Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - [email protected]

#1
Sorry because my english is not very good and I really cant find anything about that. too many forums and topics.

1 - Can anybody tell me please if in the last nighlty build for 5d MARK 2 can we shoot RAW in FULL HD? or at least in 1920x any panoramic 2,35 or 2,39 panoramic? Or maybe for that we still need crop mode?

2 - In this case we need crop mode in 5d M2, can now do a proper live view framing without this horrible black and white with 3 frames per second that we had before?

3 - in this last nigtly view can we proper test in play any clip in RAW or is also jumping and difficult to check?

Thanks and congratulations for the hard work!

DANI
#2
I have used disk drill but there is not MLV, at least into VIDEO folder types. Maybe is inside other folder and I have not seen it? Thanks!
#3
MAC yosemite
#4
Hi, I need to recover MLV files from an erased hard drive but no program look like do it.

I have seen there is one called Photorec that look like it does it but I don't see any executable file or any way to enter into terminal and how it to executed it from there

There is not an easy way? Thanks!!
#5
I have ffmpeg in this place "usr/bin" because first it says was missing, but as I say it doesn´t work.
#6
Sorry. Im new with this amazing app, but I can´t get it to work. I have download I think all the files. I have INSTALL FIRST the command stuff, and the run the app and select the folder in the CF CARD where the MLV hdr files are and them some folders appear like ORIGINAL, but inside the folders there is not any mov or converted dngs. I don´t get what to do.

Can anybody help? Thanks. I have a mac yosemite and 5D mark 2

THANKS
#7
Thanks!

I bought actually a USB 3.0 reader to actually did that but sometimes the audio is out of sync. But I guess is the best option now.

Thanks
#8
I thought it was the same thing, sorry.

I want to raise dynamic range in video maintaining 24 fps in 5D mark 2, like doing a HDR VIDEO? Can it be done? How.

Thanks!
#9
THANKS!

I have used the bin directory and execute the 3 files in my mac. Now what? Where I have to drag the folder with the dngs? im lost. I does nothing doing it into the terminal after executing cr2hdr.

Thanks
#10
Ive been 3 hours trying to understand how to mix the 2 dngs in a single stream of dngs and I can`t understand anything on this thread. Look like chineese for me. Please any easy way of walkthrought like for dummies, for the 5D MARK 2. I have recorded a clip and converted to DNGs. Now what? I have downloaded cr2hdr app but when I drag the dngs give me an error like trying to reach "exitwhatever" module and dcraw, but I cant find this stuff to install in the forum and when I get something is like a text for the terminal or for a website in code that I dont really get what is that. Please, help.

By the way, how many frames per second can the 5D MArk 2 reach in HDR? Thanks
#11
How many frames per second can you record with dual iso in 5d mark II? Can you real 23,976?

Thanks
#12
Thanks so I guess I will have to change the camera if I want more resolution. Magic lantern RAW anyway is a huge step forward but I don´t know how to use it in a real shooting with actors because you shoot and you want to check the take and it can´t be seen with sound or anything but black and white jumping footage. And if you say to me to buy a atomos ninja or shoogun, this is almost as expensive as getting a new camera and selling the 5D so I´m not going to do it. Any alternative to check footage like fast in the shooting, I mean with sound in sync?

Thanks
#13
I see. I start to understand. So, why 5d MII can get it in crop mode and not in normal mode? in this case can´t you arrange a crop mode that doesn´t crop so much? like some inches, so can be usable to angular shots too even if we loose some information?

Thanks!!
#14
General Help Q&A / Why I can´t increase resolution
July 08, 2015, 05:28:28 PM
Hi

I have 5D MII, and last Magic Latern nightly build. Iif you make the hack more and more difficult to shoot like putting overlays, or sound, more frames per second, or increase the space of information in the sensor to get, I see you start to need faster and faster card to achieve the constant ratio of frames.

BUT

If I just want to get a 2.35 panoramic ratio at 23,976 I see that the card demands start to decrease because I just lost a lot of information on the top and down the frame and also the frame rate is less, so magic lantern just ask me from 50 to 65 Mb of speed, but I have a 90Mb faster card so I still would have a little gap at least until 70 or 75 that I think is the limit of 5D mark II to INCREASE RESOLUTION.

BUT

The maximun magic lantern let me to increase is up to 1856x790 but I`m sure that the system would be able of getting better resolution in this frame rate and widescreen option or if not, getting rid of the sound and getting externally. So, what do you think? Am I crazy? Where I could ask for this feature of getting able at least to get 1920x1080p ? Actually you can get this resolution in 3x CROP MODE so Why not?


THANKS!!!  :)
#15
The max firmware in 5d Mark II is 2.1.2 as I see in the official webpage. Am I right? Thanks
#16
I have the last magic lantern nightly firmware but I dont know how to make that the monitor of the camera dont switch off when I put an output hdmi. I have to record too but it can be in h264, doesnt have to be in raw, and the quality could be 720p.

Some help?

THANKS!!

DANI
#17
Why you have that pink in the whites in premiere? I think this is not right. Maybe because the 32 bits import in AE?
#18
reddeercity I guess I did something wrong with PP 2014 but I can assure I tested it all and I was desperated. Thar´s why I was happy now. Anyway I'm not an expert in magic latern. By the way. Is there any way of testing the files we have shot after shooting in the camera (I have 5D mark 2). This is one of the reasons of not taking this software as a serious thing for a serious shooting,

Thanks
#19
I think you can access this raw options but now they are in one of the monitors, clicking in the name of the file. I don´t know if I express good. I guess you mean all the things that appears in adobe camera raw when you open a file in aftereffects? Premiere 2014 does not import my dng before, I tested it.

workspace preset? You have them reorganized and Premiere is more focused on them. I think you have not play around a lot with the program.

For me it goes in real time in Premiere 2015.

Hug
#20
They work a lot for giving you the best over and over. For me is really expensive but is my work so it worth it. I mean, I use as a daily basic Premiere, Media Encoder, Audition, After effects and Photoshop. From time to time adobe muse, acrobat cc, and always learning new tools like the new ones for iphone and ipad. They are always updating the apps, not like final cut that is kind of slow with updates.

I need that software for my work and Im not going to fight with piracy every year and cracks and shit. I need the last updates to be the best in my work. Of course if you are just playing or learning and not working, don't pay. Premiere now has new color correction lumetri tools and a useful library between apps, support for maginc lantern dng as I have seen, really nice and happy!!
#21
Hi

Today Adobe has released his Adobe Premiere 2015 - 15 June release. I have create a virtual drive with MLVFS from my MLV folder. Then I have import the first DNG of the clip into premiere. Premiere just gets the entire clip and not only that but I can play it in real time and with the new lumetri tools I can make a color correction in real time of my RAW material with my macbook pro from 2011. The footage maybe gets late from the audio a bit but if I put half resolition editing this gets fixed.

Incredible!!

Just test it. Before today I had to put ii in after effects and render like 1 hour to see a single shot and never in real time. That´s crazy!!

Enjoy!!

DANI
#22
Raw Video Postprocessing / Re: MLV sound glitches
November 09, 2014, 01:20:30 PM
Yes, it appears in audio editor. Sorry. I'm using CANON 5D MARK 2, Last nightly build of magic lantern and last firmware. Some months ago I did some test with other magic lantern version and the same thing happens. Yesterday I tried to deactivate audio gain in magic lantern that I have it in +23db and look like there is not more glitches but the audio is so low that is almost inaudible. I have it in CANON menu in MANUAL mode and in 40% of volume more or less.

THANKS
#23
Raw Video Postprocessing / Re: MLV sound glitches
November 08, 2014, 06:51:09 PM
I simply don't get what this long page is about. Do you want me to make a degree of asking questions? Ask what information you need to complete and I will say it. No problem. I don't think is my computer. The wav is always normal but from time to time it sounds like a big glitch in any take I do. I have a macbook pro with never glitches in any audio.

Thanks
#25
Raw Video Postprocessing / MLV sound glitches
November 08, 2014, 01:05:01 PM
Somebody knows why MLV of magic lantern sound have random glitches? I can't trust that system for a serious shooting.

Any way of fixing this?

THANKS!!!!