1
Camera Emergency Department / Re: [UNBRICKED] Bricked 60D Err 70
« on: August 10, 2017, 10:00:15 PM »
Hello,
My Canon 60D has a similar problem like others. The camera worked fine until it was stored in a wet camera bag after which the error 70 prevented using it. It displays error 70 on all shooting modes except the "C"/"CA" trick. First I have to turn the shooting mode to "CA" , power on then power off, change shooting mode to "C" and power on. I was wondering if someone could give me a modified autoexec.bin with disabled assert handler to unbrick the camera. The crash log file is as follows:
ASSERT: FALSE
at DevelopCombination.c:108, task RscMgr
lv:0 mode:0
RscMgr stack: 115e68 [115f90-114f90]
0xUNKNOWN @ ff07b8cc:115f88
0xUNKNOWN @ ff1dcb80:115f60
0xFF1DC5DC @ ff02c3fc:115f28
0xUNKNOWN @ ff1dc60c:115f18
0xUNKNOWN @ ff1dc694:115ef8
0xFF0CAE58 @ ff0c992c:115ec0
0xFF013EC0 @ ff0caf18:115ea0
0x1FE00368 @ 1fe006d0:115e68
Magic Lantern version : Nightly.2017Aug07.60D111
Mercurial changeset : ff6f36e11acb (unified) tip
Built on 2017-08-06 22:14:23 UTC by jenkins@nightly.
Free Memory : 390K + 1920K
My Canon firmware version is 1.1.1.
Email: aimin.mn@gmail.com
Thanks.
The log002.log is as follows:
My Canon 60D has a similar problem like others. The camera worked fine until it was stored in a wet camera bag after which the error 70 prevented using it. It displays error 70 on all shooting modes except the "C"/"CA" trick. First I have to turn the shooting mode to "CA" , power on then power off, change shooting mode to "C" and power on. I was wondering if someone could give me a modified autoexec.bin with disabled assert handler to unbrick the camera. The crash log file is as follows:
ASSERT: FALSE
at DevelopCombination.c:108, task RscMgr
lv:0 mode:0
RscMgr stack: 115e68 [115f90-114f90]
0xUNKNOWN @ ff07b8cc:115f88
0xUNKNOWN @ ff1dcb80:115f60
0xFF1DC5DC @ ff02c3fc:115f28
0xUNKNOWN @ ff1dc60c:115f18
0xUNKNOWN @ ff1dc694:115ef8
0xFF0CAE58 @ ff0c992c:115ec0
0xFF013EC0 @ ff0caf18:115ea0
0x1FE00368 @ 1fe006d0:115e68
Magic Lantern version : Nightly.2017Aug07.60D111
Mercurial changeset : ff6f36e11acb (unified) tip
Built on 2017-08-06 22:14:23 UTC by jenkins@nightly.
Free Memory : 390K + 1920K
My Canon firmware version is 1.1.1.
Email: aimin.mn@gmail.com
Thanks.
The log002.log is as follows:
Code: [Select]
Wed Aug 9 18:07:49 2017
0: 11.809 [STARTUP]
K287 ICU Firmware Version 1.1.1 ( 3.3.7 )
1: 11.875 [STARTUP]
ICU Release DateTime 2012.05.14 13:18:25
2: 12.221 [SEQ] CreateSequencer (Startup, Num = 6)
3: 12.488 [SEQ] NotifyComplete (Cur = 0, 0x10000, Flag = 0x10000)
4: 14.252 [SEQ] seqEventDispatch (Startup, 0)
5: 14.279 [STARTUP] startupEntry
6: 52.611 [PROPST] Initialize Adjective & Situation
7: 53.010 [HPD] # 1 0 1
8: 56.499 [PROPST] Clear Adjective & Situation (StartupCondition)
9: 56.903 [PROPST] AEMode New:0 Last:0
10: 57.000 [PROPST] Active Adjective & Situation
11: 57.118 [PROPST] ReqChangeCBR : Adjective 0, 0
12: 57.156 [PROPST] Not ExecMultiConvert Already None : Adjective 0, 0
13: 57.246 [PROPST] Not ExecMultiConvert : Situation 0
14: 57.316 [PROPST] CurrentAdjective 0 0
15: 58.849 [HPD] CreateTask Master End
16: 60.513 [EM] emSlaveChangeCBR : AUTO_POWEROFF (1)
17: 60.673 [EM] emSlaveChangeCBR : UILOCK (0x0)
18: 61.160 [HPD] ERASE SW OFF
19: 111.029 [STARTUP] startupPropAdminMain : End
20: 111.107 [SEQ] NotifyComplete (Cur = 1, 0x20000002, Flag = 0x20000000)
21: 155.773 [SEQ] NotifyComplete (Cur = 1, 0x2, Flag = 0x2)
22: 156.353 [PROPST] AEMode New:0 Last:0
23: 156.779 [PRP] Deliv WaitID = 0x80000001, 0xFF1B8BF8(1)
24: 157.551 [PRP] Complete WaitID = 0x80000001, 0xFF1B8BF8(0)
25: 157.628 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 1034
26: 158.173 [SEQ] seqEventDispatch (Startup, 1)
27: 158.211 [STARTUP] startupPrepareProperty
28: 158.374 [PRP] MovieParamData
29: 158.513 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0xf zoom 0x0
30: 161.355 [FM] FM_Initialize (0, 1, 0)
31: 161.906 [FM] fmResultCBR (0x80e4a4)
32: 163.177 [FM] PROP_HDD_DCIM_PATH (/)
33: 163.789 [PROPST] AEMode New:2 Last:0
34: 164.170 [PRP] Complete WaitID = 0x8000003F, 0x00000000(0)
35: 164.427 [FC] FC_Initialize [drive:3][ClassID:39]
36: 164.783 [FM] PROP_CARD1_STATUS = 0x1
37: 164.923 [FM] PROP_CARD1_FOLDER_NUMBER = 142
38: 165.025 [FM] PROP_CARD1_FILE_NUMBER = 0
39: 165.179 [FM] PROP_CARD2_STATUS = 0x1
40: 165.280 [FM] PROP_CARD2_FOLDER_NUMBER = 100
41: 165.391 [FM] PROP_CARD2_FILE_NUMBER = 3268
42: 165.513 [FM] PROP_CARD3_EXIST = 0
43: 165.571 [FM] PROP_CARD3_STATUS = 0x1
44: 165.637 [FM] PROP_CARD3_RECORD = 0 => 0
45: 165.700 [FM] PROP_CARD3_FOLDER_NUMBER = 100
46: 165.789 [FM] PROP_CARD3_FILE_NUMBER = 0
47: 165.904 [FM] PROP_FILE_NUMBERING_MODE = 1, 0
48: 165.976 [FM] PROP_CARD_EXTENSION = 132
49: 166.043 [FM] PROP_CURRENT_MEDIA = 2
50: 166.111 [FM] PROP_USBDEVICE_CONNECT = -1
51: 166.183 [FM] PROP_NUMBER_OF_CONTINUOUS_MODE = 3268
52: 166.223 [SEQ] NotifyComplete (Cur = 2, 0x10, Flag = 0x10)
53: 166.356 [FM] PROP_DSDEFINE ModelId 80000287
54: 166.445 [SEQ] seqEventDispatch (Startup, 2)
55: 166.469 [STARTUP] startupPrepareCapture
56: 167.135 [RSC] hMemoryQueue (0x620010) hStorageQueue (0x640012)
57: 168.880 [RSC] AllocateMemoryUnit For ExMem1
58: 168.905 [RSC] AllocateMemoryUnit For ExMem1_2
59: 168.924 [RSC] AllocateMemoryUnit For OnlyMem1
60: 170.211 [RSC] MemMgr(IMAGE) 0 2
61: 170.252 [RSC] MemMgr(IMAGE) 0 0
62: 170.279 [RSC] MemMgr(IMAGE) 0 7
63: 170.303 [RSC] MemMgr(IMAGE) 0 0
64: 170.370 [RSC] PROP_MEMORY_STATUS(SELF) (0->)3 (OTHER) 3
65: 170.391 [RSC] Deliver PROP_MEMORY_STATUS 3
66: 170.932 [RSC] SRMExMem1_1State Event 0 Result State 0->6
67: 170.970 [RSC] hExMem1_2StateObject Through Event 0 State 0
68: 171.587 [RSC] SRMExMem1_1State Event 4 Result State 6->6
69: 171.617 [RSC] hExMem1_2StateObject Through Event 4 State 0
70: 172.365 [RSC] this->dwCardStatus[0] = 0x1(552)
71: 173.096 [RSC] this->dwCardStatus[1] = 0x1(552)
72: 173.806 [RSC] this->dwCardStatus[2] = 0x1(552)
73: 174.522 [RSC] PROP_PC_HDD_STATUS = 0x1
74: 175.485 [RSC] NO IMAGEFORMAT EstimatedSize.c 10
75: 175.519 [RSC] NO IMAGEFORMAT EstimatedSize.c 10
76: 175.555 [RSC] ERROR SetDevelopImageCondition DevelopCombination.c 107
77: 176.744 [RTC] !! RTC CHECK ERROR !!
78: 179.916 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 128
79: 180.150 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 128
80: 180.357 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 128
81: 181.563 [JOB] InitializeJobClass (ID = 25253, Num = 17)
82: 181.888 [JOB] [BIND] dcsResultCBR (0x931b20)
83: 182.155 [JOB] PROP_CFN_TAB2 10 10
84: 183.694 [STARTUP] ERROR ASSERT : DevelopCombination.c, Task = RscMgr
85: 183.780 [STARTUP] ERROR ASSERT : Line 108
86: 183.828 [STARTUP] ERROR ASSERT : FALSE
87: 183.917 [STARTUP] ASSERT Time 1899/12/31 0:0:0
88: 185.346 [STARTUP] startupErrorRequestChangeCBR (0x1d)
89: 185.476 [STARTUP] startupErrorRequestChangeCBR : ErrorSend (101, ABORT)
90: 185.928 [CERES] RegisterGPSInfoCallback
91: 186.653 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
92: 187.924 [JOB] InitializeInnerDevelopJobClass (ID = 25253, Num = 16)
93: 187.996 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 10 )
94: 189.526 [SND] Seq LPC 5-0
95: 189.571 [SND] HARB_ARBMODE Before:0x00000000 Current:0x00000000
96: 189.609 [SND] HARB_HARBCTRL Before:0x002AEAA8 Current:0x002AEAA8
97: 189.621 [SND] Seq LPC 5-1
98: 189.677 [SND] Seq LPC 5-2
99: 189.720 [SND] Seq LPC 5-3
100: 189.773 [SND] Seq LPC 5-4
101: 189.786 [SND] Seq LPC 5-5
102: 189.798 [SND] Seq LPC 5-6
103: 190.206 [SND] Seq LPC 5-7
104: 190.220 [SND] Seq LPC fin
105: 192.219 [SEQ] NotifyComplete (Cur = 3, 0xe0110, Flag = 0x40000)
106: 192.400 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 147
107: 192.659 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 147