Messages

I just retested in 5x crop. I can do, as you say 2048 x 872 at 2:35:1 in 5x with global draw ON. The card reads 73.6 mb/s on continuous. The benchmark pic for the card you will see on this page (84) under jman.
The card is a sandisk extreme pro 160 mb/s 1067x. Cheers.

wow. Even with crop 10x, GD off and speed >80Mb/s cant get such results(

Compare raw2cdng v.1.3.0 and raw2dng with 7D footage. Here is a result: https://drive.google.com/folderview?id=0B2NWwDUimG9cbS1mWFRtaXgzSFU&usp=sharing
Left part is a raw2dng, right is a raw2Cdng. Import to Photoshop via ACR as is - nothing was changed. On a raw2cdng dng file clearly one can see color moire on a roofs (blue + yellow). What am I doing wrong?

Compare raw2cdng v.1.3.0 and raw2dng with 7D footage. Here is a result: https://drive.google.com/folderview?id=0B2NWwDUimG9cbS1mWFRtaXgzSFU&usp=sharing
Left part is a raw2dng, right is a raw2Cdng. Import to Photoshop via ACR as is - nothing was changed. On a raw2cdng dng file clearly one can see color moire on a roofs (blue + yellow). What am I doing wrong?

If you figure out how to make a spot brush pattern in ACR and save it to use all over other footages - pls, share)
I have a concept, but dont know how to realise it - make a matte layer with all hot pixels, than use it in AE with WarpStabilizer + Synthesize edges to remake - http://blogs.adobe.com/aftereffects/2011/06/warp-stabilizre-redux.html. Maybe someone can help and say how to make such universal matte mask?

With TragicLantern several latest builds, sometimes camera hangs out, when I push Play button to exit crop mode. Only battery reconnection helps...

Hi. Can someone explain for me about CHDK and its relationship with ML. Im using Pelican software and it says that CHDK enabled (with ML), but I cant figure it out where is it and how can I use its functions. Actually, Im interesting in a hot peixel removal function. Thanks.

raw2dng automatically converts several files of one continious "footage". But, I prefer raw2cdng...

No moire only when shoot in a crop mode. Import to AE through ACR with a little post processing.

Testdisk and other recovery programs should get the files back. Then you can add a header from a good file and replace the frame count or resolution.

Ive looked some RAW files and cant find coomon pattern in the header (if it exist). Only at the end of file I found some common, but cant figure it out whats in there...

Hi. I want to ask 1% - maybe you can help me and direct me where I can find some info about RAW file format. Recently, I accidently delete some RAW files and need pattern to recover them. Thanks.

A little test:

Hi. Im accidently delete RAW video (7d) files from CF card and now need to recover them. Maybe someone have a solution for this? If not, can someone tell me a header (and maybe an end) pattern for RAW video files?
Or maybe some links to documents, that describes .RAW file format?
Thanks.

I would appreciate, if someoe explain me about ML and TL and their difference. Thanks.

Hi. When I try to open a folder, where imported by raw2cdng files are located, in Resolve it hangs up and closed with error. What can be wrong? Im using 16bit linear and 15% white unchecked when importing. AE opens without problem.
Some example of DNGs:
https://drive.google.com/folderview?id=0B2NWwDUimG9cOGEyOGEwMjUtZDYyNC00ZmUyLWIyZDgtMzhmNjE4ZWU5NTMy&usp=sharing

Resolve 10.b3 works fine.

With digic peaking from boot had this symptom as well... I think I'm going to delete the config variable for it so you have to enable it every boot like dialog timer.

I'm  happy enough recording 1728x1152 which is cont for me.

For the 1080P its hit or miss continuous it seems (ive seen it before), 10x also helps a little but in raw quality I'm only getting ~1:30 too, maybe switch to jpeg... its doing 82MB/s so probably 1038 would work.

Ok, cleared card.

1. Photo mode, timers disabled, quality jpeg
2. record at 1x till see some 79MB w/ idle
3. 10x or 5x... 1920x1038 is continuous
4. record 7 minutes (32GB) while I type, still going


so if you're really hard up about the 40px, buy a 50D where its 1080P or 2kx1k... but 50D can't do the wonderful full size LV we have without the crop factor, its only 15xx.

600D folks are scaling 960x540 to 720P and 1080P, lol.

what version of firmware. With a last update Ive got a really bad speeds - ~73MB\s (

Hi. When I try to open a folder, where imported by raw2cdng files are located, in Resolve it hangs up and closed with error. What can be wrong? Im using 16bit linear and 15% white unchecked when importing. AE opens without problem.
Some example of DNGs:
https://drive.google.com/folderview?id=0B2NWwDUimG9cOGEyOGEwMjUtZDYyNC00ZmUyLWIyZDgtMzhmNjE4ZWU5NTMy&usp=sharing

Hi. Maybe someone have Rokinon/Samyang 8mm lens and can test it in a 5x crop mode? Im eager to see the results...
Thanks

Pls, clarify for me this basic - when we using RAW video, we dont apply any encoding in a color space and only when we postprocess footage, we choose in what color space it will be. Am I right? Thanks.

sorry, my mistake - it converts to dng all footage, process M00 and so on automatically.

I use win version

Strange, but using mlv2dng from this topic http://www.magiclantern.fm/forum/index.php?topic=7802.0 gives me an error...

The latest mlv2dng does merge them... I do it all the time!!!

UPDATE: actually I don't think it'd merge them in the end (maybe in the background) but it can process those split files and generates DNGs

win or mac?

nvm

Hi. Can someone advise how to merge .mlv files into 1 footage? Mlv2dng cant procedd them(. Thanks.

raw2dng.exe  is missing...
everyone talkin about raw2cdng program. Is it same as raw2dng?
Thanks.

Its seems, that it is lucky me)