Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - gukuangshi

#1
Camera-specific Development / Re: ML on EOS-M2
January 03, 2019, 05:35:23 AM
Thank you a lot for your careful answers. I do get the warning when taking photo in Digital zoom mod. I thought the white balance could be adjusted back to auto in ML menu.
Quote from: dfort on January 03, 2019, 04:28:38 AM
That is by design, same as on the EOSM. In fact you should get a warning screen like this:



Interesting that the EOSM shows the same warning even though it  doesn't "officially" support Digital zoom from the Canon menu.

You need to use the Canon menu to switch back to auto white balance. (Once again funky colors when doing a screenshot of the Canon menus.)





Not sure what you mean by that. The ML overlays often vanish, that's a bug.

Don't hold your breath. The EOSM, 100D, 650D and 700D can't do it. Check out the features matrix.
#2
Camera-specific Development / Re: ML on EOS-M2
January 03, 2019, 01:18:02 AM
NICE work on digital zoom. I have tried this vision, and I find that I can't take a photo with the Movie crop mode. One more question is that once the white balance is adjusted, it can't turn back to auto, and when taking photos, the liveview will change. Hope trap Focusing mode will come one day.
#3
Camera-specific Development / Re: ML on EOS-M2
December 25, 2018, 07:21:48 AM
Quote from: dfort on December 25, 2018, 05:17:07 AM
Look on your SD card under ML/LOGS/ADTG.LOG

Here is the line I'm looking for (this one is from the EOSM):

Canon EOS M 2.0.2
00f00000:     803 ISO=100 Tv=160 Av=35 lv=0 zoom=1 mv=0 res=-1 crop=-1 task=ShootCapture pc=16d14 addr=4048124c Analog ISO (most cameras)


That seems about normal.

ML uses the down arrow (trash button) to open the ML menu. If you start without ML (press the SET button when starting) it should work. Note that you can change the behavior of the trash button using the Canon Custom Functions -- C.FnIV:Operation/Others [6]

[EDIT] On the EOSM using the unified branch a quick press of the trash button centers the focus box and a longer press opens the ML menu. On the iso-research branch a quick press of the trash button doesn't center the focus box.
Thank you very much. Merry Christmas to you. The Cannon Custom Functions of  the down arrow (trash button) won't work by a quick press. And to start the camera when press the center button (SET button), the camera still possesses ML.  And weather long press or short press, it's the same. I'm using magiclantern-Nightly.2018Dec23.EOSM2103.zip. I hope one day, a quick press of the trash button will realize Cannon Custom Functions with ML.
#4
Camera-specific Development / Re: ML on EOS-M2
December 24, 2018, 03:01:52 AM
Quote from: dfort on December 21, 2018, 05:53:18 PM
@gukuangshi - Welcome to the forum!

You're using a Minolta MD Rokkor 50 mm f/1.4 or is it a MC Rokkor-PF 58 mm f/1.4?



In any case, the ability to adapt so many different lenses is one of the strong points of this camera.

Using LiveView on any camera will raise the temperature and being a mirrorless camera it is always in LiveView mode. Now is ML causing the temperature faster than normal? Hard to see because the Canon overlays don't show the sensor temp. I don't have the EOSM2 in my hands at this time but what I did was to run this test on an EOSM. Turn on the camera with ML and checked the starting temperature, in my case 18C. Then pulled the card and turned on the camera and let it sit on LiveView for 1 minute, the temp rose to 24C. Let the camera cool back down to 18C and turned it on again this time with ML running for 1 minute--same results. Try it on the EOSM2, you should see the same results.

I'll let you figure out how to test this out, chances are power consumption will be pretty much the same whether or not you're using ML. Of course if you start using some of the advanced features like Danne's 100fps 4k feature  :P it will probably burn through batteries.

Don't expect too much right away, we're still trying to make a somewhat stable build for this camera. Check out the Feature comparison matrix page. If a feature isn't working on the EOSM, it probably won't work on the EOSM2.
I am using MC Rokkor-PF 58 mm f/1.4, as the color is more beautiful than md-rokkor-50-mm-f1.4. I once own many visions of minolta lens, the mc 50 1.4 pg processes better sharpness.  I will test the temperature again. In my camera, the temperature rises from 16-36 degrees after using 20 minutes. One more things, could you tell me how can I remain  center focus using free moving one point. In the manual, it says that when you touch other place, you can press delete(down) to turn back to the center focus. Thank you for your efforts, I will keep using newest vision of ML on my camera and report my advice.
#5
Camera-specific Development / Re: ML on EOS-M2
December 21, 2018, 09:34:45 AM
magiclantern-Nightly.2018Dec20.EOSM2103.zip now is available for eos m2, I don't find any deadly bug, and it works well on my camera. The temperature is rising fast and I wonder it can be solved or not. 
#6
Camera-specific Development / Re: ML on EOS-M2
December 21, 2018, 04:05:53 AM
Peak focus and zoom in focus work well on my eos m2 using MD 58 1.4 lens (magiclantern-Nightly.2018Dec14.EOSM2103). And the interval time-lapse is also great. But the temperature is growing fast,and the power consumption is fast. I hope that next vision will fix the high power consumption.  New functions such as digital interpolation zoom and trap focus are expected.  Please keep trying! We will do some test and feedback.