Keep calm and reverse the malware!
Server issues | Builds page | @autoexec_bin | IRC: #magiclantern
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Works rather convenient doesn't it, always had to activate SD_hack in debug menu, took some time and fiddling.
This new update from Danne is a big improvement.
Sounds pretty high. And this is with liveview on?
@Baladev
Danne made some nice modifications to the sd_uhs module.
Not sure which version you're using, but this new version of Danne activates at startup, it doesn't do write and read tests, only sets the necessary registers at startup.
You can check it works by looking at the Debug tab in ML menu, in memory patches, 3 patches linked to SD UHS are visible.
So if you know your SD card gets faster write speeds with the sd_uhs module, you can try this version, activate module in modules tab, and it's instantly loaded at each startup of the camera.
Link to modified sd_uhs module by Danne:
https://drive.google.com/file/d/1SJHrA75UXobTzBcsEY3lqbHxhNdoksPb/view?usp=sharing
For other users, be sure to test your card with the standard sd_uhs module before trying this one above, I have cards which become slower when using this module.
The Sandisk extreme pro (95MB/s, UHS speed class 3, video speed class V30) cards seems to be working very well with this sd_uhs module, my older sandisks extreme card becomes slower with this module
@jai554 - looks good. Have you tried running just the lens focus test by itself? Review Reply #116 for instructions. If that passes, run test_camera_exposure and test_movie so we can see if it passes those tests. Some cameras seem to have a hard time running all of the tests in one run yet they can pass each test when run individually.
@jai554 - Could you please post the "lens = table:" block from the log file using the Tamron lens you used to make this screenshot?
lens = table:
name = "17-50mm"
focal_length = 18
focus_distance = 570
hyperfocal = 2167
dof_near = 462
dof_far = 748
af = true
af_mode = 0
focus = function: p
autofocus = function: p
All lenses should be able to complete the focus test or at least not crash the test. It looks like lua couldn't put the camera into LiveView. Try running the test in photo mode with and without LiveView. Also do a regression test--are you getting the same results with 1.1.1 as you are with 1.1.2?
[EDIT] Maybe worth mentioning we're using lua_fix experimental builds when running these tests. The lua tests in the nightly builds use a different API (application program interface).
ML/SCRIPTS/API_TEST.LUA:1175: assertion failed!
stack traceback:
[C]: in function 'assert'
ML/SCRIPTS/API_TEST.LUA:1175: in function 'test_lens_focus'
ML/SCRIPTS/API_TEST.LUA:1349: in function 'api_tests'
ML/SCRIPTS/API_TEST.LUA:1364: in main chunk
[API_TEST.LUA] script finished.
Right, unless someone figures out how to do mjpeg which isn't totally out of the question.
We had similar issues running the test on the 650D. So you got to the end of the test?
===============================================================================
ML/SCRIPTS/api_test.lua - 2018-4-19 13:20:38
===============================================================================
Strict mode tests...
Strict mode tests passed.
Generic tests...
arg = table:
[0] = "api_test.lua"
camera = table:
shutter = table:
raw = 99
apex = 5.375
ms = 24
value = 0.024097
aperture = table:
raw = 22
apex = 1.75
value = 1.8
min = table:
raw = 22
apex = 1.75
value = 1.8
max = table:
raw = 80
apex = 9.
value = 22.6
iso = table:
raw = 80
apex = 6.
value = 200
ec = table:
raw = 0
value = 0
flash = true
flash_ec = table:
raw = 0
value = 0
kelvin = 5200
mode = 3
metering_mode = 1
drive_mode = 0
model = "Canon EOS 60D"
model_short = "60D"
firmware = "1.1.2"
temperature = 163
gui = table:
menu = false
play = false
play_photo = false
play_movie = false
qr = false
idle = true
bulb = function: p
wait = function: p
burst = function: p
reboot = function: p
shoot = function: p
event = table:
pre_shoot = nil
post_shoot = nil
shoot_task = nil
seconds_clock = nil
keypress = nil
custom_picture_taking = nil
intervalometer = nil
config_save = nil
console = table:
write = function: p
clear = function: p
hide = function: p
show = function: p
lv = table:
enabled = false
paused = false
running = false
zoom = 1
overlays = false
stop = function: p
pause = function: p
resume = function: p
wait = function: p
info = function: p
start = function: p
lens = table:
name = "EF50mm f/1.8 II"
focal_length = 50
focus_distance = 0
hyperfocal = 73199
dof_near = -109905601
dof_far = 1000000
af = true
af_mode = 0
autofocus = function: p
focus = function: p
display = table:
idle = nil
height = 480
width = 720
notify_box = function: p
print = function: p
load = function: p
draw = function: p
off = function: p
rect = function: p
on = function: p
clear = function: p
pixel = function: p
circle = function: p
screenshot = function: p
line = function: p
key = table:
last = 10
wait = function: p
press = function: p
menu = table:
visible = false
open = function: p
get = function: p
close = function: p
select = function: p
block = function: p
set = function: p
new = function: p
movie = table:
recording = false
stop = function: p
start = function: p
dryos = table:
clock = 42
ms_clock = 42554
image_prefix = "IMG_"
dcim_dir = table:
exists = true
create = function: p
children = function: p
files = function: p
parent = table:
exists = true
create = function: p
children = function: p
files = function: p
parent = table:
exists = true
create = function: p
children = function: p
files = function: p
parent = nil
path = "B:/"
path = "B:/DCIM/"
path = "B:/DCIM/100CANON/"
config_dir = table:
exists = true
create = function: p
children = function: p
files = function: p
parent = table:
exists = true
create = function: p
children = function: p
files = function: p
parent = table:
exists = true
create = function: p
children = function: p
files = function: p
parent = nil
path = "B:/"
path = "ML/"
path = "ML/SETTINGS/"
ml_card = table:
cluster_size = 32768
drive_letter = "B"
file_number = 2208
folder_number = 100
free_space = 31119808
type = "SD"
path = "B:/"
_card_ptr = userdata
shooting_card = table:
cluster_size = 32768
drive_letter = "B"
file_number = 2208
folder_number = 100
free_space = 31119808
type = "SD"
path = "B:/"
_card_ptr = userdata
date = table:
sec = 39
min = 20
hour = 13
wday = 6
isdst = false
day = 19
yday = 1
year = 2018
month = 4
call = function: p
rename = function: p
directory = function: p
remove = function: p
interval = table:
time = 10
count = 0
running = false
stop = function: p
battery = table:
level = 35
id = 1
performance = 2
time = nil
drain_rate = 33
task = table:
create = function: p
yield = function: p
property = table:
Generic tests completed.
Module tests...
Testing file I/O...
Copy test: autoexec.bin -> tmp.bin
Copy test OK
Append test: tmp.txt
Append test OK
Rename test: apple.txt -> banana.txt
Rename test OK
Rename test: apple.txt -> ML/banana.txt
Rename test OK
File I/O tests completed.
Testing Canon GUI functions...
Enter MENU mode...
Enter PLAY mode...
Enter MENU mode...
Exit MENU mode...
Enter PLAY mode...
Enter PLAY mode...
Enter MENU mode...
Enter MENU mode...
Exit MENU mode...
Start LiveView...
Enter PLAY mode...
Enter PLAY mode...
Exit PLAY mode...
Pause LiveView...
Enter MENU mode...
Enter MENU mode...
Exit MENU mode...
Pause LiveView...
Resume LiveView...
Pause LiveView...
Enter PLAY mode...
Exit PLAY mode...
Enter PLAY mode...
Exit PLAY mode...
Stop LiveView...
Enter MENU mode...
Exit MENU mode...
Enter MENU mode...
Enter PLAY mode...
Exit PLAY mode...
Start LiveView...
Enter PLAY mode...
Exit PLAY mode...
Pause LiveView...
Enter PLAY mode...
Enter MENU mode...
Enter MENU mode...
Exit MENU mode...
Enter MENU mode...
Exit MENU mode...
Pause LiveView...
Resume LiveView...
Enter MENU mode...
Enter PLAY mode...
Exit PLAY mode...
Enter PLAY mode...
Enter MENU mode...
Exit MENU mode...
Pause LiveView...
Resume LiveView...
Pause LiveView...
Enter PLAY mode...
Enter MENU mode...
Enter MENU mode...
Enter PLAY mode...
Enter PLAY mode...
Enter PLAY mode...
Exit PLAY mode...
Enter MENU mode...
Enter PLAY mode...
Enter PLAY mode...
Exit PLAY mode...
Stop LiveView...
Start LiveView...
Enter PLAY mode...
Enter PLAY mode...
Enter MENU mode...
Exit MENU mode...
Enter MENU mode...
Enter MENU mode...
Enter MENU mode...
Enter PLAY mode...
Enter PLAY mode...
Exit PLAY mode...
Stop LiveView...
Start LiveView...
Enter MENU mode...
Enter PLAY mode...
Enter MENU mode...
Canon GUI tests completed.
Testing ML menu API...
Menu tests completed.
Testing picture taking functions...
Snap simulation test...
Single picture...
B:/DCIM/100CANON/IMG_2209.CR2 not found.
B:/DCIM/100CANON/IMG_2209.JPG: 5662879
Two burst pictures...
Ideally, the camera should be in some continuous shooting mode (not checked).
B:/DCIM/100CANON/ABC_2210.CR2 not found.
B:/DCIM/100CANON/ABC_2210.JPG: 5729078
B:/DCIM/100CANON/ABC_2211.CR2 not found.
B:/DCIM/100CANON/ABC_2211.JPG: 5664187
Bracketed pictures...
B:/DCIM/100CANON/IMG_2212.CR2 not found.
B:/DCIM/100CANON/IMG_2212.JPG: 5934052
B:/DCIM/100CANON/IMG_2213.CR2 not found.
B:/DCIM/100CANON/IMG_2213.JPG: 5712465
B:/DCIM/100CANON/IMG_2214.CR2 not found.
B:/DCIM/100CANON/IMG_2214.JPG: 754961
Bulb picture...
Elapsed time: 13157
B:/DCIM/100CANON/IMG_2215.CR2 not found.
B:/DCIM/100CANON/IMG_2215.JPG: 363953
Picture taking tests completed.
Testing multitasking...
Only one task allowed to interrupt...
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Multitasking tests completed.
Testing half-shutter...
Half-shutter test OK.
Testing module 'lv'...
LiveView is running; stopping...
Starting LiveView...
Overlays: Canon
Overlays: Canon
Overlays: ML
Overlays: ML
Overlays: disabled
Overlays: Canon
Overlays: Canon
Overlays: Canon
Overlays: disabled
Overlays: ML
Overlays: disabled
Overlays: Canon
Overlays: Canon
Overlays: Canon
Overlays: Canon
Setting zoom to x1...
Setting zoom to x5...
Setting zoom to x10...
Setting zoom to x5...
Setting zoom to x1...
Setting zoom to x10...
Setting zoom to x1...
Pausing LiveView...
Resuming LiveView...
Stopping LiveView...
LiveView tests completed.
Testing lens focus functionality...
Autofocus outside LiveView...
Focus distance: 0
Autofocus in LiveView...
Never say never and always avoid always because all generalizations are false.
Seriously, there has been some progress made on other cameras including the 700D and 5D2 that might get them closer to 4K. It seems to indicate that all these Canon DSLR's could possibly do 4k.
For the 80D it is a little too early to say because ML isn't far enough along on that camera yet.
So, realistically what are the chances of getting 4k?
a1ex made a ML-SETUP.FIR for 1.1.2 so with the latest test build you should be able to install ML -- which basically sets the bootflag on both the camera and card.
Got it:
Here's a behind the scenes look:
Test build on my downloads page. This is an early test build without a .FIR file so if you want to try it out make sure ML is running on your 60D.111 before doing the Canon firmware update to 1.1.2.
@jai554 - Great!
Steps:In case that doesn't work, try the blind dumper: https://a1ex.magiclantern.fm/bleeding-edge/blind-dumper/autoexec.bin
- Make sure you have ML working on your 60D, prepare a few cards with ML. Sometimes the card gets corrupted and usually smaller capacity cards cards work better than the large ones. The important part is that your camera and card bootflags are set. The ML installation does that.
- Download the 60D Canon Firmware for Testers.zip from my downloads page: https://bitbucket.org/daniel_fort/magic-lantern/downloads/ in there you'll find the Canon firmware updaters to get you to 112 and back to 111.
- Put both firmware updaters on either an SD card formatted without the bootflag set -or- on a ML prepared card with the bootflag set but remove the ML-SETUP.FIR file from the card.
- Download the Portable firmware dumper from here: http://a1ex.magiclantern.fm/debug/portable-rom-dumper/autoexec.bin
- Put the Portable firmware dumper (just an autoexec.bin file) on a card that has the bootflag set. It should dump the 1.1.2 firmware when you run it in camera. It might not work the first time or you might need to run it on a few different cards. You can read more about it here: http://www.magiclantern.fm/forum/index.php?topic=16534.0
- Zip up the files and PM me. Don't share openly on the forum!
If you're interested in how to port ML to a Canon firmware update you check out my tutorial.
- You'll need to have a valid image on your card so when you press the playback button it has something to playback.
- Again, on a card with the bootflag set and a valid in the proper directory, put the blind dumper autoexec.bin file on the card and start the camera.
- Press the Playback button.
- You should get a new file in the root directory of your card, on the 500D it was named "As" and that should be the firmware dump.
Looks like there's some confusion over firmware on the 60D. Current working Magic Lantern version is for 1.1.1 and latest Canon firmware is at 1.1.2. If anyone has a 60D.112 firmware dump please PM me. Thanks!
Does this apply to DIGIC 4 cameras?
I'm afraid not - the hardware configuration of these cameras is different (and a lot simpler). You now know where to look, so you can play with it, attempt to change the clock speed and report your findings.
