Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - leozan

#1
dear jimi....summer talking  :D...

your question (already treated in this forum even if died in nothing ...)   pertinent and very shareable, in so many canon ML fans and not novices,  they have already done it in 2013 (search google and you'll see) already then the problem of enormous convenience in terms of space / registration as well as economic are raised , to use harddisk instead of the "small" expensive cf to record in raw! and in addition to experiments with cables and wires, there are also flowers of the cf (pcmcia) card adapters where theoretically it was possible to connect small IDE hardisk ... but all the speeches died in nothing ... we are in 2019, at the gates of 2020, and you're absolutely right !! impossible that today with all the news, fast ssd, cards and chips of all kinds and modes, no one has finally churned out a suitable adapter to connect the small ssd finally allowing good use of the elite RAW canons, as well as in the canon compressed formats of course! ....
in fact one thing is very clear .. it is certainly not the CF connector and their internal circuits to the canon, the problem ... but only and exclusively external. that is, you need an adaptation that allows you to power and connect a SSD hard disk.
why nobody did it? probably because CANON itself never wanted to have it come, tapping its mouth and experiments on the spot ... pity that not even the nonconformists without Russian and Chinese rules, have not given us anything today. I believe that by now you can forget something like that, and of course ... that a cf128 gb still costs 80 or more euros ... it is a huge great shame as well as the price with which panasonic continues to sell P2 (and not mini!) ... the world is rotten for that too!
#2
TRUE!!  computerbay x1000 and 1066 must be accurate tested with 14bit raw of ML canon , because they are squeezed at maximum write speed, and many don't match the declared speed, so you get errors and blocks
for this reason I ordered them from a shopkeeper who, before sending them, did not have amazon prices, they cost just under 160 euros, but they are totally reliable and without bad surprises.
eye with amazon that won't pay you back if they work for them!
and also 79 euro plus spedition (not free) ,,,they are not very few, since they should now cost 30-40 euros at most! 128 gb ... not 1280 !!!
#3
 :D well ... a little life on the topic ...   ;)
#4
Thanks , no problem , WAS only a question, no afraid.... ;)
#5
ANY HOPE to see later long time update of :
ML Nightly Build and ML crop_rec_4k  for 5D3 (123)  ?
...with Latest Lua updates + fixes 2019-03-20 ?

no way to do alone , bad....sorry.
thanks
#6
to read lasts back post for nightly and more in exp.  , seem not be all perfect.
but later many updates , now are months of silence.
I think we are in the near end or? :(
#7
Latest Nightly Build: 2018-07-03
Experim. Latest Build (2018-07-22)

what happen's ?!? afraid....
#8
I agree with you jimi.
Trollfan's answers without logic are not for me
I only saw an obvious general prolonged silence after a lucky period. I do not think in fact abounds of devs ...
and I agree too, that now the limits (and therefore novelty) at least for certain models, such as 5dmark3 have been achieved, except for a few maybe bug fixes. the fact remains (maybe not clear to someone) that the thanks for those who have done all this until now (ML DEVS) , remain and will remain indelible and alive for ever!!!
#9
how come everything seems dead?
after a good period it seems that nothing more comes out, no experimetal of any kind all dead?
#10
Quote from: a1ex on February 24, 2018, 09:18:18 PM
@leozan: there used to be a video tutorial on the first page, but the link is not working here...

thanks A1EX  I found this video , but was made with a old april release, and there are many new different options now in the last one ...
for begin is super (video)  but ofcourse I have many anotehr questions, I think very easy to answer for you or another expert.

like..

in this video, for recording in "high resolution" , are activated CROP_REC.mo  and MLV_LITE.mo (raw 1.1 lite)
Canon menu ofcourse in 1920 P 24 or 25 fps I-ALL
so later start again the 5D3  in video ML menu is set , raw video (example  2:35:1 , 3072 , 12 bit loss, preview "framing" )
so,  CROP MODE on > 3,5  1:1  x5zoom 
last  , out of menu, and pressed ZOOM  (x5)
ready to rec.

SO first question...but "crop option" MUT be always select for recording in high resolution up 1920 ?   so..must always mork togheter with RAW (MLV_Lite) ? or there are anothers modes without "crop options" ?!?

I not undesrtand why are presents also:

MLV_REC
RAW_REC
RAW_TWK

IF must be enable (mod) all ,  or not and for what exactly need  that ?!

second question (not showed in any video)  HOW recording  in H264 High resolution up 1920  , what mod must be enabled and how correct set menu /canon and ML before recording....

THANKS very much !!!

;)
#11
User Introduction / NEW user ML
February 24, 2018, 09:15:11 PM
Hi Leo here
I use normal ML on canon 5d3,
for few time I begin to try exp. version ML 4k...
but I understand not well how work fine with lasts releases...
hope to found help here.
thanks for the opportunity and any support!
;)
#12
Excuse me, big trouble to understand well how use correct this exp. version of ML.
canon 5d3 fw123
well I installed the last release of Feb. but I not understand and IF ML work fine in my Canon or there any errors meaby in installation files...

Setting dir is delete...all the another files (ML) are overwrite and all correct.

In setting I have many MOD "raw" to activate and also id is a very little info, I not understand what are the right to acrivate , IF CAN be all activated or just what need....

CROP_REC
MLV_LITE
MLV_PLAY
MLV_SND
MLV_REC
RAW_REC
RAW_TWK

IF I activate all that (and nothing another)...I turn off/on...enter in ML menu I have a big error on display
so I turn off  " RAW_REC "   and all seem to work fine (no errors)...

BUT  there are 2 MLV  to use....MLV_RAW and MLV_LITE 

and  CROP_REC

what I not understand is..  CROP_REC work togheter with MLV_RAW / LITE   or just alone ?!   if work alone , must be activated with zoom x 5 taste ?
i try but not luck... I set canon 1920 I-All or 720..but not understand the right steps to setting before begin rec.

MLV_RAW , always with "zoom x 5"  (canon x 720 25p)   how setting right for have a working 1920x960 50p  ?  i try nothing work....but also 3072x1308 24   ?!?
and  3072x1920 24 1;1 crop  ?!? with crop_rec activated ?!

very big big confusion and no steps/guide about here....
not possible to have a little guide , with this LATEST ML 4k  (no much old)  what MOD acitvated and how set the reflex for every risolutions possible exactly , so when must be Zoom x 5 and when not need or must be active CROP option ?

I Know , the expert smile about that, but I'm sure we are many to not undestand and no helps around....
thanks for the support and patience!!!