Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - electrichobo

#1
Tragic Lantern / Re: Tragic Lantern for 6D
January 14, 2014, 10:30:29 PM
Quote from: cpreston on January 14, 2014, 07:02:59 PM
I can't seem to unzip the four most recent downloads from: https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/downloads  The earlier downloads from October and earlier work fine for me.  I'm working on a Mac.  Is this my problem or a problem with the downloads?
download Unarchiver and it'll do it for ya.  I had the same issue. The files are fine but for some reason mac doesnt like me this time.
#2
What is our highest resolution capable continuous right now? (in raw)
#3
Tragic Lantern / Re: Tragic Lantern for 6D
November 03, 2013, 03:07:45 AM
Quote from: 1% on November 02, 2013, 11:04:32 PM
Fat32 card? That makes .r0X files, they are your clip continued.

The guide does go away with global draw now. Was kinda opposed to the black crop marks, go figure.
so can i enable it with GD on?
exfat cards.
#4
Tragic Lantern / Re: Tragic Lantern for 6D
November 02, 2013, 10:29:09 PM
Quote from: painya on November 02, 2013, 10:13:57 PM
Do you have frame skipping enabled?
I do not.
#5
Tragic Lantern / Re: Tragic Lantern for 6D
November 02, 2013, 10:05:10 PM
Frame guide keeps going away in raw. Any thoughts?
Also ending up up with x.r00 files.
#6
Tragic Lantern / Re: Tragic Lantern for 6D
September 02, 2013, 07:25:58 PM
any updates on having the wav/audio record with the video clip in one file (non separate)
#7
Tragic Lantern / Re: Tragic Lantern for 6D
August 09, 2013, 11:30:01 AM
So it's late and I'm trying to dig through the 104 pages of posts to varying degrees of success.
I'm hunting the best settings for continuous raw recording.  2.35 is fine with me w/ the upscale needed.
what modules in, what settings?  ideally live view enabled.
#8
Tragic Lantern / Re: Tragic Lantern for 6D
August 08, 2013, 05:50:31 AM
Quote from: 1% on August 07, 2013, 11:06:30 PM
You can't do flush rate or gop + embedded audio, nor fps override. Otherwise its should work from canon menus as normal (even at like 120Mb/s +). To get those 3 I have to figure out how to patch the audio so the sync functions don't crash the camera.

The begining of the wavs should be in sync with the start of the video clip. After a while they seem to drift someone said that it was in sync with 25P and 600D TL1 working with all audio functions in 25p seems to support that. Alternately I think you can change the wav length to like 103%... if you beep 2 separate times throughout the clip you can probably get figure out the stretch/skew, it should be the same every time.

I also can't just turn on embedded audio for like 3 seconds and turn it off, same crash issue. I can mute it but it will keep writing a blank stream/or crashing.

P.S. this isn't a 6D exclusive issue.. every camera looks affected by it.

copy, so it wasnt my ineptitude it's a software hurdle.  cool. let me know how I can help.
#9
Tragic Lantern / Re: Tragic Lantern for 6D
August 07, 2013, 08:18:19 PM
right, but recording seperate is another step for our editor/assist editor - all Im looking for is the audio married to the video track, not separate so that its a quicker sync to the externaly recorded audio.  the internal mic is fine as its mostly there to just hear the slate.
#10
Tragic Lantern / Re: Tragic Lantern for 6D
August 05, 2013, 07:19:40 PM
so the shoot is over from last weekend, we weren't shooting raw, a few issues, but ill credit that mostly to the shitty cards the producers bought.

* Could not get guide track audio to record on the clip.  in Normal or Separate WAV settings - clearly I was doing something wrong, but Id like to know what.  the guide track was to help the editor sync in addition to the slate.  he said that occasionally there would be the wav files on the card (separate wav setting) yet they all read 6mins :15 seconds and were blank/empty

* the framerate override didn't work, or appear to do anything (which is fine, we just did a base canon OS 60fps) but I'm probably using this wrong as well - is there a hidden step im missing other then enabling & setting the rate and whatnot within the submenu?

[6D] ADTG Shutter build.
#11
Tragic Lantern / Re: Tragic Lantern for 6D
July 31, 2013, 09:20:30 AM
doing a paid shoot with the 6d w/ ML non-raw this weekend. ((will safety shoot with the 5dmarkiii no ML))
I'll report back.
#12
Tragic Lantern / Re: Tragic Lantern for 6D
June 22, 2013, 04:50:44 AM
I get busy on set for 4 days and i come back to this?!  Okay, I'll test what I can tomorrow, here in the states, using Teo's set ups.

I'll report back. Unless you all have more options.
(side note, and maybe I'm an idiot, but why would I stay in photomode? and how would that work, just set frame burst to continuous?)
#13
Tragic Lantern / Re: Tragic Lantern for 6D
June 09, 2013, 08:16:00 PM
Where are we at as far as ratio vs continuous shooting?  I'd like to work on filling in the "matrix" chart that's been floating around but would like to start at where we see our tops right now.
#14
Where are we at as far as ratio vs continuous shooting?  I'd like to work on filling in the "matrix" chart that's been floating around but would like to start at where we see our tops right now.
#15
Tragic Lantern / Re: Tragic Lantern for 6D
May 31, 2013, 06:24:00 AM
not sure if anyone has reported;

mememe - when using the focus ring on a lens that reports to the camera - 24-105 IS L series II - the focus assist pops up automatically, at 5% is corrupt image, functions fine at 10%, but any time the focus ring is touched this happens.

also the ML settings screen vanishes by itself on occasion.

side question - what frame size/aspect has given us the longest record time / greatest amount of frames?
#16
Tragic Lantern / Re: Tragic Lantern for 6D
May 29, 2013, 09:01:36 PM
<--- kind of an idiot, so forgive my stupid question but...

Do I simply replace the bin & the rec_mo on the SD card with the updated ones from 1%'s bucket?  There's a lot of files on there and I don't want to eff it up on my end so that I can keep testing.
#17
Tragic Lantern / Re: Tragic Lantern for 6D
May 20, 2013, 06:43:29 AM
Quote from: noisyboy on May 20, 2013, 04:28:25 AM
Any newbie lurkers that like dicing with death want a quick go of this installation guide before I post it publicly then PM me. I have tested it and the files like 5 times and only broke 2 cameras so it's cool.



Of course I'm kidding - I have tried it 5 times and it worked fine but please remind yourself that you do this at your own risk before you commit to it 8)

Ps. Windows only at the moment.

ill take a peek. and mayhaps adapt for an OSX
#18
Tragic Lantern / Re: Tragic Lantern for 6D
May 18, 2013, 02:34:13 AM
i'd love you long time!

Quote from: noisyboy on May 17, 2013, 09:22:30 PM
Update to 113 and format card (just to save any bother). Then run eoscard and replace autoexec . There are files you have to put on which adds the raw shooting capability in the form of a "module". Basically you'll be good to go if you get everything from the [113] Auto Allocate.zip  and then just update files as they become available: https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/downloads

1% is it bad form if I basically share everything people will need to get going using the "4 buffers no worries" version? I started writing instructions for "leenks" who was asking for help getting started further up the thread but it ended up being a full on guide with loads of different links so I figured I might as well just throw everything needed into a zip for people to get going and upload it to my ge.tt instead of people having to drudge through a load of stuff they probably don't quite understand. It literally took me about two days to work out getting started with ML so I know what it's like when you have never done this before.

Thought I better ask before I share anything myself as I know it's all openly available to whoever wants to use it but I don't know what the etiquette is on sharing myself.
#19
Tragic Lantern / Re: Tragic Lantern for 6D
May 14, 2013, 05:46:14 PM
Quote from: a1ex on May 14, 2013, 05:08:17 PM
What about DDhhmmss.RAW (day, hour, minute, second) ?

We are limited to 8 characters.

or preferable timecode.
#20
Tragic Lantern / Re: Tragic Lantern for 6D
May 14, 2013, 12:39:52 AM
Quote from: teo770 on April 22, 2013, 01:47:19 PM
I think it's time to update the 1st post with a "101 ML on Canon6D" article....
I just want to remind you the "how big update !!!" the firmware 1.1.3 brings you: a bug fix to a date/time issue (i never had personaly). Great ! Canon, who cares about focus peacking ???

Steps for ML on Canon 6D with firmware 1.1.2 are:

- Make the SD card bootable using EOScard:
http://wiki.magiclantern.fm/3rd_party_software

- Get ML 2.3 from ML website:
http://bitbucket.org/magiclantern/magic-lantern/downloads/magiclantern-v2.3.550D.60D.600D.50D.500D.5D2.zip

- Get 6d-112.fir from:
http://bit.ly/ZgvGUf

- Get the last autoexec.bin.something renaming it to autoexec.bin
from: https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/downloads
+ 4 .ini files at the end of listing: h264.ini, cbr.ini, vbr.ini, rc.ini

- Place the new autoexec.bin and 6d-112.fir in the homedir of the SD card
- Place the .ini files in ML dir of the SD card

- Put SD card in camera and update firmware while in M mode. Restart.

That's it.

does this still link to the current build?  I want to join the testing on the current stuff.
#21
Tragic Lantern / Re: Tragic Lantern for 6D
April 11, 2013, 04:37:55 AM
so just compile from the nightly build and load it as normal? (sorry, new to the Dev versions)
6D
#22
Tragic Lantern / Re: Tragic Lantern for 6D
March 25, 2013, 10:21:58 PM
what can/do I have to do to help w/ the 6d port? Got my cam here and im ready to do what I can!