Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - f6l613

#1
things got even worse, now the rear display completly stopped working. This makes it difficult to diagnose what's happening...

I guess the motherboard of the camera is slowly dying - probably the best option is to get the camera repaired.

--alex.
#2
ok... also found it in the FAQ.

So i formatted one CF card and things changed:

Now I cannot continue shooting after an Err 70 - camera says busy (on top lcd and in the viewfinder). And this behavior is independent whether I use ML or the Canon firmware. I.e., now I have to remove the battery, switch on the camere, hope that there is no Err 70. If this works, the camera shows no abnormal behavior - strange!

#3
QuoteJust don't disable the bootflag in the camera
sorry I do not understand what this means... 
#4
Do I have the chance to "boot with a correct property block"  - where should that come from?

Does it make any sense to switch the ML version?

--alex.
#5
the only "positive" thing about it is that the err. 70 after reboot only appear in roughly one of three cases.

--alex.
#6
things got worse  :(

from time to time it is not possible at all to shoot with the camera after a "warm boot" (either wakeup from sleep or off-on); when I press the shutter button simply nothing happens. In addition the Display is not working, i.e., I cannot open the Menu... the top (LCD) display is working. Again, there are no crash logs.

in the log files there are some "new" error messages:

Quote
   5:    10.216 [STARTUP] startupEntry
   6:    30.112 [PROPAD] ERROR Not Exist Valid ComboPackages!!
...
31:    90.631 [PROPAD] ERROR SIZE SetPropertyData ID = 0x02070007(0)(4)
...
104:   112.813 [PROPAD] ERROR GetPropertyData ID = 0x02070008
105:   112.879 [PRP] ERROR NOT FOUND PROPERTY ID = 0x02070008 L:1102
106:   113.301 [PROPAD] ERROR GetPropertyData ID = 0x02090000
107:   113.340 [PRP] ERROR NOT FOUND PROPERTY ID = 0x02090000 L:1102
...
805:   548.223 [GUI] CurrentLensName[EF24-105mm f/4L IS USM]
806:   548.476 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
807:   548.570 [GUI] PROP_PHOTO_STUDIO_MODE (0)

complete logfile can be found at: http://www.kis.uni-freiburg.de/~albe/log000-160724.log

after a "reboot" (removal of battery) i can shoot as "normal" - some chance for an err 70, some chance for normal operation.

--alex.
#7
ok, some days later:

* I get the err 70 on 95% of all startups
* it does not produce a crash log, although it says "Saving debug log..."
* it's independent from the CF card used (tried 16GB, 4g and even a 1GB Microdrive)
* running CF card benchmarks does not lead to any error
* I can continue shooting after the err 70!
* I never got a second err 70 after the cam has booted

the situation is a bit frustrating, although I can live with it - I set the power down time to 30 minutes....

--alex.

#8
sorry, but qouting it does not work and I see no possibility to attach it...  you can grab it here:

logfile
#9
Hello,

since yesterday my 5dm2 shows Err 70's typically (but not always) after a restart, either due to auto-power off or power on-off via main switch. This error occurs independently whether I use ML or not.

This typically happens only on the first shot - subsequent shots typically work (obiously without restart).

I already tried:

- complete reset of Camera and Cx modes (via menu)
- external & internal format of CF card
- installed latest ML nightly build
- complete reset of ML settings

any hints?

here is a logfile:

QuoteSat Jul  9 09:34:55 2016