178:   159.491 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 167
   179:   159.625 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 167
   180:   159.729 [EM] emRegisterMulticastCallback : EventID = 18, ClassID = 131
   181:   159.832 [EM] emRegisterMulticastCallback : EventID = 19, ClassID = 131
   182:   160.252 [MC] PROP_DISPLAY_OFF_SENSOR : 1
   183:   160.389 [MC] DisplaySensor : 1(0)
   184:   160.842 [MC] PROP_GUI_STATE 0
   185:   160.989 [MC] PROP_LV_ACTION : LV_STOP
   186:   161.068 [MC] PROP_LV_DISPBUSY : not Busy
   187:   161.146 [MC] PROP_LV_LOCK : LVLOCK_PERMIT
   188:   161.229 [MC] PROP_DISABLE_PLAY_IMAGE : Enable Play
   189:   161.315 [MC] JobState 0
   190:   161.499 [RSC] ClearBusy(0x20000) 0x10->0x10,0x0(0x10)[0,0]
   191:   162.054 [MC] QRTime : 2
   192:   162.310 [DISP] WARN ForceBackLightOff before initialize !!
   193:   162.473 [MC] PROP_VARIANGLE_GUICTRL : Enable
   194:   162.682 [MC] GuiGroundState : 0
   195:   162.930 [MC] PROP_LV_ACTION : LV_STOP
   196:   163.188 [MC] PROP_VARIANGLE_GUICTRL : Disable
   197:   164.035 [MC] regist master CardCover
   198:   164.212 [EM] emRegisterMulticastCallback : EventID = 13, ClassID = 167
   199:   164.296 [TA10] TA10_Initialize : Start
   200:   165.722 [TA10] ta10_ChangePropCBR ShotsPlan 2 / TotalSheets 2
   201:   167.259 [TA10] TA10S_Initialize : Start
   202:   167.298 [TA10] TA10S_Initialize : CreateStageClass
   203:   167.530 [TA10] TA10S_Initialize : End
   204:   167.631 [TA10] TA10_Initialize : End
   205:   167.734 [FM] fmInitialized
   206:   167.801 [FC] _FC_SetDirSuffix (CANON)
   207:   167.856 [FC] _FC_SetConsecutiveMode (mode = 1, DCF = 5226)
   208:   167.937 [FM] fmPrepare
   209:   168.459 [WFT]  tomSetRawJpgMode (Type = 0x4)
   210:   169.468 [FM] ALV_Initialize (36, 25)
   211:   169.735 [FM] fmAllocDcfNo(0x80e064)(0x0)
   212:   169.927 [RSC] srmAllocDcfNoTable
   213:   169.974 [FM] fmAllocateDcfNoCompleteCallback(0x5c710000,0x4000)
   214:   170.263 [FM] fmAllocDcfNo : DcfNoTable(0x5c710000)
   215:   170.462 [SD] ---- SDEventHandler(ID=1:Event=8) ----
   216:   375.006 [SD] sdTrySendCommand1: Timeout
   217:   562.914 [SD] sdSendOCR: Hi-Capacity Card
   218:   564.130 [SD] sdSendOCR: Hi-Capacity Card
   219:   565.330 [SD] sdSendOCR: Hi-Capacity Card
   220:   566.508 [SD] sdSendOCR: Hi-Capacity Card
   221:   569.260 [SD] CsdStructVersion = 1
   222:   569.285 [SD] MMCSpecVersion = 0
   223:   569.319 [SD] C_SIZE=0x0001dbd3 READ_BL_LEN=0x0009
   224:   569.335 [SD] *** EraseBlks = 128 ***
   225:   569.367 [SD] CARD CAPACITY is 60906Mbyte( 124735488Sec )
   226:   570.475 [SD] sdSendCID: MID = 0x03, PDN = 0x5352
   227:   577.896 [SD] sdSendStatus: SD_CARD_TYPE_H  = 0x0000
   228:   577.917 [SD] sdSendStatus: SD_CARD_TYPE_L  = 0x0000
   229:   581.413 [SD] sdSendSCR: SCR=0x87844502, SpecVersion=2
   230:   587.375 [SD] sdSwitchFunction( 0 ) Status=0x80000003, AccessMode=3
   231:   588.013 [SD] Support Hi Speed Mode
   232:   593.928 [SD] sdSwitchFunction( 1 ) Status=0x80000003, AccessMode=3
   233:   594.634 [SD] nBlocks=124735488, blksPerTrack=0, nHeads=0
   234:   594.654 [SD] ERASE_TIMEOUT:1
   235:   594.664 [SD] ERASE_OFFSET:1
   236:   594.676 [SD] ERASE_SIZE:f
   237:   594.685 [SD] AU_SIZE:9
   238:   594.702 [SD] dwEraseSectorSize:128
   239:   594.719 [SD] dwEraseBlks:2000 CSD:1
   240:   594.743 [SD] SD_GetAccessMode=3
   241:   594.754 [SD] Set Hi-Speed Mode( 48MHz )
   242:   628.109 [FM] EV_INSERTION_COMPLETE : ID = 2, stat = 0
   243:   628.265 [FM] fmNormalMountCard (ID = 2, Ret = 0)
   244:   628.288 [FM] fmPrepareShooting (Drive = 2)
   245:   628.360 [FC] _FC_PrepareCatalog (2, B:)
   246:   629.700 [SD] ---- SDEventHandler(ID=1:< B: >) Mounted ----
   247:   652.225 [FM] DirNo = 100, FileNo = 5218
   248:   661.054 [FM] Cluster = 131072, Total = 486992, Free = 84374
   249:   661.121 [FC] _FC_GetNewDirDcfNo (2, 0, 0, 0)
   250:   661.164 [FM] fmSetInitialCardInfo (Drive = 2, 0)
   251:   662.319 [RSC] PROP_CARD1_FOLDER_NUMBER
   252:   662.811 [RSC] this->dwCardStatus[1] = 0x1(552)
   253:   664.121 [RSC] Storage Space 84374
   254:   664.558 [FM] pfNotifyDcfNoCBR(2:100_5218)
   255:   664.733 [RSC] srmNotifyDcfNo 0x2 100 5218 0 1
   256:   664.770 [RSC] srmSetDcfNoTableOrDiff 1 100 5218 1
   257:   664.787 [RSC] Diff Dcf List
   258:   664.804 [RSC] Create Diff Dcf ListItem 100
   259:   664.839 [RSC] fTemporary 1 pMaxDcfNoInFolder->fTemporary 1
   260:   664.856 [RSC] Diff Dcf Over Write 100
   261:   664.907 [RSC] ####### [1]DCF No 5226
   262:   665.272 [RSC] BURST 48 Enable 1353 Reserve 8159232
   263:   665.340 [RSC] Burst 48 ENABLE 1353 Reserve 8159232
   264:   665.385 [RSC] ClearBusy(0x2100) 0x10->0x10,0x0(0x10)[0,0]
   265:   665.430 [SEQ] NotifyComplete (Cur = 3, 0x20010, Flag = 0x20000)
   266:   666.239 [SEQ] NotifyComplete (Cur = 3, 0x10, Flag = 0x10)
   267:   666.415 [FM] PROP_CARD2_FOLDER_NUMBER = 100
   268:   666.471 [FM] PROP_CARD2_STATUS = 0x1
   269:   666.563 [FM] PROP_CARD2_FILE_NUMBER = 5226
   270:   666.718 [SEQ] seqEventDispatch (Startup, 3)
   271:   666.877 [RSC] RealClearBusy(0x10) 0x10->0x0,0x0(0x0)
   272:   667.296 [PROPST] PROP_PERMIT_ICU_EVENT 0x0
   273:   668.015 [RSC] SRMExMem1_1State Event 4 Result State 6->6
   274:   668.137 [RSC] hExMem1_2StateObject Through Event 4 State 0
   275:   669.124 [RSC] RealClearBusy(0x2100) 0x0->0x0,0x0(0x0)
   276:   669.605 [PRP] M:6C F:0 L:0 P:2F
   277:   669.903 [STARTUP] internal version 03:03:07:00:6c:00:00:2f
   278:   670.501 [STARTUP] startupPrepareDevelop
   279:   670.889 [SHTFD] sdsInit
   280:   671.545 [SHTRD] sdsInit
   281:   671.666 [SHTP] spsActivate
   282:   686.876 [SHTP] Regist RPC Handler Master ALO
   283:   687.062 [SHTFD] sdsActivate
   284:   690.589 [SHTRD] sdsActivate
   285:   691.793 < GUI Lock > InitializeGUILock (PUB)
   286:   692.246 [GUI] MasterResultCBR
   287:   692.435 [AUDIO] InitializeAudioIC
   288:   692.542 [AUDIO] micResultCBR
   289:   692.603 [AUDIO] micDetectAckCBR�F0
   290:   692.805 [AUDIO] EnableAudioIC
   291:   692.834 [AUDIO] Reg(0x05) Data(0x0023)
   292:   692.959 [AUDIO] Reg(0x00) Data(0x0040)
   293:   693.033 [AUDIO] Reg(0x01) Data(0x0003)
   294:   693.094 [AUDIO] Reg(0x02) Data(0x0000)
   295:   693.147 [AUDIO] Reg(0x04) Data(0x006a)
   296:   693.235 [AUDIO] Reg(0x0E) Data(0x0091)
   297:   693.304 [AUDIO] Reg(0x0F) Data(0x0008)
   298:   693.364 [AUDIO] Reg(0x07) Data(0x0007)
   299:   693.417 [AUDIO] Reg(0x06) Data(0x0064)
   300:   693.469 [AUDIO] Reg(0x08) Data(0x00d2)
   301:   693.519 [AUDIO] Reg(0x09) Data(0x00d2)
   302:   693.569 [AUDIO] Reg(0x0C) Data(0x00d2)
   303:   693.619 [AUDIO] Reg(0x0A) Data(0x0090)
   304:   693.668 [AUDIO] Reg(0x25) Data(0x0090)
   305:   693.718 [AUDIO] Reg(0x0B) Data(0x0080)
   306:   693.767 [AUDIO] Reg(0x11) Data(0x0000)
   307:   694.025 [AUDIO] InitializeASIF�FPriority(23)
   308:   694.058 [AUDIO] EnableASIF
   309:   694.072 [AUDIO] WaitPllLockComplete
   310:   694.172 [FM] PROP_CURRENT_MEDIA = 2
   311:   733.254 [AUDIO] _PllLockTimeout
   312:   733.510 [AUDIO] InitializeSoundDevice
   313:   733.837 [SND] NRbuffer:0x009A1A6C
   314:   733.877 [MR_MOV] MOVW_Initialize
   315:   734.197 [MR] MVR_Initialize
   316:   734.541 [MR] mvrResultCBR : 0x9b6fe0
   317:   734.635 [MR] mvrChangeAckCBR : PROP_USBDEVICE_CONNECT(-1)
   318:   734.693 [MR] mvrChangeAckCBR : Video - Mode=0, Type=0, Rate=30, GOP=15
   319:   734.783 [MR] mvrChangeAckCBR : Sound Auto(C=2,R=48000,B=16)
   320:   734.813 [MR] mvrChangeAckCBR : AE_MODE_MOVIE(0)
   321:   734.832 [MR] mvrChangeAckCBR : ISO(0)
   322:   734.910 [MR] mvrChangeAckCBR : MOVIE_REC_VOLUME(L:47 R:47)
   323:   734.954 [MR] mvrChangeAckCBR : WindCut Off
   324:   735.496 [MP] MVP_Initialize (44, 22)
   325:   736.015 [MP_MOV] MOVR_InitializeMovReader (45, 23)
   326:   737.970 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 152
   327:   738.124 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 152
   328:   738.238 [EM] emRegisterMulticastCallback : EventID = 18, ClassID = 152
   329:   738.351 [EM] emRegisterMulticastCallback : EventID = 19, ClassID = 152
   330:   741.775 [LV] [GMT] PROP_AE_MODE:2
   331:   741.882 [LV] [GMT][WAKU] gmtChangeLensMFFace (state:0)
   332:   742.691 [LV] [GMT] PROP_TEMP_STATUS : STATUS_NORMAL
   333:   742.997 [LV] [GMT] gmtIgnore (state:0)
   334:   743.021 [LV] [GMT] PROP_SHOOTING_TYPE 0
   335:   743.348 [LV] [GMT] PROP_VIDEO_PHYSICAL_CONNECT:0x00000000
   336:   743.432 [LV] [GMT] PROP_HDMI_PHYSICAL_CONNECT:0x00000000
   337:   743.773 [LV] [GMT] PROP_LIVE_VIEW_FACE_AF
   338:   744.058 [LV] [GMT][WAKU] gmtSelAFModeLiveFromFace (state:7)
   339:   744.113 [LV] [GMT][WAKU] gmtUpdateFrameWithModeChange (state:7 mani:21)
   340:   744.238 [LV] [GMT] gmtSaveModeEvent state:0
   341:   744.394 [LV] [GMT] PROP_MOVIE_PARAM Mode:0, R(2->2), SC(0->0) SZ(0->0)
   342:   744.413 [LV] [GMT] PROP_MOVIE_PARAM DZ(0->0)
   343:   744.543 [LV] [GMT] PROP_LIVE_VIEW_VIEWTYPE_SELECT:1
   344:   745.052 [LV] [GMT][WAKU] gmtDispSize (state:7)
   345:   745.256 [LV] [GMT] PROP_AE_MODE_MOVIE:0
   346:   745.305 [LV] [GMT] PROP_AUTO_ISO_RANGE:Max(70)Min(48)
   347:   745.345 [LV] [GMT] PROP_MOVIE_REC_AF:(0)
   348:   745.386 [LV] [GMT] SPECIAL_OPTION_LVAE_GERO_MODE:0x00000000
   349:   745.503 [LV] PROP_LV_CONTINUOUS_RESULT
   350:   745.545 [LV] [GMT] PROP_IMAGE_ASPECT_RATIO: 0
   351:   745.573 [LV] [GMT][WAKU] gmtUpdateFrame (state:7) fModeChange:0
   352:   745.679 [LV] [GMT] gmtChangeAvailableArea state:0
   353:   745.826 [LV] PROP_LV_IMAGE_HANDLE_FOR_MULTIPLE_EXPOSURE:00000000
   354:   745.903 [LV] PROP_MULTIPLE_EXPOSURE_CURRENT_SHOTS 0
   355:   745.946 [LV] PROP_MULTIPLE_EXPOSURE_SETTING AUTOGAIN:1
   356:   745.961 [LV] PROP_MULTIPLE_EXPOSURE_SETTING:0
   357:   746.035 [LV] [GMT] gmtInit
   358:   746.117 [LV] [GMT] gmtStart:0x2
   359:   746.684 [LV] [GMT][WAKU] GMT_WAKU_Initialize
   360:   746.762 [LV] [GMT] gmtChangeAvailableArea state:1
   361:   747.314 [LV] [EVF] evfInit
   362:   748.147 [LV] [PATH] ClearRam::0x409bd200
   363:   748.164 [LV] [PATH] ResLock CreateLock[20] OK
   364:   748.318 [HPC] ReserveHPCopySingleChannel (2, 117)
   365:   748.485 [LV] [PATH] Flicker_GetPathParameter(1148)
   366:   748.607 [LV] InitializeLiveViewDefectDetection
   367:   749.280 [ENG] LockEng   [0x97645c][Evf]
   368:   749.412 [ENGP] [DEFM] WrAddr(CH=3)=0x1f788780
   369:   749.501 [ENGP] [DEFM] RdAddr(CH=10)=0x7d2f5c
   370:   749.544 [ENGP] [DEFM] RdAddr(CH=11)=0x5440e4
   371:   749.691 [ENGP] [DEFM] MergeCompleteCBR
   372:   749.746 [ENGP] [DEFM] MergeDefectsCount = 1536
   373:   749.787 [ENGP] [DEFM] Read1AbortCBR
   374:   749.804 [ENGP] [DEFM] Read2AbortCBR
   375:   749.837 [ENGP] [DEFM] Write1PopCBR
   376:   749.980 [ENG] UnLockEng [0x97645c][Evf]
   377:   750.364 [ENG] LockEng   [0x97645c][Evf]
   378:   750.478 [ENGP] [DEFM] WrAddr(CH=3)=0x1f798780
   379:   750.529 [ENGP] [DEFM] RdAddr(CH=10)=0x7d335c
   380:   750.564 [ENGP] [DEFM] RdAddr(CH=11)=0x552b4c
   381:   750.736 [ENGP] [DEFM] MergeCompleteCBR
   382:   750.792 [ENGP] [DEFM] MergeDefectsCount = 9394
   383:   750.839 [ENGP] [DEFM] Read1AbortCBR
   384:   750.858 [ENGP] [DEFM] Read2AbortCBR
   385:   750.889 [ENGP] [DEFM] Write1PopCBR
   386:   751.035 [ENG] UnLockEng [0x97645c][Evf]
   387:   751.438 [ENG] LockEng   [0x97645c][Evf]
   388:   751.550 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7b87b0
   389:   751.603 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3b9c
   390:   751.643 [ENGP] [DEFM] RdAddr(CH=11)=0x5615e4
   391:   751.698 [ENGP] [DEFM] MergeCompleteCBR
   392:   751.748 [ENGP] [DEFM] MergeDefectsCount = 161
   393:   751.779 [ENGP] [DEFM] Read1AbortCBR
   394:   751.798 [ENGP] [DEFM] Read2AbortCBR
   395:   751.831 [ENGP] [DEFM] Write1PopCBR
   396:   751.961 [ENG] UnLockEng [0x97645c][Evf]
   397:   752.273 [ENG] LockEng   [0x97645c][Evf]
   398:   752.379 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7b8a34
   399:   752.434 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3bc4
   400:   752.475 [ENGP] [DEFM] RdAddr(CH=11)=0x561868
   401:   752.528 [ENGP] [DEFM] MergeCompleteCBR
   402:   752.567 [ENGP] [DEFM] MergeDefectsCount = 159
   403:   752.597 [ENGP] [DEFM] Read1AbortCBR
   404:   752.614 [ENGP] [DEFM] Read2AbortCBR
   405:   752.641 [ENGP] [DEFM] Write1PopCBR
   406:   752.766 [ENG] UnLockEng [0x97645c][Evf]
   407:   753.068 [ENG] LockEng   [0x97645c][Evf]
   408:   753.170 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7b8cb0
   409:   753.216 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3bec
   410:   753.259 [ENGP] [DEFM] RdAddr(CH=11)=0x561ae4
   411:   753.309 [ENGP] [DEFM] MergeCompleteCBR
   412:   753.348 [ENGP] [DEFM] MergeDefectsCount = 156
   413:   753.381 [ENGP] [DEFM] Read1AbortCBR
   414:   753.399 [ENGP] [DEFM] Read2AbortCBR
   415:   753.429 [ENGP] [DEFM] Write1PopCBR
   416:   753.546 [ENG] UnLockEng [0x97645c][Evf]
   417:   753.834 [ENG] LockEng   [0x97645c][Evf]
   418:   753.935 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7b8f20
   419:   753.982 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3c14
   420:   754.021 [ENGP] [DEFM] RdAddr(CH=11)=0x561d54
   421:   754.072 [ENGP] [DEFM] MergeCompleteCBR
   422:   754.110 [ENGP] [DEFM] MergeDefectsCount = 200
   423:   754.143 [ENGP] [DEFM] Read1AbortCBR
   424:   754.160 [ENGP] [DEFM] Read2AbortCBR
   425:   754.195 [ENGP] [DEFM] Write1PopCBR
   426:   754.310 [ENG] UnLockEng [0x97645c][Evf]
   427:   754.586 [ENG] LockEng   [0x97645c][Evf]
   428:   754.694 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7b9240
   429:   754.741 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3c3c
   430:   754.784 [ENGP] [DEFM] RdAddr(CH=11)=0x562074
   431:   754.839 [ENGP] [DEFM] MergeCompleteCBR
   432:   754.875 [ENGP] [DEFM] MergeDefectsCount = 145
   433:   754.907 [ENGP] [DEFM] Read1AbortCBR
   434:   754.924 [ENGP] [DEFM] Read2AbortCBR
   435:   754.951 [ENGP] [DEFM] Write1PopCBR
   436:   755.071 [ENG] UnLockEng [0x97645c][Evf]
   437:   755.359 [ENG] LockEng   [0x97645c][Evf]
   438:   755.458 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7b9484
   439:   755.505 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3c64
   440:   755.545 [ENGP] [DEFM] RdAddr(CH=11)=0x5622b8
   441:   755.601 [ENGP] [DEFM] MergeCompleteCBR
   442:   755.641 [ENGP] [DEFM] MergeDefectsCount = 165
   443:   755.670 [ENGP] [DEFM] Read1AbortCBR
   444:   755.689 [ENGP] [DEFM] Read2AbortCBR
   445:   755.718 [ENGP] [DEFM] Write1PopCBR
   446:   755.838 [ENG] UnLockEng [0x97645c][Evf]
   447:   756.124 [ENG] LockEng   [0x97645c][Evf]
   448:   756.233 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7b9718
   449:   756.285 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3c8c
   450:   756.325 [ENGP] [DEFM] RdAddr(CH=11)=0x56254c
   451:   756.376 [ENGP] [DEFM] MergeCompleteCBR
   452:   756.409 [ENGP] [DEFM] MergeDefectsCount = 154
   453:   756.438 [ENGP] [DEFM] Read1AbortCBR
   454:   756.455 [ENGP] [DEFM] Read2AbortCBR
   455:   756.482 [ENGP] [DEFM] Write1PopCBR
   456:   756.605 [ENG] UnLockEng [0x97645c][Evf]
   457:   756.892 [ENG] LockEng   [0x97645c][Evf]
   458:   756.992 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7b9980
   459:   757.044 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3cb4
   460:   757.081 [ENGP] [DEFM] RdAddr(CH=11)=0x5627b4
   461:   757.127 [ENGP] [DEFM] MergeCompleteCBR
   462:   757.163 [ENGP] [DEFM] MergeDefectsCount = 157
   463:   757.195 [ENGP] [DEFM] Read1AbortCBR
   464:   757.211 [ENGP] [DEFM] Read2AbortCBR
   465:   757.240 [ENGP] [DEFM] Write1PopCBR
   466:   757.369 [ENG] UnLockEng [0x97645c][Evf]
   467:   757.656 [ENG] LockEng   [0x97645c][Evf]
   468:   757.756 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7b9bf4
   469:   757.805 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3cdc
   470:   757.846 [ENGP] [DEFM] RdAddr(CH=11)=0x562a28
   471:   757.897 [ENGP] [DEFM] MergeCompleteCBR
   472:   757.933 [ENGP] [DEFM] MergeDefectsCount = 152
   473:   757.964 [ENGP] [DEFM] Read1AbortCBR
   474:   757.980 [ENGP] [DEFM] Read2AbortCBR
   475:   758.011 [ENGP] [DEFM] Write1PopCBR
   476:   758.131 [ENG] UnLockEng [0x97645c][Evf]
   477:   758.423 [ENG] LockEng   [0x97645c][Evf]
   478:   758.526 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7b9e54
   479:   758.573 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3d04
   480:   758.610 [ENGP] [DEFM] RdAddr(CH=11)=0x562c88
   481:   758.664 [ENGP] [DEFM] MergeCompleteCBR
   482:   758.702 [ENGP] [DEFM] MergeDefectsCount = 154
   483:   758.737 [ENGP] [DEFM] Read1AbortCBR
   484:   758.754 [ENGP] [DEFM] Read2AbortCBR
   485:   758.779 [ENGP] [DEFM] Write1PopCBR
   486:   758.898 [ENG] UnLockEng [0x97645c][Evf]
   487:   759.184 [ENG] LockEng   [0x97645c][Evf]
   488:   759.290 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7ba0bc
   489:   759.339 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3d2c
   490:   759.375 [ENGP] [DEFM] RdAddr(CH=11)=0x562ef0
   491:   759.424 [ENGP] [DEFM] MergeCompleteCBR
   492:   759.521 [ENGP] [DEFM] MergeDefectsCount = 157
   493:   759.560 [ENGP] [DEFM] Read1AbortCBR
   494:   759.577 [ENGP] [DEFM] Read2AbortCBR
   495:   759.607 [ENGP] [DEFM] Write1PopCBR
   496:   759.730 [ENG] UnLockEng [0x97645c][Evf]
   497:   760.031 [ENG] LockEng   [0x97645c][Evf]
   498:   760.141 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7ba330
   499:   760.193 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3d54
   500:   760.231 [ENGP] [DEFM] RdAddr(CH=11)=0x563164
   501:   760.292 [ENGP] [DEFM] MergeCompleteCBR
   502:   760.322 [ENGP] [DEFM] MergeDefectsCount = 586
   503:   760.358 [ENGP] [DEFM] Read1AbortCBR
   504:   760.373 [ENGP] [DEFM] Read2AbortCBR
   505:   760.405 [ENGP] [DEFM] Write1PopCBR
   506:   760.534 [ENG] UnLockEng [0x97645c][Evf]
   507:   760.833 [ENG] LockEng   [0x97645c][Evf]
   508:   760.941 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7bbe90
   509:   760.991 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3fcc
   510:   761.031 [ENGP] [DEFM] RdAddr(CH=11)=0x564cc4
   511:   761.083 [ENGP] [DEFM] MergeCompleteCBR
   512:   761.126 [ENGP] [DEFM] MergeDefectsCount = 151
   513:   761.157 [ENGP] [DEFM] Read1AbortCBR
   514:   761.174 [ENGP] [DEFM] Read2AbortCBR
   515:   761.202 [ENGP] [DEFM] Write1PopCBR
   516:   761.324 [ENG] UnLockEng [0x97645c][Evf]
   517:   761.619 [ENG] LockEng   [0x97645c][Evf]
   518:   761.718 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7bc0ec
   519:   761.770 [ENGP] [DEFM] RdAddr(CH=10)=0x7d3ff4
   520:   761.815 [ENGP] [DEFM] RdAddr(CH=11)=0x564f20
   521:   761.865 [ENGP] [DEFM] MergeCompleteCBR
   522:   761.902 [ENGP] [DEFM] MergeDefectsCount = 170
   523:   761.937 [ENGP] [DEFM] Read1AbortCBR
   524:   761.958 [ENGP] [DEFM] Read2AbortCBR
   525:   761.982 [ENGP] [DEFM] Write1PopCBR
   526:   762.100 [ENG] UnLockEng [0x97645c][Evf]
   527:   762.384 [ENG] LockEng   [0x97645c][Evf]
   528:   762.490 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7bc394
   529:   762.544 [ENGP] [DEFM] RdAddr(CH=10)=0x7d401c
   530:   762.586 [ENGP] [DEFM] RdAddr(CH=11)=0x5651c8
   531:   762.636 [ENGP] [DEFM] MergeCompleteCBR
   532:   762.675 [ENGP] [DEFM] MergeDefectsCount = 152
   533:   762.707 [ENGP] [DEFM] Read1AbortCBR
   534:   762.725 [ENGP] [DEFM] Read2AbortCBR
   535:   762.756 [ENGP] [DEFM] Write1PopCBR
   536:   762.871 [ENG] UnLockEng [0x97645c][Evf]
   537:   763.162 [ENG] LockEng   [0x97645c][Evf]
   538:   763.274 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7bc5f4
   539:   763.331 [ENGP] [DEFM] RdAddr(CH=10)=0x7d4044
   540:   763.369 [ENGP] [DEFM] RdAddr(CH=11)=0x565428
   541:   763.420 [ENGP] [DEFM] MergeCompleteCBR
   542:   763.458 [ENGP] [DEFM] MergeDefectsCount = 169
   543:   763.489 [ENGP] [DEFM] Read1AbortCBR
   544:   763.507 [ENGP] [DEFM] Read2AbortCBR
   545:   763.538 [ENGP] [DEFM] Write1PopCBR
   546:   763.663 [ENG] UnLockEng [0x97645c][Evf]
   547:   763.949 [ENG] LockEng   [0x97645c][Evf]
   548:   764.056 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7bc898
   549:   764.105 [ENGP] [DEFM] RdAddr(CH=10)=0x7d406c
   550:   764.144 [ENGP] [DEFM] RdAddr(CH=11)=0x5656cc
   551:   764.192 [ENGP] [DEFM] MergeCompleteCBR
   552:   764.229 [ENGP] [DEFM] MergeDefectsCount = 148
   553:   764.263 [ENGP] [DEFM] Read1AbortCBR
   554:   764.280 [ENGP] [DEFM] Read2AbortCBR
   555:   764.307 [ENGP] [DEFM] Write1PopCBR
   556:   764.432 [ENG] UnLockEng [0x97645c][Evf]
   557:   764.728 [ENG] LockEng   [0x97645c][Evf]
   558:   764.829 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7bcae8
   559:   764.877 [ENGP] [DEFM] RdAddr(CH=10)=0x7d4094
   560:   764.916 [ENGP] [DEFM] RdAddr(CH=11)=0x56591c
   561:   764.967 [ENGP] [DEFM] MergeCompleteCBR
   562:   765.005 [ENGP] [DEFM] MergeDefectsCount = 165
   563:   765.041 [ENGP] [DEFM] Read1AbortCBR
   564:   765.061 [ENGP] [DEFM] Read2AbortCBR
   565:   765.090 [ENGP] [DEFM] Write1PopCBR
   566:   765.213 [ENG] UnLockEng [0x97645c][Evf]
   567:   765.497 [ENG] LockEng   [0x97645c][Evf]
   568:   765.595 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7bcd7c
   569:   765.647 [ENGP] [DEFM] RdAddr(CH=10)=0x7d40bc
   570:   765.681 [ENGP] [DEFM] RdAddr(CH=11)=0x565bb0
   571:   765.733 [ENGP] [DEFM] MergeCompleteCBR
   572:   765.765 [ENGP] [DEFM] MergeDefectsCount = 164
   573:   765.795 [ENGP] [DEFM] Read1AbortCBR
   574:   765.810 [ENGP] [DEFM] Read2AbortCBR
   575:   765.834 [ENGP] [DEFM] Write1PopCBR
   576:   765.966 [ENG] UnLockEng [0x97645c][Evf]
   577:   766.245 [ENG] LockEng   [0x97645c][Evf]
   578:   766.350 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7bd00c
   579:   766.407 [ENGP] [DEFM] RdAddr(CH=10)=0x7d40e4
   580:   766.451 [ENGP] [DEFM] RdAddr(CH=11)=0x565e40
   581:   766.504 [ENGP] [DEFM] MergeCompleteCBR
   582:   766.539 [ENGP] [DEFM] MergeDefectsCount = 157
   583:   766.570 [ENGP] [DEFM] Read1AbortCBR
   584:   766.587 [ENGP] [DEFM] Read2AbortCBR
   585:   766.612 [ENGP] [DEFM] Write1PopCBR
   586:   766.727 [ENG] UnLockEng [0x97645c][Evf]
   587:   767.010 [ENG] LockEng   [0x97645c][Evf]
   588:   767.116 [ENGP] [DEFM] WrAddr(CH=3)=0x1f7bd280


On this one, I played a bit more (I think to remember I took a picture with it), and it displays a bit more errors, like:

  1586:  1209.705 [DL ERROR] CommC STATUS1 Irregal!! : 15
  1587:  1209.974 [STARTUP] startupErrorRequestChangeCBR : OverWrite (0x82208101 => 0x8220820`
  [...]
  1596:  1245.150 [STARTUP] DispError 70 ERROR Time 2021/7/30 9:21:14


Full log: https://pastebin.com/ZrcCcHSr

Any idea what I can try? Do you think the screen issue is linked with this error 70?

-- EDIT --
I also tried to install the "Hello world" thing https://www.magiclantern.fm/forum/index.php?topic=14732.0 and it semi-works: the backlight is still broken, but the text is displayed when I use a lamp to read.
#5
Thanks for you answer Luther, and sorry for the delay: I'm not sure why but looks like I'm not notified when a new answer is posted.

So concerning continuous recording at 1800p, you mention SD overclock: I can't find any method to overclock SD on Digic 4 (including on 60D, A1ex suggest it may not possible). That means that in RAW recording I'm stuck with 960x540 resolution, which is awful. Any idea how I can overclock Digic 4 SD card?
#6
@Walter Schuiz: Well I have multiple questions all related to quality of videos on 60D devices (DIGIC 4):
1. is is true that the video is upscaled by Canon and not a real 1920x1080? (this part of the question is answered affirmatively by ArcziPL) If yes, how can I know the actual resolution I obtain in my device before upscaling? And is this resolution the one in the RAW picture (i.e. in the bayer matrix, i.e. the "debayered" resolution is still lower) or on the debayered image? (reading your answer ArcziPL, I understand it's on the bayer matrix, and that therefore the actual resolution is even lower?)
2. right now what is the current best method to obtain details on Canon 60D videos (I'm open to any solutions: HDMI, SD card overclock...). The proposed solution of ArcziPL is VAF filter + RAW, but unfortunately I can't get a large enough resolution on my Canon 60D due to the 20MB/s SD write limit.
3. if I can't get true 1080p recording with the current softwares, is is theoretically imaginable to later develop such recordings, or is the hardware just not fast enough? Here, I'm happy to use any sort of solutions: HDMI, card overclocking, custom OS unrelated with DryOS...

@ArcziPL: thanks for your answer.
1. I'm curious, how do you know the resolution of sensor readout in your device? And this resolution is on the bayer matrix right, not on the debayered image (so the actual resolution is even lower I guess).
2. Also, I can't find the 3x zoom mode (h264) on my 60D. The only "crop mode" I can find is the one proposed by Canon, but the final video has width 640x480...
3. Sadly I can't continuously record RAW at decent resolution. (at 10bits depth: 1920 is not even selectable, 1600x900 works during 10s, and continuous recording can be done at 960x540 which is not even 720p...). Is there any chance that the SD card can be overclocked on DIGIC 4?
#7
Oh, I'm not hoping to get more details with out of focus lens, my point is just to say that I can't find any good method to get detailed continuous videos from 60D.
#8
Hello,

I've been recently extremely disappointed by the video quality of the 60D (the photos are very good, so it's not a problem of the lens or of the focus). The aliasing is crazy, I have very poor sharpness and details... It is far to compete with my basic phone (and my phone is not even crazy with photos). For instance, here is a part of a 1080p frame (left is a 60D, right is my phone):


I read "Canon is doing line skipping instead of binning, that's why you get aliasing"... Well maybe, but I also have zero sharpness and details on faces: I'd expect line skipping to render aliased small lines, but not to alter significantly quite continuous shapes like faces. And even if putting my subject slightly out of focus does help to reduce aliasing, details are not there.

Actually, if I want to have comparable images between my phone and my Canon 60D, I need to reduce the resolution from my phone down to 720p. So I've the feeling that Canon is basically upscaling a video of quality 720p (and it would explain why faces have no details). My feeling seems to be confirmed on this page: they say that the line skipping is done on the RAW bayer matrix, and therefore when you combine multiple pixels from the bayer matrix together, you actually obtain an image which is close to 720p. This image is apparently upscaled by Canon to 1080p. I never saw that argument on Magic Lantern's forum: can anyone confirm that this happens in practice?


So my questions are the following:
- currently, what is the best solution to continuously record a video whose quality/sharpness/details are as good as possible (close to the result of my phone), while keeping as much as possible the whole view angle of my lens? (the 1x1 crop modes zooms way too much, and still is not perfect) If you know some post-production trick to get the details back, please let me know.
- is it theoretically imaginable to shot true 1080p videos (or as close as possible to 1080p: I don't want upscaled 720p) on 60D continuously? I don't really mind if it's RAW, H.264, I just don't want upscaled 720p. By theoretically, I'm talking about hardware mostly, and I'm trying to understand if there are fundamental limitations or if it's just a lack of development time and/or hardware knowledge. Notably: is there any fundamental limitations that would make SD overclocking impossible for the 60D? Would it be imaginable maybe to feed the hardware H.264 encoder with a proper 1080p image? If using a custom linux kernel instead of the canon firmware could help, I'd be very interesting to know.

Thanks!