Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Licaon_Kter

Pages: [1] 2 3 ... 21
Reverse Engineering / Re: UHS-I / SD cards investigation
« on: May 18, 2018, 10:54:48 AM »
Keeping an eye on this too

General Development / Re: EOSM Shutter-Bug reboot
« on: May 18, 2018, 10:52:52 AM »
Keeping an eye on this too

Camera-specific Development / Re: Canon EOS M
« on: March 26, 2018, 11:10:40 AM »
@dfort @kiru
Aren't Sandisk cards known to be immune to this? maybe this model is too

Camera-specific Development / Re: Canon EOS M
« on: October 25, 2017, 10:59:58 AM »
Yes, even without a card my scroll wheel and the buttons on it are unresponsive. Clearing settings didn't do anything. Maybe I'll try updating the firmware to 2.03? Can I use ML with that version of firmware?
There is an experimental 2.0.3 version, but it's better to stay on 2.0.2.

Say that resetting CANON settings did not help?

General Development / Re: How to run Magic Lantern into QEMU?!...
« on: September 28, 2017, 12:43:40 PM »
Two ideas:

1. Maybe download GCC from the new site:
Code: [Select]
wget -c$OS.tar.bz2 && \
2. Why GCC 5.4.1 and not the latest (available there) GCC 6.3.1 ? I build with it and have not encountered any issues, but then again I only build for EOS M :)

7 Does MLVFS not cover your use cases?

Mac OS. How do you turn the MLV into DNG's? The referenced "mlv.dump.osx" download does not open on my Mac with  a "there is no app. set to open the document..." I tried MLRawviewer 1.4.3 but it crashes.

Had some issues too, indeed, too bad I deleted the logs/dmp by mistake though. :(

Trying to build EOS M (toolchain 6.3.1-q2-2017) commit cffeb48 yields this error:
Code: [Select]
mlv_rec.c:4183:5: error: implicit declaration of function 'raw_force_aspect_ratio_1to1' [-Werror=implicit-function-declaration]

The *official-experimental build* has this too:

/LE: Fixed

Oh right that one, indeed, it replaces mlv_dump, albeit it does not modify anything else IIRC, so yeah results might not be up to date.

Now, any problems running MLVFS (since that's the one that has developers and a future) ?

What part of "this is not developed for years" was unclear? Of course new MLV files would likely not work, since 10/12 bits and other stuff is recent.

Camera-specific Development / Re: Canon EOS M
« on: August 12, 2017, 07:57:31 PM »
I've been away from builds since early 2016. Have there been any big developments that are in either the nightly build or experimental builds that I should look into?

Two things:
1. Latest version is 1.4.3
2. this app is no longer developed (it's 2 years old), is the current MLVFS not working for you?

Do you use the Linux version of MLVFS by any chance?  :  )
I have it compiled (in the past) but I'm not up to date.
I'll update the source and try to note the steps. ;)

Jusy wondering if MLRawViewer can 2x2 chroma-smooth dngs during the conversion process. If so, how does one make it do this?
Any reason you did not switch to MLVFS yet?;topicseen

Camera-specific Development / Re: ML on EOS-M2
« on: July 02, 2017, 06:40:16 PM »
Which buttons are missing? appears to be working on the EOSM though I have no idea how to work it.
Looks ok now though, you can change lower limits with left-right and upper values with rotating wheel, strange that (IIRC) this was not possible in the past, albeit the sourcode was not modified since forever.  :-\ ::) :o

Camera-specific Development / Re: ML on EOS-M2
« on: July 02, 2017, 12:22:36 AM »
But you can't use anyway on M/M2 because you don't have (one) more hardware buttons, right?

General Development / Re: Stack trace (aka backtrace) in crash logs
« on: July 01, 2017, 05:13:46 PM »
Really useful. Thanks.

General Development / Re: Experiment - Dynamic My Menu
« on: June 29, 2017, 06:30:48 PM »
This works nicely indeed.

One glitch that I saw, I enabled DualISO, set recovery ISO, set normal ISO, whatever shoot, later went to MyMenu to toggle it off but I could only see the sub-menu (where you set normal ISO and recovery ISO), so I had to go back to the main menu, turn it off from there and then coming back I had DualISO is MyMenu too.

Camera-specific Development / Re: Canon EOS M
« on: June 26, 2017, 11:12:45 AM »
Not a ML issue but..

How does one treat "Change battery pack" error? (I guess this is the message, I get the localized text)

Had it at 100%, shoot a bit yesterday (still fullbar), forgot to charge it last night, but I put it in the charger in the morning for 15 min, charger led still orange.

I had to go, put it in the camera and went outside.

After more than an hour of walking outside in sunny weather, trying to take a picture I get the surprise messag e with a red empty battery icon AND the ML message of "bad shutdown modules not loaded" (as expected).

This happens without SD card too.

I don't have a collapsible 15-45, just plain 18-55 and 22.

Original Canon battery that came in the box.

/LE: False alarm, got it charged up to green and now it starts fine. Got me scared there for a bit. :)

Camera-specific Development / Re: Canon EOS M
« on: June 23, 2017, 11:12:16 AM »
> 1) The video crop mode setting isn't remembered by the camera

That's there for a reason:

Oh come on, using a "letter in Linux? :)

"mount point" = /home/yourname/mymlvfsfolder/

Camera-specific Development / Re: Canon EOS M
« on: April 29, 2017, 09:54:17 PM »
Did you reset Canon settings too?

Reverse Engineering / Re: ProcessTwoInTwoOutLosslessPath
« on: April 01, 2017, 02:37:50 PM »
WoW  :o

Pages: [1] 2 3 ... 21