Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - kosmarnik

#1
Camera-specific Development / Re: Canon EOS M
October 06, 2017, 10:36:30 AM
Would some of the devs  please take a look at the Advanced bracketing issue?
I't doesn't work with audio remote shot (as described in my earlier post). It also has issues when used with the intervalometer.

I grabbed the source to take a look at shoot.c, but it's a bit too much for me to grasp at a glance.

#2
Camera-specific Development / Re: Canon EOS M
October 03, 2017, 09:02:20 PM
Quote from: russellsnr on October 02, 2017, 08:56:40 AM
I did reply to this in the other posting on the same subject by the same OP in the GH Q/A section but if it helps here.
Did a quick test also with the 'M' and got in first 6 images at 3 stops. 320,320,40,40,40 and 40 second try I got 320,2500,40,40,1.6 and 1.6
Russ
Yeah, saw that one, but as it may be an EOS-M specific issue, it might be useful to have it here too.
#3
Quote from: russellsnr on September 27, 2017, 08:03:10 AM
Did a quick test also with the 'M' and got in first 6 images at 3 stops. 320,320,40,40,40 and 40 second try I got 320,2500,40,40,1.6 and 1.6
Russ
So it's seems like it is confirmed that it's a bug?
#4
Camera-specific Development / Re: Canon EOS M
September 24, 2017, 03:12:40 PM
Anyone else having issues with Advanced bracketing?
My setup:
EOS-M with the latest nightly (magiclantern-Nightly.2017Sep15.EOSM202)

Manual mode, manual lens, 6exp 3ev from 1/4000.

Most of the times I get the expected exposure range:
1/4000
1/500
1/60
1/8
1"
8"

But not always.
Sometimes I'll even get more than 6 shot.
If I use Audio remoteshot (audio gain set to manual), I never get the expected range, just a bunch of random exposure values that changes every time:
1/4000
1/4000
1/500
1/500
1/500
128"

Or
1/4000
1/500
1/60
1/8
1/4000
1/4000

Or
1/30
1/4
1/30
1/30
127"
10"


Seems like a bug in the Advanced bracketing module, and using Audio remoteshot makes it worse.
Would someone please try it out, using at least 5 exposures?
Thanks!
#5
Trying to do a shoot using only the Advanced bracketing and the 2 sec delay.
It seems sometimes even the Advanced bracketing will cock up.

I just got exposure values all over the place, and it shot more than 6 shots.
#6
Canon audio gain is set to manual.
Audio remoteshot is set to 20dB.

If I trigger with the shutter button, I get the expected exposure values:
1/4000
1/500
1/60
1/8
1"
8"

When triggered by Audio:
1/4000
1/4000
1/500
1/500
1/500
128"

Or
1/4000
1/500
1/60
1/8
1/4000
1/4000

Or
1/30
1/4
1/30
1/30
127"
10"

So just random exposure settings.

Would you please do a quick test to confirm?
#7
Hi!
I can't get Advanced bracketing to work properly when using Audio remoteshot to trigger.
Using the shutter button, Advanced bracketing works as expected, say 6 exposures at 3 EV, but when triggered by Audio remote shot I would get exposures all over the place with half of them being the same.

I has been happening with a lot of builds for the last couple of years, but I found a workaround, using the Canon AEB, but it only supports 3 exposures 2 EV apart.
But now, I need the Advanced bracketing, but also remote triggering.
As I'm using the EOS-M with the latest nightly (magiclantern-Nightly.2017Sep15.EOSM202), Audio remoteshot is the only way to remotely trigger.
Using a manual lens, no AF in manual mode.

Can someone please try and confirm the bug? Please use at least 5 exposures.

Thanks!
#8
Camera-specific Development / Re: Canon EOS M
May 26, 2016, 03:26:38 PM
Shoot preferences: pics at once set to 3
Using the Audio remoteShot, only 2 pics are taken.

Weird. I set it up to 4 pics at once, it takes 3.
Testing some more, and it does 2-3 pics.
Inconsistent.
Seems to be related to shutter speeds.
Set it at 5 pics per shot, so far it does 3, but remains to be seen if it will actually be reliable.

#9
Camera-specific Development / Re: Canon EOS M
May 26, 2016, 03:10:52 PM
Hi, I'm having issues with Advanced bracketing.
I set it up for 3 x 2ev, +++ , Exposure, no delay, no iso shift.
The results are chaotic.

Test:
Drive mode set to single:
2 photos, 0, +2ev, exposure left untouched
4 photos, 0, 0, +2ev, +4ev, exposure changed to 0+2ev
4 photos, 0, 0, +2ev, +4ev, exposure changed to 0+2ev
2 photos, 0, +2ev, exposure left untouched
4 photos, 0, 0, +2ev, +4ev, exposure changed to 0+2ev

At this moment I remembered I should use the latest nightly :-
Switched to Nightly.2016May16
Getting this results:
2 photos, 0, +2ev
3 photos, 0, 0, +2ev
2 photos, 0, +4ev
3 photos, 0, 0, +6ev

Everything is set to default settings.
4 photos, 0, +2ev, 0, +4ev

Such behavior makes the ML bracketing useless for me.





#10
Camera-specific Development / Re: Canon EOS M
August 29, 2015, 12:18:50 PM
I'm a bit silly, but how does one record video with a manual lens (using a mechanical lens adapter)?

Silly indeed. Under Custom Functions (C.Fn), select no. 7 (C.Fn IV): Operation/Others Release Shutter w/o lens, enable.
#11
Camera-specific Development / Re: Canon EOS M
March 10, 2015, 03:59:41 PM
Quote from: Walter Schulz on March 10, 2015, 03:42:11 PM
The one compiled by you.
I was under the impression that if was merged in the main branch from which the nightlies are compiled?

#12
Camera-specific Development / Re: Canon EOS M
March 10, 2015, 03:06:11 PM
Hi,
using magiclantern-Nightly.2015Mar03.EOSM202 I still get only old silent pictures, no FRSP.
What version has the FRSP?
#13
Hi!
I installed ML just fine. 2.02 FW, magiclantern-Nightly.2014Jul30.EOSM202.

All video and interface tweaks work fine, except I can't shoot regular photos.
In photo or intelligent photo mode the the camera just focuses but won't fire with a full press.
If I turn on the 'touch to shoot' it will try to shoot and lock up the interface, no button or screen presses work, only taking out the battery.

Any ideas?
Using a sdcard without ML it works fine.
I can post dumps/logs later when I get home.