Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Wartburg-Entertainment

#1
How many seconds you can save in 2240x1200?
With a 600x card?

Greeting
#2
I have after much try now following adjustment for me as the best.
AETTR:
Trigger Mode: Auto-Snap
Exposure Target: -0,5EV (indoor)
Highlightignore: 0.5%
Midton and Shadow SNR limit: OFF
Link to Dualiso: OFF
Link to Canon Shutter: OFF

DUAL-ISO:
Recovery ISO: + 3EV

So is it then before actually the result after converting with CR2HDR bright images.
This can be dan pull in the exposure down.
Disadvantage is a bit that all images are dual-Iso.
So it's a bit time consuming to edit.
But the result that counts.

greeting
#3
I think the approach of Garry goes in the right direction.
Is the dual-link and then make off with AETTR two images.
A picture in the dark area of ​​the image and an image in the bright area.
Remember ISO and then adjust manually. Will try today the times.

Thank you
#4
I can adjust what I want. After the post process I have dark images, I need to lighten in Lightroom.
This of course created a lot of noise. What am I doing wrong?
It can not be right but that to use AETTR to afterwards to make dark images bright.
Currently I am working with the Lightroom plugin.
Problem persists even at default settings in the camera ...

regards
#5
Share Your Videos / Re: dual iso 2,5k movie thread
September 23, 2014, 06:20:33 AM
Hello,
I can make me some hope for the 7D?

regards
#6
Hi there,

since the last builds (28-30.07) formatting does not work in the camera.
It will delete all files except the settings-folder.

greeting
#7
Hello people,

I do not understand the world anymore:

1 I go to the NightlyBuilds
2.I go to 7D 2:03
3 I read the changelogs
4 I read various improvement in FPS
5 I invite the Nightly at the camera
6 I have no FPS override on my 7D  >:( >:( >:( >:(

Can you enlighten me?
#8
Hello,
how can it be that my 1.5.beta3 makes no CDNG,
but nut DNG?
At least recognizes Premiere not the files.

greeding
#9
When at last comes "frames override"?
The Nightly of Tragic has not all modules. (DUAL-ISO)
So that makes no fun to strike up there on the Cam.

Greeting
#10
Yes deutsch, :)

in den letzten Versionen war es immer so, dass ich pro MLV einen Ordner angelegt bekam. Das war super.
Seit 1.4.9.6 und 7 entsteht nur ein Ordner von einem MLV File.
Das Programm arbeitet aber munter weiter und scheint die anderen CDNG's zu erzeugen, aber im Ordner sind nur die Files von einer MLV-Datei.
Habe noch nicht gecheckt von welcher - erste oder letzte in der Batchliste.
Windows 8!!


Gruß aus Thüringen

EDIT: Es sind die Dateien vom letzten MLV-File in der Batchliste!! Es werden die vorgehenden überschrieben. Deshalb kann ich sie nicht finden!
#11
Hello Chmee,

since the last two versions of the app does not create more folders.
It used to be that I got MLV per file, create a folder.
Now creates a folder and it contained only by a MLV the CDNG.
The others are generated, they are not found. (overwritten)

greeting
#12
Raw Video Postprocessing / Re: The CinemaDNG Discussion
February 18, 2014, 06:19:22 AM
@chmee: Thank you anyway, even if it is not good news.

@reddeercity: Thanks for the idea. I also think that it is currently the best workflow.
#13
Raw Video Postprocessing / Re: The CinemaDNG Discussion
February 17, 2014, 09:32:57 PM
@ chmee

Can you please help me with my Premiere CC CDNG problem.
So the MLV files all come from a 7D with last Tragic Lantern.
I can open the DNG in Premiere, but the settings of ACR are not included in Premiere.
And now the main problem, as already described here I have only completely pink in the highlights and in the over-exposure.
Today I again several MLV transformed with the new 1.4.9.2. - No improvement. Is it Windows 8.1 or Tragic Lantern or or ...?
#14
Duplicate Questions / Re: Magic Lantern for 7D
February 16, 2014, 01:50:58 PM
-> Tragic Lantern
There is a new nightly build of Magic Lantern.
But I get so into being no RAW recording.
#15
Tragic Lantern / Re: Resolution 2280x possible???
February 16, 2014, 01:48:33 PM
Hello,

The Magic Lantern resolution 2240 is now included in the RAW module.
Is this now possible for MLV?  :D :D :D :D
Or is that even a bug, because with Magic Lantern and the 7D no work is currently possible.

regards

#16
Raw Video Postprocessing / Re: The CinemaDNG Discussion
February 16, 2014, 11:34:46 AM
I've always gamma 1 and level the problem only in Premiere.
Even in the media browser, the small preview files are all pink.
Will now test the build of Magic Lantern nighly, let's see
what it is so new insights there.

regards
#17
Tragic Lantern / Re: 7D Raw Thread
February 16, 2014, 10:54:04 AM
Yes, it crashes when you start in Live View with new MagicLantern.
Make Live View from doing your setting and then back to live view.
I think how it works, but can not even try - all batteries are empty. :o
#18
Raw Video Postprocessing / Re: The CinemaDNG Discussion
February 16, 2014, 08:13:20 AM
CDNG's Without Party Mode? Really?

Edit:no Partymode - brings no Improvement.....
#19
Tragic Lantern / Re: 7D Raw Thread
February 16, 2014, 07:52:26 AM
I could not believe my eyes when I could make Magic Lantern on my 7D yesterday.
And I've been looking forward so much more than I could select the resolution 2240 in the RAW module.
Will was here wish? If the resolution even in the MLV module?

greeting
#20
Raw Video Postprocessing / Re: The CinemaDNG Discussion
February 16, 2014, 07:44:29 AM
Hi guys,

I use on my 7d currently still Tragiclantern because MagicLantern is not stable.
And I have version 1:49 of RAW2CDNG.
And believe me, I've got all the settings through 10,12, 16bit - with and without Tiff Model.
Only Premiere shows this pink highlights!!!

#21
Raw Video Postprocessing / Re: The CinemaDNG Discussion
February 15, 2014, 06:53:45 PM
Hello people,

I have no problem with RAW2CDNG, as it is a really great app.
But I have still the problem with the pink highlights in Premiere CC 7.2.1 :-(
And strangely, only in Premiere! In After Effects, and in the ACR Pink higlights are not seen.
What must adjust in Premiere?
It does not matter what I set in RAW2CDNG, only In Premiere I have the Pink Horror. :-(

greeting
#22
Tragic Lantern / Resolution 2280x possible???
February 06, 2014, 06:12:37 AM
Hello,

I am of the opinion that the 7D 2.5 K does not create satisfactory.
That's why I wanted to know if a resolution 2048-2512 it would be possible to push in between times? 2280?
This would then in the post just as 12.5% are scaled and not 20% as at 2048x ...
I fell in love since Magic Lantern RAW in the widescreen and would like to work in this direction.

regards
#23
Tragic Lantern / Re: 7D Raw Thread
January 30, 2014, 07:54:51 PM
Do I have a blackout, or not running the Crop mode?
Have updated today and just do not get out. ;-(
#24
General Help Q&A / Re: Where is AETTR?
October 12, 2013, 05:06:49 PM
And that is different from the 7D?
There is in the "nightly builds" yet AETTR.
7D will be my next camera.

Greeting
#25
General Help Q&A / Where is AETTR?
October 12, 2013, 06:55:47 AM
Since about 1-2 weeks there in the "nightly builds" no more AETTR module for the 600D.
When I insert the module manually I get error messages?
AETTR is now always on, because in live view I see above ETTR?
Did I miss something important here?

Greeting