Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - gideonplus

#1
OK I have it checked deeper and it occurs (in Still photography),

only when I have the fps activated(in video mode 25p->25p)

Using magiclantern-Nightly.2014May22.5D3123
modules loaded:
ETTR
ML_REC
ML_SOUND
ML_PLAY
#2
Using magiclantern-Nightly.2014May22.5D3123
The ETTR function does not work correctly(OVEREXPOSED)
#3
when using Black Magic camera CDNGs, the audio snaps automaticly
and any addional action is not requaierd.
is that the case for MLV DNGs when using v1.5.0beta3 ?
#4
By the way is the falsecolor function based on RAW as well ?
#5
At this time I am 10000Km away from my camera.
#6
5D mark iii 1.2.3
magiclantern-Nightly.2014Mar31.5D3123
#7
@g3gg0
Summery of my latest tests using MLV 5d3 1.2.3:

1. The MLV using setup as follows:
    1920x1080x25p (fps on/off)
    GD =Allow
    File>4GB =on
    Extra Hack =on
    Memory hack =on
    Fix black level =on
    Any other settings = default
    with the above setup the recording is stable as long as the clip doesnt the

    max capacity of the CF card (in that case it will corrupt the file).

    During recording of a debug msg shows some times on the screen:
    Faild queued 139 /*or other number*/    faild 1 (Reqeued)

2. You can reproduce the fault when using:
    File>4GB = OFF
    and by making long files (more then 2 minutes)
3. The above will also happen in case of card is formated as FAT32
    (64GB in camera)

magiclantern-Nightly.2014Mar31.5D3123
#8
@g3gg0
Does the 5Diii 123 nightly from mar 31 have your latest
changes to the MLV_REC ?
I still see this problem
ML ASSERT:
hdr->blockSize >= (sizeof(mlv_vidf_hdr_t) + hdr->frameSpace + frame_size)
at mlv_rec.c:1984 (process_frame), task Evf
lv:1 mode:3

Magic Lantern version : Nightly.2014Mar31.5D3123
Mercurial changeset   : 9765bab7157b (5D3-123) tip
Built on 2014-03-30 22:53:25 UTC by [email protected].
Free Memory  : 152K + 3747K
#9
@Jakobmen
You can have this problem back if you activate the "LV Display presets"
in ML Prefs menu
#10
in MLV crop mode(x3) it crashed after about 2 minutes with a lot of text writen on screen.

The LOGFILE:

ML ASSERT:
hdr->blockSize >= (sizeof(mlv_vidf_hdr_t) + hdr->frameSpace + frame_size)
at mlv_rec.c:1990 (process_frame), task Evf
lv:1 mode:3


Magic Lantern version : Nightly.2014Mar26.5D3123
Mercurial changeset   : 48e7ddebc1b9 (5D3-123) tip
Built on 2014-03-26 09:05:23 UTC by [email protected].
Free Memory  : 149K + 3753K

My card is Komputerbay 64GB x1000 , No Memory Hack,GD on,FPS
1920x1080 25p
#11
I had this problem only when the memory hack was on
#12
@a1ex
I have made some more clips with the memory hack on/off
and yes ,it is the source of the problem.
every time I turn it ON the green tint is there and stays on.
#13
The lens was zoomed out before recording.
The DNGs untouched.
#14
@g3gg0
x1 (NORMAL) and x3 lens zoomed out(with green tint and exp problem)
https://vimeo.com/89497294
#15
its on all frames.
I will later try to post a sample
#16
after exporting with mlv_dump and also viewing with MLRviewer
#17
Tested again the 1.2.3 on my 5D3 and some of the MLV files had
a green tint and in addition some where very dark
(compared to other files with same EXPO.)
using rec raw it was ok.
#18
I had Just tested the 1.2.3 on my 5D3 , Thanks for the Excellent work.
The raw rec was good up to 1920x1080x25p (Normal and crop mode).
But the MLV Raw doesnt work for me more than 1 min (4GB) and then it dumps some debug info about QUED something.
a sample of Logfile that was made to the root dir :

ML ASSERT:
hdr->blockSize >= (sizeof(mlv_vidf_hdr_t) + hdr->frameSpace + frame_size)
at mlv_rec.c:1990 (process_frame), task Evf
lv:1 mode:3
Magic Lantern version : Nightly.2014Mar16.5D3123
Mercurial changeset   : a9dced4a127b (5D3-123) tip
Built on 2014-03-16 13:26:55 UTC by [email protected].
Free Memory  : 165K + 3742K

#19
I had Just tested the 1.2.3 on my 5D3 , Thanks for the Excellent work.
The raw rec was good up to 1920x1080x25p (Normal and crop mode) on Koputerbay 64GB.
But the MLV Raw doesnt work for me more than 1 min (4GB) and then it dumps some debug info about QUED something.
a sample of Logfile that was made to the root dir :

ML ASSERT:
hdr->blockSize >= (sizeof(mlv_vidf_hdr_t) + hdr->frameSpace + frame_size)
at mlv_rec.c:1990 (process_frame), task Evf
lv:1 mode:3
Magic Lantern version : Nightly.2014Mar16.5D3123
Mercurial changeset   : a9dced4a127b (5D3-123) tip
Built on 2014-03-16 13:26:55 UTC by [email protected].
Free Memory  : 165K + 3742K
#20
Tragic Lantern / Re: 7D Raw Thread
March 07, 2014, 10:19:11 AM
The latest builds work solid for me (Thanks),
but I found a BAD\HOT pixel showing ONLY in crop(x3) mode (using MLV).
I can see it in resolve (DNG by MLVViewSharp) or in MlRawViewer

1. Why only in crop mode ?
2. What is the current solution for the above in order to export to resolve 10
#21
Raw Video Postprocessing / Re: The CinemaDNG Discussion
February 17, 2014, 12:13:54 PM
OK you have nailed the problem (the fix doent help it by the way but I have renamed the Dirctories)
some new thing:
in Premiere my futage the was 25fps was showing like it is 24fps
so I have checked the DMG metha data and in the FrameRate Field
it was 24fps which is wrong and should be 25fps

Another question that I have is:
Does in Resolve 10, the dng-sequence and audio file will be recognised automatically and in synch , As Well ?

Thanks
#22
Raw Video Postprocessing / Re: The CinemaDNG Discussion
February 16, 2014, 11:13:42 PM
OK its Win 7 64bit ntfs static same/different drives

* language English US
Command line window just for amoment and no change on UI

example Log file:
14.02.16 19:34:29 --  ----------- Application started ------------
14.02.16 19:34:29 -- - gamma loaded and set: 1
14.02.16 19:34:29 -- outputPath: E:\Gideons Pictures\2013_12_31
14.02.16 19:34:29 -- uniqueName: ML CDNG1.4.6 PHR
14.02.16 19:34:29 -- loading LogLists for 12bit
14.02.16 19:34:29 -- setting arrays for 12bit-Loglists
14.02.16 19:34:29 -- found and enabled mlv_dump
14.02.16 19:34:29 -- loaded GUI 1.4.9
14.02.16 19:35:20 -- **-- filesList_DragDrop started
14.02.16 19:35:20 -- * dragdropped File E:\Gideons Pictures\2013_12_31\M15-0911.MLV
14.02.16 19:35:20 -- is mlv-File and will be converted E:\Gideons Pictures\2013_12_31\M15-0911.MLV
14.02.16 19:35:20 -- converted to raw
14.02.16 19:35:20 -- is raw file
14.02.16 19:35:20 -- getting RAW-Attributes
14.02.16 19:35:49 -- **-- filesList_DragDrop started
14.02.16 19:35:49 -- * dragdropped File E:\Gideons Pictures\2013_12_31\M15-0918.MLV
14.02.16 19:35:49 -- is mlv-File and will be converted E:\Gideons Pictures\2013_12_31\M15-0918.MLV
14.02.16 19:35:49 -- converted to raw
14.02.16 19:35:49 -- is raw file
14.02.16 19:35:49 -- getting RAW-Attributes

Finaly NOTHING is done in output

#23
Raw Video Postprocessing / Re: The CinemaDNG Discussion
February 16, 2014, 05:46:16 PM
Yes it works OK only with the RAW file
#24
Raw Video Postprocessing / Re: The CinemaDNG Discussion
February 16, 2014, 05:15:47 PM
I did try that and it doesnt work
#25
Raw Video Postprocessing / Re: The CinemaDNG Discussion
February 16, 2014, 03:48:38 PM
no success
and it doesnt even show the file name in the Batch list
(the Op system is Win 7 64bit)