Messages

Got it.
Will have to run some tests here.

please let me know if there is any progress?

Quick benchmark run with an experimental sd_uhs.mo @280 MHz and my Sandisk Extreme Pro 200 MB/s (R200/W140):

please tell me where to download experimental sd_uhs.mo?
is he stable?

Are your benchmark runs show different results? Means: fallback to 20 MByte/s? Try running sd_uhs.mo and bench.mo but no other modules loaded.

Tried. In photo mode up to 90MB. In video mode, it drops to 20.
Sandisk extreme pro 170 mb.



on sd card Sandisk extreme pro200 mb does not give any overclocking

In fact we are not sure about 200MB/s with 64 GB. Western Digital specs tell it should be able to run R200/W90. I can retest with 256 GB variety (R200/W140).
170 MByte/s should run fine.
Have you tried both access modes (SDR104 and SDR50)?

I tried, the speed is about 20 mb / s

I tested several cards with 650D. Nothing to report. The only fast card not working according to plan: Integral Ultima Pro 256GB. Impressive benchmark numbers on PC (160 MByte/s in write mode) but sucks in cam running higher oc modes.

Are you using recommended card types?

Yes. Checked on all three recommended SD cards. Sandisk Extreme Pro. They are original and work great. unfortunately, in addition to the crop rec build with the overclocking module

@Wannabe

Try this build: magiclantern-crop_mood.2023Jul13.100D101_MoreDelay.zip

Dear Bilal, will this build run on canon 650? Seeing speed drop issue with sd_uhs module with all my eligible sd cards

What am I doing wrong?
Canon 650d.
speed test in photo mode for writing and reading is consistently above 80mb.
and in video mode 20

can i somehow start broadcasting on dji RavenEye with this module on canon 6d?

What is TNT?

Hi Guys. I just want to share the music video I made shot entirely with Canon 6D Magic Lantern Raw.

https://www.youtube.com/watch?v=lKJ_Zb8dIRM

I want to thank all of you guys responsible for developing this build and making our old camera still awesome. I have this camera for 7 years and with what it can do, I'm not planning to replace it anytime soon.

к

Wow.
excellent!  how about moore and alias?  Where are they?

Thank you Bilal, Levas and ML developers.  You are geniuses!  Always looking forward to your discoveries.

Nope, it's only ported for 700D and recently for 650D (very identical cameras), it's not that hard I think to make it work on 6D too, but it needs some more code adjustments.

it would be great.  especially shooting without aliasing.  and correct viewing x5 mode

for canon 6d there is a croprec new module like in 700d?

good work Levas! Thank. Presets work. Overclocking the card showed the best results at 240MHz. I noticed a flickering screen when playing a video with a high frame rate on the camera screen. there are no artifacts in postprocessing. Special thanks for the 1024x634 mode at 50fps. Tell me. Where to look for the crop mode 1824x818 50 frames per second? there is a feeling that he is one of the best.

Still, could be a good preset, no stretching in post, 16:9 aspect ratio, but 'just' 40fps.

if possible without skipping lines, this will be an interesting and very high-quality video

Interesting observation. My camera was shooting at 50fps 1824x634. There are no such settings in the module. Perhaps this is a module failure. MLVApp automatically stretched this video to 1824x1056. almost perfect 16: 9. How to add this preset?

is it already possible to download a new module for testing on canon 6d?

Haven't been able to break the above settings to 20Mb/s 

In video mode, recording bitrate starts at about 82Mb/s, saw it climb up to 88Mb/s during recording 

Benchmark in video mode:
Write speed 80.0 Mb/s
Read speed 83.7 Mb/s
Write speed 80.0 Mb/s
Read speed 83.5 Mb/s

unbelievable!

Is it possible to get ML-preview (half-press) to work on an external monitor and how?

Preview works great, did you set in RawVideo menu : Preview<=Framing? Or aren't you talking about Liveview (view while recording)

I'm talking about liveview in crop x5.  in this mode, the screen displays a much smaller frame field than it actually is.  To see the actual size of the recorded video, you must press the shutter button halfway.  but this doesn't work with an external monitor connected By the way, here is my video where half the frames were shot in crop rec mode 2560x1440 24fps x5 crop. I really like the new features of my camera.
https://youtu.be/Sjxn-Ha7XaU

The 5x zoom liveview is indeed not correct framing, much smaller.
If you don't see ML-preview on half-shutter press, you probably need to push the 'info' button on your camera a few times.
With the 'info' button you normally get different overlays on liveview from Canon, like horizontal level meter or histogram and stuff, but it blocks ML-preview.
So try pressing the 'info' button until half-shutter press gives you ML-preview with correct framing.

thank. I noticed today that the preview (half-press) in cropping mode does not work with the connected external monitor.  maybe fix it somehow? 

Levas
Thanks for the development! The new 1440 crop mode works very well. I can record raw video for 10-15 seconds 12-14 bit losless. But the preview does not work (Half Press). The frame width is much larger than x5. it's great. sorry for my english