Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - samacochan

I have just bought a new 5D3 with firmware V1.3.3. How do I downgrade to V1.2.3 please. Where can I find the firmware ?
65 views as of this moment but nobody knows or not willing to help ???
Just curious to know why Magic Lantern download link for 5D3 nightly builds has a choice of v.113 and v.123.

If one doesn't want to upgrade firmware to 123, will the latest 113 version ML have the same old problem of permanent bootflag etc.
Oh. got it, thanks.
Sorry for asking a stupid question.. where is the help tab?
to look like what it appears to be on the homepage ??
Tragic Lantern / Re: Tragic Lantern for EOS M
March 05, 2014, 04:39:17 AM
I was checking the Shutter Count on my M. It showed 2K and then shutter counts and LV actuation. Then, what is the correct shutter counts. What is LV actuation ?
General Help Q&A / Re: 60D and ETTR
September 04, 2013, 02:07:55 AM
Quote from: stubbyd on September 04, 2013, 12:38:08 AM
Maybe a stupid question (I usually ask them)

But I note that one of the ML tweaks is "Auto ETTR (Expose To The Right)" - well at least according to the homepage of ML it is. But I can't find it anywhere? Can someone point me in the right direction please?

Are you using the nightly build ?
General Help Q&A / Dual ISO for stills in Canon 600D
September 03, 2013, 05:55:39 PM
I have installed the latest version of nightly build but cannot figure out how to activate Dual ISO in the menu. Please help.
General Help Q&A / Re: Canon 40D version available?
July 22, 2013, 08:10:05 PM

Click on the link to find out the development. It seems that the developer has been away for quite a while. Do not expect too much. Just keep shooting.
I have just purchased a "eye-fi Pro X2 16g". I wanna try installing a ML nightly build on it to work on a 600D. What is the best way to get it done ?

Anybody who have the same combination please kindly share your experience.

Feedback :  Just for sharing.

I have finally made up my mind to give it a try. Installed the 2.3 stable version onto the eye-fi card then made the card bootable by EOScard. Tested ok.  I then upgrade it to the nightly build (w/o raw video).   Haha, eye-fi pro X2 16G with magic lantern nightly build is now working on my 600D. Cannot believe that it is so easy.
Quote from: scrax on June 03, 2013, 06:47:54 AM
use a nightly build, it's self explanatory

Thank you for your help.
Any advices from the smart people here ?

Are there links discussing about this feature please ?
I follow the instructions but it shows only change of focus point and not the patterns. Can anybody help please ?

Or is this feature not available on 600D ?
Camera-specific Development / Re: Canon 40D
April 26, 2013, 06:14:10 PM
Consider to switch to 50D/550D and install ML to play with. The price drop of the 40D since last year was a significant amount(from $350 to $250 on the Craigslist in Canada) and so are the other two mentioned here. 40D is good but the other two are equally good in some other aspects.

Anyway, don't waste time waiting, just go out and click, click and click.
Camera-specific Development / Re: Canon 40D
April 11, 2013, 07:57:30 PM
Alex is right about it.

But is there an easier way to do it for the majority who may not know how to do with the source codes. Is there a simplified version with only a few functions e.g. intervalometer, auto WB control etc. to start with. I think most 40D owners will agree to pay to finance the development.

Any thoughts from the supporters of this thread.
Camera-specific Development / Re: Canon 40D
February 28, 2013, 12:03:54 AM
Quote from: ariznaf on February 21, 2013, 06:38:21 PM
I have just registered just to post here and give you a thumbs up.

Great effort, I have been long waiting for somebody to port ML to my 40D.
It would be great to be able to record video and many of the ML features in photography, like focus peaking, advance bracketing, focus bracketing, etc.

I am seeking for any news about it.

Please keep trying and thanks for your efforts.
I will pay for the firmware as soon as there is an early versiĆ³n.

I am afraid you will be disappointed. Come back in six months and see if I am wrong.
Camera-specific Development / Re: Canon 40D
December 11, 2012, 07:26:20 PM
Sounds good. Now more developers will be jumping in to explore the world of 40D ML and help to make our dream come true one day. I will not be selling my 40D definitely. I may be able to get $300 for the selling of it but keeping the camera and keep coming back to this thread everyday is like waiting for the birth of my baby and it's a lot of joy and fun.

Thank you guys.
Camera-specific Development / Re: Canon 40D
October 27, 2012, 03:48:19 PM
Quote from: dor1847 on October 26, 2012, 09:44:53 PM
hi, 40D owner here :)

i've been searching some information about a version of ML for the 40D for months and today i stumbled upon this thread..

i signed in just to say that you guys are doing an amazing job!
unfortunately, im not very familiar with all this programming stuff so the only thing i can do is waiting for you to finish working on it :D
if there is anything i can do to help you guys with the project that does not involve taking a risk of bricking my cam (its my only one) ill be glad to do it!

i hope to hear some good news soon!

Good Luck :)

A donation will be a good gesture of support.
Camera-specific Development / Re: Canon 40D
October 05, 2012, 09:29:09 PM
Quote from: jplxpto on October 05, 2012, 02:23:00 AM
The my_gui_main_task seems to be working... ;)

  5938: 15903.631 [MC] M:1,ID:E(1)
  5939: 15903.676 [BIND] Switch (14, 1)
  5940: 15903.714 [GUI_E] GUI_Control:1 0x0

  5941: 15903.898 [JP] (50/3) my_gui_main_task:85: EVT 372[0]: p=1
  5942: 15903.942 [JP] (50/3) my_gui_main_task:90: EVT 372 *o=0x0/0x0/0x0
  5943: 15903.973 [JP] (50/3) my_gui_main_task:93: EVT 372 a=0
  5944: 15935.627 [GUI] DlgPlayMain.c ROTATE_ELECTRONIC_SUB_DIAL_RIGHT

  5945: 15935.719 [GUI] GUI_GetTotalFileInDrive hDriveHandle(0x50000000)
  5946: 15935.804 [FC] _FC_GetDriveObject (1,1)
  5947: 15935.884 [GUI] GUI_GetTotalFileInDrive FM_GetDriveObject Num(5)
  5948: 15935.999 [GUI] GUI_GetTotalFileInDrive hDriveHandle(0x50000000)
  5949: 15936.053 [FC] _FC_GetDriveObject (1,1)
  5950: 15936.104 [GUI] GUI_GetTotalFileInDrive FM_GetDriveObject Num(5)
  5951: 15936.160 [GUI] ChangeMultiCurrentPositionForMove hOldFile(0x51906950)
  5952: 15936.213 [GUI] GUI_GetTotalFileInDrive hDriveHandle(0x50000000)
  5953: 15936.253 [FC] _FC_GetDriveObject (1,1)
  5954: 15936.297 [GUI] GUI_GetTotalFileInDrive FM_GetDriveObject Num(5)
  5955: 15936.334 [FC] _FC_GetFirstFileHandle
  5956: 15936.368 [FC] ctgFileGetFirstFileHandle (1, 0, 0, 0)

  5957: 15936.958 [JP] (50/3) my_gui_main_task:85: EVT 373[4]: p=0
  5958: 15937.035 [JP] (50/3) my_gui_main_task:90: EVT 373 *o=0x2050000/0x7f3c2c/0x6c
  5959: 15937.070 [JP] (50/3) my_gui_main_task:93: EVT 373 a=0
  5960: 15968.951 [JP] (50/3) my_gui_main_task:85: EVT 374[4]: p=0
  5961: 15969.028 [JP] (50/3) my_gui_main_task:90: EVT 374 *o=0x2050000/0x7f3d24/0x6c
  5962: 15969.061 [JP] (50/3) my_gui_main_task:93: EVT 374 a=0

  5963: 16000.466 [GUI] GUI_SetFileIndexInDrive(1)
  5964: 16000.993 [JP] (50/3) my_gui_main_task:85: EVT 375[4]: p=0
  5965: 16001.076 [JP] (50/3) my_gui_main_task:90: EVT 375 *o=0x2050000/0x7f3e1c/0x6c
  5966: 16001.115 [JP] (50/3) my_gui_main_task:93: EVT 375 a=0
  5967: 16032.895 [JP] (50/3) my_gui_main_task:85: EVT 376[4]: p=0
  5968: 16032.969 [JP] (50/3) my_gui_main_task:90: EVT 376 *o=0x2050000/0x7f3f14/0x6c
  5969: 16033.003 [JP] (50/3) my_gui_main_task:93: EVT 376 a=0
  5970: 16064.777 [JP] (50/3) my_gui_main_task:85: EVT 377[4]: p=0
  5971: 16064.855 [JP] (50/3) my_gui_main_task:90: EVT 377 *o=0x2050000/0x7f400c/0x6c
  5972: 16064.890 [JP] (50/3) my_gui_main_task:93: EVT 377 a=0
  5973: 16096.291 [GUI] GUI_GetTotalFileInDrive hDriveHandle(0x50000000)

I think that once the problem of LCD is resolved, we can say that we have the ML running on 40D :)

Be patience, ... we still have much work ahead!
Good job. I am waiting.
Really hope that canon will have similar product for my 600D. Don't know if it can be modified to work on a canon body. Btw, may be a diy is possible too.