Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jose_ugs

Pages: [1] 2 3 ... 10
1
Share Your Videos / Re: 5Dmk3 ML RAW + Camera Movement test
« on: October 04, 2015, 12:34:01 AM »
Read the description:
Cambo V-40 Camera Crane

2
Wasn't there already a tool for that, RAW2MLV?

3
Share Your Videos / Re: Shades of Joburg - 5D Mark iii + ML Raw
« on: March 16, 2015, 02:28:04 AM »
Nice one! Was it all handheld?

4
Raw Video / Re: 5D3: 1.1.3 vs 1.2.3 Slow Mo Record Times
« on: March 15, 2015, 10:21:45 PM »
Apparently, your camera has to bee freed from other activities in order to take full advantage of spanning - GD should be fully OFF, hacked and it should be 1.1.3 with no hdmi output used.

Why's that? Most of us use spanning in order to use GD and peaking or zebras (for example) and have it all working smoothly...

5
YEsssss!!!
p.s. That was just a spontaneous reaction to a1ex's post (and not hjfilmspeed's)!

6
Going FPGA way may be time consuming so the cost may go high. The time is the key factor in this era, cams that uses CF become less, CFast will dominate, so the need for this adapter may disappear...

Well, 5DM3 and friends are not getting a CFast anyways :D so maybe you should go for the FPGA if you have the know-how, time, etc...

7
Hardware and Accessories / Re: TASCAM DR-60D mkII DSLR Audio Recorder
« on: March 04, 2015, 05:52:04 PM »
@ibrahim, do you know if the pre's on this one are better, compared to the original DR?
I have the original and sometimes it's a problem with a NTG2 and sounds that are far away or close to you, but low in dB.

8
Share Your Videos / Re: Severe storm over Sydney
« on: March 04, 2015, 05:45:38 PM »
PFFFF... No comment!!!

9
Raw Video / Re: 5D3: 1.1.3 vs 1.2.3 Slow Mo Record Times
« on: March 04, 2015, 05:34:59 PM »
I speak from experience, and i believe it's mentioned in this thread: MLV (spanned) works a lot better (stable) on 1.1.3
This alone (and a few other) could be the main reason we'll end up having different branches 113, 123, etc...
I don't know what cards you got on you, but 1.1.3 is probably going to work better than 1.2.3.
Nuff said :) ?

10
Raw Video / Re: [ALREADY DONE] Seamless RAW/MLV recording +30 minutes
« on: March 04, 2015, 05:02:07 PM »
And another one! Props to the devs!!!

11
Raw Video Postprocessing / Re: The CinemaDNG Discussion (raw2cdng)
« on: February 28, 2015, 11:56:38 PM »
Testing it right now and it's as good as it gets!!!

12
Raw Video Postprocessing / Re: The CinemaDNG Discussion (raw2cdng)
« on: February 16, 2015, 04:40:21 AM »
Hey chmee, please, don't leave out spanned MLVs, when(ever) possible :)))
Cool new update though!!!

13
Hardware and Accessories / Re: VOTE: hardware CF-SATA adapter
« on: January 26, 2015, 08:43:50 PM »
@igor-lm this thread is a few days old... what do you expect, and @ItsMeLenny is right, why create a poll outside ML?
anyways: +1, and you should really go the prototype route
#1, 5DMIII

14
Feature Requests / Re: Light Trails mode
« on: January 23, 2015, 08:25:02 PM »
dmilligan just stole my whole response away :)

15
Modules Development / Re: Full-resolution silent pictures
« on: January 10, 2015, 12:26:10 AM »
This one "little feature" might never come out :(

16
Raw Video / Re: Advantages of 5D3 over 5D2 for ML Raw Video ?
« on: January 09, 2015, 11:53:08 PM »
We'll just have to wait and see what 5Ds will be all about, but it'll not be a cheap one!
So back to your topic: 5D2 still being used out there for what it's worth, but for me personally... higher FPS was the main difference.
So it's up 2 what you do or want to do with it...

17
Raw Video / Re: Advantages of 5D3 over 5D2 for ML Raw Video ?
« on: January 09, 2015, 01:48:21 AM »
The Axiom will be a thing of beauty, but he might need a bigger piggy or a bank loan: external monitor/recorder is already a few hundred + the body which will not be cheap...
I'm thinking 5DMIII's soon will be hit by a price drop due to Sony's, Samsung's and GH's... so unless you go for a all-new body, second hand M3's will be cheap very very soon. Think fast who u wanna sell your MII to ;)

18
General Help Q&A / Re: high fps video
« on: January 04, 2015, 06:08:31 PM »
@zniv, please remove your own post and READ/SEARCH before you hit "New topic"

19
Raw Video Postprocessing / Re: The CinemaDNG Discussion (raw2cdng)
« on: January 04, 2015, 12:51:45 PM »
Yeah, this one is a must! I thought it's a setting just for the 5DM3 & M2 ( as well as 50D ), but it's good to know it's also valid for the 7D

20
Good read!

21
Raw Video Postprocessing / Re: The CinemaDNG Discussion (raw2cdng)
« on: January 02, 2015, 07:55:35 PM »
hmmm, will try that and report back :) and for the black level in cam, i'm pretty sure it is ON since whenever g3gg0 implemented it, will double check though

P.S. the simple fix did it!!! a thing of beauty :) thanks a ton, and btw i'll be using your tool a lot, so if you need material off a 5dm3, i'll be around

22
Raw Video Postprocessing / Re: The CinemaDNG Discussion (raw2cdng)
« on: January 02, 2015, 02:20:29 PM »
Hi all, i though its about time i try raw2cdng and Davinci Resolve. Now this here is off of 1.6.5 and there's something totally wrong in what i'm doing, could you please shoot me :)


Five different exports:
1st (far left) - 12bit maximized
2nd - 16bit with chroma smoothing ON
3rd - 16bit with vertical banding ON
4th - 16bit with highlights fix ON
5th(far right) - 16bit (all fixes are OFF)

Those 5 were imported in Resolve 11.1 with just Color space changed to BMD Film and Highlight recovery On (which didn't do much)... pretty much nothing else!

23
Share Your Videos / Re: Full 5D3 raw hip-hop music CLIP project
« on: January 02, 2015, 11:51:18 AM »
what were your final export settings like?

24
Raw Video Postprocessing / Re: [WINDOWS] MLV to DNG Batch Converter v1.9
« on: January 02, 2015, 01:27:27 AM »
Maaaan i miss this tool! Not that i ever stopped using it, it's just that it could be improved further, A LOT :(

25
Share Your Videos / Re: Days Of Winter – 5D mk3 ML RAW
« on: December 29, 2014, 11:43:00 PM »
Chilly!
p.s. fix that link ;)

Pages: [1] 2 3 ... 10