Messages

Very interesting Canon patent

https://www.canonrumors.com/patent-expanded-dynamic-range-using-dpaf-sensors/

"It should be noted that the patent does mention in-vehicle sensors, but can also be applied to any other type of sensor as well"

...pity that they only want to use it for cars

Naaa at least one is trying to perform some test
But also testing needs some time...looking forward for the sensor readout speed with a Arduino and LED.

I hope i can perform the tests this weekend

I thought i missed something 

So again; i copied the FIR file on the SD Card and started my camera. Than i loaded the FIR file with the FW Update.
After the "update" the LED blinks some times and stops after a few seconds.

I tried to take a picture but the shutter did not release! Also the focus was not working.
Browsing through the Menu works.

So i turned the camera off and checked the SD Card: no files...only the standard folders are on it.

The behavior is with both FIR files the same...

Okay, i've done some tests:

- I Updated my FW with your first FIR file (LVRAW5D4.FIR)
- i started the camera and waited - nothing happend
- i turned the camera off
- i turned the camrea on and took a picture during the first 5 sec
-> than i copied the content of my SD Card into a folder on my PC
- changed to Dual Pixel RAW and restarted the camera
- took a Dual Pixel RAW photo during the first 5 sec
-> than i copied the content of my SD Card into a folder on my PC

I also took some videos in 4K and 1080p at different framerates and video options.

Before i continue testing with all resolutions and framerates; i'm not sure if i've done these tests right! I can't find any readable log file...but also, i am a big noob in this area :-D
I uploaded the content of my SD Card to my DropBox:

https://www.dropbox.com/sh/pspmzkkvhkccfmz/AABhoGSy6W1LR0lYSkEQXKvja?dl=0

Please let me know if i missed something or if this is the way to continue the tests...

Thanks

Well i updated my FW to 1.0.4 so i'm ready.

I need a little bit of instructions what i exactly have to do...

Don't hold your breath ;-)


I still have the FW 1.0.1 on my 5D IV -> this means i could perform some tests right?

This means that we are able to enable the bootflag on 5D4?
LED blinking worked as well.

So we need to figure out how to jump to main Firmware?

I'm not a dev but have some very basic skills of C++...and next year i have a bit of time :-)
I would be great if someone may point me in the right direction...

Cheerio

Did you allready ask Google?
I never did because the Problem does not appear at my private pc.

I found the following:

https://blog.mozilla.org/tanvi/2013/04/10/mixed-content-blocking-enabled-in-firefox-23/

Cheerio

@IDA_ML
I have the same Problem but only in my office...i guess it's a browser Problem (using Microsoft Edge)

Open the console with F12 and you'll get the source.
There you'll find the link if you search for "YouTube" or "vimeo" 

Ehm...i don't have a Mark III...but i read that it slows down if you put in a SD Card:


https://www.dpreview.com/forums/thread/3226564

or

https://fstoppers.com/news/using-sd-and-cf-card-simultaneously-your-5d-mkiii-might-be-bad-idea-5750

I don't know how it works with ML but i think with a Mark III you should not use any SD Card if you need performance 

Don't hate yourself....use the time for learning C++:

http://www.learncpp.com/

voilà:

https://www.usa.canon.com/internet/portal/us/home/explore/eos-6d-mark-ii

Maybe I will pay for the upgrade so that I can do a side by side:
5diii 1920x1080 ML 14 bit lossless vs 5div cine style vs 5div c - log
And then most likely come to the conclusion that the upgrade was pointless.

Did you allready try the "C-Log" from EOSHD?

http://www.eoshd.com/2016/09/now-available-eoshd-picture-profiles-brings-c-log-canon-dslrs-including-1d-x-mark-ii-5d-mark-iv/

It's way cheaper :-)

I prefer to donate 100$ for a Mark IV for A1ex :-)

Amazing!! Congratulations!

How long did you work on it?

Hi A1ex

The idea was that when i switch the camera into high speed mode (H) that it changes to save the pictures on the CF Card.
Changing during a burst sequenz is not needed :-)

I thought about doing it by myself...but my skills are bad (or don't even exists)

Priority is low, i agree with you. its just a nice feature ;-)

cheerio

Hello

I did not found any topic regarding to my wish...feel free to move or close this topic there already is one.

It would be nice if there is an option in magic lantern to chose automatically on which card it will record.
For example i like to record photos to the SD Card and Movies (or photos in high speed /burst mode) to the CF Card.

Of course i wish this feature mostly for my 5D iv...but yes i know... :-) maybe it's also usefull for other cameras and users

Regards
myown

WOW!! You do such a great work!! Congratulations and many, many many thanks!

I have a 60D and wanne test this 
Do i have to consider something special?

Interesting.  I am using a Komputerbay 1066x 256GB card and can record 1080p120 for over 6 minutes to CF Card on my 1DX Mark II (although Canon says only the CFast Card can do that).  Maybe the 5D Mark IV is just limited by the buffer?  IDK.

Interessting  How we can readout the buffer size of the mark iv without ML? And whats the buffer size of your 1dx?
I'm also not sure if the mark iv is able to process 120 full hd frames per second because there is only a single processor.
And not sure either if the fps override is doing the 120 frames in 1080p.

Having no peaking for me is just impossible, I hope ML will bring it to the 5D4.

What do you mean?

I made some tests with picture styles (not Neutral, i used my own) you'll get more details in dark or bright parts.
But it's not the same like raw Video :-P

4K mjpeg is in 4:2:2 on 5d mark iv

I did read the information about fps override. But i'm not shure about that: could there be a posibility to record full hd (1080p) with more than 60fps in h.264 with ml?

Ps: 1080p@60fps in raw....not a big hope for that. Depending on buffer size some seconds are possible. 1080p@120fps in raw-> no way :-)

Sorry  i can't. I don't have the right hdmi cable and no recorder either...

It is a HDMI v1.3 - but this supports theoretically up to 1440p (2560×1440) maybe there is a possibility for more than 1080p....
Because of the CF Card Speed for me is a 10 or 12 bit Video Mode more interesting 

First of all: these incredible guys have to hack the mark iv.

-> If you need some testers: me and my mark iv are ready