Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - hdclip

Pages: [1] 2
1
You are exporting DNG and not Prores...the prores whit curve and the dng without...it´s not?

2
Hi Baldand!!!!maybe a Histogram or something like that to view the real exposure????

3
NVIDIA GeForce GTX-460
What do you think Baldand????another Nvidia... ::)

4
I finally figured that out :D Thanks though!

Okay, next quirk (because it can't be THAT easy, right?)

It exported *this*...
(the color should have been the same as in my last posted image)



Which Graphic card do you have???

5
Could be... I'm using an Nvidia GeForce 560M.

I try with Nvidia geforce 210 and geforce gtx 295...

6
I get the same exact thing as hdclip has reported.  Both the sRGB and Rec709 export to MOV have blue blotches (with some green blotches) in the dark areas with every clip I tested.  Highlights seem ok.   LOG, Linear, HDR export fine.  The clips were shot with the latest nightly build for 5D3 using MLV.   I had already downloaded the latest NVIDIA drivers.    I also tried the use the experimental 0 key prior to export and the issue remains either way. 

I can provide an MLV file that shows the issue if it helps... just let me know how you need me to send it to you.




Maybe Nvidia geforce problem????
Nice Parrot!!!! ;)

7
@hdclip
would you support our samples-library with such a 7d-file? please read here:
http://www.magiclantern.fm/forum/index.php?topic=11899.0

Of course, I will do!!! ;)

8
Here every curves test....



9
Which version of MlRawViewer? Linear and HDR modes look ok?

It sounds like it might be a GPU issue. Make sure you have the latest NVIDIA drivers you can get.

Hello!!!!is the last version of MLRAWviewer 1.1.6 and with HDR work´s fine...I dont use the linear curve.I try the Rec709 and Srgb curves.I like very much the Srgb curve.
I change the graphic card and it make´s the same issue.

Thankyou very much and congratulation´s for the software, is very very very very nice!!!!!! ;)

10
Hello Baland!!!! I have this problem when i apply Srgb and Rec709 curve...there are points yellow and blue in movement in the frame, in this picture is not very apparent but when I play the footage is very visual...I have 7d camera with the last build 24/05/2014, windows 7 and nvidia geforce gtx295 graphic´s


Thank´s!!!!!!!!


11
Hardware and Accessories / Re: DSLR Rig recommendations
« on: April 04, 2014, 04:01:07 PM »
I use Redrock Micro Cinema/Studio Rig very nice follow focus, but not cheap. :)
The Mattebox is more expensive than the 7D secondhand.... ;)

Nice Accesories!!!!!

12
Hardware and Accessories / Re: Lexar 1000X 32Gb K.O
« on: March 13, 2014, 04:22:52 PM »
And this is for 20Fps... 2048X1024 2:1 is continous recording...

     [img=http://img254.imagevenue.com/loc202/th_720611498_foto_122_202lo.jpg]
        

13
Hardware and Accessories / Re: Lexar 1000X 32Gb K.O
« on: March 13, 2014, 04:15:37 PM »
You can download video proxy here... http://we.tl/L08MOl0Mum

A lot of pink Frames...


14
Hardware and Accessories / Re: Lexar 1000X 32Gb K.O
« on: March 13, 2014, 04:09:45 PM »

15
Hardware and Accessories / Re: Lexar 1000X 32Gb K.O
« on: March 13, 2014, 04:00:24 PM »
hdclip,

Since you received a 1066x from Lexar, can you do me a favor and see if you can do 2512x1068 2.35:1 in crop mode? See how long you can record at 23.976 FPS over ride.
I can only achieve continuous recording at this resolution at 17 FPS. Maybe that card can do better at 20 fps.

Also please try, 2048 x 1024 2:1 at 23.976. With a 1000x card I can only get around 50".

Your test could answer if the 7D can still benefit from faster CF cards or weather its already at its peak at 1000x.

Thanks in advance.

Off course!!!!checking...!!!!one minute...

16
Hardware and Accessories / Re: Lexar 1000X 32Gb K.O
« on: March 11, 2014, 11:39:15 AM »
I finally resolved the problem, I sent the card to the factory and have given me a new one.
not only that but I sent one 1000X and have received a 1066x ...
Now I guess I will make the autopsy results but unfortunately will not know anything.

17
Hardware and Accessories / Re: Lexar 1000X 32Gb K.O
« on: March 09, 2014, 05:34:06 PM »
have you tried another card reader ? or maybe format the card in camera :)

Yes I try two card reader but doesnt signals of life, thank´s!!!!

18
Hardware and Accessories / Re: Lexar 1000X 16Gb K.O
« on: February 25, 2014, 10:27:02 AM »
You contacted Lexar for warranty, i am pretty sure they can give you better answers/solutions.
Also, i see no question marks.

I see you have many post but little dialogue, thanyou for your answer, if someone else happened and I would like to know if there is any solution working well, the card is used only with RAW_REC Only video no Photo, maybe is not broken, thank you very much.

19
Hardware and Accessories / Re: Lexar 1000X 16Gb K.O
« on: February 25, 2014, 09:48:00 AM »
So?
I had rice and fish for lunch.
you think that's a good answer? expected any suggestions of what may have happened or help, listen to what comes ... this is not a forum for consultation of Dining ...

20
Hardware and Accessories / Lexar 1000X 32Gb K.O
« on: February 25, 2014, 09:31:46 AM »
Yesterday i take some RawVideo's and when i go to download to the computer, the compaqFlash doesn't appear, not on the computer and the camera even  doesnt starts with the card inside, I have spoken with Lexar for warranty but the  the issue has left me worried

21
Raw Video Postprocessing / Re: 7D NOISE PROBLEM
« on: February 19, 2014, 11:18:38 AM »
ISO 800 is the last useful ISO on the 7D.  So unless you can increase exposure (through shutter/aperture/scene luminance), then your SOOL.

Very interesting Link!!!!! thank,s

22
Share Your Videos / Comercial Raw7D
« on: January 27, 2014, 11:53:36 AM »

23
Raw Video Postprocessing / Dng2Tiff and Tiff to .Mov
« on: January 22, 2014, 02:05:03 PM »

Hello, someone can said me if in the process of conversion of tiff sequence to Mov in QuicktimeplayerPro, the 14Bit's  of the original tiff sequence and the space color is respected?Or is 8Bit and Rec709?

24
Raw Video Postprocessing / Re: Pomfort ClipHouse
« on: January 22, 2014, 01:59:11 PM »
Expensive? compared to LR, ACR from PS, or AE its decent IMO...............ahhhhh WINDOWS PLEASE!...Sorry couldnt help myself it. It looks so fun and simple. And the potential to handle native ML RAW. Awesome!
? ? ? ? ? ?

25
Raw Video Postprocessing / Raw postproces....PomfortCliphouse
« on: January 15, 2014, 04:19:26 PM »
Hello!!is there a tool like PomfortCliphouse but for Windows????????
Thank´s!!!!!!!!

Pages: [1] 2