Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - far.in.out

Pages: [1]
1
Camera-specific discussion / Re: Canon 50D
« on: April 01, 2017, 09:39:02 PM »
Does 5D2 have the same issue with cropped RAW video not being centered like 50D has? Does 5D2 has the same MLGrayscale preview mode, do all cameras have it?

Can the MLGrayscale preview in cropped mode (on the 50D or on all cameras) be made less ugly?
Can we scale the actual raw frame that is being recorded (in crop mode) to 50% (or 25%) and center it to available screen area? If the resultant preview frame resolution doesn't match the available screen area - crop or letterbox it but still center it to available screen area - this way it's still "close" to 100% frame coverage and there is less scaling distortion and no aspect ratio distortion - you can actually see what you are filming.
Wouldn't it be better like that?
I'm also wondering if what I've described above can be done NON-greyscale but proper LV colors.

Another question - what effects MLGreyscale preview performance? It started lagging recently (like less than 1fps), I don't think it was like that before.

2
Hey guys. Sorry for asking such a question but I really have no time to read all the thread, been away for too long...
What is the status on 12/10 bit raw? Is it working? Are there any downsides compared to 14bit?
I'm mainly interested in 50D as it's the camera that I have.
If there's a compiled module for my cam please give me the link. Thanks.

3
Raw Video Postprocessing / Re: The CinemaDNG Discussion (raw2cdng)
« on: February 08, 2016, 10:33:25 PM »
Hi. I've just recently started using raw2cdng.
Is it currently stable and safe to use? I've seen there were some issues with missing frames. Cuz it's just TL;DR for me for now.  :)

4
Anyone still working on this?
Had to post here to receive notifications (can't find the subscribe button).

5
Camera-specific discussion / Re: Canon 50D
« on: March 31, 2015, 11:30:56 PM »
Hey guys, any news on 60p for 50d?

6
Camera-specific discussion / Re: Canon 50D
« on: January 08, 2015, 02:18:43 PM »
Is there aliasing when shooting h264 as with RAW?

7
Camera-specific discussion / Re: Canon 50D
« on: November 10, 2014, 01:34:41 PM »
OK, didn't know that. But 5d2 is ok in this sense, right? Any other flaws of using crop? What do you think about my idea of using wide lens + crop?

8
Camera-specific discussion / Re: Canon 50D
« on: November 09, 2014, 10:08:11 AM »
What are the limitations of 5x crop mode? I'm considering getting 5D2 in the future for shooting in 5xC mode with a wide lens to get away from aliasing and moire... What should I be aware of and ready for?

9
Camera-specific discussion / Re: Canon 50D
« on: October 28, 2014, 01:29:10 PM »
TY Audionut, it was that. Now everything seems to be OK. BTW what is the recommended software to process mlv at this time? As I understand it "Magic lantern RAW video converter" is not being updated or developed anymore? Is there a good and reliable alternative with a similar functionality (batch, GUI)?
Thanks again for your help.

10
Camera-specific discussion / Re: Canon 50D
« on: October 22, 2014, 05:14:39 PM »
Hi. Anybody knows what causes green artifacts in overexposed areas? I use MLV, MLVConverter, ACR.

11
Camera-specific discussion / Re: Canon 50D
« on: August 04, 2014, 02:26:11 PM »
Hi. I've got a problem. When I record MLV with FPS override set to 23.976 exact (Nightly.2014Aug02) I get these intervals between frames (ms):
35   35   35   50   43   52   18   47   40   53   35   52   35   53   35   35   40   45   35   42   38   60   35   45

This is according to a video where I recorded a high-precision stopwatch from my LCD screen (60Hz). Can anyone suggest a more accurate procedure?
What could I be doing wrong? Any comments on this?

12
Camera-specific discussion / Re: Canon 50D
« on: April 26, 2014, 02:47:15 PM »
Yes, it will help others, like me, for sure. I have nothing to say on the subject yet but I'm watching and taking notice. This information is useful. So, keep up. Thank you.

13
Raw Video Postprocessing / Re: render settings in AE for dng files
« on: April 24, 2014, 08:38:54 AM »
Anyone using Lagarith RGB24 in AE?

14
General Help Q&A / Re: h264.ini - how it really works?
« on: April 01, 2014, 03:28:36 PM »
How do I get to play with this on 50D?

15
H264 GOP control, All-Intra.

16
Quote
My request: is it possible to implement a stable version of GOP and Slice Control back into ML?
Maybe not even all the complicated stuff, but at least a foolproof version of All-I recording (GOP=1) and maybe another inbetweener short GOP option?
Quote
I can only comment for the 7D since that's what I use. Yes, the difference is day and night. Especially when you shoot GOP1.
I'd very much like that too.
BTW, any chance it's possible on 50D?

17
Camera-specific discussion / Re: Canon 50D
« on: March 30, 2014, 03:23:12 PM »
ru31jan
Take a look here. Is that what you are talking about? If so there's a solution.
http://www.magiclantern.fm/forum/index.php?topic=7122.msg109438#msg109438

What about (true) pink frame corruption while recording with external HDMI monitor? Does anyone get any? Solution?

18
That was it. Thank you.

19
Omg. Sorry.
50D. Latest Nightly. All videos all frames. It's not like it's corrupted, just a tint. I've seen somewhere it has been reported before. Can't find now...
BTW, legacy RAW is OK...

20
Hi. I'm getting magenta tint on my .mlv's. Something I should know about?

21
What is the right way to run the bench - LV or not LV? Any specific mode or settings required for accurate results?

22
Modules Development / Re: 14bit RAW DNG silent pics! (silent.mo)
« on: October 04, 2013, 01:56:16 PM »
Hi. Is there version for 600D?

Pages: [1]