Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - psantia

Pages: [1] 2
1
General Help Q&A / Re: Framing crop mode x 5
« on: April 28, 2018, 12:30:05 PM »
thanks good idea...and it worded the image is centred even on the small hdmi monitor I ve..even if on the monitor gets much bigger but it is ok to at least frame a bit better...
dont know if I can control the hdmi out...I ll see
thank you

2
General Help Q&A / Framing crop mode x 5
« on: April 27, 2018, 05:10:00 PM »
Hi ..I use 3k 1:1 crop mode with a resolution of 2560x 1440 that becomes 2560 x 1320 16:9 when pressing the x5 ..
the problem is that when I frame the image is not centred .the centre move to the right on the camera monitor and also on an
external monitor ...the 2560x1440 seems more centred but I do not get the image on the hdmi monitor only when I press x5 I see the image on the monitor
even if enlarged .

Hope I was clear....does anybody know how to have a centered image with the x 5 option?

thanks

3
Raw Video / crop mode 3,4 k monitor
« on: January 19, 2018, 08:45:07 PM »
hi, is there a way to see what are you really filming with an external monitor...in 5x,
also for focus that for me it is alway a bit out..
any help

thanks

4
General Help Q&A / Re: latest built for canon 5d mark iii
« on: January 13, 2018, 08:59:20 PM »
sorry but I do not understand..

'moreover I think that experimental built page has to be destroyed...'


so can i download from experimental built..the 4 k option? or is not safe!?





5
General Help Q&A / Re: latest built for canon 5d mark iii
« on: January 13, 2018, 08:45:35 PM »
I ve understood that the builts for slowmo and 4 k  were delated...

I don t speak current latin..so to record 4k and slowmo fhd what do i have to do?

thanks

6
General Help Q&A / Re: latest built for canon 5d mark iii
« on: January 13, 2018, 08:24:18 PM »
so we can not use the 4 k option or the slowmo..? :-X

7
General Help Q&A / latest built for canon 5d mark iii
« on: January 13, 2018, 06:58:42 PM »
Hello ..
am a bit confused , cause I cant find the 4k options and the fhd 48 fps...for canon 5d m3
I mean I ve downloaded the final built on the nightly lastest builts but was no able to see the 4 k option
and the slow motion one..

sorry am kind o new to this so ..

anybody can advice thanks

8
General Development Discussion / Re: Canon 6d latest built
« on: January 11, 2018, 03:07:43 PM »
ok since I ve seen on the builts that was not tested I did not uploaded.,..

sincery last time I uploade ML on 6d the camera stopped working..canon have to change the electronic power something....

9
General Help Q&A / canon 5dm3, 4k dng file 1:1
« on: January 10, 2018, 08:56:13 PM »
Hi,
am looking for some 4k raw files to download of the latest built for canon 5d mark iii..
any help?

*just like to see if I manage to edit them

10
General Development Discussion / Canon 6d latest built
« on: January 10, 2018, 08:49:25 PM »
hi,
is there a canon 6d recent built that works well???

thanks

11
General Help Q&A / Canon 700d 4k?
« on: January 02, 2018, 06:48:10 PM »
Hello, who knows which are the resolutions and frame rate of the last built for the t5i / 700d?


thanks

12
General Help Q&A / Re: canon 6d focus x 4 function +
« on: December 29, 2017, 10:26:20 PM »
ok i see... thanks

13
General Help Q&A / canon 6d focus x 4 function +
« on: December 29, 2017, 11:48:12 AM »
Hello,

is it possible to use Canon 6d with the x 4 switch + to make higher  resolution...I heard might be too much and dangerous for the sensor that may crash ?!

I ve tried once but I saw on the monitor in strange black and white with flicks ..so I stopped using it...

14
General Help Q&A / Re: canon 50 d max resolution ml
« on: December 28, 2017, 12:53:33 PM »
okay thank you

15
General Help Q&A / canon 50 d max resolution ml
« on: December 27, 2017, 11:41:03 PM »
hello, i did not understand if with the last built the 50d can do full hd at 30fps...no crop
is there a recent cameras chart with all the res.?

thanks for letting me know

16
General Help Q&A / Re: Canon 5d mark II latest built
« on: December 24, 2017, 05:25:38 PM »
okay thanks ..I will   try to wait to remove the card

17
General Help Q&A / Canon 5d mark II latest built
« on: December 24, 2017, 04:14:50 PM »
I tried the ML Dec 17 for canon 5d mark II  , and all the time I use it. after that I take the card out to transfer the footage, but if I turn on the camera this does not turn on..even putting back the cf with ML.
To restart the camera I have to take the battery,lens and card  off , press the shutter button for at least 15 seconds ..insert the lens the battery the card that has to be formatted...and than the camera starts
again...I am happy with the result with ML but am afraid to damage the camera going on like this..
On ML I upload only the raw video mlv.

Anybody has the same problem?

thanks for letting me know
ps

18
Raw Video / Re: Canon 5d mrk III 50 fps 1920 x 1080
« on: November 30, 2017, 09:35:52 PM »
ok i see....

sorry but what is it 3x3 binning ? ???

19
Raw Video / Re: Canon 5d mrk III 50 fps 1920 x 1080
« on: November 30, 2017, 05:38:47 PM »
ok thanks so it is possible ..so no full frame but crop mode ..right?

20
Raw Video / Canon 5d mrk III 50 fps 1920 x 1080
« on: November 30, 2017, 04:18:53 PM »
Hello i would like to know if with latest built the Canon 5d mrk III can do  50 fps 1920 x 1080 full frame in raw continuously ?

I dont have anymore 5dmark3 so if anybody can let me know.thanks




21
Toshiba 1066x claims to have 150Mb\s write speed, Transcend 1000x also might be worth checking as it should be capable of ~120Mb/s

I 've bought trascendent 32gb 1000x but am not able to record full hd without crop ,as well on the lexar x 1000 and the komputerbay  x 1000.

So the only chance are the new toshiba 1066x or komputerbay x1050  but who knows if  the can handle with canon 5d mr3 full hd 30 p continuous?!on paper they say yes..?!

anybody tried one of those...?

It is just matter to have the right CF that writes above 100 mbs if we could use SSd there were no problems for of buffering,stopping, missing frame..etc

Hopefully there 're going to be in the near future CF cards that writes 120 mbs for real...but not for now




22
Hi .sorry but I did not find a link to download mlv mystic for mac os x?

does anybody know?! thanks

23
where did you buy your cards? ebay?
If I was "frustrated" with magic lantern, I would  buy blackmagic cinema camera and call it a day. Nobody's here guarantee 100% working firmware.  Read forums, do your search and you'll find the info you're looking for.
As a forum member I just appreciate what A1ex and other guys do for us. If it does not work for you  just go back to factory setting...


Hi, yes one ebay and one amazon, well am not saying Magic Lantern is bad . it is a very good thing and I do appreciate very much the work done. it' s that i 've find it difficult to record video.and to understand everything ..it is not easy..I have the camera stopping all the time  in 1920x1080..unless if I crop a lot , but i dont like crop so much ..depends what is it for.I can soot only 1729x 1008...The thing is that if i have to shoot something for work I would be very uncertain if to use raw with the last built 1.2.3 it is not so stable and i think needs cards to go with that does not exist for the moment.When I switched from canon 5d mrk 2 to 3 I thought was good think to do but actually  the 5dm2 was better to use it for video since there is a stable firmware...I did not get it first..in case I can shoot with the camera firmware no problem..it is I did not mind shooting raw..to have a bit more of film look.But we will see maybe in the next months there is going to be a more stable firmware for canon 5d m3.More over I can not use mlv with sound because on my I mac with mac os 10.9.2 there is no converter to dng or pro res.

But we will se..I might be lucky and find the right resolution...I am just new to this.. before I had a hached gh2 also..and was very good.,...


24
I ve tried the firmware on canon 5d m3 but ma able to use it only at 1728x972.. with superior resolution the recording stops and I have a trascendent and lexar 32 gb 1000x..
probably I am doing something wrong but am a bit frustrated..I an not saying it is bette blackmagic cinema camera but at leat that its simpler..

any advice?

25
The viewer for Mac OS X dose not work on the late Mac OS 10.9.2,at peast for me..it s a shame so no audio,for now

Pages: [1] 2