Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - criz_a

#1
Archived porting threads / Re: Canon 6D
April 29, 2015, 11:22:24 PM
Why don't we do a fundraising to buy a Canon 6D for one of the main developers here? I mean 35 people pay 40 bucks and it's on! Is it because of Tragic Lantern, that nobody has done it? If enough people respond to this post even I will consider starting a $ collection! Best Regards.
#2
Tragic Lantern / Re: Tragic Lantern for 6D
May 08, 2013, 10:26:22 PM
Well, thanks for the quick answer. Now my last hope was when I put the SD card into a compact camera from Panasonic and connected it to the PC. Now I could see the ML files, but the the card was read only, how is that possible? (I checked the lock switch already.)
#3
Tragic Lantern / Re: Tragic Lantern for 6D
May 08, 2013, 10:06:08 PM
Hi, I am on vacation and would like to copy the new files to my SD card, to fix the focus confirmation.

However, I have only my 6D and the usb cable with me, and access to a desktop computer without card reader.

Is there a way to overwrite the old with the new files? As you might know, when connecting the camera, it only shows
the picture files....Any ideas how to do it? Thanks.
#4
Tragic Lantern / Re: Tragic Lantern for 6D
March 23, 2013, 05:01:05 PM
Global drawing is all on. I also tried with a different SD card. And last but not least I reset the camera settings and now it WORKS again!  8) Thanks anyways..

EDIT: Could you plese tell me where this alpha blend setting is? Because now it jitters again..
#5
Tragic Lantern / Re: Tragic Lantern for 6D
March 23, 2013, 03:40:51 PM
The jittering was gone after I deleted the config file, and I've had no problems since then. I didn't even change any settings in ML. It's just that focus peaking doesn't work any more, well I just noticed that all overlays are gone..? And yes, the canon menu is off in live view.
#6
Tragic Lantern / Re: Tragic Lantern for 6D
March 23, 2013, 01:46:08 PM
Hi, I run ML on my 6D as well. First I had a jittering when using live view, so I deleted the config file, after that ML was running fine. I was only using the focus peak function, but after a couple of days it stopped working, the red/blue points don't appear any more while focusing in live view, and I have no clue what it could be. I tried to delete the config file again, and even reinstalled ML, but focus peaking still doesn't work. The ML version I am running is the one from the zip, built 03-01...
#7
Tragic Lantern / Re: Tragic Lantern for 6D
March 06, 2013, 11:17:38 PM
Quote from: xcreativ on March 06, 2013, 11:04:18 PM
Most importantly, this filter - the mechanical implementation of the camera, which prevents its parts. First, it reduces exposure to some level. In their advertising on Vimeo, they refer to the non-permanent cloud of light conditions. However, why the clouds covering the sun is, when there is a filter test, and not without? Secondly, I think the filter to reduce the sharpness.

Yes, I noticed it, too. The picture got darker with the filter. Didn't like the outcome anyway...
#8
Tragic Lantern / Re: Tragic Lantern for 6D
March 06, 2013, 09:52:29 PM
Quote from: gravitatemediagroup on March 06, 2013, 09:49:50 PM
yeah, I knew the 6D was pretty bad news when I seen moire IN DIRT!!! no BS....DIRT

oh, but don't worry, $400+ more for an adapter (that much closer to a MK3) and you can be moire free.
;D

but wait, what adapter?
#9
Tragic Lantern / Re: Tragic Lantern for 6D
March 02, 2013, 08:15:23 PM
Thanks. Maybe tell coutts to put the link into the first message of the thread.
#10
Tragic Lantern / Re: Tragic Lantern for 6D
March 02, 2013, 07:30:53 PM
Ha! I just noticed that I don't know where to download it from? It's not on the nightly build page...
#11
Tragic Lantern / Re: Tragic Lantern for 6D
March 02, 2013, 07:02:26 PM
Quote from: Hb on March 02, 2013, 06:39:56 PM
Hi all. I have a 6D, I have read this thread mostly and I have the will to support the port for this model. What should I do now?

I am not sure, and let somebody confirm this before you start, but you could download the developer version, run it on your 6D and use it, then report errors when you've found any..!
#13
The sounds are coming from the sensor auto cleaning function. Don't worry, this is absolutely normal!
#14
Tragic Lantern / Re: Tragic Lantern for 6D
February 25, 2013, 12:13:42 PM
Quote from: DTSET123 on February 25, 2013, 01:31:33 AM
I still dont know how to donate! There used to be a "donate" button but now i dont see it.

[10:47] <yoyoyo> where has the donate button gone?
[10:48] <yoyoyo> there is none on the hp
[10:56] <SDX> we don't need money at the moment
#15
Thanks to all for still working on this port! :-*
#16
Quote from: TatoMCSE on October 22, 2012, 08:28:13 PM
Can someone point me to the right direction with the install issue.

Format the CF card and copy ML, take out battery and charge it! Try again :-)
#17
I would love to have this! Could it be possible at all? Thanks..
#18
I want to say thanks as well! I am just upgrading to a 5DII but this hack is still awesome!

To see the shutter count would be a very useful feature for me at the moment, so I can check it before I sell my 5D.. :-)
#19
I will be able to go to a canon service center, but unfortunately only around Christmas time, so except traeuble goes before that, we have to be patient  ::)
#20
Hello, I have the same "issue", the first number in the shutter count row is lower than the second after the =, which may be the total sum of actuation. After the second number then there is the +- sign(s) and then the live view count.

I don't think ML is counting backwards or something, couldn't it be rather the case that the first number before the =, and the second are interchanged? If yes, why is it like that?

If there is a way I can help to clarify the "bug", please tell me how!