Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - gravitatemediagroup

Pages: [1] 2 3
1
Modules Development / Re: Danne's crop_rec_4k & ISO experiments
« on: Yesterday at 03:14:00 AM »
has anyone else experienced blacked out playback as if something went wrong with recording, but when loaded into MLVApp the image is there?  I've been noticing this the past few builds, I've tested and changed various settings/resolutions to see if I had accidently turned something off, but every shot comes back blank.  The liveview before shooting is there, just no playback.

sorry if this has been discussed already, i'm short on time so I just jumped to the end of the thread to ask. :) 

2
Modules Development / Re: Danne's crop_rec_4k & ISO experiments
« on: October 26, 2019, 04:46:47 AM »
nothing warms my heart more than seeing progression here

3
Camera-specific discussion / Re: Canon EOS M
« on: October 24, 2019, 05:04:25 AM »
Is it possible to record audio on any of the raw settings? I know the more demanding presets like Ana etc. you can't, but is it possible mv1080 or 2.5k? I ask because I rarely see sound brought up in recent builds and the videos people post are silent.

I personally find the audio SUPERB, even just the on board mic. here is an older build test that has a lot of good raw audio, what blew me away was all the nature sounds I was capturing while not even thinking twice about it while out shooting. If I ever needed some nature sound fx, I would be comfortable with the M getting the job done. lol
  

4
Camera-specific discussion / Re: Canon EOS M
« on: September 06, 2019, 12:50:04 AM »
A few suggestions for EOS M (and ML in general)

There is undoubtedly a big difference in experience between ML users (in terms of technical knowledge and/or years of usage), which is why I would suggest the following (for both ease of use, and to try and avoid getting the same questions again and again):

Startup modes
If technically possible (and I would assume so), I would suggest creating 'startup modes'. Three perhaps:
  • Simple
  • Intermediate
  • Advanced
These would basically be pre-set customised menus (with default set at simple).
Simple = would show as little as possible: main feature being the presets scripts, some photo options (bracketing for example) etc.
(Makes ML easier to use, and avoids changes that cause issues..)
Intermediate = would obviously show more features. To be discussed...
Advanced = would show everything.
(+ The build zip files should perhaps include a small 'install & how to' txt/pdf file to ensure the canon menu is set the right way).

maybe in an alternative build, but I wouldn't want this extra stuff in a main build

5
Camera-specific discussion / Re: Canon EOS M
« on: August 09, 2019, 08:36:03 PM »
wow, that's a nice fix :)  Shame BMD never could in earlier cameras. lol although to be fair, there are other cinema cameras plagued with it.

6
Camera-specific discussion / Re: Canon EOS M
« on: July 21, 2019, 07:34:04 PM »
.

this isn't FB with notifications, so you'll have to check back from time to time ;) Just thought i'd let you know rather than you wait for info updates that never come.

7
Camera-specific discussion / Re: Canon EOS M
« on: July 19, 2019, 10:20:57 PM »
2.5k 2520x1418

How are you achieving continuous recording in that resolution? I've never got more than a couple seconds before it stops.  The sample you posted is 1920x1080

8
Camera-specific discussion / Re: Canon EOS M
« on: July 14, 2019, 08:16:21 PM »
Could you make the group open?

Yes, but I'd prefer not to for a few different reasons.  Main reason is to keep spam/advertising bots from being a nuisance, along with real people trying to promote junk or scams.  Another reason is occasionally when a post is made within an open group, it will show up on non members timelines saying "_____ posted in the group MLV on EOS M".  I'm sure that's facebook's automatic way of trying to help the groups population grow, but then the next thing you know peoples grandmothers will be posting in the group asking how to fix her TV, or somebody's friend popping in just to be a troll to some degree.  I could come up with a couple other reasons, but those are the main ones.  One other reason would be if somebody is wanting feedback on a project they're working on, they may want to try and keep it private from public viewing until it's complete. 

9
Camera-specific discussion / Re: Canon EOS M
« on: July 14, 2019, 06:42:07 PM »
And there is a reddit and Petapixel and there are DPReview forums and Miranda forums andandand. Sounds legit to open a few more, they are all clogged.

I use none of those forums.  PetaPixel is more or less click bait now days, I've never even heard of Miranda.  Can you upload videos to any of the above sites or would it require linking to YouTube or Vimeo? I'll also go out on a limb and say the response to a question on facebook is quicker than all of the above.  Like I said earlier, if facebook isn't your thing, disregard the post, unnecessary sarcasm has never solved a problem.  Forgive me for trying to leave this topic open to more advanced users and developers,  I personally don't like to scroll through 20 questions of somebody trying to load ML on an SD card when all I'm really looking for is the latest build's discussion and the changes pertaining to that build.  If I myself have a basic question, I would hate to ask it on here just to get some kind of sarcastic response...it solves nothing.

10
Camera-specific discussion / Re: Canon EOS M
« on: July 14, 2019, 01:11:57 AM »
For those that are new to ML or old timers, just a reminder there is a dedicated facebook group for MLV on EOS M with plenty of knowledgeable users that can help answer a majority of basic troubleshooting questions.  I'm only posting this reminder to let people know there are other ways to find an answer that doesn't involve clogging up the development discussion.  Of course, if it's a possible bug needing to be reported, the ML forum would be the right place.  If facebook isn't your thing, disregard this post. lol

https://www.facebook.com/groups/375018026655820/?ref=bookmarks   

11
Duplicate Questions / C100
« on: April 13, 2019, 05:23:16 AM »
Welcome to the fascinating world of reverse engineering!

I know canon has forbid ML developers from touching the C line (or so I've been told) but are there any rumors of rumors of anything EVER being developed for say, a c100.  The more the price drops on the c100 and the more polished ML becomes...the camera God's should allow it into existence.  8)  ML on the M is a better image than 85% of the video cameras/dslr's they have in production or ever produced, so I'm not sure why they would care at this point.  I'd literally buy a c100 tomorrow if there was a ML build for it. lol     

12
Camera-specific discussion / Re: Canon EOS M
« on: April 10, 2019, 04:41:57 PM »
I know the Overlook Hotel when I see it. lmao that's what those screen grabs look like. The Shining.

13
Camera-specific discussion / Re: Canon EOS M
« on: April 04, 2019, 06:00:11 AM »
Can you send me samples of what you shoot ?

This card can record 4k in EOS m50, though I know it is 8 bit. I do not understand why it would not record 40 mb/s data in ML eos m.

HUGE difference in 8bit 4k and RAW.  A completely different beast, it's pretty much the purpose of ML. 

14
Camera-specific discussion / Re: Canon EOS M
« on: April 04, 2019, 04:00:11 AM »
https://www.amazon.com/SanDisk-Extreme-microSDHC-UHS-3-SDSQXAF-032G-GN6MA/dp/B06XWMQ81P/ref=sr_1_3?keywords=SanDisk+Extreme+32GB+microSDXC&qid=1554244329&s=electronics&sr=1-3

This is the card I am using.

I just can not record 4k resolution without lower half pink frame after 1 min, and it starts to skip frames after 40 seconds or so. I am using 5k anamorphic mode and I tweak the settings to 16:9 in croprec and 2.35:1 in 5k anamorphic settings, then max the resolution which equals to 3500x1500 when strectched. I was able to record 4464x1900 resolution (when strecthed) but now I can not achieve it again and I do not remember which mode I have used to record it.

Which mode is best for recording 4k ?

I'm not sure if using a microSD, especially one of that speed, will be able handle what you're trying to throw at it, especially depending on what other settings you have set within ML.  I think most people use the ExtremePro 95MBs cards, wheras I think your card is 30MBs.

15
Camera-specific discussion / Re: Canon EOS M
« on: April 04, 2019, 02:16:42 AM »
Do you know which cards required to record 4k ? I am complaining about the this latest build, I am new to ML and I thought I could record clean 4k footage with my original M after all this years.

crop_rec_4k_mlv_snd_isogain_1x3_presets_2019Mar29.EOSM202

which card are you using? everything it says on the front, or just take a pic of it.

16
Camera-specific discussion / Re: Canon EOS M
« on: April 04, 2019, 01:58:35 AM »
which build is being complained about?  I've not shot a ton with the latest, but I've not seen any anything unusual yet.  I also try and stick with the settings I know are stable with my card.  I have a feeling, most of the people complaining are more than likely trying to run settings their card can't handle. 

17
Camera-specific discussion / Re: Canon EOS M
« on: March 31, 2019, 08:31:56 PM »
I don't want this to come across as advertising, because this ain't that. lol
but if anybody has any "noob or newbie" questions, the facebook group I started may be a better place to ask "getting started" type questions instead of the development thread.  There are also several videos people have shared of what they've shot with the M and I'm sure there are more on the way.  Any and all are welcome :) if not allowed, delete. 

https://www.facebook.com/groups/375018026655820/?ref=group_header

18
Camera-specific discussion / Re: Canon EOS M
« on: March 18, 2019, 08:44:19 PM »
The greenish tint in liveview while recording is gone! now it looks like a vintage 70's LUT, which is fine by me.  :P

19
Camera-specific discussion / Re: Canon EOS M
« on: March 15, 2019, 10:03:32 PM »
@masc  was probably a couple different light sources, natural from a window, tungsten overhead, but no fluorescent.  I've tested all other builds from the past couple months in the same environment, with same shutter, but this is the first I've noticed this in the past couple builds.   

20
Camera-specific discussion / Re: Canon EOS M
« on: March 15, 2019, 01:08:20 AM »




Turning this off has stopped it.

21
Camera-specific discussion / Re: Canon EOS M
« on: March 15, 2019, 12:44:08 AM »


nothing changed from what the preset script loads. seems to only be doing it in 5x crop.  It doesn't do it at 1/100 shutter and above, only below. It's not just in cameras live view, it's baked in to the MLV file

about to load the March 14th build and see if it's still present

22
Camera-specific discussion / Re: Canon EOS M
« on: March 14, 2019, 10:59:01 PM »
1/50 ISO 800

23
Camera-specific discussion / Re: Canon EOS M
« on: March 14, 2019, 04:43:32 PM »
anybody else notice a flicker in latest build?  almost like a line sync effect

24
Camera-specific discussion / Re: Canon EOS M
« on: March 07, 2019, 10:17:13 AM »
I need the build from March 6th to test and hopefully able to duplicate, but don't see it on the bitbucket page, do you happen to still have that build handy?

25
Camera-specific discussion / Re: Canon EOS M
« on: March 07, 2019, 10:00:37 AM »
Please upload a MLV file which recorded uncropped in this resolution. The resolution you mention is only working with Movie crop mode(x3crop) without rewired preset applied. This resolution can probably be starting point also with rewired preset on when starting cam but push canon menu to get into correct mode.
If you managed to record in non cropped mode you need to inspect the actual file recorded. Proof.





This has happened about 3 times now, I purposely tried to test it with most recent build but it didn’t happen, so i may install the previous build to see if it happens with it.

Also, I’ve lost sound in the past few builds, whereas before it was flawless.  Sound setting is enabled.

Pages: [1] 2 3