Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - sebi2k4

#1
Camera-specific Development / Re: Canon 100D / SL1
July 23, 2018, 12:22:33 AM
Ahhh thanks Danne for this listing. I just added 'activate and run sd overclocking' after activating the other modules and now I'm able to use the RAW video feature with high resolutions.
I need to test a few shots during the next days to get a bit familiar with it. And then I guess I will need a faster sd card  :D

I'll keep you updated in case of any bugs.

Again, thank you all for this achievement.  ;)
#2
Camera-specific Development / Re: Canon 100D / SL1
July 22, 2018, 04:54:24 PM
Quote from: Danne on July 22, 2018, 04:40:40 PM
Enabled crop_rec.mo? All higher res modes are in crop_rec menu. Enable one of those and then enable sd_uhs...

Hi Danne,
nope didn't activate that module. Now I did and I can choose one of the higher resolution modes in movie menu. Do I still need the RAW video setting in movie menu activated? Cause if I do activate it I don't get the higher resolutions there.
#3
Camera-specific Development / Re: Canon 100D / SL1
July 22, 2018, 04:37:07 PM
@Walter Schulz: Vielen Dank für den Tipp. Es lag tatsächlich an einer Einstellung im Movie Menü: "Movie Crop Mode" war aktiviert - damit ging das mit der Lupe nicht mehr. Kommst du auch aus Deutschland?

@all: Walter resolved my problem with the magnifier button. I had a wrong setting in Movie menu: 'Movie Crop Mode' has been activated and autofocus was on. Now at least pressing the button twice and getting a 5x magnification works fine.

But I'm still not able to get some RAW video recording with higher resolutions by sd overclocking. At least with low fps.
Could you Walter or somebody around here please explain the steps which have to be done with this build from Danne?
https://bitbucket.org/Dannephoto/magic-lantern/downloads/magiclantern-Nightly.2018Jun30.100D101_2K-3K-4K.zip

Thanks in advance.
#4
Camera-specific Development / Re: Canon 100D / SL1
July 22, 2018, 01:15:49 AM
thank you for this hint. The 5x crop mode worked exactly one time after setting from AF to MF. After returning to the ML menu i have the same issues again with pressing the magnifier button and nothing happens. Live Preview says something like "processing... please wait" (<-- sorry for not being accurate here but my menu language is german :D )

Could you or someone here please post the correct settings which has to be done?
#5
Camera-specific Development / Re: Canon 100D / SL1
July 21, 2018, 11:47:37 PM
Hi guys,

first of all, thank you for the effort you spend in this to make our 100D / SL1 way better. I really appreciate it.
As I've been reading a lot on this forum in the last weeks I now wanted to try this new achievements regarding raw video with 1080p resolutions and larger.

I did download and install this build from Danne (thanks again  ;) ) as recommended in the post quoted below:
https://bitbucket.org/Dannephoto/magic-lantern/downloads/magiclantern-Nightly.2018Jun30.100D101_2K-3K-4K.zip

Quote from: IDA_ML on July 01, 2018, 02:23:28 PM
I strongly encourage all 100D users to test the above build and share their findings here.  Not only will this help our developers but also playing around with this build is a lot of fun!  I am sure, you will not regret.

Unfortunately I need some short instructions for me as a beginner similar to those in post #1417 written by IDA_ML. Seems like adtg_gui module isn't needed any more.
I did load the 3 modules which are left 'lua', 'mlv_lite' and 'sd_uhs' but in MLV Menu I am not able to get larger resolutions. Experimented with 'mlv_snd' and 'mlv_play' additionally but didn't change anything.

Note: I do only have a 30 MBit/s SD card atm. I will buy the recommended one asap. But I thought if I reduce the fps to lets say 2 or 6 or something recording has to be possible with my SD card too right?

I would really appreciate if one of you experts could help me out on that one and again thank you for what you are doing to the Canon-Community.

//EDIT: I tried running the 'enable SD overclocking' script but the highest resolution I get (even with 2 fps) is 1800x1008.
I guess I do need some basic instructions like which mode do I have to use 'Picture' or 'Video' mode?
How can I get this 5x crop thing done? Pressing the magnifier button twice doesn't do anything in video mode.
#6
Raw Video / Re: 100D/SL1 RAW Video guidance needed
April 09, 2018, 06:04:07 PM
Thanks a lot dfort. Your post helped me a lot understanding things better now.
Please allow me one or two further questions to make sure I can put it to practice. 

1. Understood that the "zoom mode" may be my option to use even though I need to deal with a transformation of focal length. Which ML modules do I have to acitvate and which settings in canon and ML menu do I have to use in order to use this mode? Sorry if there is already a documentation about this. Didn't find it.

2. Your hint with the "large sensor film look" sounds pretty good to me. I would like to try out 10 or 12bit lossless compression even with only 23.976 fps. I guess without zoom mode this won't get me to 1920x1080 on the 100D, correct? But I'd also love to try out. So same question as on 1.: Which modules and settings do I need for it?

Thanks again.
#7
Raw Video / 100D/SL1 RAW Video guidance needed
April 08, 2018, 04:29:41 PM
Hi there,

first of all I am really impressed what you all are doing here to make our canons even better. Thanks for that.

Now as I experimented with ML for about a week (with intervalometer and still images) I would like to get a step further with RAW video recording.
My intention is to use my 100D to shoot some good looking videos in a resolution as close to 1920*1080 as possible. And of course I am really dissapointed with the video quality the canon firmware brings up.
Seems like I need some guidance with the RAW module(s). I would really appreciate any help of you experts.

1. I have installed the 4K raw video experimental build for 100D on my SD card which was formatted inside my camera (on low level) as it says in the ML installation documentation. Do I need to switch over to exFAT for recording raw videos in good quality or is the whole 'exFAT thing' only for creating files bigger than 4gb?

2. I am kind of confused with that 'Canon feature comparison sheet' https://docs.google.com/spreadsheets/d/16cgnRivbUv7nA9PUlCLmLdir3gXdIN3pqzCNAAybepc/edit#gid=5
I always read that the maximum horizontal resolution using the 100D for raw video is 1728. But the column 'max resolution in crop mode' says that 2496x1080 is possible.
As I mentioned I would love to create good looking videos in 1920*1080 resolution, can I do so using this 'crop mode'. What do I have to do to use it? Is there any documentation for that?

3. Following to that my third question is: which settings do I need in both canon settings and ML settings to achieve my goals described above?

Sorry for my noobish questions but I hope I posted it in the right forum and I find some guidance ;-)

Thanks in advance.