Magic Lantern Forum

Developing Magic Lantern => Camera-specific Development => Topic started by: nanomad on June 01, 2013, 12:55:41 AM

Title: Canon 700D / T5i
Post by: nanomad on June 01, 2013, 12:55:41 AM
Nightly builds: http://builds.magiclantern.fm/

Installation:
1) Format the card from the camera.
2) Make sure you are running Canon firmware 1.1.3 (http://pel.hu/down/v113-t5i-700d-x7i-win.zip).
3) Copy ML files on the card and run Firmware Update.

Uninstallation:
1) Run Firmware Update from your ML card.
2) Follow the instructions.

(http://a1ex.magiclantern.fm/bleeding-edge/new-installer.png)




Original post
QuoteSuccesfully dumped the 100D and 700D. They look very similar to the 650D/EOSM. I've started the 700D initial port.

(I'll provide proper credit tomorrow, I'm off to sleep now)
Title: Re: Canon 700D / T5i
Post by: godashram on June 01, 2013, 01:35:27 AM
Sweet!
Title: Re: Canon 700D / T5i
Post by: red5446 on June 01, 2013, 07:34:07 AM
great news!
Important thing for videographers here is to perform a benchmark of the sd card to confirm if it has the same limit of t4i.
can you share some info about that nanomad? :)
Title: Re: Canon 700D / T5i
Post by: nanomad on June 01, 2013, 08:26:16 AM
The controller looks identical :-(
Title: Re: Canon 700D / T5i
Post by: Aborgh on June 02, 2013, 10:14:53 AM
Quote from: nanomad on June 01, 2013, 08:26:16 AM
The controller looks identical :-(

They are in fact 90% similar! 700D has only gone through plastic surgery. It is only the exterior that has changed an minor software changes.
Title: Re: Canon 700D / T5i
Post by: nanomad on June 04, 2013, 10:48:17 AM
Don't go OT please, use this thread insted :)

http://www.magiclantern.fm/forum/index.php?topic=6140.0
Title: Re: Canon 700D / T5i
Post by: a1du on June 08, 2013, 06:55:38 PM
Nanomad!! Thank you so much for taking the time to analyze t5i firmware. Looking forward to it and if you need any tester please let know. I am not a dev in any way shape or form, but would be happy to learn  :)

Many thanks!!
Title: Re: Canon 700D / T5i
Post by: styler2go on June 09, 2013, 12:58:49 PM
I would also like to help alpha testing or something else.
I am a web and Windows developer, so maybe i could help in any way.

Is there any ETA for the 700d ML? Would be great to know.
Title: Re: Canon 700D / T5i
Post by: nanomad on June 09, 2013, 02:16:22 PM
I've committed what should be a working, untested, port of the 700D. It should work as good as the 650D one unless I screwed it up.
It's a "blind" port, as I don't own a 700D myself.

So, what I need right now is ONE tester with C background and a 700D on his hands. If you think you fit this description throw a PM at me.

Extra points if you're willing to take care of the 700D port yourself.
Title: Re: Canon 700D / T5i
Post by: styler2go on June 10, 2013, 06:43:39 PM
Will there be a first alpha release soon?
Will it support touch functionality?

I have also sent you a PM.

Greetings, Styler2go

And thank you so much, nanomad!
Title: Re: Canon 700D / T5i
Post by: a1ex on June 10, 2013, 07:07:14 PM
Looks like you didn't read the post above. We don't have a 700D, and since we have plenty of things to do with the other cameras, we don't have any plans to buy one anytime soon.

Therefore, nanomad asked if somebody with C skills can volunteer to port ML on 700D. It's likely very similar to 650D, we can provide some advice about the porting process, but that's pretty much it.

From the massive interest in ML for 700D (10 retweets), you should understand that this port has a very low priority for us. Don't expect any kind of release anytime soon.

The good news: porting ML is a lot easier than you may think; a lot of things are figured out by trial and error, enabling features, seeing what works and what not, tweaking the source code here and there and so on. You need some basic C skills, common sense, a lot of spare time and the desire to learn by exploring some unknown territory.
Title: Re: Canon 700D / T5i
Post by: styler2go on June 10, 2013, 10:24:10 PM
I am very sorry. I just misunderstood his post.

I am not that good that i could generate my own 700d versions. I am too afraid to destroy the camera.

I can understand that there is no high priority on this camera so I will just wait.
Title: Re: Canon 700D / T5i
Post by: dcarneiro on June 12, 2013, 01:41:54 AM
Hi,
How about 100D.  I have one and have good C skills.
Title: Re: Canon 700D / T5i
Post by: asilnevs on June 13, 2013, 10:13:05 PM
Hi, I just bought my first HDSLR camera, the 700D a week ago and yesterday I came across this amazing Magic Lantern firmware update.
I hope you can manage this firmware to work with the 700D in the future.
But first I have to read a lot of things on this forum concerning the firmware.
Thanks for all the effort to make this happen.
Title: Re: Canon 700D / T5i
Post by: Science on June 14, 2013, 10:40:45 PM
Hello 700D :)
(http://i.imgur.com/vX9iVaT.jpg)
Title: Re: Canon 700D / T5i
Post by: Greg on June 14, 2013, 11:00:28 PM
Quote from: Science on June 14, 2013, 10:40:45 PM
Hello 700D :)

:o wow ;D
Title: Re: Canon 700D / T5i
Post by: godashram on June 14, 2013, 11:12:58 PM
we have hello world?! awesome!

too bad I have ZERO C skills..
Title: Re: Canon 700D / T5i
Post by: Science on June 15, 2013, 03:32:24 PM
I guess that looks good, doesn't it :)
(http://i.imgur.com/vOGqMIG.jpg)
Title: Re: Canon 700D / T5i
Post by: a1du on June 15, 2013, 07:35:37 PM
Woohoo! Well done for getting on with it. If everything is sort of ok and need testers to TShoot drop me a pm as more than happy to help.

Regards

Du
Title: Re: Canon 700D / T5i
Post by: CogitoFilm on June 16, 2013, 02:38:44 AM
Is that a 700D with ML firmware?  ::) :D
Title: Re: Canon 700D / T5i
Post by: styler2go on June 16, 2013, 05:46:20 PM
Semms like it is running on the 700D...  ;-)

Science and nanomad are doing great work!

http://styler2go.de/2013-06-16 17.33.28.jpg (http://styler2go.de/2013-06-16%2017.33.28.jpg)
Title: Re: Canon 700D / T5i
Post by: a1du on June 16, 2013, 08:20:17 PM
Quote from: styler2go on June 16, 2013, 05:46:20 PM
Semms like it is running on the 700D...  ;-)

Science and nanomad are doing great work!

http://styler2go.de/2013-06-16 17.33.28.jpg (http://styler2go.de/2013-06-16%2017.33.28.jpg)

Are you running it too? Or is that science's photo?

How is it? Any bugs found yet?

Title: Re: Canon 700D / T5i
Post by: Science on June 16, 2013, 10:28:14 PM
Quote from: a1du on June 16, 2013, 08:20:17 PM
Are you running it too? Or is that science's photo?

How is it? Any bugs found yet?
That is him running my vesion :)
Well, functionality is limited, keep in mind this is pretty much a pre-alpha, including bugs.
Title: Re: Canon 700D / T5i
Post by: a1du on June 16, 2013, 10:54:45 PM
Science, Amazing work so far! The fact that someone is taking time to do this is more than I  expected so early on  :)

Many Thanks

Du
Title: Re: Canon 700D / T5i
Post by: TrOm@ on June 17, 2013, 08:21:31 AM
Amazing, Excellent!! Thank you for spending time on this "new" model. I hope to test a ML firmware a day for 700D
Title: Re: Canon 700D / T5i
Post by: CogitoFilm on June 17, 2013, 09:10:30 AM
Thank you Science and Nanomad! Really appreciate your work!  ;D
Title: Re: Canon 700D / T5i
Post by: mohanplays on June 18, 2013, 07:44:43 PM
I saw a 700D with ML installed... can anyone tell me where to download ML for 700D
Title: Re: Canon 700D / T5i
Post by: Science on June 18, 2013, 08:23:22 PM
Quote from: mohanplays on June 18, 2013, 07:44:43 PM
I saw a 700D with ML installed... can anyone tell me where to download ML for 700D
You can compile it yourself, however it's currently too unstable, i'm not recommending it for daily shooting unless you want to take the battery out every second shot
Title: Re: Canon 700D / T5i
Post by: CogitoFilm on June 20, 2013, 09:23:36 AM
Really looking forward to the stable, when do you think we could expect? FYI I am truly grateful to the work your doing!
Title: Re: Canon 700D / T5i
Post by: a1ex on June 20, 2013, 09:27:56 AM
It's right in the FAQ: http://wiki.magiclantern.fm/faq?&#troll_questions

;)
Title: Re: Canon 700D / T5i
Post by: CogitoFilm on June 20, 2013, 10:41:51 AM
indeed  ;D
Title: Re: Canon 700D / T5i
Post by: godashram on June 22, 2013, 11:40:28 PM
I'm actually quite excited about this.

I can't afford to test until after Comic con, as I need my cam at 100% for that, but am available after.
Title: Re: Canon 700D / T5i
Post by: ricardoalvez on July 02, 2013, 05:53:36 PM
Hello, I have a 700d and I can test this firmware. But where can I find a tutorial to download it and install?
Title: Re: Canon 700D / T5i
Post by: godashram on July 02, 2013, 06:14:49 PM
look a few posts up... it's unstable and you have to compile it yourself
Title: Re: Canon 700D / T5i
Post by: Slip on July 03, 2013, 12:12:58 AM
without  ML I want  throw 5i to the trash   :(
Title: Re: Canon 700D / T5i
Post by: ricardoalvez on July 03, 2013, 04:12:53 AM
same news?
Title: Re: Canon 700D / T5i
Post by: wacru1 on July 16, 2013, 06:23:50 PM
i'm getting my t5i today.

any update on the t5i version?
Title: Re: Canon 700D / T5i
Post by: TrOm@ on July 16, 2013, 07:49:10 PM
Be patient,....... very patient. currently focuses on the developers as the T4i/650D.
Title: Re: Canon 700D / T5i
Post by: mrmyth on August 03, 2013, 08:59:41 AM
Hi:

I'm new to the forum so sorry if I am not posting this in the right place.

I have a Canon T5i and I would like to make the ISO settings more incremental. Is Magic Lantern what I need? Is it not ready for the T5i yet?

Sorry if this has been asked a lot.

MrMyth
Title: Re: Canon 700D / T5i
Post by: godashram on August 05, 2013, 08:03:06 PM
ML is in a pre alpha state at the moment, so it's not very stable.

As for what you need, you can read up in the documentation
http://www.magiclantern.fm/documentation
Title: Re: Canon 700D / T5i
Post by: dal on August 09, 2013, 12:05:32 AM
So I've compiled ML for the 700d. But the installer .fir is not generated. I tried the autoboot method and ran make_bootable.sh. This does not work for some reason and ML does not boot. Tried it on two spare cards I had (512mb and 2gb) Looks lite stuff is written to the sdcard with dd.

Any ideas?

EDIT:
I've verified in a hexeditor that offset 0x40 and 0x2b contain the correct strings as described for the FAT16-filesystem here: http://magiclantern.wikia.com/wiki/Autoboot

But I'm not even getting a hanged boot or anything.  Which revision should I build? Built the tip a couple of days ago of the unified branch. I set to only build for 700d in the Makefile. I'm stuck and this sucks.

EDIT2:
It has come to my attention that I've not set the bootflag in my 700d. Since the .fir is not getting built I wonder how you guys set it?! This would probably solve my problem :)
Title: Re: Canon 700D / T5i
Post by: TheUnkn0wn on August 10, 2013, 12:03:29 PM
Just pushed 700D fixes/updates. We can now record RAW video ;)

https://bitbucket.org/hudson/magic-lantern/pull-request/175/700d-multiple-fixes-updates/diff

(http://puu.sh/3YnTf.jpg)
Title: Re: Canon 700D / T5i
Post by: ricardoalvez on August 10, 2013, 07:36:37 PM
Great Work man!!!
Title: Re: Canon 700D / T5i
Post by: TheUnkn0wn on August 11, 2013, 12:48:52 AM
- Fixed HDR video recording
- AutoETTR works
- Fixed RAW video squeeze factor
- Added a few more features

quick update on the 700Ds raw capabilities, I can record raw video continuously at 720p (37.5MB/ps) using a SanDisk 64GB Extreme SDXC card.
Title: Re: Canon 700D / T5i
Post by: godashram on August 11, 2013, 06:30:44 PM
that is awesome! how's ML's stability?
Title: Re: Canon 700D / T5i
Post by: TheUnkn0wn on August 12, 2013, 02:19:47 PM
To be honest, after fixing a few things I haven't experienced any crashes when using it normally.
Title: Re: Canon 700D / T5i
Post by: godashram on August 12, 2013, 05:41:11 PM
that is good to hear!
Title: Re: Canon 700D / T5i
Post by: satriani on August 15, 2013, 11:49:00 PM
Hey guys,
I have a 650D and my Server compile daily builds for 650D. If you wish I can compile builds for your device, but warning I can't test the build's befor release, because I don't have 700D for testing.
Here is a Link with a first build for 700D (https://www.dropbox.com/sh/i95vmqmkeqky3q5/wncQd-4gn2)
Title: Re: Canon 700D / T5i
Post by: dal on August 16, 2013, 09:31:28 AM
Also there is no public 700d .fir to set the bootflag in the camera so this will not work :/

I'm new to ML and it took a while for me to figure that out since the documentation is not very clear on how that works. And the scripts are not public either.. :/

If anyone could be kind to post the .fir I'd be interested, pm or otherwise. I can't test my builds until then :/

Thnx
Title: Re: Canon 700D / T5i
Post by: TheUnkn0wn on August 16, 2013, 11:37:19 PM
Quote from: satriani on August 15, 2013, 11:49:00 PM
Hey guys,
I have a 650D and my Server compile daily builds for 650D. If you wish I can compile builds for your device, but warning I can't test the build's befor release, because I don't have 700D for testing.
Here is a Link with a first build for 700D (https://www.dropbox.com/sh/i95vmqmkeqky3q5/wncQd-4gn2)

My 700D changes haven't been pushed yet which means the current one on Magic Lantern is un-usable. You could however create builds from my fork : https://bitbucket.org/theunkn0wn/magic-lantern

P.S : Got Dual-ISO working on the 700D

(http://img18.imageshack.us/img18/4614/lvyg.jpg)
Title: Re: Canon 700D / T5i
Post by: dal on August 16, 2013, 11:44:46 PM
I've built from your branch a couple of days ago and it's still unusable if the bootflag in the 700d is not set, how should I do this? Am I missing something?
Title: Re: Canon 700D / T5i
Post by: RenatoPhoto on September 29, 2013, 05:28:02 PM
FOR RAW VIDEO DISCUSSIONS GO HERE:

700D / T5i RAW video
http://www.magiclantern.fm/forum/index.php?topic=8550.0
Title: Re: Canon 700D / T5i
Post by: TheUnkn0wn on October 05, 2013, 10:13:42 PM
Well after taking a break I'm in the mood to start continuing my work maintaining the 700D of ML ;)

Priority at the moment :

- Pink Dots on RAW video (work out which method/solution gives the best results)
- Sound (this might be a bit tricky since a few things have changed)
- 10-bit RAW video recording? (I will experiment to see what I can achieve or fail, 700D's DIGIC5 could just be powerful enough for this?)
Title: Re: Canon 700D / T5i
Post by: godashram on October 06, 2013, 10:13:33 AM
sound would be EPIC! good luck!
Title: Re: Canon 700D / T5i
Post by: baaaa1023 on October 06, 2013, 11:08:47 AM
Hi i am Kind of New here and i would really like To try ML for my canon 700d what do i need To do? And yes i know about the risks.
Title: Re: Canon 700D / T5i
Post by: baaaa1023 on October 07, 2013, 01:22:25 PM
Quote from: baaaa1023 on October 06, 2013, 11:08:47 AM
Hi i am Kind of New here and i would really like To try ML for my canon 700d what do i need To do? And yes i know about the risks.

Nevermind I managed... Its good work I had no stability problems so far
Title: Re: Canon 700D / T5i
Post by: wacru1 on October 07, 2013, 06:00:05 PM
thanks un. great work. you made my vacation in august with the 700d ml.

audio would be super.
Title: Re: Canon 700D / T5i
Post by: Rewind on October 16, 2013, 08:37:05 PM
Guys would you mind to help me a bit?

Just turn the 700D on in video mode with raw_rec enabled, go to ML menu — Debug — Dump ROM and RAM, push it, wait until dumping is done, then go to your SD card — ML — LOGS, and just sed me the ROM1.BIN

Just a couple of minutes, PM me please. I need this for 650D port.

_______________________________________________________
UPD. Nevermind, problem solved (thanks to mk11174). Thank you.
Title: Re: Canon 700D / T5i
Post by: TheUnkn0wn on October 17, 2013, 12:57:56 PM
What do you need help with? (what are you trying to port over to the 650D?)
Title: Re: Canon 700D / T5i
Post by: gius.prenc on October 18, 2013, 07:38:40 PM
Hi;

I have been successfully using ML on a 600D, and today I just installed it on my new 700D.

However, I am able to run it only up to the first format operation. That is, when I format the sd card (clearly by choosing to keep ML), the operation ends saying "writing bootflags", then the camera shuts down.

When I turn it on again, I cannot start ML anymore. To be able to run it again, I need to make the SD card bootable again (I use MacBoot).

Any help on this?

Thanks.

Regards,

G.
Title: Re: Canon 700D / T5i
Post by: a1ex on October 18, 2013, 08:53:31 PM
Look in bootflags.c (hint: it's not very easy, but I'm sure TheUnkn0wn or other skilled people can solve it).
Title: Re: Canon 700D / T5i
Post by: gius.prenc on October 19, 2013, 01:02:08 AM
....I installed one of the compiled versions, so there was no .c file in the zip archive.

You are referring to the source code, right?

Thanks.

Regards,

G.
Title: Re: Canon 700D / T5i
Post by: TheUnkn0wn on October 23, 2013, 12:37:43 PM
I'll look into it, just haven't had any time lately :S
Title: Re: Canon 700D / T5i
Post by: Traste on October 26, 2013, 01:10:10 PM
Hi The UnKnown,

I would like to donate specifically to the development of ML for 700D, do you have any donation box? :)

All the best,
Traste
Title: Re: Canon 700D / T5i
Post by: Traste on October 26, 2013, 03:32:47 PM
Donation sent!

Anyone else interested in adding motivation towards this, here is the link: http://bit.ly/1hi7k2E
Title: Re: Canon 700D / T5i
Post by: tony_black on October 28, 2013, 07:56:25 AM
Hi everyone!
I have tried to instal ML but failed miserably. The steps I went through were as follows (copied from this thread www.magiclantern.fm/forum/index.php?topic=8550.50 (http://www.magiclantern.fm/forum/index.php?topic=8550.50))
--
low-level format the card in the camera.
on the PC, extract the 700...zip file to the sdcard.
with the card still plugged into the PC, run eoscard, check both eos_develop and bootdisk. it should list the fir file. click save. it should say "write successful"

no other steps.

put the card in the camera and turn it on. you should see the normal info screen, then the ml bars top and bottom. press the trash icon to get the ml menus.
--
So I did as the instruction suggests but for some reason the needed fir is not listed in the eoscard list, what I see is either "unified 2.3" or "ports in progress" with 1100d or 5d alpha etc, no 700d in the list
to be clear - the ML zip was extracted to the card, so there is a folder "magiclantern...etc"
any help is appreciated!

UPD sorted itself out somehow :=)
Title: Re: Canon 700D / T5i
Post by: franknitty69 on November 11, 2013, 09:11:03 AM
just got a t5i. put magic lantern on it the same day. so far so good. you guys are amazing.
Title: Re: Canon 700D / T5i
Post by: thanulee on November 12, 2013, 06:44:11 PM
Hello guyz! Is there any link with the latest tested version on 700D? thanx
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on November 12, 2013, 06:50:33 PM
The term "tested" doesn't match ML development phases. Go to top of page, open Downloads, go to "Browse Nightly Builds" (after reading and trying to understand what you are dealing with) and browse 700D's build page.

Ciao
Walter
Title: Re: Canon 700D / T5i
Post by: BASSPRO on November 16, 2013, 10:00:22 AM
How to Setup Card for Magic Lantern using iMac:

First download the MacBoot utility from internet, then;

1. Disk Utility: Erase everything on SD card.
2. MacBoot - Use third option - "DSLR Bootable"
3. Copy from directory  'Magic Lantern" - 700D.111.16082013 (or whatever version) - ML to root of SD Card. Make sure auto exe file is in the root else won't boot.
4. Make sure MacBoot remains open when copying files.


Done
Title: Re: Canon 700D / T5i
Post by: franknitty69 on November 17, 2013, 05:35:14 PM
quick question about un-install.

when i install ml, i don't get that screen to turn the mode knob to enable the bootflag. i use macboot and ml works.

so to un-install, when i go to update the firmeware, nothing related to ml appears. so my question is since i used macboot,  is an uninstall, just formatting the card?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on November 17, 2013, 06:53:13 PM
There are 3 requirements for ML to run:
- Camera's bootflag set.
- Bootable memory card
- ML files located on the card

Format the card and the card is no longer bootable and ML won't run at startup. The camera's bootflag will not be affected. This will cause a slight delay for the camera's startup sequence. If this delay doesn't cause any trouble there is no cause to change it. If this delay is not tolerable you have to reset the flag.

Ciao
Walter
Title: Re: Canon 700D / T5i
Post by: mva on November 17, 2013, 07:01:29 PM
Quote from: Walter Schulz on November 17, 2013, 06:53:13 PM
If this delay is not tolerable you have to reset the flag.

RenatoPhoto (if I understood him correctly) recently wondered whether the 700D/T5i might have the same problem as the 5D3 -- namely, that there's no safe way to disable the bootflag:
http://www.magiclantern.fm/forum/index.php?topic=7125.msg88849#msg88849

(More here: http://www.magiclantern.fm/forum/index.php?topic=8355.0 )

Do you or anyone else know whether there is a way to disable the bootflag on the 700D/T5i?
Title: Re: Canon 700D / T5i
Post by: gius.prenc on November 20, 2013, 11:00:20 PM
Hi;

I do not know what happened, but my 700D won't boot anymore. Even with no card inserted, it shows the following message: "Firmware update program: Update file cannot be found. Please check the memory card and reload the battery and try again". (The same message is shown also with sd card inserted.)

I just removed the sd card to upload a new version of ML, and then the camera started showing this strange behavior. What is going on? Is there a way to reset the camera?

Any help/hint would be really appreciated.

Regards,

G.
Title: Re: Canon 700D / T5i
Post by: gius.prenc on November 20, 2013, 11:37:09 PM
....ok, formatting again the sd card on the PC and running again the EOScard utility solved the issue.

Anyway, the issue appears again each time I format the card on the camera. In fact, the formatting process blocks with a "Writing Bootflags" message; then, I am forced to remove the battery, and when I place it back the camera does not start anymore (it hangs up on the "Firmware update" message of my previous post).

Is this behavior normal? Am I not supposed to format the card on the camera?

Also, the camera does not boot with a card with no ML on it....is this related to the bootflag "issue" stated few post above?

Thanks.

Regards,

G.
Title: Re: Canon 700D / T5i
Post by: RedHerring on November 21, 2013, 07:06:12 AM
I am not able to disable the bootflag on my T5I.

Update firmware with same fir that I used to enable it. I get no green txt.
I switch from M to something else. No effect.

If I want to run without ML I remove the bootable flag from the SD.
Title: Re: Canon 700D / T5i
Post by: mva on November 21, 2013, 08:25:22 AM
Quote from: RedHerring on November 21, 2013, 07:06:12 AM
I am not able to disable the bootflag on my T5I.

You need to ask the devs whether it's even possible. There have been some suggestions that it may not be. Good luck.
Title: Re: Canon 700D / T5i
Post by: gius.prenc on November 21, 2013, 10:25:59 AM
Quote from: RedHerring on November 21, 2013, 07:06:12 AM
If I want to run without ML I remove the bootable flag from the SD.

....how do you do that? With the EOScard tool, by deselecting the bootable checkbox options? My problem is that I tried in this way, but then the camera does not boot....To have it work again, I am forced to make the sd card bootable again (and place back on the sd card the ML files).

Note that I do not have any .fir file on the SD card (there is no .fir file contained in the .zip archive for the nightly build for the 700D).

Thanks.

Regards,

G.
Title: Re: Canon 700D / T5i
Post by: TheUnkn0wn on November 28, 2013, 02:42:22 AM
Disabling the bootflag is very easy, one line of code in fact. The problem arises because of how risky it is to disable it, the devs don't want people claiming ML bricked their camera and so to prevent this the ability has been taken away for now until a more reliable way has been found.

a1ex should be able to create a .fir to disable the bootflag safely.
Title: Re: Canon 700D / T5i
Post by: mva on November 28, 2013, 06:38:23 AM
Quote from: TheUnkn0wn on November 28, 2013, 02:42:22 AM
Disabling the bootflag is very easy, one line of code in fact. The problem arises because of how risky it is to disable it, the devs don't want people claiming ML bricked their camera and so to prevent this the ability has been taken away for now until a more reliable way has been found.

a1ex should be able to create a .fir to disable the bootflag safely.

This seems entirely speculative to me (aside from the fact that the bootleg can be disabled with one line of code).

Why has the "problem not arisen" with any other camera besides the 5D3 (and now possibly the 700D too)?

Why were .fir files for disabling the bootflag created in the earliest stages for all other cameras, but with the 5d3 it's been five months and more than five threads with polite inquiries from numerous people to which the response has been pretty much utter silence?

Would it be "feeding the trolls" for A1ex to say whether or not there are special concerns with preparing a .fir for the 5D3 (and possibly the 700D too)?

That would be a bit pathetic. I give A1ex more credit than that, and suspect he has more serious reasons for having waited this long with the 5D3, unlike the other cameras, and for deciding not to respond to any inquiries about the issue. Still, I think he needs to find a way to say something about it (and possibly the 700D too).
Title: Re: Canon 700D / T5i
Post by: ortigonover on December 20, 2013, 06:42:15 PM
Hi everybody, I have posted this video-guide with everything you need!
if you follow the steps you will be able to get ML in your canon 700D / t5i in a quite easy way!!



Remember that the version is not even Beta, therefore could be not stable.
I noticed that audio settings for ML is not present for the moment!
Title: Re: Canon 700D / T5i
Post by: FilipeNico on December 23, 2013, 09:31:43 PM
Quote from: TheUnkn0wn on November 28, 2013, 02:42:22 AM
Disabling the bootflag is very easy, one line of code in fact. The problem arises because of how risky it is to disable it, the devs don't want people claiming ML bricked their camera and so to prevent this the ability has been taken away for now until a more reliable way has been found.

a1ex should be able to create a .fir to disable the bootflag safely.


I was able do disable the magic lantern in 700d because in one of the formats of the card (without erasing ML) the camera gave an error while wrting the bootflag... after restarting the camera... magic lantern was gone...

and now that i've tried it i won't be installing it again until i have some official or stable installers/unninstallers.

MAYBE if i need to much i'll get it again before that...
Title: Re: Canon 700D / T5i
Post by: Mar on December 26, 2013, 12:20:44 AM
Hi guys! I just bought 700d with 1.1.3 firmware and can't install ML on it. Is this real? There is no information about firmware at all
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on December 26, 2013, 12:41:56 AM
Top of page -> Downloads -> Browse Nightly Builds ->
700D.111
         ^^^ indicates required firmware version

Firmware version 1.1.3 is not available via Canon's support page yet. 1.1.1 is not downloadable and never will be (at least officially) because it's the first firmware version delivered with the cam and not a single "initial" firmware version has ever been made available for end users.
So you're pretty much lost until Canon will officially release 1.1.3 *and* after the developers coded ML for this firmware version.
And don't ask for a time frame because there will be none. Sorry!

Ciao
Walter
Title: Re: Canon 700D / T5i
Post by: godashram on December 26, 2013, 07:28:30 PM
yeah, unless the new firmware is dumped, there is nothing you can do. Curious what Canon updated with this small rev jump.
Title: Re: Canon 700D / T5i
Post by: TheUnkn0wn on December 27, 2013, 03:54:07 PM
New firmware? Interesting!
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 05, 2014, 10:54:01 AM
I have been looking for addresses for audio and this is what I have so far.

I was able to get beep working fine, I can change volume, type and frequency just fine.

With CONFIG_AUDIO_CONTROLS uncommented
Audio meters working but freeze cam when you record and the meters stop working if you run a beep test.
Audio remote shot works in photo mode, in record mode it will freeze cam once starts to record.

With CONFIG_AUDIO_CONTROLS commented and defining meters and remote shot
Audio meters only work while recording no freeze cam
Audio remote shot works while recording no freeze cam, doesn't work in Photo mode.

Need to try FilterRec fix to see if it helps, pretty sure I found correct address just need to add the code for it to test.

Of course Wav recording does not record anything, it works, just records nothing.

At least meters sort of work and beep works good.

I have been using 600D as Ref and I am pretty sure my stubs are correct, threshold was differ to find but Im guessing it is good since meters are working, seems like something else freezes cam because even if I disable meters it still freezes when I record if I have CONFIG_AUDIO_CONTROLS uncommented.
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 05, 2014, 06:41:42 PM
Anyone interested in trying out this 700D build that adds Beep, Meters and MLV_SND to MLV_REC here is the link to what I have working so far.

The only way I could get it going to where I could record with MLV_SND was to use Tragic Lantern source for building, after finding the stubs and enabling the features, they seem to work fine so far.

I have not tested headphone monitor yet.

Also, meters are not yet working until your recording, but they do work and you do get sound with MLV_REC.

UPDATE: Link no longer good, but should be in nightly since I commited everything needed and was merged. 8]
https://bitbucket.org/mk11174/magic-lantern/downloads/ML_700D_TL_Audio_Jan_5_2014.zip (https://bitbucket.org/mk11174/magic-lantern/downloads/ML_700D_TL_Audio_Jan_5_2014.zip)
Title: Re: Canon 700D / T5i
Post by: otto8 on January 06, 2014, 01:13:10 PM
Amazing news!  :D I will try in the evening on my 700D... Thank you!
Title: Re: Canon 700D / T5i
Post by: TheUnkn0wn on January 07, 2014, 12:06:00 AM
Quote from: mk11174 on January 05, 2014, 10:54:01 AM
I have been looking for addresses for audio and this is what I have so far.

I was able to get beep working fine, I can change volume, type and frequency just fine.

With CONFIG_AUDIO_CONTROLS uncommented
Audio meters working but freeze cam when you record and the meters stop working if you run a beep test.
Audio remote shot works in photo mode, in record mode it will freeze cam once starts to record.

With CONFIG_AUDIO_CONTROLS commented and defining meters and remote shot
Audio meters only work while recording no freeze cam
Audio remote shot works while recording no freeze cam, doesn't work in Photo mode.

Need to try FilterRec fix to see if it helps, pretty sure I found correct address just need to add the code for it to test.

Of course Wav recording does not record anything, it works, just records nothing.

At least meters sort of work and beep works good.

I have been using 600D as Ref and I am pretty sure my stubs are correct, threshold was differ to find but Im guessing it is good since meters are working, seems like something else freezes cam because even if I disable meters it still freezes when I record if I have CONFIG_AUDIO_CONTROLS uncommented.

Awesome! Never got round to doing this, too many things going on atm. I guess this is where you disable things one by one to find out what's causing the freezing.
Title: Where can I get the .FIR file for the Canon 700D / T5i?
Post by: Mikey P on January 07, 2014, 01:33:12 AM
Hey Magic Lantern friends!
I'm trying to get ML loaded up on my brothers t5i/700d and can't seem to find the ".fir" file for the initial install.
So far the t5i can only run a "Nightly Build" meaning it's not a stable release, but they're giving out the AUTOEXEC.bin and ML folder (for the t5i), but not the .fir file?

Anyone have to deal with this?
Title: Re: Where can I get the .FIR file for the Canon 700D / T5i?
Post by: mk11174 on January 07, 2014, 11:51:32 AM
Quote from: Mikey P on January 07, 2014, 01:33:12 AM
Hey Magic Lantern friends!
I'm trying to get ML loaded up on my brothers t5i/700d and can't seem to find the ".fir" file for the initial install.
So far the t5i can only run a "Nightly Build" meaning it's not a stable release, but they're giving out the AUTOEXEC.bin and ML folder (for the t5i), but not the .fir file?

Anyone have to deal with this?
UPDATED LINK, SORRY!
https://bitbucket.org/mk11174/t5i/downloads/700D_all%20you%20need%20MagicLatern.zip
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 07, 2014, 02:00:29 PM
Here is the ML version of 700D that allows for MLV_REC with MLV_SND and enables beep and meters but still meters only work while recording.

I guess since we have meters and level and filter adjustments in Canon menu we really are not missing out on those features in ML.

This is compiled from up to date ML repo as of Jan 7 2014.
https://bitbucket.org/mk11174/magic-lantern/downloads/ML_700D_ML_Audio_Jan_7_2014.zip
Title: Re: Canon 700D / T5i
Post by: asilnevs on January 07, 2014, 05:44:54 PM
This is great guys, thanks.
I just tried recording the sound and the bars are working very smooth.
I wanted to change the volume (1 to 5) but it seems that this is not working yet. Is that possible?
Title: Re: Canon 700D / T5i
Post by: asilnevs on January 07, 2014, 06:43:20 PM
Aha, now I see.
The volume is for changing Beeptone  :D
Title: Re: Where can I get the .FIR file for the Canon 700D / T5i?
Post by: TAB on January 07, 2014, 08:39:31 PM
Quote from: mk11174 on January 07, 2014, 11:51:32 AM
https://bitbucket.org/mk11174/magic-lantern/downloads/700D_all%20you%20need%20MagicLatern.zip

Awesome, thanks!

I've been trying to figure out the .fir for ages. I've finally registered to say thank you.

So I'm wondering, how long did it take to bring a stable release to the 600d?

I know there's no way to estimate a timeframe on upcoming versions, I'm just trying to gauge how long it's taken in the past.
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 07, 2014, 10:32:00 PM
Quote from: asilnevs on January 07, 2014, 06:43:20 PM
Aha, now I see.
The volume is for changing Beeptone  :D
Yeah, for beep tone 8] but if we need to change the mic volume at least we can just use Canons input changer in the Canon menu, and our speaker volume is also adjustable on cam, so we really are not missing out on those features at least.
Title: Re: Canon 700D / T5i
Post by: godashram on January 08, 2014, 02:14:23 AM
I'd love to test the audio meters, and they would be useful this week while at CES, but because I need stability for CES, I can't risk it :(

Very excited to have meters while recording though, it'll help for interviews :)
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 08, 2014, 10:26:23 AM
I added the changes to repo and they were accepted and merged so maybe will be in nightly soon.
Title: Re: Where can I get the .FIR file for the Canon 700D / T5i?
Post by: Mikey P on January 09, 2014, 12:52:52 AM
Quote from: mk11174 on January 07, 2014, 11:51:32 AM
UPDATED LINK, SORRY!
https://bitbucket.org/mk11174/t5i/downloads/700D_all%20you%20need%20MagicLatern.zip

THANKS!! I was pulling my hair out!
Title: Re: Canon 700D / T5i
Post by: godashram on January 09, 2014, 02:15:18 AM
and it appears to have popped up in the nightly....

9004: Add 700d stubs for audio meters and beep

9003: Add 700d beep and audio meters feature

9002: Add 700d define for CONFIG_BEEP

9001: Remove 700d define for audio threshold
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 09, 2014, 10:19:37 AM
The audio module for mlv_snd is not included in nightly so if you want sound, stay up to date with the latest mlv_rec and mlv_snd modules here.
http://www.magiclantern.fm/forum/index.php?topic=7122.msg59525#msg59525 (http://www.magiclantern.fm/forum/index.php?topic=7122.msg59525#msg59525)
Title: Re: Canon 700D / T5i
Post by: PiNgOa on January 11, 2014, 01:46:55 PM
Hello there, I am a French guy and I have just received my 700D and almost installed ML the minute after :D

I am now discovering this new world but I already have a little question about the focus stacking option. I think there is some kind of conflict between the ML autofocus and the Canon one because I can see that ML moves the focus of 4 steps as I have set it but then the camera tries to use the normal autofocus and takes the pic.

So the question is : how to disable the autofocus after the focus steps I have set ? I have tried all the AF options in the Canon firmware but still the same, the camera always tries to do the autofocus after the few steps of the stacking option...
Title: Re: Canon 700D / T5i-Issues
Post by: llburg on January 11, 2014, 10:55:00 PM
Just want to say thank you to all the people hard at work on the T5i port!
I'm having a few issues however. Aside from the bugginess (shutter speed setting sometimes doesn't stick, menus closing, etc.) I had this weird noise pattern show up when I was testing the RAW video @ 720p. (See attachment) Also, a few frames had weird color cast and several were black and white. I was wondering if anybody else had seen this: (http://i44.tinypic.com/2q401hx.jpg)
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 11, 2014, 11:36:25 PM
Anyone to test out full time audio meters here you go.
https://bitbucket.org/mk11174/t5i/downloads/ML_700D_ML_Audio_Jan_11_2014.zip (https://bitbucket.org/mk11174/t5i/downloads/ML_700D_ML_Audio_Jan_11_2014.zip)
Title: Re: Canon 700D / T5i-Issues
Post by: mk11174 on January 11, 2014, 11:38:28 PM
Quote from: llburg on January 11, 2014, 10:55:00 PM
Just want to say thank you to all the people hard at work on the T5i port!
I'm having a few issues however. Aside from the bugginess (shutter speed setting sometimes doesn't stick, menus closing, etc.) I had this weird noise pattern show up when I was testing the RAW video @ 720p. (See attachment) Also, a few frames had weird color cast and several were black and white. I was wondering if anybody else had seen this:
I know about the dot pattern, that is how the newer cameras are, you have to use pink dot remove to get rid of them, I forgot where the thread was, I guess look up pink dot, might be good.

I myself had not had any other bugs yet.
Title: Re: Canon 700D / T5i
Post by: BASSPRO on January 12, 2014, 07:15:34 PM
Oops, the Nightly Build is broken?
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 13, 2014, 02:16:47 AM
Quote from: BASSPRO on January 12, 2014, 07:15:34 PM
Oops, the Nightly Build is broken?
What is broken for you? I just downloaded it and works fine?
Title: Re: Canon 700D / T5i
Post by: BASSPRO on January 13, 2014, 03:27:39 PM
The modules menu appears to have disappeared.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 13, 2014, 03:43:18 PM
With latest build?
This problem was identified for 650D and some code has been disabled for now.
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 13, 2014, 04:44:08 PM
Quote from: BASSPRO on January 13, 2014, 03:27:39 PM
The modules menu appears to have disappeared.
Yeah, this is an issue with the 650D, but with plenty of testing I have not lost the menu at all. But if more people report the bug, I will commit to disable the beep, this will fix the issue for sure.

Try starting fresh though and delete ML folder and Autoexec.bin file from card and add new files from Nightly and check for sure, if it does not come back and stay back, I will remove the Beep Task, I guess we really don't need the beep anyway, not vital.

Just strange how I have not had any issues handling the version with the beep which is why I left it in there and only took it off the 650D.
Title: Re: Canon 700D / T5i
Post by: a1ex on January 13, 2014, 04:56:29 PM
Quote from: mk11174 on January 13, 2014, 04:44:08 PM
Just strange how I have not had any issues handling the version with the beep which is why I left it in there and only took it off the 650D.

The number of tasks is variable (both for Canon firmware and ML). I'd even advise to disable audio meters completely until it's fixed properly (this feature starts two tasks), otherwise you'll keep having this kind of issues that are hard to reproduce (works for some, but not for others).
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 13, 2014, 05:03:50 PM
Quote from: a1ex on January 13, 2014, 04:56:29 PM
The number of tasks is variable (both for Canon firmware and ML). I'd even advise to disable audio meters completely until it's fixed properly (this feature starts two tasks), otherwise you'll keep having this kind of issues that are hard to reproduce (works for some, but not for others).
I figured out how he probably got it to vanish, I never looked for module menu in photo only mode, I always use movie mode right away, I just tried photo and no more module menu, but still shows everytime if I go straight to movie mode from off, always gone if I go just to photo mode.

disabling beep from internals brings it back in both both just like 650D.

The camera runs solid with meters though, I even am using them full time with the patch I added for my build at least and it runs great even using mlv_rec with ettr and dual_iso all at same time and also mlv_snd, no issues at all and even booting cam with all modules on.

So I don't think turning off meters is needed, unless other models have issues once beep is off, then OK 8] But I am sure everyone likes the meters on.

UPDATE: Sent changes to get rid off the beep, so after other testers get the new nightly with the changes we can go from there on the meters.
Title: Re: Canon 700D / T5i
Post by: a1ex on January 13, 2014, 05:12:07 PM
Once some feature will require one more task, things will break. There's no error checking in ML when a task can't be created, so things will fail silently (you may not even notice it).

FYI: http://en.wikipedia.org/wiki/Factor_of_safety

and "works for me" is not a synonymous for "runs solid".
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 13, 2014, 05:21:49 PM
Quote from: a1ex on January 13, 2014, 05:12:07 PM
Once some feature will require one more task, things will break. There's no error checking in ML when a task can't be created, so things will fail silently (you may not even notice it).
and "works for me" is not a synonymous for "runs solid".
Well, I never did say it ran sold, I was only saying keep the meters because users like them and it is very aware that there are risks on all builds, I was just saying, maybe when other testers report in, then we will know for sure if it stable to run meters, we won't know unless others test it, correct?

I don't mind taking them off, I was just saying they run fine for me, so it is worth for others to test as well.

Or I can take them off in the nightly and maybe post a version in this forum for testing only?? Would that be better for you? I would like more feedback from other testers though.
Title: Re: Canon 700D / T5i
Post by: PiNgOa on January 13, 2014, 05:25:19 PM
No one to help me with my focus stacking problem out there ?  :(
Title: Re: Canon 700D / T5i
Post by: a1ex on January 13, 2014, 05:26:20 PM
I quoted from your post ;)

What I'm trying to tell you is that you should not just try to push features, but also have some common sense and leave some safety margins. A proper fix requires serious refactoring of a lot of ML code; once that is done, there will be no more problems with the number of tasks.
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 13, 2014, 05:28:05 PM
Quote from: PiNgOa on January 13, 2014, 05:25:19 PM
No one to help me with my focus stacking problem out there ?  :(
Maybe you have Continuous AF Enabled in Canon???

Let me know if that is the fix for your issue and I will add it to the help menu.
Title: Re: Canon 700D / T5i
Post by: a1ex on January 13, 2014, 05:31:11 PM
If continuous AF is the problem, the proper fix is to print this advice in the menu.
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 13, 2014, 05:39:40 PM
Quote from: a1ex on January 13, 2014, 05:26:20 PM
I quoted from your post ;)

What I'm trying to tell you is that you should not just try to push features, but also have some common sense and leave some safety margins. A proper fix requires serious refactoring of a lot of ML code; once that is done, there will be no more problems with the number of tasks.
Yeah, I said "works for me" but I never said it "runs solid" I would never assume ML runs solid because there are always new updates that can cause issues and do cause issues, just like all the bugs that happen everyday with ML, but unless it is tested than how will we know.

Don't want to sound harsh, but I do have plenty of common sense, I am just here to help people, don't want to cause any trouble, and when I post a build, I say for testing if anyone wants to try. I can't force anyone to test it, it is totally up to them.

And after these last few posts I am sure everyone will even be more aware that its still in test phase.

But you are way more experienced then I am so I will do as you ask and kill the meters, but I will also note: that I will share the meter version if anyone wants it, they can just message me so the build is not on the forum since you don't think it is safe and wont have to be responsable for it.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 13, 2014, 05:51:45 PM
@a1ex: Thought the task number thing was off the list after running those tests on 650D?

And if there is anything darker than nightly to be tested on a 650D: Count me in for the next few hours.

Ciao
Walter
Title: Re: Canon 700D / T5i
Post by: a1ex on January 13, 2014, 05:56:55 PM
After some chat with mk, he confirmed that some tasks did not start, so it's still the primary suspect.
Title: Re: Canon 700D / T5i
Post by: PiNgOa on January 14, 2014, 12:01:44 AM
Quote from: a1ex on January 13, 2014, 05:31:11 PM
If continuous AF is the problem, the proper fix is to print this advice in the menu.

It doesn't seem to be the continuous AF in Canon menu, I don't use it anyway even without ML running 'cause it just makes me sick to see my lens focusing all the time :D

No it just seems that the camera is makin the One Shot AF after the focus stacking steps and before taking the picture, so it just ruins the focus stacking obviously  ;D

There is no way to disable the Canon AF temporarily so that I could use the focus stacking option ?
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 14, 2014, 01:44:38 AM
Quote from: PiNgOa on January 14, 2014, 12:01:44 AM
It doesn't seem to be the continuous AF in Canon menu, I don't use it anyway even without ML running 'cause it just makes me sick to see my lens focusing all the time :D

No it just seems that the camera is makin the One Shot AF after the focus stacking steps and before taking the picture, so it just ruins the focus stacking obviously  ;D

There is no way to disable the Canon AF temporarily so that I could use the focus stacking option ?
Darn!! Sorry man, was hoping it would be a simple fix for you. Not sure about the fix at all  :(
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 14, 2014, 10:09:01 AM
Anyone here interested in the version with Audio Meters enabled you can find any latest versions here that I will keep up to date best I can with the main repo so it will also have all the latest stuff you see in the Nightly, but this version will have the meters. I took out the beep so we don't lose the Modules menu in Photo Mode.

https://bitbucket.org/mk11174/t5i/downloads (https://bitbucket.org/mk11174/t5i/downloads)

Please report back in this thread if the meter version is as stable as the nightly, maybe with enough OK's, maybe they will be allowed back in.

The 700D like the 650D both have TASK issues, so running the meters Alex says uses 2 TASKS, so this may eventually lead to crashes, BUT, so can the version without meters, so we won't know till it is tested properly.

I have them working all the time now and can even use Audio Remote Shoot just fine with them in both Photo and Movie mode.

For me it runs as good with them then without them, but as Alex said, we can't see what is going on in the code, so we won't know till more people try it out in everyday situations.

I am not experienced enough to finish the Audio Chip coding, but maybe when 1% gets the EOS-M going, maybe, just maybe I will have something to work with. Or maybe a real programmer will get it going that has this camera too.

At least we have the stubs for audio so we can get sound with MLV_REC in the nightly and of coarse meters addition here, and audio remote shot if that really is even used anymore, lol.
Title: Re: Canon 700D / T5i
Post by: JimCoyle on January 14, 2014, 07:57:40 PM
Hi Guys,

Any sign of a .fir version yet that will allow for ML to be disabled?? I love the features of ML but as selling my t5i soon I want to remove ML. 
Title: Re: Canon 700D / T5i
Post by: Felipe on January 15, 2014, 06:24:04 AM
New firmware version 1.1.3 is now available at Canon site. Good News or Bad News ?
http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_rebel_t5i_18_55mm_is_stm_lens_kit#DriversAndSoftware
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 15, 2014, 07:21:26 AM
Quote from: Felipe on January 15, 2014, 06:24:04 AMNew firmware version 1.1.3 is now available at Canon site. Good News or Bad News ?

Depends ...
http://www.magiclantern.fm/forum/index.php?topic=5951.msg93066#msg93066

Ciao
Walter
Title: Re: Canon 700D / T5i
Post by: a1ex on January 15, 2014, 08:31:43 AM
Quote from: PiNgOa on January 14, 2014, 12:01:44 AM
It doesn't seem to be the continuous AF in Canon menu, I don't use it anyway even without ML running 'cause it just makes me sick to see my lens focusing all the time :D

No it just seems that the camera is makin the One Shot AF after the focus stacking steps and before taking the picture, so it just ruins the focus stacking obviously  ;D

There is no way to disable the Canon AF temporarily so that I could use the focus stacking option ?

Are the focus tools (follow focus, rack focus, stack focus) working for anyone else?
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 15, 2014, 08:50:39 AM
Are the focus tools (follow focus, rack focus, stack focus) working for anyone else?
[/quote]The focus tools work fine as long as Continuous focus is off in photo mode and Movie Servo AF is off in Movie mode, but stack focus doesn't seem to be working right, it does not re focus in steps, it just does a normal Auto focus on first picture, then takes all the stack pictures and at the end of it it focuses to the end point set.
Title: Re: Canon 700D / T5i
Post by: a1ex on January 15, 2014, 08:59:45 AM
Got it, take a look at cfn.c, and at AF_BTN_STAR / AF_BTN_HALFSHUTTER constants. These are needed for ML to disable autofocus for photos.
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 15, 2014, 09:36:46 AM
Quote from: a1ex on January 15, 2014, 08:59:45 AM
Got it, take a look at cfn.c, and at AF_BTN_STAR / AF_BTN_HALFSHUTTER constants. These are needed for ML to disable autofocus for photos.
NICE! it was the cfn.c never uncommented, but it works now, thanks, I will make changes.
Title: Re: Canon 700D / T5i
Post by: PiNgOa on January 15, 2014, 10:24:54 AM
Thank you very much, that's a function I really needed  ;)

I will be happy to test it if you need to !
Title: Re: Canon 700D / T5i
Post by: PiNgOa on January 15, 2014, 12:26:57 PM
Can I edit a file in the last nightly manually or do I need a large technical knowledge ?
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 15, 2014, 01:22:26 PM
Quote from: PiNgOa on January 15, 2014, 12:26:57 PM
Can I edit a file in the last nightly manually or do I need a large technical knowledge ?
No, you will need to wait for next nightly once it is committed, working on that now though. 8]

Or until then, u can test it out with this one.
https://bitbucket.org/mk11174/t5i/downloads/700D_ML_Audio_cfn_Fix2_Jan_15_2014.zip
Title: Re: Canon 700D / T5i
Post by: crocodile on January 15, 2014, 02:18:26 PM
Hi

I want to use movie crop function on 700d using ML .
Can i downgrade firmware 1.1.3 to 1.1.1 ?
or I should wait the devlopers build ML for 1.1.3

Thank you very much.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 15, 2014, 02:21:48 PM
http://www.magiclantern.fm/forum/index.php?topic=5951.msg93066#msg93066
Title: Re: Canon 700D / T5i
Post by: PiNgOa on January 15, 2014, 02:41:20 PM
Quote from: mk11174 on January 15, 2014, 01:22:26 PM
No, you will need to wait for next nightly once it is committed, working on that now though. 8]

Or until then, u can test it out with this one.
https://bitbucket.org/mk11174/t5i/downloads/700D_ML_Audio_cfn_Fix_Jan_15_2014.zip

Thanks, I'll try this and come back to tell you how it works !
Title: Re: Canon 700D / T5i
Post by: JimCoyle on January 15, 2014, 06:46:25 PM
Quote from: JimCoyle on January 14, 2014, 07:57:40 PM
Hi Guys,

Any sign of a .fir version yet that will allow for ML to be disabled?? I love the features of ML but as selling my t5i soon I want to remove ML.

I have just installed firmware 1.1.3. does this mean that ML that I installed with 1.1.1 is now removed? I believe so.  I just want someone that is an ML expert to confirm please.
Title: Re: Canon 700D / T5i
Post by: christo on January 15, 2014, 08:52:25 PM
So how stable is the recent nightly build for this thing, or, how far away is it from being stable? I just bought a t5i, its on 1.1.1. Is it safe to update firmware and use ML, can i just use ML alone? have people experienced bricking or any crashes etc?
Title: Re: Canon 700D / T5i
Post by: PiNgOa on January 15, 2014, 09:12:51 PM
Quote from: mk11174 on January 15, 2014, 01:22:26 PM
No, you will need to wait for next nightly once it is committed, working on that now though. 8]

Or until then, u can test it out with this one.
https://bitbucket.org/mk11174/t5i/downloads/700D_ML_Audio_cfn_Fix_Jan_15_2014.zip

Good news, it works great ! Thank you very much, I will eventually take the macro shots I've always wanted to take :D
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 15, 2014, 09:42:18 PM
Quote from: PiNgOa on January 15, 2014, 09:12:51 PM
Good news, it works great ! Thank you very much, I will eventually take the macro shots I've always wanted to take :D
Did small tweak to ALO code, thanks to Alex. Just in case it don't get into nightly anytime soon, best to have this version.
https://bitbucket.org/mk11174/t5i/downloads/700D_ML_Audio_cfn_Fix2_Jan_15_2014.zip
Title: Re: Canon 700D / T5i
Post by: BASSPRO on January 17, 2014, 07:45:46 AM
Quote from: mk11174 on January 15, 2014, 09:42:18 PM
Did small tweak to ALO code, thanks to Alex. Just in case it don't get into nightly anytime soon, best to have this version.
https://bitbucket.org/mk11174/t5i/downloads/700D_ML_Audio_cfn_Fix2_Jan_15_2014.zip

Working fine on my T5i. Thanks for this. The audio metres are just what we need. At least they remind me when I have forgotten to switch-on the Rhode video microphone.

I use Lightform C and Lightform N picture styles for most of my projects and strangely the ZEBRA stripes don't work with these two styles. If I switch to Visiontech picture style or one of the camera's on-board styles (Neutral or Faithful) the ZEBRAS work fine. Fortunately I can use the HISTOGRAM when the ZEBRAS aren't visible. Totally weird or am I missing something?
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 17, 2014, 10:15:00 AM
Quote from: BASSPRO on January 17, 2014, 07:45:46 AM
Working fine on my T5i. Thanks for this. The audio metres are just what we need. At least they remind me when I have forgotten to switch-on the Rhode video microphone.

I use Lightform C and Lightform N picture styles for most of my projects and strangely the ZEBRA stripes don't work with these two styles. If I switch to Visiontech picture style or one of the camera's on-board styles (Neutral or Faithful) the ZEBRAS work fine. Fortunately I can use the HISTOGRAM when the ZEBRAS aren't visible. Totally weird or am I missing something?
Thanks for the update on the meters, but for the zebras, I dont know anything about how they work, sorry 8[
Title: Re: Canon 700D / T5i
Post by: a1ex on January 17, 2014, 10:17:03 AM
Some picture styles are not using the full 0-255 range, so you need to change the thresholds for zebras.
Title: Re: Canon 700D / T5i
Post by: BASSPRO on January 17, 2014, 11:25:08 AM
Quote from: a1ex on January 17, 2014, 10:17:03 AM
Some picture styles are not using the full 0-255 range, so you need to change the thresholds for zebras.


Thanks Alex, problem solved.
Title: Re: Canon 700D / T5i
Post by: AndreaB on January 20, 2014, 04:06:48 PM
Hello guys,
this is my situation: Canon 700D (firmware 1.1.1) and Lens 18-135 STM (firmware 1.1.5).
The "rack focus" does not work.
It seems that the left and right buttons on the "set" button does not rule the lens for set the strat focus point.
I have the nightly builds magiclantern-v2.3.NEXT.2014Jan20.700D111
Can anyone help me?

I'm sorry for the translation. I'm italian.
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 20, 2014, 04:12:17 PM
Quote from: AndreaB on January 20, 2014, 04:06:48 PM
Hello guys,
this is my situation: Canon 700D (firmware 1.1.1) and Lens 18-135 STM (firmware 1.1.5).
The "rack focus" does not work.
It seems that the left and right buttons on the "set" button does not rule the lens for set the strat focus point.
I have the nightly builds magiclantern-v2.3.NEXT.2014Jan20.700D111
Can anyone help me?

I'm sorry for the translation. I'm italian.
I don't have any issues with it, I use the dial by the shutter button to go left and right while holding set button, easier on my fingers too.
Title: Re: Canon 700D / T5i
Post by: AndreaB on January 21, 2014, 09:48:51 AM
Ok guys this is my experience.
I tried to mount a lens on the 700D 55/250 (no STM) and the rack focus worked perfectly.
It 'possible that the objectives STM (stepper motor technology ) the rack focus does not work?

Ciao
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 21, 2014, 12:10:23 PM
Quote from: AndreaB on January 21, 2014, 09:48:51 AM
Ok guys this is my experience.
I tried to mount a lens on the 700D 55/250 (no STM) and the rack focus worked perfectly.
It 'possible that the objectives STM (stepper motor technology ) the rack focus does not work?

Ciao
I am sure that is possible, maybe stm lens is the issue if it is not working right with the ML code, afterall, the one new thing about them is how they focus. We should put in help so other know it dont work on STM lenses.
Title: Re: Canon 700D / T5i
Post by: romanboy on January 28, 2014, 01:06:24 AM
Quote from: Walter Schulz on December 26, 2013, 12:41:56 AM
Top of page -> Downloads -> Browse Nightly Builds ->
700D.111
         ^^^ indicates required firmware version

Firmware version 1.1.3 is not available via Canon's support page yet. 1.1.1 is not downloadable and never will be (at least officially) because it's the first firmware version delivered with the cam and not a single "initial" firmware version has ever been made available for end users.
So you're pretty much lost until Canon will officially release 1.1.3 *and* after the developers coded ML for this firmware version.
And don't ask for a time frame because there will be none. Sorry!

Ciao
Walter

ok, the question is:
yesterday upgraded (:°) to 1.1.3 firmware... now can i downgrade to 1.1.1 somehow?
Title: Re: Canon 700D / T5i
Post by: godashram on January 28, 2014, 01:50:03 AM
don't think you can, but with 1.1.3 finally available, I'm pretty sure something may pop up soon (fingers crossed)
Title: Re: Canon 700D / T5i
Post by: RedHerring on January 28, 2014, 04:03:23 AM
I am not having any of the problems that 113 fixes and I can't read Korean, so this firmware release is less than useless to me. Future cams will probably ship with it though, so ML will need to be updated.
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 29, 2014, 12:45:02 PM
I notice more downloads of the Jan 25th update, but on my downloads page, https://bitbucket.org/mk11174/t5i/downloads (https://bitbucket.org/mk11174/t5i/downloads) make sure you download the latest dated version to be up to date with nightly.  :)
Title: Re: Canon 700D / T5i
Post by: Amicus on January 29, 2014, 04:05:04 PM
Just a quick question: I'm looking into get a T5i for a short that I'm making so I can use Magic Lantern. Should I stick to using raw_rec or has the mlv format with sound been successfully reimplemented into the 700D firmware?
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 29, 2014, 05:55:31 PM
Quote from: Amicus on January 29, 2014, 04:05:04 PM
Just a quick question: I'm looking into get a T5i for a short that I'm making so I can use Magic Lantern. Should I stick to using raw_rec or has the mlv format with sound been successfully reimplemented into the 700D firmware?
I use mlv with sound just fine with it at 1280x720@24fps
Title: Re: Canon 700D / T5i
Post by: romanboy on January 29, 2014, 11:03:55 PM
Quote from: RedHerring on January 28, 2014, 04:03:23 AM
I am not having any of the problems that 113 fixes and I can't read Korean, so this firmware release is less than useless to me. Future cams will probably ship with it though, so ML will need to be updated.

yeah...I was wrong and now i have to wait....
Title: Re: Canon 700D / T5i
Post by: Amicus on January 30, 2014, 12:04:38 AM
Quote from: mk11174 on January 29, 2014, 05:55:31 PM
I use mlv with sound just fine with it at 1280x720@24fps
Do you use it straight from the nightly downloads or add it in later? I'm asking because I remember an issue listed here earlier with the MLV format where the solution was to add it post-download. I think  ::) Thanks!
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 30, 2014, 01:14:53 AM
I dont use the nightly, I compile myself but its from the same source as nightly, so should be the same.
Title: Re: Canon 700D / T5i
Post by: Amicus on January 30, 2014, 03:21:53 AM
Quote from: mk11174 on January 30, 2014, 01:14:53 AM
I dont use the nightly, I compile myself but its from the same source as nightly, so should be the same.
I just downloaded the nightly for today to take a look at what's been going on lately. In the modules folder the is mlv_play, mlv_rec, and raw_rec, but no mlv_snd. Did it get merged with _rec or taken out completely, and in what way do you compile it? (just trying to learn a few things).
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 30, 2014, 04:00:35 AM
Quote from: Amicus on January 30, 2014, 03:21:53 AM
I just downloaded the nightly for today to take a look at what's been going on lately. In the modules folder the is mlv_play, mlv_rec, and raw_rec, but no mlv_snd. Did it get merged with _rec or taken out completely, and in what way do you compile it? (just trying to learn a few things).
You can use my compiled version or just the mlv_snd module from it, it should still work with nightly its only 2 days old.
https://bitbucket.org/mk11174/t5i/downloads/ML_700D_ML_Audio_Jan_27_2014.zip (https://bitbucket.org/mk11174/t5i/downloads/ML_700D_ML_Audio_Jan_27_2014.zip)

Compiling is much to much to explain, theres much you will need to learn to be able to compile.  :(
Title: Re: Canon 700D / T5i
Post by: Amicus on January 30, 2014, 04:44:41 AM
Quote from: mk11174 on January 30, 2014, 04:00:35 AM
You can use my compiled version or just the mlv_snd module from it, it should still work with nightly its only 2 days old.
https://bitbucket.org/mk11174/t5i/downloads/ML_700D_ML_Audio_Jan_27_2014.zip (https://bitbucket.org/mk11174/t5i/downloads/ML_700D_ML_Audio_Jan_27_2014.zip)

Compiling is much to much to explain, theres much you will need to learn to be able to compile.  :(
I'm quite aware of that haha. I've always wanted to get I to this kind if thing, should be fun to delve into at some point. Thanks for the download as well!
Title: Re: Canon 700D / T5i
Post by: mk11174 on January 30, 2014, 03:58:09 PM
Ok, after trial and error debugging with Glassescreditsroll, I came up with a good temp solution for fulltime meters that works exactly the same on the 650d and 700d https://bitbucket.org/mk11174/t5i/downloads/ML_700D_Meters_Jan_30_2014.zip (https://bitbucket.org/mk11174/t5i/downloads/ML_700D_Meters_Jan_30_2014.zip)

It enables Photomode remote shoot without going into Audio Menu and meters work fulltime in Movie Mode.

If you notice the meters are not the same levels when you first start cam compared to how they are when you record a movie, don't worry, it means you are using Manual Gain Control in Canon Audio Menu. This temp solution just gets meters going and it does it in Auto Gain Control mode, so this is why your levels will look differ at first, but good news is, you can either set Canon Gain control to Auto and levels will be same no matter what, whether you record or don't record, or restart cam.

Or if you are one to use Manual Control of Canon Gain, than just simply record a 1 second clip and when you stop that recording, that will kick the levels into Manual mode to match Canons setting, or simply just goto the Canon levels menu 1 time and that will also do it.

But once you restart camera, you will have to go back to Canons Audio menu or just record a 1sec clip again.

But if you Have Canon Gain Control set to Auto, then you wont have to do any steps at all, they will just work fine.

So nothing is wrong with the levels if they are differ at first start compared to when you record, it is just ML does not know how to control the gain yet, so I have it simply turn meters on in Auto Gain mode. I can set it to Manual, but it would be useless, since the Audio Chip is not programmed yet, so the changes you make in Canon Menu wont reflect the ML levels, I can only hardcode a value in ML code and it will not be same as Canon level, so it is just pointless till the Audio chip is fully coded and configured to work with ML.

For now, I just basically turned the meters on and they reset when they need to so they will work correctly.

This new way does not mess with wind filter so there wont be any issues with the filters being buggy.
Title: Re: Canon 700D / T5i
Post by: BASSPRO on January 31, 2014, 12:44:24 PM
Quote from: mk11174 on January 30, 2014, 03:58:09 PM
Ok, after trial and error debugging with Glassescreditsroll, I came up with a good temp solution for fulltime meters that works exactly the same on the 650d and 700d https://bitbucket.org/mk11174/t5i/downloads/ML_700D_Meters_Jan_30_2014.zip (https://bitbucket.org/mk11174/t5i/downloads/ML_700D_Meters_Jan_30_2014.zip)

It enables Photomode remote shoot without going into Audio Menu and meters work fulltime in Movie Mode.

If you notice the meters are not the same levels when you first start cam compared to how they are when you record a movie, don't worry, it means you are using Manual Gain Control in Canon Audio Menu. This temp solution just gets meters going and it does it in Auto Gain Control mode, so this is why your levels will look differ at first, but good news is, you can either set Canon Gain control to Auto and levels will be same no matter what, whether you record or don't record, or restart cam.

Or if you are one to use Manual Control of Canon Gain, than just simply record a 1 second clip and when you stop that recording, that will kick the levels into Manual mode to match Canons setting, or simply just goto the Canon levels menu 1 time and that will also do it.

But once you restart camera, you will have to go back to Canons Audio menu or just record a 1sec clip again.

But if you Have Canon Gain Control set to Auto, then you wont have to do any steps at all, they will just work fine.

So nothing is wrong with the levels if they are differ at first start compared to when you record, it is just ML does not know how to control the gain yet, so I have it simply turn meters on in Auto Gain mode. I can set it to Manual, but it would be useless, since the Audio Chip is not programmed yet, so the changes you make in Canon Menu wont reflect the ML levels, I can only hardcode a value in ML code and it will not be same as Canon level, so it is just pointless till the Audio chip is fully coded and configured to work with ML.

For now, I just basically turned the meters on and they reset when they need to so they will work correctly.

This new way does not mess with wind filter so there wont be any issues with the filters being buggy.

This is great. I have tried it out and it works for me. I'm so happy to be able to see audio metres whilst I'm recording. I don't have to worry if my mic is switched on. Well done, and thank you for your hard work, it's definitely made my day!

Have used this release every day for past 5 days without a hitch. Great job, love it!
Title: Re: Canon 700D / T5i
Post by: smyky on February 05, 2014, 07:53:25 PM
Whenever i record a RAW video these image errors to occur?  http://www.mediafire.com/view/myfiles/#
Title: Re: Canon 700D / T5i
Post by: godashram on February 05, 2014, 08:15:41 PM
Quote from: smyky on February 05, 2014, 07:53:25 PM
Whenever i record a RAW video these image errors to occur?  http://www.mediafire.com/view/myfiles/#
your link is not complete/not working
Title: Re: Canon 700D / T5i
Post by: smyky on February 05, 2014, 08:53:55 PM
sorry http://www.mediafire.com/view/aj0qri5x56t3jt3/raw.JPG
Title: Re: Canon 700D / T5i
Post by: godashram on February 05, 2014, 10:52:34 PM
there is a pink dot remover app somewhere on these forums which I think is made for this exact reason....

update: http://www.magiclantern.fm/forum/index.php?topic=6658.0
Title: Re: Canon 700D / T5i
Post by: [email protected] on February 07, 2014, 02:31:39 AM
Having a problem with MLV_SND, I see load: MLV_SND.MO > Linking> then several errors
mlv_rec_get_free_slot
mlv_rec_queue_block
mlv_rec_release_slot
mlv_rec_get_slot_info
mlv_rec_set_rel_timestamp

Then [E] failed to link modules

Am I doing something wrong or can I do something differently so that the module will load?

[UPDATE]

After testing some more It appears the MLV_SND module will load if MLV_REC is also selected. MLV_SND appears to be SMTPE, I had thought it was the sound meters. What's the deal? How do I get sound meters?
Title: Re: Canon 700D / T5i
Post by: dmilligan on February 07, 2014, 03:46:47 AM
Quote from: [email protected] on February 07, 2014, 02:31:39 AM
How do I get sound meters?

Reverse engineer the audio hardware in the 700D and implement it or wait for someone else to

http://builds.magiclantern.fm/#/features
Title: Re: Canon 700D / T5i
Post by: BASSPRO on February 07, 2014, 05:32:05 PM
Quote from: smyky on February 05, 2014, 08:53:55 PM
sorry http://www.mediafire.com/view/aj0qri5x56t3jt3/raw.JPG

Use the app Pink Dot Remover.
Title: Re: Canon 700D / T5i
Post by: BASSPRO on February 07, 2014, 05:34:30 PM
Quote from: BASSPRO on February 07, 2014, 05:32:05 PM
Use the app Pink Dot Remover.

mk11174 posted this build https://bitbucket.org/mk11174/t5i/downloads/ML_700D_Meters_Jan_30_2014.zip Works for me.
Title: Canon 700D / T5i Audio Meters
Post by: [email protected] on February 07, 2014, 06:45:11 PM
Thanks BASSPRO,

I tried the ML_700D_Meters_Jan_30_2014 files but no luck getting audio meters to appear. Which modules are you loading? Did you make any changes in the Canon Audio settings, is your audio recording in AUTO, MANUAL, or DISABLED?
Title: Re: Canon 700D / T5i
Post by: [email protected] on February 07, 2014, 07:05:32 PM
 :D Got the audio meters working on my T5i.

Found that I had to load;
MLV_PLAY
MLV_REC
MLV_SND

Thanks BASSPRO
Title: Re: Canon 700D / T5i
Post by: Ramon on February 09, 2014, 02:08:12 PM
I'm sorry but I'm new to Magic Lantern stuff, but what I see is much awesomeness :D
I wanna know if I should use this or not.. I have a Canon 700D, but I don't want to mess it up. :( Because I get warning after warning message when I download the firmware

What can I expect from the RAW video options? For how long would I be able to record video, and what fps etc?

What are the chances that it would destroy my camera?
Would it be better to wait for a stable version?

I know.. lots of questions, but I don't know who else to ask ;(
Thanks
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on February 09, 2014, 06:29:52 PM
Quote from: Ramon on February 09, 2014, 02:08:12 PMWould it be better to wait for a stable version?
Yes
Title: Re: Canon 700D / T5i
Post by: BASSPRO on February 09, 2014, 07:21:45 PM
Quote from: Walter Schulz on February 09, 2014, 06:29:52 PM
Yes

I loaded Magic Lantern on my T5i from the first day it arrived. Worked like a dream from the word go. Just follow the installation instructions to the letter and you'll be A ok! I check the regular updates, read all the changes, bugs etc., both Nightly and Alpha builds, and you'll soon find out what's good and bad.

There are a great bunch of guys working on this project, and personally I am extremely happy with the results they have and are producing. Being able to reduce ISOs to 70, 80 and 160 is simply marvellous. Not to mention Cropmarks, Focus Peaking (fantastic for manual lenses) plus a million other features and enhancements. You'll love ML, I do.  I repeat, follow the instructions and you won't have a problem, period.

If you want cutting edge progess on ML check out the posts from mk11174, he's working hard on getting  AUDIO meters to work. I'm running his alpha build and love it.

Here are a few steps to help you along the way.

Firstly make sure you have the correct firmware on your T5i/700D. Check out this site you'll find a link somewhere.
Secondly, download the MacBoot utility from internet, then;

1. Disk Utility: Erase everything on SD card.
2. MacBoot - Use third option - "DSLR Bootable"
3. Download ML from this site...the Nightly builds or the stable version (or if you're like me the Alpha builds)
3. Unpack ML to sub-directory...let's call it ML, (anywhere you like...mine's on my desktop.)
3. Copy ML from directory  'Magic Lantern" - 700D.xxx.xxx (or whatever version) - ML to root of SD Card. Make sure auto.exe file is in the root else won't boot.
4. Make sure MacBoot remains open when copying files.
5. Bang the card back into your T5i and you should be good to go.

The ROOT of your SD card should look something like mine which looks like this: (Check out the wonderful crop-marks from some of fantastic work from the brilliant guys using ML in the "Cropmarks" directory)
https://www.dropbox.com/sh/7bcnhzwhxhlvg2y/WylQyLzxCU

Then when ML is running like you want it too, you'll want to start playing with all the picture styles you can find, which in the long run will drive you crazy. Her's a small package of picture styles to get you started.
https://www.dropbox.com/s/lqxpyro0jfjvoig/158%20VW%20Collection%20CPS.zip (I'm sure there are enough to make you tear your hair out...Stick with Cinestyle, Prolost, VisionColor or VisionTech and CineLook and you'll be fine.

Then you will ask, what's next? It has to be RAW. A lot of work has gone into ML RAW but the workflow, for me, is far too tedious and time consuming. For short projects RAW is great but for day to day work, a fast turnaround is a prerequisite, so  ML basic does the job perfectly for me.

What am I waiting for? The new H265 codec, which should give results as good as RAW, is just around the corner, so I'm hanging in there!

Enjoy.

Title: Re: Canon 700D / T5i
Post by: kimmy24 on February 11, 2014, 02:58:11 PM
Also waiting for ML 700D fw1.1.3
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 11, 2014, 03:49:18 PM
Quote from: Ramon on February 09, 2014, 02:08:12 PM

Would it be better to wait for a stable version?

Honestly it is working great for me so, I don't see any problem getting it, It just can't control audio right now, but you already have that in Canon menu now, so you really don't need the control in ML. I use MLV_REC over Raw_Rec and it works great and with sound, Raw_Rec works fine, but I go with MLV.
Title: Re: Canon 700D / T5i
Post by: BASSPRO on February 11, 2014, 06:14:57 PM
Quote from: mk11174 on February 11, 2014, 03:49:18 PM
Honestly it is working great for me so, I don't see any problem getting it, It just can't control audio right now, but you already have that in Canon menu now, so you really don't need the control in ML. I use MLV_REC over Raw_Rec and it works great and with sound, Raw_Rec works fine, but I go with MLV.

Works for me, and I love it.
Title: Re: Canon 700D / T5i
Post by: kgmusic on February 11, 2014, 08:10:20 PM
BASSPRO, I was following your instructions and I thought you meant that I was supposed to upgrade to the latest firmware before trying to run the latest Nightly build.  So I did that but the latest firmware which recently came out is 1.1.3.  Now I can't run ML.  I try to run the firmware update but I think it's not working because the firmware update boot file is made to work with 1.1.1.

Do you know any way around this?  It seems like it's not possible to roll back the firmware, is it?

I now think that what you meant was upgrading to the firmware provided by the ML site...  bummer...  Does anybody have any ideas about how to roll back the firmware so that I can run ML now that I have 1.1.3?

Ken
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on February 11, 2014, 08:31:44 PM
Quote from: kgmusic on February 11, 2014, 08:10:20 PMDoes anybody have any ideas about how to roll back the firmware so that I can run ML now that I have 1.1.3?

You simply can't. You have to wait for ML to run with 1.1.3.
http://www.magiclantern.fm/forum/index.php?topic=5951.msg93071#msg93071
Title: Re: Canon 700D / T5i
Post by: Unimpressive on February 15, 2014, 04:07:09 PM
Just another voice chiming in that I'm on 1.1.3.

You guys are ridiculous, I'm blown away by your skills.
Keep doing what you do, and I'll be sitting here with my thumb up my butt reading along in awe.
Title: Re: Canon 700D / T5i
Post by: rackard on February 18, 2014, 12:17:34 PM
Hi guys.

Magic lantern seem revolutionary, but i have a 700 D with 1.1.3. Hope it'll be work with that firmware soon. See you and thank you for that work.
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 18, 2014, 07:32:32 PM
Ok guys, I am going to try to get your 1.1.3 FW started, but I need a volunteer???

quote from Alex the great!

"Then, let's find a volunteer running on 1.1.3 who can run the dumper."

http://a1ex.magiclantern.fm/bleeding-edge/blind-dumper/dumper-700D.fir

usage: run it (upgrade fw), then go to playback mode. Make sure you have a picture there (if it's "no image" it wont work). Then check the card.

Upload the Bin file somewhere and send me link to get it started.

Title: Re: Canon 700D / T5i
Post by: mian on February 18, 2014, 09:41:45 PM
Quote from: mk11174 on February 18, 2014, 07:32:32 PM
Ok guys, I am going to try to get your 1.1.3 FW started, but I need a volunteer???

Below is the link to my 1.1.3 dump.

edit: removed link; thanks for the dump.
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 19, 2014, 04:31:01 PM
Quote from: mian on February 18, 2014, 09:41:45 PM
Below is the link to my 1.1.3 dump.

edit: removed link; thanks for the dump.
Just wanted to say thanks again for the dump, the stubs are coming along fine, doing them as I get time, hopefully wont be to long now  :)
Title: Re: Canon 700D / T5i
Post by: Unimpressive on February 19, 2014, 04:37:17 PM
Quote from: mk11174 on February 18, 2014, 07:32:32 PM
Ok guys, I am going to try to get your 1.1.3 FW started

Thank You!  :D
Title: Re: Canon 700D / T5i
Post by: topspin391 on February 20, 2014, 09:37:36 AM
Hello. If anyone has a firmware magic lantern 1.1.3 on Canon 700D, I can test it. It is desirable to send the mail [email protected]
Title: Re: Canon 700D / T5i
Post by: kimmy24 on February 20, 2014, 06:51:14 PM
Finally, something to wait for. I foolishly updated to 1.1.3. Hoping for the best.
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 20, 2014, 07:34:25 PM
Quote from: kimmy24 on February 20, 2014, 06:51:14 PM
Finally, something to wait for. I foolishly updated to 1.1.3. Hoping for the best.
I ported all the stubs for it, but that are being checked first to make sure there correct. I don't exactly know who creates the bootloader FIR file though, I can compile and get the autoexec.bin when all is tested and ready for compiling, but will be useless with out the bootloader, so I hope I don't have to do that part because I am not sure how this is created. Hopefully the stubs are correct so at least you guys with the newer FW will be able to make use of ML. I still have the 1.1.1 FW so I am using ML already but don't want to upgrade to 1.1.3 till ML is able to load on it because theres no FW I can use to go back to 1.1.1. So good thing there was a volunteer to send his dump out to get things going. Best of luck, I will be glad to help out in any way to keep this 1.1.3 port moving forward.
Title: Re: Canon 700D / T5i
Post by: kimmy24 on February 21, 2014, 04:59:02 AM
I wish I could help but i don't have any programming experience about embedded software/firmware. I would have been a lot easier if downgrading to 1.1.1 was possible
Title: Re: Canon 700D / T5i
Post by: igortupini on February 21, 2014, 10:40:33 PM
I've updated for the 1.1.3 too. I would that I could make a downgrade. :(
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 22, 2014, 12:55:12 AM
Quote from: igortupini on February 21, 2014, 10:40:33 PM
I've updated for the 1.1.3 too. I would that I could make a downgrade. :(
No, thers no 1.1.1 firmware so you can't downgrade, the port of your 1.1.3 is started, just not sure how long the next step takes, alls I could do was the next step after we got the 1.1.3 dump from a user, I attempted the 2nd step but not sure if it was successful until I hear back from the main developer here, then maybe it can move on.
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on February 22, 2014, 03:02:42 AM
Hey,

I am just wondering if upgrading to the new 1.1.3. firmware will disable boot flag !
I mean installing ML with firmware 1.1.1 and then upgrading it to 1.1.3. Will it be a clean uninstall of ML ?
I just want to make sure that it is possible to disable it before enabling it  :)

PS: Thanks to everybody who is working on this !

Thanks,
TML
Title: Re: Canon 700D / T5i
Post by: FilipeNico on February 22, 2014, 09:06:16 AM
Quote from: ThankMeLater on February 22, 2014, 03:02:42 AM
Hey,

I am just wondering if upgrading to the new 1.1.3. firmware will disable boot flag !
I mean installing ML with firmware 1.1.1 and then upgrading it to 1.1.3. Will it be a clean uninstall of ML ?
I just want to make sure that it is possible to disable it before enabling it  :)

PS: Thanks to everybody who is working on this !

Thanks,
TML

It will replace the bootflag for the official 1.1.3 one

No need to upgrade your firmware though (are you having problems with the one you have? is the 1.1.3 solve any of the problems??)
Title: Re: Canon 700D / T5i
Post by: a1ex on February 22, 2014, 09:08:33 AM
Quote from: FilipeNico on February 22, 2014, 09:06:16 AM
It will replace the bootflag for the official 1.1.3 one

So far, Canon firmware updates did not touch the bootflag. Did you try it and found a different behavior? how exactly did you reach this conclusion?
Title: 180 degree Shutter Question
Post by: ThankMeLater on February 22, 2014, 11:09:16 PM
Hey guys,

I got 25fps pal video mode. Then i go to Magic lantern Menu. I adjust the shutter to 1/50 and get 162 degree shutter.

-> I adjust the shutter to 1/45 and get 179 degree shutter.

How is this possible ? i thought 2 * fps is the 180 degree shutter.

Pictures :

(http://img5.fotos-hochladen.net/thumbnail/cam00228e6aodp1vmi_thumb.jpg) (http://www.fotos-hochladen.net/view/cam00228e6aodp1vmi.jpg) (http://img5.fotos-hochladen.net/thumbnail/cam00229ui0fd3w6t2_thumb.jpg) (http://www.fotos-hochladen.net/view/cam00229ui0fd3w6t2.jpg)

I just dont know what to choose now. 1/50 because people say this should be the 180 degree shuter, or 1/45 because ML tells me its 180 degree.

Thanks in advance and best wishes,
thankmelater
Title: Re: Canon 700D / T5i
Post by: FilipeNico on February 22, 2014, 11:31:28 PM
Someone told me that if i wanted to erase my Magiclantern install the best way for now (till we have a decent unninstaller) would be to upgrade to 1.1.3 fw version
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on February 23, 2014, 12:36:09 AM
Help me please ! Is this a 700D ML bug or am i just too dumb to understand it ?
I got 25fps pal video mode. Then i go to Magic lantern Menu. I adjust the shutter to 1/50 and get 162 degree shutter.

-> I adjust the shutter to 1/45 and get 179 degree shutter.

How is this possible ? i thought 2 * fps is the 180 degree shutter.

Pictures :

(http://img5.fotos-hochladen.net/thumbnail/cam00228e6aodp1vmi_thumb.jpg) (http://www.fotos-hochladen.net/view/cam00228e6aodp1vmi.jpg) (http://img5.fotos-hochladen.net/thumbnail/cam00229ui0fd3w6t2_thumb.jpg) (http://www.fotos-hochladen.net/view/cam00229ui0fd3w6t2.jpg)

I just dont know what to choose now. 1/50 because people say this should be the 180 degree shuter, or 1/45 because ML tells me its 180 degree.

thanks in advance and best wishes,
thankmelater
Title: Re: 180 degree Shutter Question
Post by: ItsMeLenny on February 23, 2014, 05:28:41 AM
Are you using FPS override?
Title: Re: 180 degree Shutter Question
Post by: ThankMeLater on February 23, 2014, 10:20:08 AM
Hey,

thanks for your reply.
No im not using fps-override. Im right now using the ML Defaults. Havent changed anything.

Should i use it ?
Title: Re: 180 degree Shutter Question
Post by: sarotaz on February 23, 2014, 11:04:22 AM
It's strange. The correct shutter angle with 1/25 frame interval (25 fps) and 1/50 exposure is 180° according this:

Shutter Angle = (exposure Time/frame interval) * 360
Title: Re: Canon 700D / T5i
Post by: BASSPRO on February 23, 2014, 11:20:25 AM
Quote from: ThankMeLater on February 23, 2014, 12:36:09 AM
Help me please ! Is this a 700D ML bug or am i just too dumb to understand it ?
I got 25fps pal video mode. Then i go to Magic lantern Menu. I adjust the shutter to 1/50 and get 162 degree shutter.

-> I adjust the shutter to 1/45 and get 179 degree shutter.

How is this possible ? i thought 2 * fps is the 180 degree shutter.

Pictures :

(http://img5.fotos-hochladen.net/thumbnail/cam00228e6aodp1vmi_thumb.jpg) (http://www.fotos-hochladen.net/view/cam00228e6aodp1vmi.jpg) (http://img5.fotos-hochladen.net/thumbnail/cam00229ui0fd3w6t2_thumb.jpg) (http://www.fotos-hochladen.net/view/cam00229ui0fd3w6t2.jpg)

I just dont know what to choose now. 1/50 because people say this should be the 180 degree shuter, or 1/45 because ML tells me its 180 degree.

thanks in advance and best wishes,
thankmelater

Title: Re: 180 degree Shutter Question
Post by: ThankMeLater on February 23, 2014, 11:31:38 AM
thats what i thought.
now im wondering if the shutter angle is not displayed correctly or the shutter speed is displayed wrong.

in my position, would you still choose the 1/50 exposure ( even though it shows a wrong angle )
or choose the 1/45 ( as it shows almost 180 )

In first place id like to find a solution of course but i have to film something today and have to decide right now.

Title: Re: 180 degree Shutter Question
Post by: a1ex on February 23, 2014, 11:35:32 AM
What camera?

On 5D3 it prints 1/50, 180.
Title: Re: 180 degree Shutter Question
Post by: ThankMeLater on February 23, 2014, 11:39:38 AM
Hey Alex,

its a T5i / 700D
Title: Re: 180 degree Shutter Question
Post by: a1ex on February 23, 2014, 11:47:18 AM
1) does it recognize Canon FPS?

If you select 24 it should print 23.976, if you select 25 it should print 25.000, 30 should be 29.970, 60 should be 59.940 and 50 should be 50.000. Check all of them.

2) does it recognize Canon shutter speed?

In PAL 1/50 it should be 1/50.00. In PAL 1/30 it should be 1/33.333. Check the exact values Movie -> Image Finetuning -> Shutter fine-tuning.

This being a new port, I doubt anybody checked these things (and I don't remember anyone else reporting them).
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on February 24, 2014, 02:09:24 AM
Hey Alex,
thanks for your help and sorry for writing back that late.

QuoteCheck the exact values Movie -> Image Finetuning -> Shutter fine-tuning.

Here a picture of what I see, opening this window :

(http://img5.fotos-hochladen.net/thumbnail/cam00236ukw54ma2vq_thumb.jpg) (http://www.fotos-hochladen.net/view/cam00236ukw54ma2vq.jpg)

If this is not where the canon fps and the canon shutter are suppose to be printed, i dont know where else to check this ?
I checked every single menu point and did not find anything.


Title: Re: Canon 700D / T5i
Post by: Utzelbrutz on February 25, 2014, 09:16:25 AM
I would like to change the code to 700D.113 by myself but there are so many files and versions.
Which data/files do i exactly need?
The upgrade from 111 to 113 was only a bugfix. Nothing else has changed.
I can't believe that it's such a big deal to upgrade ML aswell.
Maybe one of the devs? Please?
Title: Re: Canon 700D / T5i
Post by: dmilligan on February 25, 2014, 01:55:57 PM
Quote from: Utzelbrutz on February 25, 2014, 09:16:25 AM
I would like to change the code to 700D.113 by myself but there are so many files and versions.
Which data/files do i exactly need?
It's more complicated than you think. Do you have the compiler setup already?

Quote from: Utzelbrutz on February 25, 2014, 09:16:25 AM
The upgrade from 111 to 113 was only a bugfix. Nothing else has changed.
I can't believe that it's such a big deal to upgrade ML aswell.
ML works by calling Canon code, which is code we know nothing about. Basically we find a bunch of memory addresses that appear to be functions and appear to work a certain way based on reverse engineering analysis. These addresses are then hardcoded into ML for each and every camera/fw version and given names based on what we think they do. Even something as small as Canon changing one character in one string literal in the fw could cause all of these function addresses to be shifted around and not where we expect (which would mean ML would completely fail to work correctly and probably brick the camera).

mk11174 has already more or less completed the process of finding the new function stubs, so it sounds like it won't be long, so just sit tight and wait for this to be finished
Quote from: mk11174 on February 20, 2014, 07:34:25 PM
I ported all the stubs for it, but that are being checked first to make sure there correct. I don't exactly know who creates the bootloader FIR file though, I can compile and get the autoexec.bin when all is tested and ready for compiling, but will be useless with out the bootloader, so I hope I don't have to do that part because I am not sure how this is created. Hopefully the stubs are correct so at least you guys with the newer FW will be able to make use of ML. I still have the 1.1.1 FW so I am using ML already but don't want to upgrade to 1.1.3 till ML is able to load on it because theres no FW I can use to go back to 1.1.1. So good thing there was a volunteer to send his dump out to get things going. Best of luck, I will be glad to help out in any way to keep this 1.1.3 port moving forward.
Title: Re: Canon 700D / T5i
Post by: Utzelbrutz on February 25, 2014, 02:51:17 PM
Oh, ok. Thanks for the info. Didn't know that it is so hard.
I think i'll wait for the pros to fix it  8)
Again. Thank you for your amazing work. Really nice "project".
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on February 25, 2014, 02:58:44 PM
Can nobody help me with my shutter problem ?   :(
I just downloaded older alpha builds but still the same problem.
Using 50 fps magic lantern tells me, the 180 degree angle is at 1/88 shutter speed  >:( whereas 1/96 is 162 degree .

How is it possible that I´m the only one having this problem. I did not change anything in my settings. I even reseted the canon settings to default.


Is it possible that my camera is broken ? its pretty new, though.

I uploaded a video of my problem on youtube [ USING 1080 25 FPS ] :
http://www.youtube.com/watch?v=b12vf9Cyf0o&feature=youtu.be
Title: Re: Canon 700D / T5i
Post by: TAB on February 25, 2014, 05:38:44 PM
Quote from: mk11174 on January 30, 2014, 03:58:09 PM
Ok, after trial and error debugging with Glassescreditsroll, I came up with a good temp solution for fulltime meters that works exactly the same on the 650d and 700d https://bitbucket.org/mk11174/t5i/downloads/ML_700D_Meters_Jan_30_2014.zip (https://bitbucket.org/mk11174/t5i/downloads/ML_700D_Meters_Jan_30_2014.zip)


The primary feature I need is the audio meters. Should I use this version mk11174 linked above, or are audio meters available yet on the general nightly build here: http://builds.magiclantern.fm/#/

It would be really great if there was a file attached to the nightly builds that listed which features are fully operational, and which are still in progress (or is there, and I just don't know where to look?).

Thanks guys, you are wizards for making this possible.
Title: Re: Canon 700D / T5i
Post by: dmilligan on February 25, 2014, 05:40:52 PM
Perhaps try clicking on the word Features (http://builds.magiclantern.fm/#/features) in that link you posted
Title: Re: Canon 700D / T5i
Post by: TAB on February 25, 2014, 05:52:42 PM
Quote from: dmilligan on February 25, 2014, 05:40:52 PM
Perhaps try clicking on the word Features (http://builds.magiclantern.fm/#/features) in that link you posted

Derp, thank you.
Title: Re: Canon 700D / T5i
Post by: krisdeak on February 26, 2014, 12:30:55 AM
Thanks guys for the amazing developments.

I'm currently torn between buying a 700D or a 600D and I need to ask you guys a few quick questions:
The arguments for the 600D would be the fantastic Tragic Lantern bitrate control features (ALL-I etc) and the built in 3x crop mode for video.

Is it possible to have the same advanced bitrate control features on the 700D as well? If not, what's available and what's likely to be ported at some point?
Is the 'crop mode hack' similar to the 600D & delivering the same moire-free quality in a stable manner, in h.264 recording too?

Your advice is hugely appreciated.
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 26, 2014, 01:30:27 PM
Quote from: ThankMeLater on February 25, 2014, 02:58:44 PM
Can nobody help me with my shutter problem ?   :(
I just downloaded older alpha builds but still the same problem.
Using 50 fps magic lantern tells me, the 180 degree angle is at 1/88 shutter speed  >:( whereas 1/96 is 162 degree .

How is it possible that I´m the only one having this problem. I did not change anything in my settings. I even reseted the canon settings to default.


Is it possible that my camera is broken ? its pretty new, though.

I uploaded a video of my problem on youtube [ USING 1080 25 FPS ] :
http://www.youtube.com/watch?v=b12vf9Cyf0o&feature=youtu.be
Not sure what is up, something with fps is off too at least just with ML.
If I set to 60P in Canon, FPS Override shows for Exact FPS
60p Canon = Desired from 54 and Actual FPS 54.993
24p Canon = Desired from 22 and Actual FPS 21.993
30p Canon = Desired from 27 and Actual FPS 27.496

As for shutter speeds, certain ones are correct. In Photo Mode no Live view, just to give an idea, probably not needed for me to give all this data, but just to be detailed.
30" Canon = 32" ML
25" Canon = 25" ML
20" Canon = 21" ML
15" Canon = 16" ML
13" Canon = 13" ML
10" Canon = 11" ML
8" Canon = 8" ML
6" Canon = 6" ML
5" Canon = 5" ML
4" Canon = 4" ML
3"2 Canon = 3.2" ML
2"5 Canon = 2.7" ML
2" Canon = 2" ML
1"6 Canon = 1.6" ML
1"3 Canon = 1.3" ML
1" Canon = 1" ML
0"8 Canon = 0.8" ML
0"6 Canon = 0.7" ML
0"5 Canon = 0.5" ML
0"4 Canon = 0.4" ML
0"3 Canon = 1/3 ML
1/4 Canon = 1/4 ML
1/5 Canon = 1/5 ML
1/6 Canon = 1/6 ML
1/8 Canon = 1/8 ML
1/10 Canon = 1/10 ML
1/13 Canon = 1/12 ML
1/15 Canon = 1/16 ML
1/20 Canon = 1/20 ML
1/25 Canon = 1/24 ML
1/30 Canon = 1/31 ML
1/40 Canon = 1/41 ML
1/50 Canon = 1/48 ML
1/60 Canon = 1/63 ML
1/80 Canon = 1/81 ML
1/100 Canon = 1/96 ML
1/125 Canon = 1/130 ML
1/160 Canon = 1/160 ML
1/200 Canon = 1/190 ML
1/250 Canon = 1/250 ML
1/320 Canon = 1/320 ML
1/400 Canon = 1/390 ML
1/500 Canon = 1/500 ML
1/640 Canon = 1/650 ML
1/800 Canon = 1/770 ML
1/1000 Canon = 1/1000 ML
1/1250 Canon = 1/1300 ML
1/1600 Canon = 1/1500 ML
1/2000 Canon = 1/2000 ML
1/2500 Canon = 1/2600 ML
1/3200 Canon = 1/3100 ML
1/4000 Canon = 1/4000 ML
Title: Re: Canon 700D / T5i
Post by: a1ex on February 26, 2014, 01:41:21 PM
Okay, so TG_FREQ_BASE from fps-engio.c is wrong. Tell me the raw values (timer A and timer B) for all LiveView modes (photo, x5 zoom, all video modes and whatever else you may find).

In photo mode, shutter speed is not computed from video timers (so obviously it's correct). I'm interested in shutter speeds from video mode.

The other constants are found mostly by trial and error (TG_FREQ_*_SHUTTER are for displaying the correct shutter speed; FPS_TIMER_A_MIN and FPS_TIMER_B_MIN are safety limits, that is, make sure you get correct image when you ask for 70fps in all possible modes).
Title: Re: Canon 700D / T5i
Post by: dmilligan on February 26, 2014, 01:52:01 PM
Quote from: mk11174 on February 26, 2014, 01:30:27 PM
As for shutter speeds, certain ones are correct. In Photo Mode no Live view, just to give an idea, probably not needed for me to give all this data, but just to be detailed.
http://www.dpreview.com/forums/post/10333997
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 26, 2014, 02:08:13 PM
Quote from: a1ex on February 26, 2014, 01:41:21 PM
Okay, so TG_FREQ_BASE from fps-engio.c is wrong. Tell me the raw values (timer A and timer B) for all LiveView modes (photo, x5 zoom, all video modes and whatever else you may find).

In photo mode, shutter speed is not computed from video timers (so obviously it's correct). I'm interested in shutter speeds from video mode.

The other constants are found mostly by trial and error (TG_FREQ_*_SHUTTER are for displaying the correct shutter speed; FPS_TIMER_A_MIN and FPS_TIMER_B_MIN are safety limits, that is, make sure you get correct image when you ask for 70fps in all possible modes).
Photo Mode Live View
Timer A 528(+0)
Timer B 1011(+0)
Actual 53.951

Photo Mode Live View Zoom
Timer A 716(+0)
Timer B 1492(+0)
Actual 26.959

1280x720@60P
Timer A 528(+0)
Timer B 1011(+0)
Actual 53.951

1280x720@60P Zoom
Timer A 716(+0)
Timer B 1492(+0)
Actual 26.959

1920x1080@30P
Timer A 528(+0)
Timer B 2022(+0)
Actual 26.975

1920x1080@30P Zoom
Timer A 716(+0)
Timer B 1492(+0)
Actual 26.959

1920x1080@24P
Timer A 528(+0)
Timer B 2528(+0)
Actual 21.576

1920x1080@24P Zoom
Timer A 716(+0)
Timer B 1492(+0)
Actual 26.959

640x480@30P
Timer A 528(+0)
Timer B 2022(+0)
Actual 26.975

640x480@30P Zoom
Timer A 716(+0)
Timer B 1492(+0)
Actual 26.959


Title: Re: Canon 700D / T5i
Post by: a1ex on February 26, 2014, 02:11:25 PM
These values were with FPS override enabled, right? Can you post the values without any override? (I'm interested in the default timer values, not modified ones).
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 26, 2014, 02:17:13 PM
Quote from: a1ex on February 26, 2014, 02:11:25 PM
These values were with FPS override enabled, right? Can you post the values without any override? (I'm interested in the default timer values, not modified ones).
Ah, ok, sorry, and by the way, I noticed there is no define for 700D in fps_engio, so I used the define for 650D and FPS reads correctly. But I can still get the readings if needed?
Title: Re: Canon 700D / T5i
Post by: a1ex on February 26, 2014, 02:24:44 PM
Quote from: mk11174 on February 26, 2014, 01:30:27 PM
If I set to 60P in Canon, FPS Override shows for Exact FPS
60p Canon = Desired from 54 and Actual FPS 54.993
24p Canon = Desired from 22 and Actual FPS 21.993
30p Canon = Desired from 27 and Actual FPS 27.496

Quote from: a1ex on February 23, 2014, 11:47:18 AM
If you select 24 it should print 23.976, if you select 25 it should print 25.000, 30 should be 29.970, 60 should be 59.940 and 50 should be 50.000.
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 26, 2014, 02:28:30 PM
Quote from: a1ex on February 26, 2014, 02:11:25 PM
These values were with FPS override enabled, right? Can you post the values without any override? (I'm interested in the default timer values, not modified ones).
I updated my post above with non modified FPS and dont worry, I was not using the 650D define in fps_engio, I set it back to the way it was with no define for 700D
Title: Re: Canon 700D / T5i
Post by: a1ex on February 26, 2014, 02:33:14 PM
If you use the 650D define, do you get the exact FPS values I've quoted above? If so, just use the define from 650D. If not, I need to do the math.

Also check movie shutter speeds in both PAL and NTSC, and in all video modes / zoom / crop / whatever you have there.
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 26, 2014, 02:34:13 PM
Quote from: a1ex on February 26, 2014, 02:24:44 PM

Yes, those were the reading I got before adding the Define for 700D copying from 650D in fps_engio
After adding define I was getting the correct values much closer to normal
30p = 29.973
24p = 23.973
60p = 59.946

If I set cam to PAL
50p = 50.000
24p = 23.973
25p = 25.000

Title: Re: Canon 700D / T5i
Post by: mk11174 on February 26, 2014, 02:49:48 PM
As for shutter in PAL
25P
1/50 canon = 1/50, 180degree ml

24p
1/47 Canon = 1/47, 184degree ml

50p
1/100 Canon = 1/100, 180 degree ml


NTSC
30p
1/30 Canon = 1/30, 360 degree ml

24p
1/50 Canon = 1/47, 184 degree ml

60p
1/60 Canon = 1/60, 360 degree ml

Title: Re: Canon 700D / T5i
Post by: a1ex on February 26, 2014, 02:59:49 PM
Looks alright :D
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 26, 2014, 03:20:40 PM
Quote from: a1ex on February 26, 2014, 02:59:49 PM
Looks alright :D
Yeah, looks good enough to me. Thanks for the tip about fps_engio
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 26, 2014, 05:04:35 PM
Quote from: TAB on February 25, 2014, 05:38:44 PM
The primary feature I need is the audio meters. Should I use this version mk11174 linked above, or are audio meters available yet on the general nightly build here: http://builds.magiclantern.fm/#/
If you would like an up to date build with audio meters I updated my version so it is up to date as of today Feb 26 2014. Also includes the fps/shutter value fix.
https://bitbucket.org/mk11174/t5i/downloads (https://bitbucket.org/mk11174/t5i/downloads)
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on February 26, 2014, 05:40:04 PM
Quote from: mk11174 on February 26, 2014, 02:49:48 PM
As for shutter in PAL
25P
1/50 canon = 1/50, 180degree ml

24p
1/47 Canon = 1/47, 184degree ml

50p
1/100 Canon = 1/100, 180 degree ml


NTSC
30p
1/30 Canon = 1/30, 360 degree ml

24p
1/50 Canon = 1/47, 184 degree ml

60p
1/60 Canon = 1/60, 360 degree ml

Great news ! you sir, are my hero for the day ! :)
Thanks a lot for this. as you might saw in my previous post I was kind of desperate!

Thank you a1ex, thank you mk11174

EDIT : after copying the new 650 meters version on my camera, it wont turn on anymore... the red light is blinking the whole time and nothing else happens.

I am using this one : ML_650D_Meters_Feb_26_2014.zip

other cards without magic lantern work.
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 26, 2014, 10:11:02 PM
Quote from: ThankMeLater on February 26, 2014, 05:40:04 PM
EDIT : after copying the new 650 meters version on my camera, it wont turn on anymore... the red light is blinking the whole time and nothing else happens.

I am using this one : ML_650D_Meters_Feb_26_2014.zip

other cards without magic lantern work.
Didnt you say you had a 700D, or do you have both and maybe you are saying the 650d camera is not working with the version you downloaded??

If you only have a 700D, t5i then you should be using the 700D version not the 650d, the 650d is for the t4i.

Let me know how it goes.
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on February 26, 2014, 10:15:36 PM
Quote from: mk11174 on February 26, 2014, 10:11:02 PM
Didnt you say you had a 700D, or do you have both and maybe you are saying the 650d camera is not working with the version you downloaded??

If you only have a 700D, t5i then you should be using the 700D version not the 650d, the 650d is for the t4i.

Let me know how it goes.

ups my bad !

QuoteYes, those were the reading I got before adding the Define for 700D copying from 650D in fps_engio


Thats why i downloaded the 650 one for my 700D.
I thought the whole download folder is for 700D (the folders name is t5i) and as you said you adopted something from the 650D version to make it work i thought this would be the latest ML Version for 700D.

I hope you know what I mean  :D

Using ML_700D_Meters_Feb_26_2014.zip everything works fine on my 700D

Again, great job !
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 26, 2014, 10:18:12 PM
Quote from: ThankMeLater on February 26, 2014, 10:15:36 PM
I hope you know what I mean  :D

Using ML_700D_Meters_Feb_26_2014.zip everything works fine on my 700D
Ah, yes, I can see how that would mess someone up, its ok, I am just helping the 650d users out that want meters and this is the easiest place for me to share them, glad it is working now though.
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on February 26, 2014, 10:56:55 PM
Quote from: mk11174 on February 26, 2014, 10:18:12 PM
Ah, yes, I can see how that would mess someone up, its ok, I am just helping the 650d users out that want meters and this is the easiest place for me to share them, glad it is working now though.

its working great. tried everything so far and everything works great. the only thing is, that I can not find a way to disable the on screen audio meters.
Also I am wondering why the info at the buttom of the screen in Livemode (shutter, iso etc.) are not in colour anymore. It was usefull for beginner. (green,good/red,bad)
Title: Re: Canon 700D / T5i
Post by: TAB on February 27, 2014, 12:37:33 AM
Quote from: mk11174 on February 26, 2014, 05:04:35 PM
If you would like an up to date build with audio meters I updated my version so it is up to date as of today Feb 26 2014. Also includes the fps/shutter value fix.
https://bitbucket.org/mk11174/t5i/downloads (https://bitbucket.org/mk11174/t5i/downloads)

Awesome, thanks!

Also, I figure I should let you guys know: When I was installing ML on my T5i, I went through the same procedure as when I installed on my T3i, but with the T5i I never reached the green text screen. For a few moments after loading the firmware, there were some scattered blocks of black/white static pixels on the lcd, starting with the upper left corner, and then there was a long horizontal block of static pixels near the center of the screen. It was quite worrisome at first, especially because I never saw the green text screen, but after turning the camera off and reloading the card, ML works fine. Except, when I've tried to reformat the card with ML on it, the camera fails. It gets to "rewriting bootflags" and just completely freezes, not even the off switch works, the only way to shut it off is by pulling the battery. I've tried reformatting with keeping and deleting ML, and both times freeze the camera when it gets to rewriting bootflags.

I expect these kinds of glitches because it's a work in progress, I just wanted to make sure you guys knew about this stuff. Otherwise, it all works great!
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 27, 2014, 01:33:28 AM
Quote from: TAB on February 27, 2014, 12:37:33 AM
Awesome, thanks!

Also, I figure I should let you guys know: When I was installing ML on my T5i, I went through the same procedure as when I installed on my T3i, but with the T5i I never reached the green text screen. For a few moments after loading the firmware, there were some scattered blocks of black/white static pixels on the lcd, starting with the upper left corner, and then there was a long horizontal block of static pixels near the center of the screen. It was quite worrisome at first, especially because I never saw the green text screen, but after turning the camera off and reloading the card, ML works fine. Except, when I've tried to reformat the card with ML on it, the camera fails. It gets to "rewriting bootflags" and just completely freezes, not even the off switch works, the only way to shut it off is by pulling the battery. I've tried reformatting with keeping and deleting ML, and both times freeze the camera when it gets to rewriting bootflags.

I expect these kinds of glitches because it's a work in progress, I just wanted to make sure you guys knew about this stuff. Otherwise, it all works great!
Yeah, I don't know anything about the firmware file, I did not create it for the 700d, I starting working on this port later on and just helped a bit, but yeah, not sure what the deal was with the loading process of the bootflag, but it installed and works, so I am happy about that!  :)
Title: Re: Canon 700D / T5i
Post by: BASSPRO on February 27, 2014, 11:07:07 AM
Quote from: mk11174 on February 26, 2014, 05:04:35 PM
If you would like an up to date build with audio meters I updated my version so it is up to date as of today Feb 26 2014. Also includes the fps/shutter value fix.
https://bitbucket.org/mk11174/t5i/downloads (https://bitbucket.org/mk11174/t5i/downloads)

Brilliant work. Running perfectly on my T5i.
Title: Re: Canon 700D / T5i
Post by: Ralf0815 on February 28, 2014, 08:02:20 PM
come ml 1.1.3 version next year ? :-\
Title: Re: Canon 700D / T5i
Post by: igortupini on February 28, 2014, 09:04:11 PM
Quote from: Ralf0815 on February 28, 2014, 08:02:20 PM
come ml 1.1.3 version next year ? :-\
Yeah I'm waiting for this anxiously! :(
Title: Re: Canon 700D / T5i
Post by: mk11174 on February 28, 2014, 09:12:36 PM
Quote from: Ralf0815 on February 28, 2014, 08:02:20 PM
come ml 1.1.3 version next year ? :-\
Sorry guys, I think the DEVS are trying to prep ML for multiple FW versions for cameras before they do they next step with this port. So it could be awhile, if I was 100% sure the stubs were good to go and knew how to make the bootflag FIR file for you, I would compile a temp version for you guys to test while you were waiting, but I trust the Devs have reasons for being patient, they don't want to see any bricked cameras if they don have too.
Title: Re: Canon 700D / T5i
Post by: TAB on March 01, 2014, 01:38:45 AM
Hey, I've just noticed something weird, I'm not sure what this means (or if it has anything to do with the shutter angle discussion above).

I have ML installed on two different cards. The shutter speed options are different, even though they have identical copies of mk11174's most recent build with audio meters.

On the 1st card (used to install ML on the camera), the shutter options are:
1/27
1/34
1/41
1/52
1/68
1/82
1/100
1/140
1/160
1/210
1/270
1/320
1/420
1/540
1/650
1/840
1/1100
1/1300
1/1700
1/2200
1/2600
1/3500

On the 2nd card, the options are:
1/31
1/39
1/42
1/47
1/60
1/78
1/85
1/94
1/120
1/160
1/170
1/190
1/240
1/310
1/340
1/370
1/480
1/620
1/680
1/750
1/960
1/1300
1/1400
1/1500
1/2000
1/2600
1/2800
1/3000
1/4100

While the Canon menu settings are set to 24p, Card 2 lists the fps @ 23.973, however card 1 lists the shutter speed at 21.576. I'm trying to keep as close to 1/48 for standard shooting (so I guess 1/52 on card 1 and 1/47 on card 2).



EDIT: I just realized, I should probably mention (and might have to do with the fps variation) that they are different brand cards, where card 1 has a speed of 24mb/s, and card 2 is 30mb/s. I guess I'm wondering, is this a glitch in ML, or is it actually shooting at a different framerate than what the canon menu is set as because the card isn't fast enough? 
Title: Re: Canon 700D / T5i
Post by: topspin391 on March 01, 2014, 05:18:47 AM
когда же уже выйдет прошивка 1.1.3???
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 01, 2014, 07:59:52 AM
Quote from: TAB on March 01, 2014, 01:38:45 AM
Hey, I've just noticed something weird, I'm not sure what this means (or if it has anything to do with the shutter angle discussion above).

I have ML installed on two different cards. The shutter speed options are different, even though they have identical copies of mk11174's most recent build with audio meters.

While the Canon menu settings are set to 24p, Card 2 lists the fps @ 23.973, however card 1 lists the shutter speed at 21.576. I'm trying to keep as close to 1/48 for standard shooting (so I guess 1/52 on card 1 and 1/47 on card 2).

Looking at the card1 shutter speeds, it looks like you are using the build right before my last one which does not have the fps/shutter fix because those are the exact speeds I was getting before the fps/shutter fix.

Maybe start over, delete the autoexec.bin and the ML folder on card1 and re-download https://bitbucket.org/mk11174/t5i/downloads/ML_700D_Meters_Feb_26_2014.zip and see what happens.

Card2 is the way you want it to be, that sounds like it is using the shutter fix.

The card type should not be changing any of these things.

Sometimes if you do a copy over of the autoexec.bin file and ML folder, something may not overwrite and you will be using the older versions, thats why its best to start fresh and delete them first and unzip the new ones to card to be 100% sure.
Title: Re: Canon 700D / T5i
Post by: TAB on March 01, 2014, 08:31:00 AM
Quote from: mk11174 on March 01, 2014, 07:59:52 AM
Looking at the card1 shutter speeds, it looks like you are using the build right before my last one which does not have the fps/shutter fix because those are the exact speeds I was getting before the fps/shutter fix.

Maybe start over, delete the autoexec.bin and the ML folder on card1 and re-download https://bitbucket.org/mk11174/t5i/downloads/ML_700D_Meters_Feb_26_2014.zip and see what happens.

Card2 is the way you want it to be, that sounds like it is using the shutter fix.

The card type should not be changing any of these things.

Sometimes if you do a copy over of the autoexec.bin file and ML folder, something may not overwrite and you will be using the older versions, thats why its best to start fresh and delete them first and unzip the new ones to card to be 100% sure.

Ok, all set. I was pretty sure that I copied the same file and folder onto both cards, but evidently something got messed up.

So the only other thing at this point, is the problem that if I try to reformat a card with ML in camera, it freezes the camera and fails to completely reformat. I can always just wipe the card on my laptop, but it kind of worries me that the camera has lost the ability to reformat cards with ML running on them.
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 01, 2014, 08:42:29 AM
Quote from: TAB on March 01, 2014, 08:31:00 AM
Ok, all set. I was pretty sure that I copied the same file and folder onto both cards, but evidently something got messed up.

So the only other thing at this point, is the problem that if I try to reformat a card with ML in camera, it freezes the camera and fails to completely reformat. I can always just wipe the card on my laptop, but it kind of worries me that the camera has lost the ability to reformat cards with ML running on them.
Yeah, no big deal, with as many times as I copied over when debugging I myself have made same mistake many times.

As for format, I would not format with ML in camera myself, that is one thing I never bothered with with the 700D, maybe because how the bootflag was set up on this camera, I don't know if that has anything to do with it, I just dont want to attempt to play with that part of the code because I am scared it will brick the camera, I will just leave that to the pros. I am very pleased with how it runs on the 700D so I figure best to leave well enough alone as far as the format option.

Actually I have not formatted my card since I got my 700D and installed ML, lol, its been awhile too and have no issues at all, I just delete the files not needed.
Title: Re: Canon 700D / T5i
Post by: a1ex on March 01, 2014, 08:45:32 AM
I'll try to fix it on 5D3; if it works, I'll explain exactly what I did.

Meanwhile, I recommend disabling it from internals.h. I prefer things that are known not to work to be disabled from features.h/internals.h (so these files can actually serve as a todo list for the port maintainers).

I did the same with 5D3 123 (disabled things that don't work yet, such as fast zebras, explained why, so anyone reading the source code will know what is not working yet and may want to try to fix it).
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 01, 2014, 08:49:05 AM
Quote from: a1ex on March 01, 2014, 08:45:32 AM
I'll try to fix it on 5D3; if it works, I'll explain exactly what I did.

Meanwhile, I recommend disabling it from internals.h. I prefer things that are known not to work to be disabled from features.h/internals.h (so these files can actually serve as a todo list for the port maintainers).

I did the same with 5D3 123 (disabled things that don't work yet, such as fast zebras, explained why, so anyone reading the source code will know what is not working yet and may want to try to fix it).
Sounds good to me, disabling seems best for sure, just never even used format so did not even know if it worked, I was to scared it would mess things up, but yes, now that there is a known issue, will disable for sure. Thanks for the recommend.
Title: Re: Canon 700D / T5i
Post by: krisdeak on March 01, 2014, 01:43:17 PM
Hey guys, got my hands on a borrowed 700D to test before I buy.

I think I discovered a bug (was using MK11174's Feb26 build with the meters) and was trying to format the card leaving ML on. At the end of the process as it was 'writing bootflags' it hung and had to do a battery reset.

Another little quirk was the Magic Zoom - when I accidentally set the position to the ever-jumpy focus point, it went nuts and eventually froze.
Just thought I'd mention - otherwise it is a pretty good build, really getting there - thanks!

EDIT: I just saw you guys recently discussed the formatting issue already - sorry for not checking.
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on March 01, 2014, 02:01:58 PM
how do you guys handle the formatting issue ?

Is formatting the card on computer as good as on camera ? So far I allways formatted the card on camera, delted magic lantern and put it back on afterwards.
Or if i delete every single video on camera, is it as good as formatting ? :D

by the way i had a video shot yesterday and filmed everything with 3.0 x bitrate.. when I had about 11 GB of my 32 GB card full I could not record anymore.
Every take stoped ( video got automaticelly stoped error screen ). After formatting the card I could film everything with 3.0 x bitrate again untill I reached that 11 GB again .

I used 3x bitrate and I couldnt record anymore at 1/3 used memory. Is this normal ? seems like some buffer is fully used or something like that.
Title: Re: Canon 700D / T5i
Post by: PiNgOa on March 02, 2014, 10:34:16 AM
Hello there !

I have a little video project involving macro recording of insects. As I am totally new to video recording on a DSLR, I have a bunch of questions that some of you may be able to answer, hopefully...

1) As we can't record a RAW video @ 1080p on the 700D, will I get the best picture quality by recording in Canon's MOV if I want my final project to be exported at 1080p ? Or should I stick to RAW even at a lower resolution and with all the heavy post-processing workflow (Pink Dots Removal, image correction on Camera RAW, creation of the video on VirtualDub @ 24fps) ?

2) If I stick to Canon's MOV, does the x3.0 bitrate really help or is it just placebo ?

3) I would like to use the 180° shutter rule but the only solution I found was to set the camera on Manual mode, set the shutter to 1/50 and set aperture and ISOs consequently, the problem is that I want to record with an exposure conpensation of -2/3 IL, 'cause I found the image too bright with no exposure compensation. Why isn't the TV mode enabled ? I could set the shutter @ 1/50, the exposure compensation @ -2/3 and let the camera set both aperture and ISOs...

4) Specifically for Macro recording, what aperture would you use ? My macro lens is a Sigma 150mm f2.8...

5) What are the best settings to use in the Picture Styles ? Now i use a custom profile set at a Neutral base, Sharpness @ 3, Contrast and Saturation @ -2 and as I said, an exposure compensation set @ -2/3... Are these settings allright to you ?

Thanks in advance guys :)
Title: Re: Canon 700D / T5i
Post by: TAB on March 03, 2014, 10:46:56 PM
Quote from: ThankMeLater on March 01, 2014, 02:01:58 PM
how do you guys handle the formatting issue ?

Is formatting the card on computer as good as on camera ? So far I allways formatted the card on camera, delted magic lantern and put it back on afterwards.

Formatting on a computer is really just deleting files/folders from the card individually, while formatting in the camera is wiping everything and resetting the DCIM/MISC folders and stuff like that. Formatting on the camera is the safest way to make sure the filing system is configured right for the camera to save photos/videos properly.

I would say that the best way to do it is to manually remove ML from the card on a computer, and then reformat it in camera as usual.

QuoteOr if i delete every single video on camera, is it as good as formatting ? :D

I would recommend against this. I've always avoided deleting files individually, because over time it can screw with the negative space on the card and cause problems with the card's filing system. The best way to do it is to let the camera handle it and wipe/reset everything at the same time. Deleting every single video individually is completely different from reformatting, and could certainly cause problems.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on March 03, 2014, 10:58:39 PM
Quote from: TAB on March 03, 2014, 10:46:56 PMFormatting on a computer is really just deleting files/folders from the card individually,

That's not correct. Not at all.
Quick formating a card containing a FAT32 file system will only delete the file allocation table. You can test this by yourself and any recovery tool.
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on March 05, 2014, 03:12:54 AM
Quote from: TAB on March 03, 2014, 10:46:56 PM
Formatting on a computer is really just deleting files/folders from the card individually, while formatting in the camera is wiping everything and resetting the DCIM/MISC folders and stuff like that. Formatting on the camera is the safest way to make sure the filing system is configured right for the camera to save photos/videos properly.

I would say that the best way to do it is to manually remove ML from the card on a computer, and then reformat it in camera as usual.

I would recommend against this. I've always avoided deleting files individually, because over time it can screw with the negative space on the card and cause problems with the card's filing system. The best way to do it is to let the camera handle it and wipe/reset everything at the same time. Deleting every single video individually is completely different from reformatting, and could certainly cause problems.

Why removing magic lantern on the computer ?
Simply press Q (delete ML) when formatting the card on cam and everything is fine, isnt it ?
Title: Re: Canon 700D / T5i
Post by: BASSPRO on March 05, 2014, 03:39:51 AM
1) As we can't record a RAW video @ 1080p on the 700D, will I get the best picture quality by recording in Canon's MOV if I want my final project to be exported at 1080p ? Or should I stick to RAW even at a lower resolution and with all the heavy post-processing workflow (Pink Dots Removal, image correction on Camera RAW, creation of the video on VirtualDub @ 24fps) ?

ANS: On my T5i (700D) I raw works perfectly at 1280x720. However, as you correctly state the workflow can be quite time consuming especially if you have time restraints for your projects. Personally, I seldom shoot raw because of time restraints. That being said I get great results from the standard codec shooting with bit-rates between x1.4 - 1.6.

2) If I stick to Canon's MOV, does the x3.0 bit-rate really help or is it just placebo ?

ANS: Using a higher bit-rate will give you a slight improvement in dynamic range which will help in post, I you have poorly lit footage to work with. You won't have the headroom you get with RAW but every bit helps when grading / correcting. You can experiment with a bit-rate of x3.0 but you could pick up problems with sound. As I mentioned previously x1.4 - 1.6 is a good starting point. Remember, if you light your scene properly you can get results comparable to RAW, so take time with your lighting.

3) I would like to use the 180° shutter rule but the only solution I found was to set the camera on Manual mode, set the shutter to 1/50 and set aperture and ISOs consequently, the problem is that I want to record with an exposure conpensation of -2/3 IL, 'cause I found the image too bright with no exposure compensation. Why isn't the TV mode enabled ? I could set the shutter @ 1/50, the exposure compensation @ -2/3 and let the camera set both aperture and ISOs...

ANS: Outdoors I shoot predominantly with these settings:-  ISO 100, Shutter 1/50 (180 deg) and an f/stop that looks good, usually between f/4-f/8. If your images are over exposed, fit an ND filter. You can pick them up cheaply on eBay. Variable ND filters are by far the easiest and quickest to use. Also, I like to reduce my ZEBRA warning to 95% so as to ensure I don't accidentally over expose. Use your HISTOGRAM all the time when setting up your exposure for a shot.

4) Specifically for Macro recording, what aperture would you use ? My macro lens is a Sigma 150mm f2.8...
ANS: Depends on the effect you are trying to achieve. At 150mm f/2.8 you'll get great depth of field. Experiment with different f/stops until you achieve the desired effect.

5) What are the best settings to use in the Picture Styles ? Now i use a custom profile set at a Neutral base, Sharpness @ 3, Contrast and Saturation @ -2 and as I said, an exposure compensation set @ -2/3... Are these settings all right to you ?
ANS: Picture Styles present an open ended discussion, but for video here's where I recommend you start.

        1. ProLost Picture Style.
        ▪   Set Sharpness to zero—all the way to the left
   ▪   Set Contrast all the way to the left
   ▪   Set Saturation two notches to the left
You can get a full explanation of this Picture Style here: http://prolost.com/flat

        2. Tecnicolor Cinestyle
Download here: http://www.technicolor.com/en/solutions-services/cinestyle
This picture style has a good DR range but you have to grade the S-Curve of the image. You can get great results with this style if you spend a bit of time in post. Color Grading Central have a great S-Curve LUT (Look Up Table/Utility for Final Cut X) whicjh I use often when using the Technicolor picture style. You can can get more information on this LUT here... http://www.colorgradingcentral.com/lututility

        3. Flaat10
Download here: http://similaar.com/foto/flaat-picture-styles/index.html
Always a popular picture style and easy to work with.

Keep your sharpness level down as it helps to reduce ALIASING / MOIRE.


Hope this helps, and good luck.
Title: Re: Canon 700D / T5i
Post by: PiNgOa on March 05, 2014, 08:29:55 AM
Thank you very much for these complete answers, I really appreciate, it's gonna help me a lot !

I didn't think about any external gear but the ND filter seems to be the easiest way of doing it ! Also, thank you for your e-mail ;-)

I should also invest in a good tripod, mine is a little weak now, I bought it for a bridge a few years ago, now it has to deal with a 700D with the Sigma mounted on :D
Title: Re: Canon 700D / T5i
Post by: BASSPRO on March 05, 2014, 11:05:59 AM
Quote from: PiNgOa on March 05, 2014, 08:29:55 AM
Thank you very much for these complete answers, I really appreciate, it's gonna help me a lot !

I didn't think about any external gear but the ND filter seems to be the easiest way of doing it ! Also, thank you for your e-mail ;-)

I should also invest in a good tripod, mine is a little weak now, I bought it for a bridge a few years ago, now it has to deal with a 700D with the Sigma mounted on :D

Have a look at this tripod combo. I use one everyday and it hasn't let me down. It's lightweight and easy to carry around, not like some of the other heavyweights I have to contend with from time to time. It maybe a bit expensive but it's worth every cent.
http://www.amazon.com/Manfrotto-MVK502AM-Video-Telescoping-Carry/dp/B006LWHLSA/ref=sr_1_5?ie=UTF8&qid=1394013670&sr=8-5&keywords=MVH502A
And if you work a lot indoors pick up a set of Wheely Bars, they will save you lots of time when re-arranging scenes. They can also be used for short dolly shots. Great fun. http://www.amazon.com/s/ref=a9_sc_1?rh=i%3Aaps%2Ck%3Aravelli+wheels+bar&keywords=ravelli+wheels+bar&ie=UTF8&qid=1394014413

Title: Re: Canon 700D / T5i
Post by: PiNgOa on March 05, 2014, 12:41:35 PM
Ouch, the price of that tripod is almost the one I paid for my 700D :D
I can't afford it, I was looking for something "not too bad" around 100$, not something that good ! I'll only use it for macro and video but as it's not my job, I don't want to invest too much :-)
Title: Re: Canon 700D / T5i
Post by: BASSPRO on March 05, 2014, 12:56:04 PM
As far as I know all Canon HDSLR cameras had overlays within the HDMI signal that could not be removed making an external recording impossible.
In practise having a clean signal means that you can record the video feed to an external device like the Atomos Ninja ( http://www.atomos.com/ ) and get a ready to edit, quality encoded Apple ProRes 4:2:2 file. Does anyone know if there is a fix out there, as I believe Canon had a beta solution for the T4i / 650D.

A T5i/700D, Magic Lantern, clean HDMI and an Atomos Ninja, would be a great combination with fantastic end results.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on March 05, 2014, 04:03:25 PM
Quote from: PiNgOa on March 05, 2014, 12:41:35 PM
I can't afford it, I was looking for something "not too bad" around 100$,

Most tripods designed for photographers are not able to resist torque and that's why most video tripod legs have two (or more) parallel tubes. And yes, it means it will be not that cheap as a tripod with a simpler design. But a cheap tripod not doing the job is not exactly the best way to spend your money, even with my 2 cents counting in.

Ciao
Walter
Title: Re: Canon 700D / T5i
Post by: BASSPRO on March 05, 2014, 07:00:08 PM
Quote from: Walter Schulz on March 05, 2014, 04:03:25 PM
Most tripods designed for photographers are not able to resist torque and that's why most video tripod legs have two (or more) parallel tubes. And yes, it means it will be not that cheap as a tripod with a simpler design. But a cheap tripod not doing the job is not exactly the best way to spend your money, even with my 2 cents counting in.

Ciao
Walter

Agreed with you, 100%
Title: Re: Canon 700D / T5i
Post by: PiNgOa on March 05, 2014, 09:21:17 PM
Even with my cheap tripod I can achieve a good stabilization in macro 'cause most of the time I keep it at its most compact configuration (for an ant in the grass, I don't really need to set it at 1,20m :D )
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on March 05, 2014, 10:28:47 PM
Try pan and tilt in video and let's talk again.
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 10, 2014, 12:44:00 PM
Hey guys, I just want to let you know, I am at a stand still with anymore tweaks to 700D so I wont be able to give anymore updates since I can't test them anymore, I decided to update my firmware to 1.1.3 so I could start testing the port for you guys, I made all changes needed and compiled it, but stuck cause it wont boot, just get a blinking light as soon as I put card it, so I must have something with the boot stage wrong for now or maybe it is just that I need the proper bootflag fir from the devs, not sure about that part, but I just did not feel right having others test my guess work. Can is fine though, works without trying to load a bin file, just need to wait till Devs have free time to lead me in the right direction. But I guess if the new port was ever going to get finished, I had no choice but to update and start testing. But I just wanted to update you on the 1.1.3 progress. I am just glad I have a 550d and 600d to use ML on until it ready to go.
Title: Re: Canon 700D / T5i
Post by: smyky on March 10, 2014, 05:18:29 PM
I shoot in raw video , video duration 2m07s and when I export it in after effect was1m27s ! why ? http://www.mediafire.com/view/17vmaaer4qn6juv/yj.JPG
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 10, 2014, 07:15:59 PM
UPDATE!!! ML is loading on 113 now, no time to test, I homeschool my daughter, but thanks to 1% tipping me off on the signature, it is loading fine!  :D
Title: Re: Canon 700D / T5i
Post by: godashram on March 10, 2014, 10:49:38 PM
Now that is AWESOME!

can finally use it again soon!
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 11, 2014, 12:23:20 AM
Quote from: godashram on March 10, 2014, 10:49:38 PM
Now that is AWESOME!

can finally use it again soon!
Yeah, it is working same as it was when I was on version 111, I am not sure if you can even test it without installing the bootflag though and I believe that is only possible with a fir file the Devs make, I think I can use it because I already had it installed before I updated to 113.

So I don't know what the next step is, alls I can say is the port is working and I have been using it the last hour and I can't tell a difference from before I updated, more testers will be useful of coarse to find any glitches?

So not sure where to go from here?

I wont push it to Repo unless I get the ok because I made that mistake to many times and got the devs a bit angry for rushing pushes.  :-[

But its a start having it working and knowing its ready when the Devs tell me what to do with it.
Title: Re: Canon 700D / T5i
Post by: 1% on March 11, 2014, 12:37:23 AM
Leave a pull request.. also start making an installer. Need one that you can run as an autoexec.bin first. That's how I got the EOSM installer going, after that the a1ex or g3ggo can sign the created fir. start with "make installer" or make in the installer/700D folder after copying/fixing/checking 650D or EOSM
Title: Re: Canon 700D / T5i
Post by: godashram on March 11, 2014, 02:13:20 AM
Quote from: mk11174 on March 11, 2014, 12:23:20 AM
Yeah, it is working same as it was when I was on version 111, I am not sure if you can even test it without installing the bootflag though and I believe that is only possible with a fir file the Devs make, I think I can use it because I already had it installed before I updated to 113.

So I don't know what the next step is, alls I can say is the port is working and I have been using it the last hour and I can't tell a difference from before I updated, more testers will be useful of coarse to find any glitches?

So not sure where to go from here?

I wont push it to Repo unless I get the ok because I made that mistake to many times and got the devs a bit angry for rushing pushes.  :-[

But its a start having it working and knowing its ready when the Devs tell me what to do with it.

I did have in installed pre 1.1.3 as well.
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 11, 2014, 04:50:18 AM
Quote from: godashram on March 11, 2014, 02:13:20 AM
I did have in installed pre 1.1.3 as well.
Ok, let me do a double check on everything even though it is working fine so far, it will be best to just go over everything in case I missed something that might show up later on, I am sure bugs will happen because even as a 111 it was still a new port so all bugs were probably never found, but I will do a double check then I will upload a test build for you since you were an updater from 111 like me, but for now should only work with 111 updaters till a full commit is sent and the devs do what they do for the bootflag for the 113 cams.
Title: Re: Canon 700D / T5i
Post by: godashram on March 11, 2014, 05:10:48 PM
cool, let me know how it goes.
Title: Re: Canon 700D / T5i
Post by: kimmy24 on March 12, 2014, 03:36:24 AM
Quote from: mk11174 on March 10, 2014, 07:15:59 PM
UPDATE!!! ML is loading on 113 now, no time to test, I homeschool my daughter, but thanks to 1% tipping me off on the signature, it is loading fine!  :D

Woohoo!!! nice job mk11174!!! I hope the wait is almost over.. My 700D has been in the drybox since 1.1.3
Title: Re: Canon 700D / T5i
Post by: jlahham on March 12, 2014, 03:49:46 AM
Quote from: Traste on October 26, 2013, 01:10:10 PM
Hi The UnKnown,

I would like to donate specifically to the development of ML for 700D, do you have any donation box? :)

All the best,
Traste

YES me too, I'd love to see this go further.
Title: Re: Canon 700D / T5i
Post by: a1ex on March 12, 2014, 11:20:31 AM
Some notes for fixing the boot flag code:
http://magiclantern.wikia.com/wiki/WritingBootflagsToCard
Title: Re: Canon 700D / T5i
Post by: a1ex on March 13, 2014, 09:44:30 PM
State diagrams for 113: http://a1ex.bitbucket.org/ML/states/700D-alt/index.html
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 13, 2014, 10:44:26 PM
Quote from: a1ex on March 13, 2014, 09:44:30 PM
State diagrams for 113: http://a1ex.bitbucket.io/ML/states/700D-alt/index.html
Nice! Thanks!
Title: Re: Canon 700D / T5i
Post by: topspin391 on March 14, 2014, 12:32:11 PM
ready to test 1.1.3 on the camera, please send a mail [email protected]
Title: Re: Canon 700D / T5i
Post by: Edmund-B on March 14, 2014, 01:19:22 PM
hi, im relatively new to the forum and this is my first post.

foolishly updated my 700d to 1.1.3 and now its just sitting there. I'm no video fan how ever, the only reason why i use ML is for the different specs i can get doing time-lapse.

so if there is any thing i can do to help with the development of the 113 build i'm ready. though I'm no programmer.... and have no idea what a dump is as mentioned in a couple of posts earlier
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 14, 2014, 03:12:06 PM
Quote from: Edmund-B on March 14, 2014, 01:19:22 PM
hi, im relatively new to the forum and this is my first post.

foolishly updated my 700d to 1.1.3 and now its just sitting there. I'm no video fan how ever, the only reason why i use ML is for the different specs i can get doing time-lapse.

so if there is any thing i can do to help with the development of the 113 build i'm ready. though I'm no programmer.... and have no idea what a dump is as mentioned in a couple of posts earlier
It is almost ready to go, I would like to fix one little bug though with evf-states that freezes cam while in photo mode/ live view or 1280x720@60p mode, then I feel it is just like it was, everything else is working nicely though.
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 14, 2014, 08:59:44 PM
Ok after not getting anywhere with pretending I knew what I was doing with vsync,  :-\ I decided to keep EVF_STATE at 5 and 5. Then look closer at other things in vsync because it does have no pink frames the way it is, it just froze the cam, so I figured it had to be something else.

Well after looking through all the things that run for my camera during it, I tracked it down to digital_iso_step();

With that disabled, all is great, so now I have to see what is up with that.

But this is much less a problem because raw_rec is FAR better feature I think and the camera does not freeze at all now!

CPU% is normal now like 550D, but a little bit higher, but it probably always was, at least it does not jump right to 98% and stay there like it was doing.
Title: Re: Canon 700D / T5i
Post by: godashram on March 14, 2014, 09:41:21 PM
good to hear!

Title: Re: Canon 700D / T5i
Post by: mk11174 on March 14, 2014, 10:31:31 PM
Ok, now inside digital_iso_step function, I tracked it down to this
call("lvae_setdispgain", 0);

So now I have to look at that one.
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 14, 2014, 10:47:37 PM
Well looking at the similar cams 650D and EOS-M it seems the NSTUB for lvae_setdispgain is not in the 650D and it is NOT Used in EOSM.

It was in the 700D.111 and I guess working cause I never came across the freeze on it, and I just checked the address in IDA against the 700D.111, they are both at the
aEp_setdispgain ; " EP_SetDispGain >> OFF"  Subroutine.

So is this correct or should I simply just disable the stub and not use it?

Title: Re: Canon 700D / T5i
Post by: a1ex on March 14, 2014, 11:05:08 PM
I would double-check the stub address for "call".
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 14, 2014, 11:15:35 PM
Quote from: a1ex on March 14, 2014, 11:05:08 PM
I would double-check the stub address for "call".
HA! I was just going to mention that because I commented out the stub and it still crashed, so that was the only thing left! Cool, going to try now!  ;D
HMMM, On 650, 700D.111 and 700D.113 all in same spot
---------------------------------------------------------------------------
ROM:FF12CBC0                 STMFD   SP!, {R3-R5,LR}
ROM:FF12CBC4                 LDR     R4, =0x23C20
ROM:FF12CBC8                 ADR     R0, aFa_setcrawbi_0 ; "FA_SetCRawBitNum"
ROM:FF12CBCC                 LDR     R1, [R4,#0xD8]
ROM:FF12CBD0                 BL      sub_FF138B08
ROM:FF12CBD4                 LDR     R1, [R4,#0xDC]
ROM:FF12CBD8                 ADR     R0, aFa_setobinte_0 ; "FA_SetObIntegMode"
ROM:FF12CBDC                 BL      sub_FF138B08
ROM:FF12CBE0                 ADR     R2, aRXkgvbGhrTs ; "É-ò¬âéü[âhɦÆF"
ROM:FF12CBE4                 MOV     R1, #0x16
ROM:FF12CBE8                 MOV     R0, #0x82
ROM:FF12CBEC                 BL      0x395C
ROM:FF12CBF0                 LDR     R3, [R4,#0xEC]
ROM:FF12CBF4                 ADR     R0, aFa_setobwindow ; "FA_SetObWindow"
ROM:FF12CBF8                 STR     R3, [SP]
ROM:FF12CBFC                 ADD     R3, R4, #0xE0
ROM:FF12CC00                 LDMIA   R3, {R1-R3}
ROM:FF12CC04                 BL      sub_FF138B08
ROM:FF12CC08                 LDR     R1, [R4,#0xD4]
ROM:FF12CC0C                 ADR     R0, aFa_obintegtest ; "FA_ObIntegTestImage"
ROM:FF12CC10                 BL      sub_FF138B08
ROM:FF12CC14                 ADD     R1, R4, #0xF0
ROM:FF12CC18                 ADR     R0, aFa_getobintegp ; "FA_GetObIntegPram"
ROM:FF12CC1C                 BL      sub_FF138B08
ROM:FF12CC20                 ADD     R1, R4, #0xF4
ROM:FF12CC24                 ADR     R0, aFa_getobintegp ; "FA_GetObIntegPram"
ROM:FF12CC28                 BL      sub_FF138B08
ROM:FF12CC2C                 ADD     R1, R4, #0xF8
ROM:FF12CC30                 ADR     R0, aFa_getobintegp ; "FA_GetObIntegPram"
ROM:FF12CC34                 BL      sub_FF138B08
ROM:FF12CC38                 ADD     R1, R4, #0xFC
ROM:FF12CC3C                 ADR     R0, aFa_getobintegp ; "FA_GetObIntegPram"
ROM:FF12CC40                 BL      sub_FF138B08
ROM:FF12CC44                 ADR     R2, aWhitecIcbRXkcI ; "WHITEù¦êµü@É-ò¬ù¦êµÉ¦ÆFü@ü


And this is where its SUB is
OM:FF138B08 ; =============== S U B R O U T I N E =======================================
ROM:FF138B08
ROM:FF138B08
ROM:FF138B08 sub_FF138B08                            ; CODE XREF: ROM:FF12CBD0p
ROM:FF138B08                                         ; ROM:FF12CBDCp ...
ROM:FF138B08
ROM:FF138B08 var_20          = -0x20
ROM:FF138B08 var_14          = -0x14
ROM:FF138B08 varg_r0         = -0x10
ROM:FF138B08 varg_r1         = -0xC
ROM:FF138B08 varg_r2         = -8
ROM:FF138B08 varg_r3         = -4
ROM:FF138B08
ROM:FF138B08                 STMFD   SP!, {R0-R3}
ROM:FF138B0C                 STMFD   SP!, {R3-R5,LR}
ROM:FF138B10                 LDR     R0, =0x2440C
ROM:FF138B14                 LDR     R1, [SP,#0x20+varg_r0]
ROM:FF138B18                 SUB     R4, R0, #0x1C
ROM:FF138B1C                 STR     R0, [SP,#0x20+var_20]
ROM:FF138B20                 LDR     R0, [R4,#4]
ROM:FF138B24                 ADD     R5, SP, #0x20+varg_r1
ROM:FF138B28                 MOV     R2, SP
ROM:FF138B2C                 BL      sub_FF33F948
ROM:FF138B30                 LDR     R2, [R4,#8]!
ROM:FF138B34                 LDR     R1, [SP,#0x20+varg_r0]
ROM:FF138B38                 LDR     R0, [R4,#0xC]
ROM:FF138B3C                 BLX     R2
ROM:FF138B40                 LDR     R0, [SP,#0x20+var_20]
ROM:FF138B44                 LDMIA   R0, {R1,R2}
ROM:FF138B48                 MOV     R0, R5
ROM:FF138B4C                 BLX     R2
ROM:FF138B50                 LDMFD   SP!, {R3-R5}
ROM:FF138B54                 LDR     PC, [SP+0x14+var_14],#0x14
ROM:FF138B54 ; End of function sub_FF138B08
ROM:FF138B54
ROM:FF138B58
ROM:FF138B58 ; =============== S U B R O U T I N E =======================================
Title: Re: Canon 700D / T5i
Post by: godashram on March 14, 2014, 11:21:15 PM
someone is on a roll today
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 14, 2014, 11:42:29 PM
Any way to call something else there just to see what happens, or to test call out? I took out lvae_setdispgain from the "" but I don't know if that would really work to test "call" out but it doesn't crash with that out of the call?
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 15, 2014, 12:06:02 AM
Quote from: godashram on March 14, 2014, 11:21:15 PM
someone is on a roll today
Maybe disabling the 2 call lines to it is just delaying the freeze, I have worked it for a few minutes with no freeze, maybe u want to test it too? AS you know, it normally only takes 15seconds of scrolling through Canon or ML menus to freeze it, only in Photomode while in Live view and Movie MOde at 1280x720x60p though, so test in those modes, that puts the cam at 60fps which is when it freezes.

But so far I cant get it too, maybe you will have differ luck?
Title: Re: Canon 700D / T5i
Post by: godashram on March 15, 2014, 12:07:57 AM
sure, why not! i'll have a couple of hours tonight and tomorrow........
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 15, 2014, 12:28:52 AM
Ok here you go, lets see what you come up with!

Anyone else with 700D, do not bother using this unless you had Firmware 111 and ran ML on it already, then by accident updated to Firmware 113 without realizing ML would not work anymore.

All users that started with Firmware 113 you will need to wait for the 700D.1113.FIR to get the bootflag on your camera first.

https://bitbucket.org/mk11174/t5i-backup/downloads/magiclantern-v2.3.NEXT.2014Mar14.700D113.zip (https://bitbucket.org/mk11174/t5i-backup/downloads/magiclantern-v2.3.NEXT.2014Mar14.700D113.zip)

ALSO: Please remove ML folder and old Autoexec.bin first before unzipping this to your card.
Title: Re: Canon 700D / T5i
Post by: godashram on March 15, 2014, 12:52:17 AM
15+ minutes in live view photo with no problems yet.... using various modes, especially manual and a+.

will try video later tonight.

Also, with the histogram on, it appears, flickering, in the ML menus.

with movie crop mode on, tapping the magnifying glass behaves as if you hit the info button. some items disappear, but hitting info brings them back.

beyond that, pretty solid so far.... closing in on 30 minutes with no lockups
Title: Re: Canon 700D / T5i
Post by: Edmund-B on March 15, 2014, 12:53:50 AM
Quote from: mk11174 on March 15, 2014, 12:28:52 AM


Anyone else with 700D, do not bother using this unless you had Firmware 111 and ran ML on it already, then by accident updated to Firmware 113 without realizing ML would not work anymore.

All users that started with Firmware 113 you will need to wait for the 700D.1113.FIR to get the bootflag on your camera first.



*cries*
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 15, 2014, 01:23:42 AM
Quote from: godashram on March 15, 2014, 12:52:17 AM
15+ minutes in live view photo with no problems yet.... using various modes, especially manual and a+.

will try video later tonight.

Also, with the histogram on, it appears, flickering, in the ML menus.

with movie crop mode on, tapping the magnifying glass behaves as if you hit the info button. some items disappear, but hitting info brings them back.

beyond that, pretty solid so far.... closing in on 30 minutes with no lockups
Nice!!, I like how good you test stuff, very in depth  :)
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 15, 2014, 01:24:29 AM
Quote from: Edmund-B on March 15, 2014, 12:53:50 AM
*cries*
As soon as the bootflag is done for it, you will be able to install it, don't worry!
Title: Re: Canon 700D / T5i
Post by: Edmund-B on March 15, 2014, 02:13:16 AM
Quote from: mk11174 on March 15, 2014, 01:24:29 AM
As soon as the bootflag is done for it, you will be able to install it, don't worry!

meanwhile, any thing i should be reading on? i didn't really get the hang of installing unstable releases yet.
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on March 15, 2014, 03:59:57 AM
Even though I already have ML running on my 111 firmware I want to say thanks to mk11174 for his great work !  :)
Title: Re: Canon 700D / T5i
Post by: Xtreme on March 15, 2014, 04:03:44 AM
Many Thanks MK11174, i was waiting for this everyday  :)

Work perfecly here too. !!!!!!!!

Very good job !
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 15, 2014, 05:29:30 AM
Really good to hear everyone!! Lets hope it stays that way with everyone!  :D
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 15, 2014, 06:32:10 AM
You can try this one too. It has a patch for MZ that still works pretty good, much better then without the patch that is for sure.

Try MZ and move it around and you will see crazy flickering, but with this patch Nanomad put out a couple weeks ago, it stays really steady, maybe a jitter ever so often.

And this one also has the full time meters unlike the last one I posted with meters during record only.

AGAIN, any of these 113 versions will only be for users who updated from 111 that already had ML installed while in 111 firmware. Until further notice.
https://bitbucket.org/mk11174/700d113/downloads/magiclantern-v2.3.NEXT.2014Mar15.700D113_AudioMeters.zip]https://bitbucket.org/mk11174/700d113/downloads/magiclantern-v2.3.NEXT.2014Mar15.700D113_AudioMeters.zip

UPDATE: Use this link instead, it fixes restore after Format plus the permanent fix to the PhotoMode/LV freeze.
https://bitbucket.org/mk11174/700d113/downloads/magiclantern-v2.3.NEXT.2014Mar15.700D113_Audio_Meters_FormatFix.zip (https://bitbucket.org/mk11174/700d113/downloads/magiclantern-v2.3.NEXT.2014Mar15.700D113_Audio_Meters_FormatFix.zip)
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 16, 2014, 04:44:19 PM
OK, IT IS HERE!!!!!! 113 USERS!!!

Go get your 700D 113 Build in the nightlies!
http://builds.magiclantern.fm/#/ (http://builds.magiclantern.fm/#/)

It includes the firmware file for the bootflag.

Follow these 5D3 instructions for installing.
http://www.magiclantern.fm/forum/index.php?topic=11017 (http://www.magiclantern.fm/forum/index.php?topic=11017)
Title: Re: Canon 700D / T5i
Post by: kimmy24 on March 16, 2014, 04:56:14 PM
@mk11174, you're the man!
Title: Re: Canon 700D / T5i
Post by: Felipe on March 16, 2014, 05:24:21 PM
@mk11174, you're the man!
Some time ago I was wondering why the external flash in live view didn't work using ML options, Well this might be good info for one of the developers like
mk11174 or Alex, The SL1 or 100D, Does fire external flashes in live view, I'm not a developer , but probably one of you guys could check the code and see
how it goes to apply it to the 650D, 700D or probably to all those ML Cameras that don't do this.
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 16, 2014, 05:30:42 PM
Much CREDIT goes to Alex and 1% for all the advice along the way! And Alex again for creating the bootflag installer FIR file.
Title: Re: Canon 700D / T5i
Post by: Felipe on March 16, 2014, 08:53:47 PM
Alex and 1% Great work
Title: Re: Canon 700D / T5i
Post by: mateusz on March 17, 2014, 12:28:10 AM
On http://builds.magiclantern.fm/#/features  700D is displayed twice :)
Title: Re: Canon 700D / T5i
Post by: Unimpressive on March 17, 2014, 01:45:45 AM
Awesome! Much thanks to mk11174 for taking this on for us. And Alex and 1% too.
Title: Re: Canon 700D / T5i
Post by: godashram on March 17, 2014, 06:55:12 AM
happy that we are finally at this point!
Title: Re: Canon 700D / T5i
Post by: asilnevs on March 17, 2014, 04:12:36 PM
Thanks, this is great.  ;)
Are the audio meters still active in this latest nightly build for the 1.1.3 firmware and are they always visible, even when not recording video?
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on March 17, 2014, 04:46:04 PM
just to make this clear, you don't need the EOScard tool anymore for the 113 version ?
so you simply install ML like on the 600D ? This should also mean you can disable the bootflag now, right ?

If so, is it worth updating my 700D to 113 now ?
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 17, 2014, 05:40:27 PM
Quote from: ThankMeLater on March 17, 2014, 04:46:04 PM
just to make this clear, you don't need the EOScard tool anymore for the 113 version ?
so you simply install ML like on the 600D ? This should also mean you can disable the bootflag now, right ?

If so, is it worth updating my 700D to 113 now ?
Yes, start fresh, use EOScard to remove bootflag from card first, the format card on camera, then copy ML folder, Autoexec.bin and 700D.111.FIR file from nightly zip file to your card and simply goto Firmware update in Canon menu and update with the ML 700D.111.FIR file.

You wont need EOScard anymore to mess with bootflag, just re-update with ML firmware and do what it says to disable bootflag if you choose too.

But of coarse if you are still on Canon 111 firmware, upgrade to Canon 113 first.

700D 113 is working just as good as it was with 111 now, actually better because format now works.
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 17, 2014, 05:43:27 PM
Quote from: asilnevs on March 17, 2014, 04:12:36 PM
Thanks, this is great.  ;)
Are the audio meters still active in this latest nightly build for the 1.1.3 firmware and are they always visible, even when not recording video?
No, audio meters were never in the nightly, and won't be till the audio chip is properly coded, but you can get updates with audio meters here: https://bitbucket.org/mk11174/700d113/downloads (https://bitbucket.org/mk11174/700d113/downloads)

The latest one is always the better choice of coarse.
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 17, 2014, 06:54:45 PM
Sorry I forgot to add chris_overseas to my credit post, if it was not for him I would of still been stuck at the dump part I think, he is the one that explained very well the port starting process, plus I was able to look at his 5D3 port update to know what I had to change, so super helpful!

And can't forget Nanomad, Science, and TheUnknown for the start of the 700D 1.1.1 port to begin with!

I just like giving credit where credit is do  :)
Title: Re: Canon 700D / T5i
Post by: asilnevs on March 17, 2014, 07:35:17 PM
Ok, it's working with the audiometers and now I can format the card without losing ML.
And the biggest advantage: I don't need EOScard anymore, this means that I don't need Windows anymore in my Virtualbox in Ubuntu :-)
A big thanks to all the devs.
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on March 17, 2014, 08:49:27 PM
Quote from: mk11174 on March 17, 2014, 05:40:27 PM
Yes, start fresh, use EOScard to remove bootflag from card first, the format card on camera, then copy ML folder, Autoexec.bin and 700D.111.FIR file from nightly zip file to your card and simply goto Firmware update in Canon menu and update with the ML 700D.111.FIR file.

You wont need EOScard anymore to mess with bootflag, just re-update with ML firmware and do what it says to disable bootflag if you choose too.

But of coarse if you are still on Canon 111 firmware, upgrade to Canon 113 first.

700D 113 is working just as good as it was with 111 now, actually better because format now works.

Ok im not sure if i got you right.

-I should remove bootflag from my 700D 111 with eoscard
(how do i do that btw ?... i allways heard here in forum that you cannot remove bootflag if it is installed with eoscard method)

- then upgrade to canon 113 and then put the new ML version on it ?
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 17, 2014, 10:41:11 PM
Quote from: ThankMeLater on March 17, 2014, 08:49:27 PM
Ok im not sure if i got you right.

-I should remove bootflag from my 700D 111 with eoscard
(how do i do that btw ?... i allways heard here in forum that you cannot remove bootflag if it is installed with eoscard method)

- then upgrade to canon 113 and then put the new ML version on it ?
Just put card in PC, load EOScard and uncheck all the options and then Save it, this just makes card not bootable, nothing to do with camera.

Then put card in cam and format it as low level. This will clear card like new so you get a fresh start.

Then if you have firmware 1.1.1 on your camera, I mean the CANON firmware, then go to Canon.com and get the 1.1.3 Firmware update and update your camera to it.

Now you are ready for ML.

Just copy all the files from the nightly for 700D.113 zip files to the sdcard, put card in camera and do another firmware update, this will setup your bootflag for 1.1.3 ML to work, very simple and restart camera when it says, then ML will load.
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on March 17, 2014, 11:18:02 PM
Quote from: mk11174 on March 17, 2014, 10:41:11 PM
Just put card in PC, load EOScard and uncheck all the options and then Save it, this just makes card not bootable, nothing to do with camera.

Then put card in cam and format it as low level. This will clear card like new so you get a fresh start.

Then if you have firmware 1.1.1 on your camera, I mean the CANON firmware, then go to Canon.com and get the 1.1.3 Firmware update and update your camera to it.

Now you are ready for ML.

Just copy all the files from the nightly for 700D.113 zip files to the sdcard, put card in camera and do another firmware update, this will setup your bootflag for 1.1.3 ML to work, very simple and restart camera when it says, then ML will load.

perfect, thank you.
Title: Re: Canon 700D / T5i
Post by: Denisad on March 18, 2014, 12:49:45 PM
Do I still have to clear my personal settings before the procedure? I'm that lazy.
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 18, 2014, 01:18:34 PM
Quote from: Denisad on March 18, 2014, 12:49:45 PM
Do I still have to clear my personal settings before the procedure? I'm that lazy.
well, that is a canon rule, so i would think so, must be a reason why they say to do so.
Title: Re: Canon 700D / T5i
Post by: Denisad on March 18, 2014, 02:34:14 PM
You are right, I had to.
Title: Re: Canon 700D / T5i
Post by: sjm on March 19, 2014, 11:42:31 AM
Quote from: Denisad on March 18, 2014, 02:34:14 PM
You are right, I had to.

Well,  I did not, and I had no problems. Everything seems fine, no issues yet.

Many, many thanks to mk11174 !!!!!
Title: Re: Canon 700D / T5i
Post by: Denisad on March 19, 2014, 07:36:38 PM
Everything appears to work. I don't have the audio meters for the video, though; there has been some chat about those that I'll have to go back to. I believe I must install another file, am I right? Great work all the same. :)
Title: Re: Canon 700D / T5i
Post by: darthvedor on March 19, 2014, 08:11:47 PM
Unfortunately I only have a 64GB card. I read some where it is not advisable for ML. Can someone help to resolve the same? Sorry for out of scope question, but thought its better to ask T5i users who are using nightly builds.
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 19, 2014, 10:30:23 PM
Quote from: Denisad on March 19, 2014, 07:36:38 PM
Everything appears to work. I don't have the audio meters for the video, though; there has been some chat about those that I'll have to go back to. I believe I must install another file, am I right? Great work all the same. :)
Yes, a differ version from here https://bitbucket.org/mk11174/700d113/downloads (https://bitbucket.org/mk11174/700d113/downloads)

Choose the latest one that says AudioMeters.
Title: Re: Canon 700D / T5i
Post by: crocodile on March 20, 2014, 09:30:31 AM
movie crop function is very good for me . Thankyou very much.
Title: Re: Canon 700D / T5i
Post by: Denisad on March 20, 2014, 03:17:42 PM
Oh dear. Well, I clear my settings, re-format the card and I see that ML has gone when I open it on the computer. I copy the Audio Meters files, open it again in the camera, go to Firmware and there get an error message telling me that I need a card containing the firmware to perform the update, even though the menu reads 'firmware 113' quite clearly. I turn the camera off then back on, just in case, but nothing doing. So, I format the card once more, back to PC, copy the 113 firmware update, back to camera, and there perform update from 113 to er, 113 without a hitch. Take card back to PC, copy ML files once more, back again to camera where I  perform yet another firmware update cos I think I'm getting rather good at it, but cannot find a trace of Lantern never mind Magic anywhere. I repeated the whole procedure once more to no avail. I'm dashed. Any hints?
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 20, 2014, 03:24:09 PM
Quote from: Denisad on March 20, 2014, 03:17:42 PM
Oh dear. Well, I clear my settings, re-format the card and I see that ML has gone when I open it on the computer. I copy the Audio Meters files, open it again in the camera, go to Firmware and there get an error message telling me that I need a card containing the firmware to perform the update, even though the menu reads 'firmware 113' quite clearly. I turn the camera off then back on, just in case, but nothing doing. So, I format the card once more, back to PC, copy the 113 firmware update, back to camera, and there perform update from 113 to er, 113 without a hitch. Take card back to PC, copy ML files once more, back again to camera where I  perform yet another firmware update cos I think I'm getting rather good at it, but cannot find a trace of Lantern never mind Magic anywhere. I repeated the whole procedure once more to no avail. I'm dashed. Any hints?
http://builds.magiclantern.fm/#/

Try getting ML from this place first to be sure you have everything you need.
Title: Re: Canon 700D / T5i
Post by: Audionut on March 20, 2014, 03:25:46 PM
Format the card in camera.
Put the card in the PC reader.
Download the latest nightly build from the link above
Extract the contents of the zip file
Copy contents to the card
Put card in camera
Run firmware update.
Title: Re: Canon 700D / T5i
Post by: Denisad on March 20, 2014, 08:41:15 PM
A very simple routine, Audionut, and well within my capabilities. As it happens, I had another go, the same old way, and this time it stuck. The funny thing is that ML loaded up upon starting the camera without my having to do the firmware update again. Don't ask.
Title: Re: Canon 700D / T5i
Post by: wacru1 on March 21, 2014, 02:24:08 PM
ok, i'm up and running w/1.1.3 and the 3/21 nightly. the date of the audio meters fix is 3/15. how do i add the audio code to the 3/21 build? or did i miss something?
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 21, 2014, 03:02:27 PM
Quote from: wacru1 on March 21, 2014, 02:24:08 PM
ok, i'm up and running w/1.1.3 and the 3/21 nightly. the date of the audio meters fix is 3/15. how do i add the audio code to the 3/21 build? or did i miss something?
you can just use the 3/15 audio meters version, theres nothing knew for our cam that is in the nightly.
Title: Re: Canon 700D / T5i
Post by: kgmusic on March 21, 2014, 03:40:28 PM
So, do I get this right?  We are not supposed to make the card bootable?  Just format, copy files, stick it in the camera and run the firmware update?

BTW, thanks a lot for making the update for the new firmware.  :-)
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 21, 2014, 04:42:46 PM
Quote from: kgmusic on March 21, 2014, 03:40:28 PM
So, do I get this right?  We are not supposed to make the card bootable?  Just format, copy files, stick it in the camera and run the firmware update?

BTW, thanks a lot for making the update for the new firmware.  :-)
No, dont need to make it bootable, the firmware will do that now.
Title: Re: Canon 700D / T5i
Post by: Edmund-B on March 21, 2014, 04:54:37 PM
so ive been running 700d 113 since it came out. im used to the 550's interface so now im rly happy with the c leaner UI

been shooting timelapse like crazy and all seems well only for one thing: trying to turn off the intervalometer in the middle of shooting thru the UI will not work. it will say its off, but it will keep on shooting. turning off the camera does it though.

To do: im gonna test the "start after feature" with long hourse such as 8h. in the stable release, the 550 and 600d woulnt work well unless uve done it 2-3times.

over all, this is functioning great for me ! thank you ! any thing else u guys want me to test in timelapse mode?
Title: Re: Canon 700D / T5i
Post by: kgmusic on March 21, 2014, 05:28:31 PM
Thanks!  I also heard of the install not running well on 64 GB cards.  Will the installer work with my 64 GB card?

K
Title: Re: Canon 700D / T5i
Post by: a1ex on March 21, 2014, 05:31:46 PM
Try it and tell us.
Title: Re: Canon 700D / T5i
Post by: kgmusic on March 21, 2014, 05:42:05 PM
Ha!  I did try it.  My friend dared me.  It installed fine with my 64GB card.

One more thing, when I was updating the firmware, there was also another firmware update for the camera lens.  It reads:
Lens           Ver.1.5.0

I have the 18-135mm STM lens that comes with the kit on the camera right now.  Is this firmware update specifically for that lens?  Or is it a general update for all camera lenses?  What is it for?  Do I have to run it for ML to work properly?

Title: Re: Canon 700D / T5i
Post by: mk11174 on March 21, 2014, 06:25:24 PM
Quote from: kgmusic on March 21, 2014, 05:42:05 PM
Ha!  I did try it.  My friend dared me.  It installed fine with my 64GB card.

One more thing, when I was updating the firmware, there was also another firmware update for the camera lens.  It reads:
Lens           Ver.1.5.0

I have the 18-135mm STM lens that comes with the kit on the camera right now.  Is this firmware update specifically for that lens?  Or is it a general update for all camera lenses?  What is it for?  Do I have to run it for ML to work properly?

K
Its just for the cam, don't even need a lens on the cam to make it work.
Title: Re: Canon 700D / T5i
Post by: kgmusic on March 21, 2014, 07:34:16 PM
So why is there a lens firmware update listed in the firmware update screen on my camera?
Title: Re: Canon 700D / T5i
Post by: a1ex on March 21, 2014, 07:36:03 PM
Canon designed it in this way, so... just ask them ;)
Title: Re: Canon 700D / T5i
Post by: darthvedor on March 23, 2014, 09:29:37 AM
Installed "magiclantern-Nightly.2014Mar23.700D113.zip" and everything seems to be working fine. Thanks to all developers for making this Magical wonder :)

However I tried uninstalling ML by following this instruction from post below:

http://www.magiclantern.fm/forum/index.php?topic=11017

Uninstallation:
1) Run Firmware Update from your ML card.
2) Follow the instructions.

It says "to remove bootflag wait for 30 seconds" after (27 secs)  which the camera goes blank. But the ML still stays. Tried booting camera with card and it just won't boot. Can someone help me uninstall this? Thanks in advance.
Title: Re: Canon 700D / T5i
Post by: ricardoalvez on March 24, 2014, 03:03:29 AM
Quote from: darthvedor on March 23, 2014, 09:29:37 AM
Installed "magiclantern-Nightly.2014Mar23.700D113.zip" and everything seems to be working fine. Thanks to all developers for making this Magical wonder :)

However I tried uninstalling ML by following this instruction from post below:

http://www.magiclantern.fm/forum/index.php?topic=11017

Uninstallation:
1) Run Firmware Update from your ML card.
2) Follow the instructions.

It says "to remove bootflag wait for 30 seconds" after (27 secs)  which the camera goes blank. But the ML still stays. Tried booting camera with card and it just won't boot. Can someone help me uninstall this? Thanks in advance.


audio recording is working?
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 24, 2014, 06:29:51 AM
Quote from: ricardoalvez on March 24, 2014, 03:03:29 AM

audio recording is working?
It works fine on my camera. Maybe your power off settings are interfering with it, check in ur canon menu and make sure your power off time is longer just to make sure its not shutting it off first. Not sure if that is the issue, just a guess, but I tested it and it removes the bootflag fine here so it should also work on yours.
Title: Re: Canon 700D / T5i
Post by: godashram on March 26, 2014, 07:04:24 PM
still have to heavily test before the next convention that would require me to use my camera, but really happy/excited for the possibilities.
Title: Re: Canon 700D / T5i
Post by: divinesnail01 on March 27, 2014, 02:40:36 AM
I'm sorry if I've missed this somewhere; I've read the entire thread and haven't seen it.

I'm interested in 2 features:  focus peaking when shooting video, and the HDR mode.  I had ML installed on a T3i and "fell in love" with those features.  Now I have a T5i, and would like to have the same features on that camera. 

I realize the risk of bricking the camera is low, but if those features aren't available / working, I'll skip the risk entirely.

Thanks for your answers, and to all who are working on this.

'snail
Title: Re: Canon 700D / T5i
Post by: divinesnail01 on March 27, 2014, 04:04:12 AM
Quote from: divinesnail01 on March 27, 2014, 02:40:36 AM
I'm sorry if I've missed this somewhere; I've read the entire thread and haven't seen it.

I'm interested in 2 features:  focus peaking when shooting video, and the HDR mode.  I had ML installed on a T3i and "fell in love" with those features.  Now I have a T5i, and would like to have the same features on that camera. 

I realize the risk of bricking the camera is low, but if those features aren't available / working, I'll skip the risk entirely.

Thanks for your answers, and to all who are working on this.

'snail

I got brave and installed it.  Yes, those two features seem to work quite nicely.

Again, thanks to all who are working on this.
Title: Re: Canon 700D / T5i
Post by: cybermarmotte on March 27, 2014, 10:47:50 AM
So it won't be long to get the 700d support in the stable version
Title: Re: Canon 700D / T5i
Post by: mk11174 on March 30, 2014, 01:22:02 PM
Just to update everyone, nanomad merged in the meter patch I commited so the meters should be in the nightly soon, so you won't have to get the version from my download site anymore!!!  :D
Title: Re: Canon 700D / T5i
Post by: Duna on April 01, 2014, 02:56:51 PM
Hey, I'm new to ML and I am looking to use it mainly for Video. I've seen the only way to get rid of AGC is through Magic Lantern and want to disable AGC on my 700d. I installed the newest Nightly Build and the option to disable AGC was not present.
Do you know when they will be implementing this into ML for the 700d?

Thanks,
Title: Re: Canon 700D / T5i
Post by: godashram on April 01, 2014, 08:10:36 PM
That portion is being worked on, but if you want to kill AGC now, do not shoot video in any Auto mode. switch to manual, for example. and in the Canon menu, you can adjust the gain levels there.  My cam isn't on me atm, so i can't give you specifics, except the audio options you are looking for are in the video section of the canon menu.
Title: Re: Canon 700D / T5i
Post by: nevednez on April 02, 2014, 08:29:19 AM
I would like to thank the developers for all the effort and time you invest in this firmware. Really superb application.

Yesterday I finally installed ML on my 700D. During testing, I noticed the following:

1. When I press the ISO button, I miss the function for adjusting the white balance and ISO with cross keys (up-down for Kelvin and right-left for ISO).  On my 600d camera I can press the SET button for automatic white balance and color shift. Usually I use this feature a lot, because it is very convenient and fast in run&gun situations.

2. Magic Zoom works but in my case it's useless because the enlarged image continuosly flashes. I also miss the green bars when object is in focus. 

3. Is it possible that the battery is empty very quickly (about 10-15 minutes)?

Title: Re: Canon 700D / T5i
Post by: mk11174 on April 02, 2014, 06:45:16 PM
Quote from: nevednez on April 02, 2014, 08:29:19 AM
I would like to thank the developers for all the effort and time you invest in this firmware. Really superb application.

Yesterday I finally installed ML on my 700D. During testing, I noticed the following:

1. When I press the ISO button, I miss the function for adjusting the white balance and ISO with cross keys (up-down for Kelvin and right-left for ISO).  On my 600d camera I can press the SET button for automatic white balance and color shift. Usually I use this feature a lot, because it is very convenient and fast in run&gun situations.

2. Magic Zoom works but in my case it's useless because the enlarged image continuosly flashes. I also miss the green bars when object is in focus. 

3. Is it possible that the battery is empty very quickly (about 10-15 minutes)?


The shortcuts for ISO and KEL are still there, just go into Pref menu in ML and go into Misc key settings and turn on LCD Sensor Shorcuts, also, check Arrow/Set shortcuts menu in Pref menu and set the shortcuts how you would like them.

Then you can use the Face Sensor above the viewfinder to activate them and switch through them.

You will also need to have LCD auto off Enabled in Canon menu to use the sensor feature.

And yes, MZ flickers, no fix for that yet, but its not so bad of your not moving around much.

I don't know what happen to the green indicator box for it, it has never had it or worked on this camera as far as I know.

I don't notice battery draining anymore then my other cams, also, one way to test it is to uninistall ML and test a full charge battery on it compared to a full charged battery using ML, but don't forget, the more features you use, the higher the cpu will be used so that should drain battery faster then without ML, so it just depends on the features you use I guess.
Title: Re: Canon 700D / T5i
Post by: BASSPRO on April 03, 2014, 06:30:47 PM
Today I upgraded my firmware to ver 1.1.3 and everything is running perfectly with the latest nightly build.  I look forward to seeing the audio meters in future builds. Well done to all those concerned for the great work.
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 03, 2014, 06:50:21 PM
Quote from: BASSPRO on April 03, 2014, 06:30:47 PM
Today I upgraded my firmware to ver 1.1.3 and everything is running perfectly with the latest nightly build.  I look forward to seeing the audio meters in future builds. Well done to all those concerned for the great work.
The audio meters should be working the latest nightly, I made the changes a few days ago.  :)
Title: Re: Canon 700D / T5i
Post by: TAB on April 04, 2014, 02:43:47 AM
Quote from: mk11174 on April 03, 2014, 06:50:21 PM
The audio meters should be working the latest nightly, I made the changes a few days ago.  :)

Hey mk11174, I'm still on 1.1.1, running your Feb 26 build. I'm just trying to decide if/when it's worth the firmware upgrade, because right now I'm doing perfectly well with this old version. I'm just wondering, as of right now, if the current nightly build of 1.1.3 is up to par with the Feb 26 111?
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 04, 2014, 05:40:43 AM
Quote from: TAB on April 04, 2014, 02:43:47 AM
Hey mk11174, I'm still on 1.1.1, running your Feb 26 build. I'm just trying to decide if/when it's worth the firmware upgrade, because right now I'm doing perfectly well with this old version. I'm just wondering, as of right now, if the current nightly build of 1.1.3 is up to par with the Feb 26 111?
Oh!, Heck Yeah!, def upgrade, 1.1.3 is working just fine even better and has audio meters turned on in the nightly now, def just as stable as 1.1.1 And the 1.1.3 is more up to date than 1.1.1 actually, 1.1.1 is obsolete now.  ;D
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on April 04, 2014, 07:56:13 AM
Quote from: mk11174 on April 04, 2014, 05:40:43 AM
Oh!, Heck Yeah!, def upgrade, 1.1.3 is working just fine even better and has audio meters turned on in the nightly now, def just as stable as 1.1.1 And the 1.1.3 is more up to date than 1.1.1 actually, 1.1.1 is obsolete now.  ;D

Just for beeing able to format the card in cam without removing magic lantern it is worth it  8)
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 04, 2014, 10:11:39 AM
FOR 700D/T5i ONLY!!!

I created a module to give us 700D users use of Manual Audio Input within ML Audio menu if anyone is interested in giving it a shot.

To make full use of it, set Canon Audio to Auto so when you use the module, there is a AGC on or off option that will only allow the AGC to go back ON if you have Auto selected it Canon menu, so in case your one that may want to do a quick switch from Manual to Auto, just set Canon to Auto and this module will allow you to turn AGC On or Off, and when it is Off, then you can use the Gain option to manually adjust the recording input right from ML just like the other models.

https://bitbucket.org/mk11174/t5i-backup/downloads (https://bitbucket.org/mk11174/t5i-backup/downloads)

This is a good temp option until the Audio chip is properly coded.

And great thing, its just a module, so if you don't want to use it, just tell ML not to load the module.

IMPORTANT: You will need the latest nightly to use this module since it uses SetVolumeIn stub which I added April 3rd, so you will want the April 3rd or newer of the nightly http://builds.magiclantern.fm/#/ (http://builds.magiclantern.fm/#/)

Hope it works for you as good as it works for me!  :)
Title: Re: Canon 700D / T5i
Post by: a1ex on April 04, 2014, 10:18:14 AM
Since it uses Canon API, does it make any difference compared to Canon menu adjustments?

(AGC off and gain control are already in Canon menu afaik)
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 04, 2014, 10:28:07 AM
No it does not, it is the same as Canons audio, just for the users who would rather control Audio from ML menu, it has no advantage over Canon audio adjusting.

I have been awake 26 hours and its now 5am, so that question sounded totally differ the first time I read it, so strange when that happens. lol
Title: Re: Canon 700D / T5i
Post by: asilnevs on April 04, 2014, 06:30:07 PM
The audio gain controle was what I was waiting for.
It works great, thanks.  ;)
Title: Re: Canon 700D / T5i
Post by: Felipe on April 05, 2014, 06:22:39 AM
Quote from: mk11174 on April 04, 2014, 10:11:39 AM
FOR 700D/T5i ONLY!!!
I created a module to give us 700D users use of Manual Audio Input within ML Audio menu if anyone is interested in giving it a shot.

Can this module be used on the 650D or can you make one for that one with the shorcuts , so can be adjusted calling the control from the eye sensor, is that too much to ask for ? ?
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 05, 2014, 06:48:30 AM
it most likely can be used on 650d just need to add the stub, not sure bout the eye sensor thing?
Title: Re: Canon 700D / T5i
Post by: Felipe on April 05, 2014, 03:15:33 PM
Quote from: mk11174 on April 05, 2014, 06:48:30 AM
it most likely can be used on 650d just need to add the stub, not sure bout the eye sensor thing?

Arrow set shortcuts is the name of the function, when you activate the eye sensor, shows some shortcuts to adjust iso, kelvin speeed etc, will be great if you with your brilliant mind get to use that for the recording level while recording. Can you add a stub for the 650D  ?
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 05, 2014, 09:58:13 PM
Quote from: Felipe on April 05, 2014, 03:15:33 PM
Arrow set shortcuts is the name of the function, when you activate the eye sensor, shows some shortcuts to adjust iso, kelvin speeed etc, will be great if you with your brilliant mind get to use that for the recording level while recording. Can you add a stub for the 650D  ?
I know how to make the Audio Out and Rec In shortcuts turn on so you can use them, but there for the main ML source audio code, I don't know enough about coding to make this module temporarily connect to just the RecIn part of the code on the main source, which I believe is (mgain) for Analog Gain. If there was a way for me to use that just for our cameras since we don't have Audio controls, then it would be possible. Only other option is to copy and use the code for Arrow shortcuts with LCD sensor activation, but that seems a bit to much for my brain to get working into the module. So for now, I think this way will have to do until we have real Audio Control.

I wont try to commit any changes for this to the main source because it is only a temp solution, that is why I am putting it into a module so the only thing I have to add is a stub.

But I can add the stub for setvolumein though if you want to see if module works on 650d too.
Title: Re: Canon 700D / T5i
Post by: Felipe on April 05, 2014, 10:35:46 PM
Quote from: mk11174 on April 05, 2014, 09:58:13 PM
But I can add the stub for setvolumein though if you want to see if module works on 650d too.

Sure I'll love to try it
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 05, 2014, 10:57:36 PM
Quote from: Felipe on April 05, 2014, 10:35:46 PM
Sure I'll love to try it
If it don't get added to nightly or you curious to try now for the 650D, you can use the 650D build from here https://bitbucket.org/mk11174/magic-lantern/downloads (https://bitbucket.org/mk11174/magic-lantern/downloads), it is up to date with the main repo.

Just put it in red to not confuse any 700D users since this thread is about 700D. 700D users already have everything you need in the ML Nightly.

Let me know if it works out, don't see why it won't, it is very basic code, nothing camera specific in it, nothing fancy either, so it should work same as on 700D.
Title: Re: Canon 700D / T5i
Post by: Felipe on April 05, 2014, 11:40:53 PM
Yes it does work perfect on the 650D JUST LIKE THE 700D
Thank you
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 06, 2014, 01:02:04 AM
Quote from: Felipe on April 05, 2014, 11:40:53 PM
Yes it does work perfect on the 650D JUST LIKE THE 700D
Thank you
That is great, thanks for letting me know!
Title: Re: Canon 700D / T5i
Post by: nanomad on April 06, 2014, 08:25:20 AM
Merged. Thanks mk :)
Title: Re: Canon 700D / T5i
Post by: Felipe on April 06, 2014, 02:11:20 PM
Quote from: nanomad on April 06, 2014, 08:25:20 AM
Merged. Thanks mk :)
Please merge that in the 650D Also
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 06, 2014, 07:21:44 PM
Quote from: Felipe on April 06, 2014, 02:11:20 PM
Please merge that in the 650D Also
It already is, it will be in next nightly  :)
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 06, 2014, 07:27:31 PM
By the way, I added the feature to go from Internal Mic to External mic and vice versa while an Internal Mic is plugged in, but is it really of any use to do that? If there is, I will keep it in the module.

Only advantage is if for some reason you want to quickly switch to your internal mics without messing with the mic plug on cam if one is plugged in, but again, does anyone ever do that?

I can't do anything cool like putting int on one channel and ext on another channel, just the basic disable external mic while it is still plugged in.
Title: Re: Canon 700D / T5i
Post by: Felipe on April 06, 2014, 07:36:52 PM
Quote from: mk11174 on April 06, 2014, 07:27:31 PM
By the way, I added the feature to go from Internal Mic to External mic and vice versa while an Internal Mic is plugged in, but is it really of any use to do that? If there is, I will keep it in the module.

Only advantage is if for some reason you want to quickly switch to your internal mics without messing with the mic plug on cam if one is plugged in, but again, does anyone ever do that?

I can't do anything cool like putting int on one channel and ext on another channel, just the basic disable external mic while it is still plugged in.

It is interesting for example for some reason we can record isolated sounds with the shotgun on camera, and suddenly ambient recording with the omni build in.

Another situation could be the shotgun on camera gets static sounds or some how gets strange sounds  by hardware problems, then switch to internal and at least get some audio
( For this last situation a headphone jack will be necessary )
Title: Re: Canon 700D / T5i
Post by: godashram on April 06, 2014, 08:40:32 PM
Quote from: mk11174 on April 06, 2014, 07:27:31 PM
By the way, I added the feature to go from Internal Mic to External mic and vice versa while an Internal Mic is plugged in, but is it really of any use to do that? If there is, I will keep it in the module.

Only advantage is if for some reason you want to quickly switch to your internal mics without messing with the mic plug on cam if one is plugged in, but again, does anyone ever do that?

I can't do anything cool like putting int on one channel and ext on another channel, just the basic disable external mic while it is still plugged in.

leave it in. between this and the audio meters, if for whatever reason your ext mic is NOT detected (or on), then you have visual feedback. can be great for troubleshooting a mic, cable or port issue.
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 06, 2014, 10:23:53 PM
Here is the build with mic feature and kept it simple and just did no multiply so it goes from 0 to 63 now but gets there fast so its still faster then Canon.

You will need the whole thing because it uses 2 mic stubs not yet in main source.

https://bitbucket.org/mk11174/magic-lantern/downloads/magiclantern-Nightly.2014Apr06.700D113.zip
Title: Re: Canon 700D / T5i
Post by: Felipe on April 06, 2014, 11:03:57 PM
I personally think that 63 levels is too much, too many clicks to adjust levels, Say for example my Panasonic P2 Broadcast camera that has build in XLR connectors and good
Preamps, plus a Headphone jack has only 14 levels, 21 levels is fine but 63 ???
Another thing , Was great to test  this but, the feature external and internal mic , can lead to mistakes I will not use it.
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 07, 2014, 05:24:50 AM
Quote from: Felipe on April 06, 2014, 11:03:57 PM
I personally think that 63 levels is too much, too many clicks to adjust levels, Say for example my Panasonic P2 Broadcast camera that has build in XLR connectors and good
Preamps, plus a Headphone jack has only 14 levels, 21 levels is fine but 63 ???
Another thing , Was great to test  this but, the feature external and internal mic , can lead to mistakes I will not use it.
What about something like this one?
"REMOVED LINK"

This one can be used with the Nightly, I took out the mic feature.

If you get a crash, you need to delete the vol_adj.cfg file in ml/settings folder it might use old settings for levels and crash it, so just delete that file to get it working, prob best to delete it anyway before you try it to start clean.
Title: Re: Canon 700D / T5i
Post by: godashram on April 07, 2014, 06:29:32 PM
Quote from: Felipe on April 06, 2014, 11:03:57 PM
I personally think that 63 levels is too much, too many clicks to adjust levels, Say for example my Panasonic P2 Broadcast camera that has build in XLR connectors and good
Preamps, plus a Headphone jack has only 14 levels, 21 levels is fine but 63 ???
Another thing , Was great to test  this but, the feature external and internal mic , can lead to mistakes I will not use it.

while true since the on cam pre-amps suck..... i can't think of a single reason any human would ever need it to go that high... at the same time, single increments helps with fine tuning, allowing you to find that sweet spot.
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 07, 2014, 07:32:51 PM
Ok, here are the 3 differ versions of the rec input adjust module.

These will work fine with the nightly builds. The module is nothing fancy, does not do anything different than what Canon Audio menu does, it just allows you to control mic gain from ML.

Also, make sure don't use 2 versions at one time, if you want more than one version ready to go you can have them all on the card, just don't have more then 1 loaded for use.

"updated from 63 to 64 because 64 was actually the max"
64step Version  https://bitbucket.org/mk11174/magic-lantern/downloads/vol_64.mo (https://bitbucket.org/mk11174/magic-lantern/downloads/vol_64.mo)

21step Version https://bitbucket.org/mk11174/magic-lantern/downloads/vol_21.mo (https://bitbucket.org/mk11174/magic-lantern/downloads/vol_21.mo)

"fixed the numbers by 4db since I was multiplying by 4, I had no reason to add db choices by 2" DOH!!
still no clue if each step is the db, but for now this is how its setup, I will update each range if I ever figure it out.
Just think of it as a fancier way to step by 4's instead of 1 or 3 like in 64step and 21step
db Version https://bitbucket.org/mk11174/magic-lantern/downloads/vol_db.mo (https://bitbucket.org/mk11174/magic-lantern/downloads/vol_db.mo)

"zip file with all versions"
All versions  https://bitbucket.org/mk11174/magic-lantern/downloads/All_Vol_Adj_Modules.zip (https://bitbucket.org/mk11174/magic-lantern/downloads/All_Vol_Adj_Modules.zip)
Title: Re: Canon 700D / T5i
Post by: Ramon on April 07, 2014, 10:14:40 PM
Works great with my 700D!

Wasn't sure about things at first, but I got it installed finally and tried out some different things.
I haven't tried all features yet, but the HDR recording works very good in 50 fps 720p for slow movements. Flawless on a slow SanDisk class 6 card.

Raw recording is ok. I'm using a samsung 32GB SDXC which is rated for 40MB/s write, but does about 30MB/s for me :p I can record for about 30 seconds at 1344x562, which is 2.39:1 (30.2MB/s).. with hacks off. Frame rate varies from 23.973 to 23.983, but I'm not sure if even that's 100% accurate ;\ With this card I can only get a couple of seconds on higher resolutions. Getting some 600x komputerbay cards soon btw.
1728x972 (16:9) is the max I can set it to, when I go higher it will say ".... is not possible in current video mode (max 1728)." Not that I would possibly be able to record at that rate on an sd card.. 67.2MB/s.. or am I? xD

Largest .RAW file that I have (from recording at 1344x562) is a 923MB file containing an amount of 732 .dng images
I used the raw2dng_cs2x2.exe (pink dot removing raw2dng) to get the image sequence.

Here are some stills of some of my raw test shots using a 'Canon 50mm f/1.4', wide open to f2.2 in low light at 800 ISO.
These have only been quickly edited in Adobe Camera Raw, but NOT graded, NOT denoised, nothing else.
The image is noisy, but I prefer this over H.264 by far, especially for close up shots where the details are so much better.

(http://oi60.tinypic.com/ejykvm.jpg) (http://oi60.tinypic.com/ejykvm.jpg)
(http://oi57.tinypic.com/2nh1dfl.jpg) (http://oi57.tinypic.com/2nh1dfl.jpg)
(http://oi57.tinypic.com/1z1e0e1.jpg) (http://oi57.tinypic.com/1z1e0e1.jpg)
(http://oi62.tinypic.com/ruz5eh.jpg) (http://oi62.tinypic.com/ruz5eh.jpg)
(posted in original resolution, open the images by clicking if your screen is too small)

Hope this kind of helped, if there is anything else I can do to help improve this project, I would be glad to.

P.s. would anyone know a real good sd card for raw recording? And what would be the maximum 'actual' write speed for that?
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 08, 2014, 10:47:52 AM
Hi, I just want to make note to protect ML from support questions while using the vol adjust module.

ML has nothing to do with the module, try at your own risk and if module is buggy, just ask me for help because it is not part of the great ML.

I don't want the Devs bother by questions for this module even though the module is very basic and straight foward, you adjust the mic input from 0 to 21 or 0 to 64, I know, sound hard  :P
but I really want to make it clear for the Devs of ML, its not supported by ML, I will be your only support for it.

When the audio chip is coded by whoever, I will delete the module from the forum since it won't be needed.

Again, the values for the dB version are most likely wrong, I tried to get the real values and make sure they are what they say, but the document is to complicated for me  :-\
I just simply felt like beefing the GUI up so I did, simple as that.

But the modules, whichever you choose to use work just fine for what I intended, control mic input from within ML GUI and it works just fine for me and other users so feel free to try it out if you want.
Title: Re: Canon 700D / T5i
Post by: TAB on April 09, 2014, 06:37:39 AM
Quote from: mk11174 on April 08, 2014, 10:47:52 AM
Hi, I just want to make note to protect ML from support questions while using the vol adjust module.

ML has nothing to do with the module, try at your own risk and if module is buggy, just ask me for help because it is not part of the great ML.

I don't want the Devs bother by questions for this module even though the module is very basic and straight foward, you adjust the mic input from 0 to 21 or 0 to 64, I know, sound hard  :P
but I really want to make it clear for the Devs of ML, its not supported by ML, I will be your only support for it.

When the audio chip is coded by whoever, I will delete the module from the forum since it won't be needed.

Again, the values for the dB version are most likely wrong, I tried to get the real values and make sure they are what they say, but the document is to complicated for me  :-\
I just simply felt like beefing the GUI up so I did, simple as that.

But the modules, whichever you choose to use work just fine for what I intended, control mic input from within ML GUI and it works just fine for me and other users so feel free to try it out if you want.

Ok, so just to confirm, is the 0-64 version identical in function to the Canon menu?

Title: Re: Canon 700D / T5i
Post by: mk11174 on April 09, 2014, 07:09:40 AM
Quote from: TAB on April 09, 2014, 06:37:39 AM
Ok, so just to confirm, is the 0-64 version identical in function to the Canon menu?
Yes, 64 steps is exact how many steps there are in canon left to right manual audio control.

0 to 21 will just go through 64 steps faster by skipping 3 steps.

dB version is just for looks since I could not really find the dB values, I just wanted to play with the GUI, yes, it does work, but the values don't mean anything other then a step by 4.

I would just use 0 to 64 keep it real and simple, 21 version only if you feel you don't need use of all 64 steps and dont mind skipping every 3.
Title: Re: Canon 700D / T5i
Post by: jlahham on April 09, 2014, 08:20:43 AM
Quote from: Ramon on April 07, 2014, 10:14:40 PM
Works great with my 700D!

Wasn't sure about things at first, but I got it installed finally and tried out some different things.
I haven't tried all features yet, but the HDR recording works very good in 50 fps 720p for slow movements. Flawless on a slow SanDisk class 6 card.

Raw recording is ok. I'm using a samsung 32GB SDXC which is rated for 40MB/s write, but does about 30MB/s for me :p I can record for about 30 seconds at 1344x562, which is 2.39:1 (30.2MB/s).. with hacks off. Frame rate varies from 23.973 to 23.983, but I'm not sure if even that's 100% accurate ;\ With this card I can only get a couple of seconds on higher resolutions. Getting some 600x komputerbay cards soon btw.
1728x972 (16:9) is the max I can set it to, when I go higher it will say ".... is not possible in current video mode (max 1728)." Not that I would possibly be able to record at that rate on an sd card.. 67.2MB/s.. or am I? xD

Largest .RAW file that I have (from recording at 1344x562) is a 923MB file containing an amount of 732 .dng images
I used the raw2dng_cs2x2.exe (pink dot removing raw2dng) to get the image sequence.

Here are some stills of some of my raw test shots using a 'Canon 50mm f/1.4', wide open to f2.2 in low light at 800 ISO.
These have only been quickly edited in Adobe Camera Raw, but NOT graded, NOT denoised, nothing else.
The image is noisy, but I prefer this over H.264 by far, especially for close up shots where the details are so much better.


Hope this kind of helped, if there is anything else I can do to help improve this project, I would be glad to.

P.s. would anyone know a real good sd card for raw recording? And what would be the maximum 'actual' write speed for that?

Dude, these look great..congrats. Now are these stills from a footage or just photos. The grain is soft enough to keep interesting but not distract much from the image ...real promising ..can't wait to install it on my T5i
Title: Re: Canon 700D / T5i
Post by: TAB on April 09, 2014, 03:24:48 PM
Quote from: mk11174 on April 02, 2014, 06:45:16 PM
And yes, MZ flickers, no fix for that yet, but its not so bad of your not moving around much. I don't know what happen to the green indicator box for it, it has never had it or worked on this camera as far as I know.

Somebody should work on this, because the flicker is kind of annoying, and green focus confirmation would make this feature super awesome. I also wish I could activate magic zoom using the live view magnification buttons, rather than focus ring + half shutter. That said, right now I can make the box disappear with the - button, but I wish it was set up to formally work with + as well.

And thanks for the audio modules mk11174, working great for me!
Title: Re: Canon 700D / T5i
Post by: nanomad on April 09, 2014, 09:13:19 PM
Focus confirm is something we can't just do right now because is missing from the Canon side, or at least I couldn't find the appropriate memory area.

Flickering is tricky because there's no proper vsync hook
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 09, 2014, 10:13:36 PM
Quote from: nanomad on April 09, 2014, 09:13:19 PM
Focus confirm is something we can't just do right now because is missing from the Canon side, or at least I couldn't find the appropriate memory area.

Yeah, same here, the current address only seems to work in AF, I was trying to get Trap Focus to work last week but the only way it would work was if I set it to AF and disabled the if statement for Trap Focus to wait for manual focus, and that makes it useless, but I was just seeing if it at least worked.

Using memory browser on current consts address does return 1 but only in AF mode.

I was hoping there was a way to trick the camera into thinking it was in AF mode while in MF mode, but if there is, that is way to advanced for me.
Title: Re: Canon 700D / T5i
Post by: smyky on April 10, 2014, 10:46:31 PM

(http://img5.fotos-hochladen.net/uploads/capturetl4a1u25cj.jpg) help me, how to remove on my image dng ?
Title: Re: Canon 700D / T5i
Post by: godashram on April 10, 2014, 11:10:31 PM
a few pages back, you need the pink dot removal tool
Title: Updraded to Canon 700D / T5i
Post by: acenothing on April 12, 2014, 07:09:34 PM
I recently upgrade from T3i to T5i and I wanted to install ML like on my T3i.  I can not figure out what you all are using since the regular download does not show it supports T5i.  In addition the notes on the nightly release seems a bit too technical for me.  Can anyone help by telling me:
1. The normal ML will work
2. A simple step by step process to install the nightly releases
3. What version is everyone in this forum using

Thanks
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 12, 2014, 07:16:26 PM
1: No
2: Download latest nightly build, expand contents to local disk, copy contents to card. Start cam with card inserted, run Canon's firmware update procedure, restart cam and press trashcan button.
3: Whatever version makes them happy ...
Title: Re: Canon 700D / T5i
Post by: acenothing on April 13, 2014, 02:22:36 AM
Quote from: Walter Schulz on April 12, 2014, 07:16:26 PM
1: No
2: Download latest nightly build, expand contents to local disk, copy contents to card. Start cam with card inserted, run Canon's firmware update procedure, restart cam and press trashcan button.
3: Whatever version makes them happy ...

Thanks.  I must be something wrong.  I
1. formatted a card
2. download "Nightly.2014Apr09.700D113". 
3. extracted contents
4. copied contents to card
5. put card back in
6. turned on camera
7. when to format
8. selected format firmware
9. got a quick look at and update screen
10. all went black
11. after 5 minutes I had to pull the battery.

Camera is ok but am I doing something wrong?
Title: Re: Canon 700D / T5i
Post by: asilnevs on April 13, 2014, 08:33:34 AM
First of all you have to upgrade to Canons latest Firmware 113 and after that you can install ML.
Title: Re: Canon 700D / T5i
Post by: BASSPRO on April 13, 2014, 03:15:08 PM
Canon T5i (700D) and Atomos Ninja.

Is anyone working on, or found, a solution for the black frame around the Atomos Ninja's image. Up until this day all Canon DSLR cameras have overlays within the HDMI signal that cannot be removed making the external recording un-useable. Can this be remedied with Magic Lantern or is it a canon Firmware issue?
Title: Re: Canon 700D / T5i
Post by: acenothing on April 13, 2014, 04:38:07 PM
Quote from: asilnevs on April 13, 2014, 08:33:34 AM
First of all you have to upgrade to Canons latest Firmware 113 and after that you can install ML.

That was it THANKS !!!!     :D
Title: Re: Canon 700D / T5i
Post by: Dmain03 on April 14, 2014, 12:53:53 AM
Much love to you geniuses for making this happen. Words cant express how much I appreciate your guys work. AMAZE!!!!!!!
You turned my 700D into a weapon!!!!!
Title: Re: Canon 700D / T5i
Post by: Underbully on April 17, 2014, 07:46:34 AM
Ok can someone please set me straight on what I need to know to get ML installed onto my 700D . It would be greatly appreciated thanks in advance.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 17, 2014, 08:25:52 AM
This is going to be recursive ...
You need Canon's firmware 1.1.3 and step 2 from http://www.magiclantern.fm/forum/index.php?topic=5951.msg111306#msg111306
Title: Re: Canon 700D / T5i
Post by: Underbully on April 17, 2014, 02:10:39 PM
Thankyou kind sir for your reply... It is just a little bit confusing sorry thanks for clearing it up for me I am excited to try out 9 exposure brackets for hdr..

EDIT : Installed without a hitch thankyou :D Cannot wait to try
Title: Re: Canon 700D / T5i
Post by: jetkrazee on April 20, 2014, 03:32:06 PM
Well I decided to load ML on our relatively new 700. I LOVE LOVE LOVE it! Thank you to all that have worked so hard to make this possible. 8)
Title: Re: Canon 700D / T5i
Post by: Ramon on April 24, 2014, 01:16:16 AM
Quote from: jlahham on April 09, 2014, 08:20:43 AM
Dude, these look great..congrats. Now are these stills from a footage or just photos. The grain is soft enough to keep interesting but not distract much from the image ...real promising ..can't wait to install it on my T5i

Yep, those were stills from the raw footage ^^ The difference is huge, though it would be awesome to be able to record in a bit higher resolution.. but SD cards don't really seem to be fast enough, haha :p Show me some of your results too, when you get to it


Can anyone tell if the 1.1.3 version is alright? I'm still using the 1.1.1 version, but since the 1.1.1 Canon firmware can not be downloaded, I want to be sure that I'll be fine when installing 1.1.3 :p
Title: Re: Canon 700D / T5i
Post by: godashram on April 24, 2014, 07:36:35 PM
Quote from: BASSPRO on April 13, 2014, 03:15:08 PM
Canon T5i (700D) and Atomos Ninja.

Is anyone working on, or found, a solution for the black frame around the Atomos Ninja's image. Up until this day all Canon DSLR cameras have overlays within the HDMI signal that cannot be removed making the external recording un-useable. Can this be remedied with Magic Lantern or is it a canon Firmware issue?

That would be nice to see if it's a hardware or software limitation
Title: Re: Canon 700D / T5i
Post by: TokyoDon on April 25, 2014, 05:13:52 AM
Hello lovely people-

I'm having an absolute nightmare of a time trying to load ML onto my 700D from a mac. Watched a few youtube videos, and they did it through a card reading program that only works with windows. I can't even find the file to re-download on the forums. If anyone could help a quasi-retarded, shit-scared grown ass man, I'd really appreciate it. Thanks in advance.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 25, 2014, 07:06:41 AM
Video is outdated ... which happens a lot.

1. Make sure to have Canon's firmware version 1.1.3 installed
2. Format your card using a cardreader
3. Format your card in your cam
4. Download latest nightly build -> Top of page -> Downloads -> Browse Nightly Builds -> 700D.113
5. Expand contents
6. Copy contents (ML directory, AUTOEXEC.BIN, 700D_113.FIR) to card (cardreader again).
7. Insert card to cam, startup, call Canon's firmware update and follow instructions
8. Done ... almost: You will struggle mastering all those options you got ...

Ciao
Walter
Title: Re: Canon 700D / T5i
Post by: jlahham on April 26, 2014, 10:55:45 PM
Any specific settings when formatting the card in the reader? NTFS or FAT32...?
Title: Re: Canon 700D / T5i
Post by: jlahham on April 27, 2014, 01:08:56 AM
Another question .. Is the pinkdots problem a nightly release problem only? or would it persist in the stable release?
Title: Re: Canon 700D / T5i
Post by: Ramon on April 27, 2014, 12:36:34 PM
Quote from: jlahham on April 26, 2014, 10:55:45 PM
Any specific settings when formatting the card in the reader? NTFS or FAT32...?

Quote from: jlahham on April 27, 2014, 01:08:56 AM
Another question .. Is the pinkdots problem a nightly release problem only? or would it persist in the stable release?

I'm thinking thats a problem with this type of camera? ;\ not sure.
When using the raw2dng_cs2x2.exe.. which removes the pink dots, the dots are still visible in bright white areas.. as the dots become pure white
I have to say that it works ok for now, I can't spot them at all on my usual shots.. the process isn't a hassle at all, because you have to do the raw2dng thing anyway ^^

About the cards thing, I would like to have some more info as well.. I'm running my cards on ExFAT now, with the default allocation size (don't really know what that means). I use ExFAT because now I'm able to record a full 32GB SD card of raw footage in one take. I'm wondering if the format settings or allocation size will make a difference in write speeds ;o
Title: Re: Canon 700D / T5i
Post by: a1ex on April 27, 2014, 12:41:24 PM
Quote from: Ramon on April 27, 2014, 12:36:34 PM
When using the raw2dng_cs2x2.exe.. which removes the pink dots, the dots are still visible in bright white areas.. as the dots become pure white

Do you have a DNG sample? Upload one from both plain raw2dng and the cs2x2 one.
Title: Re: Canon 700D / T5i
Post by: Ramon on April 27, 2014, 03:28:47 PM
Quote from: a1ex on April 27, 2014, 12:41:24 PM
Do you have a DNG sample? Upload one from both plain raw2dng and the cs2x2 one.

Sure thing, here is a dropbox link with both dng files and jpeg samples
https://www.dropbox.com/sh/53zqqoccz4jetfr/iUGVj8GvBO

I know.. lame frame :p but the white dots were very well visible on this one ^^

I should mention, that I noticed now I've looked further into this. The white dots are hardly, if not at all visible when the dng is not edited. However, when you bring the highlights, whites or exposure down.. you will start to see them.

Here are some image samples:

This is how both images look, straight from raw2dng and an edited one - pink dots
(https://dl.dropboxusercontent.com/sh/53zqqoccz4jetfr/M5DQZcQn_m/raw2dng.jpg?token_hash=AAH5OcrmsOkVmQIi-9fV8NGEVrVqrIgm5X1MxsQSmClxoA)

Edited one - becomes horrible ;\
(https://dl.dropboxusercontent.com/sh/53zqqoccz4jetfr/mhjRIAP_gb/raw2dng-edited.jpg?token_hash=AAH5OcrmsOkVmQIi-9fV8NGEVrVqrIgm5X1MxsQSmClxoA)


Here is how both the raw2dng_cs2x2 versions look (pink dots removed) - very nice
(https://dl.dropboxusercontent.com/sh/53zqqoccz4jetfr/5L1_aDsUHs/raw2dng_cs2x2.jpg?token_hash=AAH5OcrmsOkVmQIi-9fV8NGEVrVqrIgm5X1MxsQSmClxoA)

Edited one - pitty :(
(https://dl.dropboxusercontent.com/sh/53zqqoccz4jetfr/W6HUt30eXF/raw2dng_cs2x2-edited.jpg?token_hash=AAH5OcrmsOkVmQIi-9fV8NGEVrVqrIgm5X1MxsQSmClxoA)


Hopes this helps ^^
Keep up the good work,

Ramon
Title: Re: Canon 700D / T5i
Post by: jlahham on April 27, 2014, 09:19:40 PM
Quote from: Ramon on April 27, 2014, 12:36:34 PM
I'm thinking thats a problem with this type of camera? ;\ not sure.
When using the raw2dng_cs2x2.exe.. which removes the pink dots, the dots are still visible in bright white areas.. as the dots become pure white
I have to say that it works ok for now, I can't spot them at all on my usual shots.. the process isn't a hassle at all, because you have to do the raw2dng thing anyway ^^

Speaking of raw2dng_cs2x2.exe do you know of any good links where I can find the latest? I keep coming across links that don't work anymore or spam. Your help is most appreciated.

Thanks
A follow up,
I did find a version of raw2dng but it didn't get rid of the pinkdots, any specific settings I'm missing? Here's the a frame of the footage
http://1.bp.blogspot.com/-9Z_7TJrTlxs/U11f-o7e3nI/AAAAAAAADAI/uSE2lHJ4C00/s1600/pinkdots.jpg
Title: Re: Canon 700D / T5i
Post by: Ramon on April 28, 2014, 12:32:34 AM
Quote from: jlahham on April 27, 2014, 09:19:40 PM
Speaking of raw2dng_cs2x2.exe do you know of any good links where I can find the latest? I keep coming across links that don't work anymore or spam. Your help is most appreciated.

Thanks
A follow up,
I did find a version of raw2dng but it didn't get rid of the pinkdots, any specific settings I'm missing? Here's the a frame of the footage
http://1.bp.blogspot.com/-9Z_7TJrTlxs/U11f-o7e3nI/AAAAAAAADAI/uSE2lHJ4C00/s1600/pinkdots.jpg

Nice frame ^^

Someone in the chat linked me one, back when I was installing ML. It might even be an older version? ;\ I tried to find a list of them, but wasn't really able to find a good list :(
I found a lot of downloads to different ones linked on this thread http://www.magiclantern.fm/forum/index.php?topic=6658.350

I noticed there are different ones. The one I have is just called raw2dng_cs2x2.exe
Will look into this later
Title: Re: Canon 700D / T5i
Post by: jlahham on May 02, 2014, 08:57:44 AM
This is my very first successful try shooting RAW with some color grading, https://vimeo.com/93571005 I noticed some relatively visible grain although I was very careful keeping the ISO low, any advice?

Thanks
Title: Re: Canon 700D / T5i
Post by: godashram on May 02, 2014, 07:57:36 PM
Quote from: jlahham on May 02, 2014, 08:57:44 AM
This is my very first successful try shooting RAW with some color grading, https://vimeo.com/93571005 I noticed some relatively visible grain although I was very careful keeping the ISO low, any advice?

Thanks

considering the environment, i think the grain worked in your favor :) looks good.
Title: Re: Canon 700D / T5i
Post by: jlahham on May 05, 2014, 10:04:06 PM
Hey guys,
I'm having some troubles with the ML UI flickering over the Canon's UI and sometimes freezing the camera..anything I can do to prevent that from happening?

Thanks
Title: Re: Canon 700D / T5i
Post by: Ramon on May 05, 2014, 11:50:38 PM
Quote from: jlahham on May 05, 2014, 10:04:06 PM
Hey guys,
I'm having some troubles with the ML UI flickering over the Canon's UI and sometimes freezing the camera..anything I can do to prevent that from happening?

Thanks

Hmmh.. I don't think I've had those problems before. What version are you running? I'm running the old 1.1.1 from feb 09, and it seems very good.
I was thinking about installing a new 1.1.3 version, but once I do that I can't go back ^^ so any other flaws I should know about before installing it? ;\
Title: Re: Canon 700D / T5i
Post by: jlahham on May 06, 2014, 12:03:35 AM
Quote from: Ramon on May 05, 2014, 11:50:38 PM
Hmmh.. I don't think I've had those problems before. What version are you running? I'm running the old 1.1.1 from feb 09, and it seems very good.
I was thinking about installing a new 1.1.3 version, but once I do that I can't go back ^^ so any other flaws I should know about before installing it? ;\

I'm in 1.1.3
Title: Re: Canon 700D / T5i
Post by: godashram on May 06, 2014, 11:32:19 PM
I'm on 1.1.3 and haven't had flickering issues, but then again, I'm on a nightly from 2 weeks ago....
Title: Re: Canon 700D / T5i
Post by: mk11174 on May 07, 2014, 02:41:23 AM
Quote from: jlahham on May 05, 2014, 10:04:06 PM
Hey guys,
I'm having some troubles with the ML UI flickering over the Canon's UI and sometimes freezing the camera..anything I can do to prevent that from happening?

Thanks
Hmm, not sure about that one, I have never experienced that issue at all and I am using up to date source and never had anything like this happen since 1.1.3 was created.
Title: Re: Canon 700D / T5i
Post by: mlost on May 14, 2014, 04:21:30 AM
I've got a problem with installing or using ML on my 700D (firmware 1.1.3). I used the nightly builds for this, followed the steps and when I install the ML.fir I get the following screen:
Magic Lantern install; Boot flag is already set; Making card bootable; Done; Please restart
(in the right corner: Firmware 0, Bootdisk -1, Ram_exe -1, Update -1)

When I restart the camera, it boots into the usual Canon mode with some small lines on top and bottom (stating my lens and the nightly build).

I never get a green screen or the ML menue.
What do I do wrong?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on May 14, 2014, 07:01:58 AM
Quote from: mlost on May 14, 2014, 04:21:30 AM
I never get a green screen or the ML menue.
What do I do wrong?

Not reading the User Guide?
Press trashcan button ...
Title: Re: Canon 700D / T5i
Post by: mlost on May 14, 2014, 01:00:52 PM
Quote from: Walter Schulz on May 14, 2014, 07:01:58 AM
Not reading the User Guide?
Press trashcan button ...

Thanks Walter for this hint. I read really a lot, googled a lot for this issue. The user guide didn't cross my mind, when I couldn't even use ML. But if hitting the trashcan button is so vital to start it then you could also blame all those who failed to mention this to newbies in their installation/usage guides.
Title: Re: Canon 700D / T5i
Post by: jlahham on May 20, 2014, 09:05:43 PM
Hey guys,
I'm having a little trouble with viewing the RAW footage I shoot..Everytime I hit the play button the footage plays distorted and in black and white.. is there a specific setting for this issue?

Thanks
Title: Re: Canon 700D / T5i
Post by: mk11174 on May 20, 2014, 09:35:38 PM
Quote from: jlahham on May 20, 2014, 09:05:43 PM
Hey guys,
I'm having a little trouble with viewing the RAW footage I shoot..Everytime I hit the play button the footage plays distorted and in black and white.. is there a specific setting for this issue?

Thanks
I just added the stubs for mlv_play, so maybe you need the latest nightly???

Are you recording with raw_rec or mlv_rec?

If I play it back, it by default is plays in color with mlv_play module, but you have to make sure mlv_play module is loaded of coarse.

While it plays, you can press trash button again to change the setting for mlv_play.

You are trying to play back RAW video which is not really meant for our camera so we can only expect a preview type mode, it works pretty good, but its not going to play back perfect like MOV's do.

I use the latest build and am having no issues with it on my cameras which are T5i and T2i.

The only issues you will see in the preview will be the pink dots that we get with our newer camera like the t5i, these can be removed in post but not on camera.
Title: Re: Canon 700D / T5i
Post by: jlahham on May 21, 2014, 12:01:32 AM
Quote from: mk11174 on May 20, 2014, 09:35:38 PM
I just added the stubs for mlv_play, so maybe you need the latest nightly???

Are you recording with raw_rec or mlv_rec?

If I play it back, it by default is plays in color with mlv_play module, but you have to make sure mlv_play module is loaded of coarse.

While it plays, you can press trash button again to change the setting for mlv_play.

You are trying to play back RAW video which is not really meant for our camera so we can only expect a preview type mode, it works pretty good, but its not going to play back perfect like MOV's do.

I use the latest build and am having no issues with it on my cameras which are T5i and T2i.

The only issues you will see in the preview will be the pink dots that we get with our newer camera like the t5i, these can be removed in post but not on camera.

Yea I am shooting RAW, I guess that settles it ... which reminds me, what are the advantages for shooting MLV over RAW other than the audio? Would you suggest me using MLV instead?
And where can I find the MLV workflow thread?

Many thanks
Title: Canon 700D / T5i -> Holy Grail
Post by: chriskreisel on May 21, 2014, 06:01:36 PM
Hi,
I have successfully installed a few weeks ago ML on my 700D and created already 4 Timelaps.

Now I would like to activate the Holy Grail function, but unfortunately I didn'g find this on the menu - not even under Auto Exposure....

Maybe I can help one of you?

Here are my Timelaps:
http://youtu.be/8sRTdynN0BI
http://youtu.be/UT4aBBwPuic
http://youtu.be/60VgBnaWSco
http://youtu.be/3z6qvhEAkLY



regards
Christian
Title: Re: Canon 700D / T5i
Post by: dmilligan on May 21, 2014, 06:31:36 PM
Quote from: chriskreisel on May 21, 2014, 06:01:36 PM
Now I would like to activate the Holy Grail function, but unfortunately I didn'g find this on the menu - not even under Auto Exposure....
I'm not aware of any ML features know as "Holy Grail". However, if you're trying to do a day to night timelapse (or vice versa), then start here:
http://www.magiclantern.fm/forum/index.php?topic=5705.0
Title: Re: Canon 700D / T5i
Post by: strike771377 on May 23, 2014, 09:47:17 PM
hey everyone!  first time to post here!  I have a t2i that I've been running ML on for awhile and love it!  Shoot mostly videos.  Just got two t5i in and would like ML on it.  I've read a bit of this thread but not all 18 pages! lol Is there a stable/working version for the t5i yet and if so, what do I need to do to get it?

Thanks in advance!
Title: Re: Canon 700D / T5i
Post by: strike771377 on May 24, 2014, 05:12:43 AM
ok so I got it installed on one of my cameras.  Is there a way to get the audio meters during video?
Title: Re: Canon 700D / T5i
Post by: jlahham on May 24, 2014, 05:24:46 AM
Quote from: strike771377 on May 24, 2014, 05:12:43 AM
ok so I got it installed on one of my cameras.  Is there a way to get the audio meters during video?

Load MLV rec..this will allow you to record audio and toggle the meters on and off
Title: Re: Canon 700D / T5i
Post by: strike771377 on May 24, 2014, 06:30:32 PM
Quote from: jlahham on May 24, 2014, 05:24:46 AM
Load MLV rec..this will allow you to record audio and toggle the meters on and off

Can you help me to know how to do that?  Where do I get the file from?  Where on the SD card do I put it?
Title: Re: Canon 700D / T5i
Post by: jlahham on May 24, 2014, 07:29:07 PM
Quote from: strike771377 on May 24, 2014, 06:30:32 PM
Can you help me to know how to do that?  Where do I get the file from?  Where on the SD card do I put it?

Go to Modules>load mlv_rec and mlv_snd> restart your camera and you'll notice the Audio Tab, turn it on and BOOM!!
Title: Re: Canon 700D / T5i
Post by: jetkrazee on May 31, 2014, 01:39:12 PM
I recently was performing a bracketed shot with my t5i with ML build date of 4-20-2014. I received an error of "soft limit reached" after the camera fired the first frame. Any ideas?

Thanks, jet
Title: Re: Canon 700D / T5i
Post by: a1ex on May 31, 2014, 01:44:28 PM
Yes, you can't focus past the physical limits of your lens.
Title: Re: Canon 700D / T5i
Post by: jetkrazee on May 31, 2014, 10:20:38 PM
Hmmmm, I was using a 24-105 canon L lens and focusing from macro to 100mm. Don't see how that is beyond the lens "physical limits".
Title: Re: Canon 700D / T5i
Post by: a1ex on May 31, 2014, 10:28:03 PM
Then, either your lens had a mechanical problem, or the focus command was sent too early, or it doesn't work at all, or something else.

I'm afraid you have to debug this one yourself.

FYI: http://www.chiark.greenend.org.uk/~sgtatham/bugs.html
Title: Re: Canon 700D / T5i
Post by: jetkrazee on June 01, 2014, 03:40:06 AM
I see. Thanks! :) I do thank each and every one of you that have made this software possible. It is awesome!!!
Title: Re: Canon 700D / T5i
Post by: [email protected] on June 02, 2014, 11:49:52 AM
Hello, everybody!
I'm trying to record a video in 1280 * 720, but in my settings ML does not.
There is only 16:9 - 1280 * 514
The picture has to stretch in the editor.
What am I doing wrong? Why not on the menu 16:9 -1280 * 720

Help please!
Title: Re: Canon 700D / T5i
Post by: jlahham on June 03, 2014, 03:07:09 PM
Hey Guys,
I've posted previously concerning a flashing UI issue, now that I activated MagicZoom I'm experiencing the same issue with it. When MagicZoon is on it is constantly flashing and it seems as though is flashes faster upon moving the camera around making it real hard to focus on a specific point. Any suggestions? 

Thanks,
Title: Re: Canon 700D / T5i
Post by: BASSPRO on June 07, 2014, 12:27:55 PM
Move the position of the Magic Zoom Box to the "bottom-right", that should fix it.
Title: Re: Canon 700D / T5i
Post by: jlahham on June 09, 2014, 06:51:20 AM
Quote from: BASSPRO on June 07, 2014, 12:27:55 PM
Move the position of the Magic Zoom Box to the "bottom-right", that should fix it.

Much much better..thanks for the hint.
Title: Re: Canon 700D / T5i
Post by: jlahham on June 18, 2014, 04:53:55 PM
Hey Guys,
This is not a problem report, it is simply me reporting on a shooting session that I conducted using the nightly build. I decided to take my chances and use the build on a gig I was hired to do and to my surprise I shot for over an hour and a half, interior and exterior, and no crashes or problems to report, so this is a big huzzah to all of you. One little thing though, the temperature indicator was going up and down a lot, it kept jumping up to 51 and down to 45, it didn't stop me from shooting I just thought I'd let you know.

Many thanks to all of the great work.
Title: Re: Canon 700D / T5i
Post by: jlahham on June 21, 2014, 07:46:46 AM
Hey Guys,
Going through some of the footage I shot I noticed some flickering issue with the footage where the exposure flickers high and low on some parts of the footage.. anyone else is having the same ordeal? any workaround?

Thanks
Title: Re: Canon 700D / T5i
Post by: wyrlyn on June 21, 2014, 10:00:04 AM
Hey guys!

I'm a current owner of 700D/T5i with a firmware version of 1.1.1
First quastion: Can I run the latest build (for 700D) with the 1.1.1 version or should I update to 1.1.3 before the Magic Lantern install?
The second question: What will happen if I copy the 1.1.3 files to my SD card (for Canon fw install) and after that I install the Magic Lantern ? (I mean if the 1.1.3 files will be gone because of the format req during Magic Lantern install process). I hope you understand what I mean.

Cheers!
Title: Re: Canon 700D / T5i
Post by: BASSPRO on June 21, 2014, 02:19:34 PM
Unless you can locate an older build upgrade to ver 1.1.3
Title: Re: Canon 700D / T5i
Post by: BASSPRO on June 21, 2014, 02:31:42 PM
Auto ISO is often a cause of this kind of problem so make sure you set it manually, especially if you are moving around a lot. Also, if you were shooting under fluorescent lights this to can be a pain and introduce all kinds of issues. Use manual setting wherever possible.

Quote from: jlahham on June 21, 2014, 07:46:46 AM
Hey Guys,
Going through some of the footage I shot I noticed some flickering issue with the footage where the exposure flickers high and low on some parts of the footage.. anyone else is having the same ordeal? any workaround?

Thanks
Title: Re: Canon 700D / T5i
Post by: TAB on June 26, 2014, 02:52:56 AM
Hey everybody,

For a few months I've been using the 64 notch audio module that mk11174 posted a while back. Worked great, my only gripe was having to manually transfer the module and settings folders upon updating nightly builds.

I stopped updating probably a few weeks ago, and just tried running the latest nightly (June 25).

I've found that the audio 64 module doesn't seem to work any more, I'm getting this cryptic annoying message about it, and the feature is no longer accessible.

I'm assuming that the module is no longer supported; I'm wondering if there's a workaround and / or if precise audio controls will be properly integrated into the nightly builds soon? It was a lot quicker and easier to switch between AGC and manual settings than diving into the canon menu.
Title: Re: Canon 700D / T5i
Post by: mk11174 on June 26, 2014, 05:14:52 AM
Quote from: TAB on June 26, 2014, 02:52:56 AM
I stopped updating probably a few weeks ago, and just tried running the latest nightly (June 25).

I've found that the audio 64 module doesn't seem to work any more, I'm getting this cryptic annoying message about it, and the feature is no longer accessible.

I'm assuming that the module is no longer supported; I'm wondering if there's a workaround and / or if precise audio controls will be properly integrated into the nightly builds soon? It was a lot quicker and easier to switch between AGC and manual settings than diving into the canon menu.
I recently recompiled a version just last night to get my cams up to date and also the module. Let me know if this one doesn't work for you.
https://bitbucket.org/mk11174/700d113/downloads/VOL_64_June_25_2014.zip (https://bitbucket.org/mk11174/700d113/downloads/VOL_64_June_25_2014.zip)
Title: Re: Canon 700D / T5i
Post by: TAB on June 26, 2014, 06:18:14 PM
Quote from: mk11174 on June 26, 2014, 05:14:52 AM
I recently recompiled a version just last night to get my cams up to date and also the module. Let me know if this one doesn't work for you.
https://bitbucket.org/mk11174/700d113/downloads/VOL_64_June_25_2014.zip (https://bitbucket.org/mk11174/700d113/downloads/VOL_64_June_25_2014.zip)

Now, before I get the cryptic message screen, it gives me this upon booting:

"
Camera was not shut down cleanly.STBY
Skipping module loading

"

I have no idea what it means "shut down cleanly," I always wait for the red light to stop blinking before I touch the memory card slot.

Also, I've noticed that the shutter speed for video of 1/47 now appears to be 1/45; I'm wondering if this is just an interface thing or if it's actually rolling a fraction of a second slower now?
Title: Re: Canon 700D / T5i
Post by: mk11174 on June 26, 2014, 09:32:11 PM
Quote from: TAB on June 26, 2014, 06:18:14 PM
Now, before I get the cryptic message screen, it gives me this upon booting:

"
Camera was not shut down cleanly.STBY
Skipping module loading

"

I have no idea what it means "shut down cleanly," I always wait for the red light to stop blinking before I touch the memory card slot.

Also, I've noticed that the shutter speed for video of 1/47 now appears to be 1/45; I'm wondering if this is just an interface thing or if it's actually rolling a fraction of a second slower now?
So if you are using the June 25th Nightly, your saying this Vol64 module is not working for you? Because I myself tested it with the June 25th nightly and it worked perfectly, I get no error messages?

I don't know what has changed with the shutter speeds, I have not been coding for awhile so I have not kept track of all the new changes with ML.

Maybe you need to clean your ML config file and the module config files?
Title: Re: Canon 700D / T5i
Post by: TAB on June 27, 2014, 03:07:01 AM
Quote from: mk11174 on June 26, 2014, 09:32:11 PM
So if you are using the June 25th Nightly, your saying this Vol64 module is not working for you? Because I myself tested it with the June 25th nightly and it worked perfectly, I get no error messages?

I don't know what has changed with the shutter speeds, I have not been coding for awhile so I have not kept track of all the new changes with ML.

Maybe you need to clean your ML config file and the module config files?

Yup that did it. Thanks!



Title: Re: Canon 700D / T5i
Post by: Felipe on June 27, 2014, 11:34:45 PM
Seems to me like if now, is precise I mean when just turn on the camera, the reading it gives is the reading it records, in other words no need for recording a little clip to give the right reading before to adjust volume
Title: Re: Canon 700D / T5i
Post by: wyrlyn on June 28, 2014, 10:03:42 AM
Hey there!

I've seen the ML feautre list that the 700D has got CROP_MODE_HACK function. I know what is it for (as seen on some youtube videos) but I'd like to know how to use it correctly, beacuse I haven't seen any tutorial or description of it. If someone could tell me ho to enable it and use it (settings before and after for recording) I would really appreciate it!

Thanks folks!
Title: Re: Canon 700D / T5i
Post by: wyrlyn on June 28, 2014, 08:33:44 PM
someone please? :)
Title: Re: Canon 700D / T5i
Post by: A Kubrick Fan on June 29, 2014, 03:15:01 AM
I've searched this thread for a couple of hours now. Still couldn't find the answer to my problem. I've successfully installed ML onto my 700D. But I'm having trouble fiddling with it. All I need to know is how to shoot in 1280x720 @ 60 fps and use the white balance with my grey card. For some reason, I can't choose the RAW option in ML video mode. Also, when I shoot with all the effects in ML, I can see it as I am live recording, but I can't see it in playback mode and when I download it to my computer, it doesn't have the ML effects on it. If you can point be to the right thread that has already answered this, it would be great, or if you can answer these questions, that would make my day. Thanks.

ASF
Title: Re: Canon 700D / T5i
Post by: BASSPRO on July 02, 2014, 01:36:45 PM
Full-resolution silent pictures
http://www.magiclantern.fm/forum/index.php?topic=12523

Has anyone compiled this for the 700D/T5i? It looks pretty awesome.
Title: Re: Canon 700D / T5i
Post by: ThankMeLater on July 03, 2014, 12:21:43 AM
i read the whole thread but stll did not understand what this full-resolution silent pictures will give to us  :o

Im not really into the technical aspects of our babys :D

Can you explain me the advantages and if it is also an advantage for videomode (as im only shooting videos atm)
Title: Re: Canon 700D / T5i
Post by: jan_cgn on July 10, 2014, 04:00:21 PM
I have a question about ML on my 700D:

I have a SanDisk 16 GB UHS-I 80mb/sec. that doesn't allow me to shoot in 1080. Anyway, 1280x720 is fine, but would it be possible to shoot at higher res. with an UHS II 280mb/sec. card?

Is there any way to get the display work in fullscreen, when schooting at 720? It's really annoying to have the image cropped in LV.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on July 10, 2014, 04:40:16 PM
700D supports UHS-I. But the card's card interface is limited to about 40 MByte/s.
UHS-II support is not possible.
Title: Re: Canon 700D / T5i
Post by: wyrlyn on July 14, 2014, 05:53:11 PM
Any update status on 700D (or 650D) manual audio controls process? Just like on 600D.
Thanks!
Title: Re: Canon 700D / T5i
Post by: tmcdanel on July 15, 2014, 12:40:32 AM
First i apologize because i think my answer is in the thread somewhere, but i am on a super sloooow satellite connection and could not look at every page.

I am on the verge of buying a 700D/T5i, instead of a T4i, but i use ML A Lot. The thread starts last year in June with the recommendation that it is too unstable to depend on for daily shooting and a complied download for amateurs like me was not available. (I would have to learn how to compile it.)

Is it stable enough to depend on most of the time?

Is a link available for a compiled download for Canon 700D T5i ML?
Title: Re: Canon 700D / T5i
Post by: wyrlyn on July 15, 2014, 11:00:52 AM
I use it every day since I bought the camera, and it's stable enough for me (no crash for 1 month yet).
Title: Re: Canon 700D / T5i
Post by: BASSPRO on July 15, 2014, 02:39:56 PM
I've been using ML since I acquired my T5i and I haven't had any hassles at all. Used daily on various projects.

Title: Re: Canon 700D / T5i
Post by: godashram on July 15, 2014, 06:42:28 PM
it seems stable enough for most people, myself included. you can download it from the nightly builds (700D)
Title: Re: Canon 700D / T5i
Post by: WurST1337 on July 16, 2014, 09:15:23 AM
Hey,

I have installed Magic Lantern.... It runs ... But.... If I change the settings for exampel: Focus Peak ON....in video mode...
It doesn´t work.... Nothing changed....

What can I do?
Title: Re: Canon 700D / T5i
Post by: wyrlyn on July 16, 2014, 11:03:08 AM
At first you have to activate all overlay modules (liveview included) and change the liveview to ML mode by clicking on INFO button several times.
Title: Re: Canon 700D / T5i
Post by: tmcdanel on July 16, 2014, 05:59:51 PM
There is no link to ML for T5i 700D on the download page.
http://www.magiclantern.fm/downloads.html

Can you download it compiled?
Where is the page?

If no, do you need a PC with Windows to compile it?
Title: Re: Canon 700D / T5i
Post by: godashram on July 16, 2014, 06:29:56 PM
Quote from: tmcdanel on July 16, 2014, 05:59:51 PM
There is no link to ML for T5i 700D on the download page.
http://www.magiclantern.fm/downloads.html

Can you download it compiled?
Where is the page?

If no, do you need a PC with Windows to compile it?

it's in the nightlies,  a bit lower down on the main download page.
http://builds.magiclantern.fm/#/
Title: Re: Canon 700D / T5i
Post by: jlahham on July 17, 2014, 08:33:39 PM
Hey guys,
Is there a way to record audio with RAW? I still can't resolve the pinkdots problem with MLV so I'm sticking to RAW.

Thanks
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on July 17, 2014, 08:45:42 PM
External recorder only.
Title: Re: Canon 700D / T5i - Bug?: Zoom Whilst payback
Post by: CoolBlueDog on July 19, 2014, 01:01:47 AM
Hi, I've been playing with ML (magiclantern-Nightly.2014Jul18.700D113) and have discovered that when you try and use the usual playback to review a photo and try and zoom in the zoom button zooms too full extents immediately whereas on the normal camera it zooms in 2x (or whatever the steps are) each time.

I'll keep playing with it and let you know of anything else I find.  Great job BTW.  :)
Title: Re: Canon 700D / T5i - Bug?: Zoom Whilst payback
Post by: mk11174 on July 19, 2014, 01:07:03 AM
Quote from: CoolBlueDog on July 19, 2014, 01:01:47 AM
Hi, I've been playing with ML (magiclantern-Nightly.2014Jul18.700D113) and have discovered that when you try and use the usual playback to review a photo and try and zoom in the zoom button zooms too full extents immediately whereas on the normal camera it zooms in 2x (or whatever the steps are) each time.

I'll keep playing with it and let you know of anything else I find.  Great job BTW.  :)
you just need to go to image review settings in ml menu and change it from zoom 100% to maybe fast zoom
Title: Re: Canon 700D / T5i
Post by: wyrlyn on July 19, 2014, 11:20:10 AM
Am i wrong or something? I tried to play with exp.sim ON and it should get 1/25 and 1/8000 rates in movie mode. 1/8000 works well but 1/25 doesn't seems to. Any solutions?
Title: Re: Canon 700D / T5i
Post by: krisdeak on July 19, 2014, 03:52:43 PM
Hey Guys

I only recently discovered that our dear 700D has seamless exposure compensation when using the DOF preview button.
I'm talking about the effect shown here:
https://www.youtube.com/watch?v=tdaiT5qwJec

So basically, it has the ability of jumping between f1.4 and f7.0 without any noticeable change in exposure.

My big question: do you think it's possible to achieve the same functionality while recording?
(i.e. to have an assigned button or the DOF button itself triggering stop down and working together with this seamless exposure compensation?)
I have a music video in my plans that would utilise this effect, but it's very difficult to achieve any other way...

What are your thoughts?
Title: Re: Canon 700D / T5i
Post by: jim_blind on July 21, 2014, 03:01:08 PM
Quote from: krisdeak on July 19, 2014, 03:52:43 PM
Hey Guys

I only recently discovered that our dear 700D has seamless exposure compensation when using the DOF preview button.
I'm talking about the effect shown here:
https://www.youtube.com/watch?v=tdaiT5qwJec

So basically, it has the ability of jumping between f1.4 and f7.0 without any noticeable change in exposure.

My big question: do you think it's possible to achieve the same functionality while recording?
(i.e. to have an assigned button or the DOF button itself triggering stop down and working together with this seamless exposure compensation?)
I have a music video in my plans that would utilise this effect, but it's very difficult to achieve any other way...

What are your thoughts?

As far as I know if you shoot in Av, Tv and P modes every setting will be set by camera to correct exposure. So if you are trying to soot video in Av mode and will change your aperture, camera will set sutterspeed and ISO automatically and you will not see the changes on th screen. So if you want to fully control your settings, you probably will shoot in M mode.
Title: Re: Canon 700D / T5i
Post by: krisdeak on July 22, 2014, 03:01:15 AM
Quote from: jim_blind on July 21, 2014, 03:01:08 PM
As far as I know if you shoot in Av, Tv and P modes every setting will be set by camera to correct exposure. So if you are trying to soot video in Av mode and will change your aperture, camera will set sutterspeed and ISO automatically and you will not see the changes on th screen. So if you want to fully control your settings, you probably will shoot in M mode.

OK I can see now I probably wasn't clear enough - I'm looking for an instantaneous, one-button way of quickly switching back and forth between very different apertures (such as wide open and f8) while having my exposure compensated automatically, preferably via ISO.
Just like when using the DOF button in photo mode live view.
And all of this while shooting video...

And my question is:
Is this physically possible with the 700D, if someone took the initiative to code it for ML?
Title: Re: Canon 700D / T5i - Bug?: Zoom Whilst payback
Post by: CoolBlueDog on July 23, 2014, 11:16:23 PM
Quote from: mk11174 on July 19, 2014, 01:07:03 AM
you just need to go to image review settings in ml menu and change it from zoom 100% to maybe fast zoom

Wonderful.  That resolved my issue.  There's so much new stuff in ML that I'm just finding my way through it.  Love it so far.  :-)

I'll keep using and let you know if I find anything else that seems to be weird.
Title: Re: Canon 700D / T5i
Post by: gzaloprgm on July 24, 2014, 06:27:28 AM
Quote from: krisdeak on July 22, 2014, 03:01:15 AM
OK I can see now I probably wasn't clear enough - I'm looking for an instantaneous, one-button way of quickly switching back and forth between very different apertures (such as wide open and f8) while having my exposure compensated automatically, preferably via ISO.
Just like when using the DOF button in photo mode live view.
And all of this while shooting video...

And my question is:
Is this physically possible with the 700D, if someone took the initiative to code it for ML?

Ah, so you want something like this: In M mode, you specify your correct exposure, and then while recording, you want to switch both aperture and iso simultaneously, in such a way they cancel each other and keep the exposure the same (without visual flickers).

If you keep ISO on auto, you can kinda do it, but it takes a while for the exposure to readjust. You might be able to fix it in post, but it might be very time consuming and you might encounter artifacts/clipping in the shadows and highlights.

I think it could easily be developed, if magic lantern can change those while recording, both at the same time to avoid flickers.
The main issue I think of is the lack of that many iso and aperture settings:

For instance (keeping constant shutter speed):
ISO 100 200 400 800 1600 3200
F/    1.4  2     2.8  4     5.6    8

So if you wanted a "slower fade" from one position to the other, you would end up seeing the 6 aperture settings, or a flash. More settings can probably be added by using different shutter speed each frame, but it might look weird in a video (if all of the speeds are high, maybe it can be fixed in post adding a fake motion blur)

With a manual lens with a clickless aperture ring, I think it can be done if you keep ISO auto, shoot in raw and then do some exposure compensation on each frame to remove (IIRC There are some Avisynth plugins to do auto exposure)
Title: Re: Canon 700D / T5i
Post by: a1ex on July 24, 2014, 06:50:09 AM
Try expo presets, expo lock, and gradual exposure.
Title: Re: Canon 700D / T5i
Post by: jan_cgn on July 27, 2014, 03:29:46 PM
Quote from: Walter Schulz on July 10, 2014, 04:40:16 PM
700D supports UHS-I. But the card's card interface is limited to about 40 MByte/s.
UHS-II support is not possible.

That means it doesnt make sense to get a faster card, right?
Is there any way to remove the crop mode on LV when shooting in less than 1080?
Title: Re: Canon 700D / T5i
Post by: Hieronymus on July 28, 2014, 05:59:34 PM
Hi,

I'm at the verge of buying my first Canon DSLR for video (700D) (Canon runs in the family) and would like to try magic lantern with it. So thank you for all the work!

I was wandering does the t2i audio monitoring via USB cable work for the T5i/700D?

Are the features listed in this matrix http://builds.magiclantern.fm/#/features (http://builds.magiclantern.fm/#/features) up to date with the changes mentioned in this topic?
Title: Re: Canon 700D / T5i
Post by: tmcdanel on August 01, 2014, 10:37:11 PM
I am having trouble installing ML on the 700D T5i with a Mac.
PCs apparently have neat installers but not Mac?

The please direct me to a help page or video.

Found the one in Spanish pero teno muy mal espaniol.
(Auto-correct is hell when you are trying to type bad Spanish.)

I did it the way i remember my T3i install.
- low level format of card on camera. Then stuck the card into the Mac.
- downloaded latest build from http://builds.magiclantern.fm/#/
-  Copied 700D_113.fir & autoexec.bin & ML folder to card
- started camera and clicked Trash but nada

Possible problem with boot flag?

Im not sure about this card. It is a Sandisk 32gig but it doesn't have a class# on it. I found it in my camera pack and don't even remember buying it. Card problem?
Title: Re: Canon 700D / T5i
Post by: Stedda on August 01, 2014, 11:14:54 PM
Quote from: tmcdanel on August 01, 2014, 10:37:11 PM

I did it the way i remember my T3i install.
- low level format of card on camera. Then stuck the card into the Mac.
- downloaded latest build from http://builds.magiclantern.fm/#/
-  Copied 700D_113.fir & autoexec.bin & ML folder to card
- started camera and clicked Trash but nada
You need to run the firmware update before restarting the camera and pressing the trash button...
Title: Re: Canon 700D / T5i
Post by: hwfitzjr on August 02, 2014, 05:03:37 AM
Somebodies out there are geniuses working magic for the Canon cameras.  I have a T5i (as well as the Xti and Xsi).  I can't wait to get a full version of Magic Lantern for my T5i.  I am a certified Quality Engineer and willing to do some testing.  Keep up the wonderful work and make the T5i proud to be a member of Magic Lantern.

I thought from the info on the Magic Lantern web page that only two of the major grouping were working on the T5i and they are beta.  Does the nightly builds go beyond this?  I was really referring to the audio functions of Magic Lantern for the T5i.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on August 02, 2014, 05:44:42 AM
Don't know what "full version" you're referring to.
Use nightly build instead.
Title: Re: Canon 700D / T5i
Post by: koollife on August 02, 2014, 09:33:22 AM
Has anyone find solution for headphone monitoring? on T5i? ... this function is killing me, i need to monitor the sound that comes in through headphone. i'm working like a blind man during shooting i cannot monitor my incoming sound.
Title: Re: Canon 700D / T5i
Post by: wyrlyn on August 02, 2014, 04:04:00 PM
It's technically possible as I heard so I hope someone is working on it. If so please let us know! I also wait for that.
Title: Re: Canon 700D / T5i
Post by: tmcdanel on August 02, 2014, 08:59:21 PM
Koollife: "Has anyone find solution for headphone monitoring? on T5i? ... this function is killing me, i need to monitor the sound that comes in through headphone. i'm working like a blind man during shooting i cannot monitor my incoming sound."

I solved the problem in a ridiculously expensive way with a JuicedLink Riggy-Assist RA333. I needed something i could set and let inexperienced students run, with little post-editing. But the cheaper and more traditional approach is capture the sound separately with a digital recorder, then sync post-editing.
Title: Re: Canon 700D / T5i
Post by: Felipe on August 02, 2014, 09:04:37 PM
Quote from: tmcdanel on August 02, 2014, 08:59:21 PM
ridiculously expensive way with a JuicedLink Riggy-Assist RA333.

Good Preamps cost money and that is a hardware topic
Title: Re: Canon 700D / T5i
Post by: koollife on August 04, 2014, 10:23:25 AM
Thanks for your help Bro, But all we need is Full support like T3i, have been waiting for years for the option. i will  be stupid of my buying 60D and T3i because of common update. please Magic lantern Guru , you made us taste this software , kindly help us with this update.... i'm ready to make donations if money is the issues
Title: Re: Canon 700D / T5i
Post by: godashram on August 05, 2014, 07:08:39 PM
Quote from: koollife on August 02, 2014, 09:33:22 AM
Has anyone find solution for headphone monitoring? on T5i? ... this function is killing me, i need to monitor the sound that comes in through headphone. i'm working like a blind man during shooting i cannot monitor my incoming sound.

I solved this problem by just picking up a tascam dr-60d ($200 at B&H right now) i can feed audio into the camera, record up to 4 channels at the same time (2 xlr, l/r on a 1/4 plug) as well as record audio on the dr-60d directly. Monitoring on camera would be great, BUT even passing clean audio into the camera, the dr-60d recordings sound soooo much better. the ONLY downside so far is it's size...
Title: Re: Canon 700D / T5i
Post by: tmcdanel on August 06, 2014, 08:03:13 PM
First, i should explain that i currently have both a T5i, which i am trying to get used to, and a T3i.

I cannot find the switch to show the sound meter during video recording in either one. I used to have the sound meter showing in the T3i but i some how turned it off so it does not show. Is it an ML feature or part of the standard Canon firmware?

2. ML for T3i has Audio as the first submenu tab, but there is no ML Audio tab for T5i?  Simply not that complete yet?

3. I don't see a headphone jack on either T3i nor T5i, but ML for T3i has headphone volume. How do you plug in a headphone to both?
Title: Re: Canon 700D / T5i
Post by: tmcdanel on August 06, 2014, 08:15:53 PM
Before i post a question, i check both the ML documentation (which is slow because my internet connection is slow and the Canon manual PDFs, and i Google it, but i usually feel like i am asking a newbie questions that others have already answered.

Wouldn't it be better to have a separate forum section for each Canon model/ML version?

This thread is reeeeally long.
Title: Re: Canon 700D / T5i
Post by: jlahham on August 07, 2014, 04:18:34 AM
Quote from: tmcdanel on August 06, 2014, 08:15:53 PM
Before i post a question, i check both the ML documentation (which is slow because my internet connection is slow and the Canon manual PDFs, and i Google it, but i usually feel like i am asking a newbie questions that others have already answered.

Wouldn't it be better to have a separate forum section for each Canon model/ML version?

This thread is reeeeally long.

Under Modules turn the mlv_rec and mlv_snd on, then restart your cam and the Mic tab will be right there for you. Hope this helps
Title: Re: Canon 700D / T5i
Post by: Malio94 on August 09, 2014, 01:26:45 AM
Hi guys, I'm sure this has been asked before, but is there a way to adjust audio levels while recording? (Specifically with the t5i) I love that levels were added onto the main ML screen, but it would be so awesome to get that extra bit of control.
Title: Re: Canon 700D / T5i
Post by: Felipe on August 09, 2014, 04:35:44 AM
Quote from: Malio94 on August 09, 2014, 01:26:45 AM
Hi guys, I'm sure this has been asked before, but is there a way to adjust audio levels while recording? (Specifically with the t5i) I love that levels were added onto the main ML screen, but it would be so awesome to get that extra bit of control.

Install volume module , https://bitbucket.org/mk11174/700d113/downloads/Aug_01_2014_vol_64.zip
Then while you record go to ML Menu and adjust volume
Title: Re: Canon 700D / T5i
Post by: Malio94 on August 09, 2014, 10:45:56 PM
Quote from: Felipe on August 09, 2014, 04:35:44 AM
Install volume module , https://bitbucket.org/mk11174/700d113/downloads/Aug_01_2014_vol_64.zip
Then while you record go to ML Menu and adjust volume

Damn dude thank you so much!
Title: Re: Canon 700D / T5i
Post by: Felipe on August 10, 2014, 03:32:37 PM
Quote from: Malio94 on August 09, 2014, 10:45:56 PM
Damn dude thank you so much!
Glad to help
Title: Re: Canon 700D / T5i
Post by: wyrlyn on August 12, 2014, 11:42:33 AM
when I record video in global draw mode the time indicator keeps flickering and I can't see the elapsed time. Is there a fix for that?
Title: Re: Canon 700D / T5i
Post by: mk11174 on August 12, 2014, 02:33:55 PM
Quote from: wyrlyn on August 12, 2014, 11:42:33 AM
when I record video in global draw mode the time indicator keeps flickering and I can't see the elapsed time. Is there a fix for that?
What build are you using of ML and are you recording a regular Canon MOV or using RAW_REC or MLV_REC? If so, what canon mode are you in as far as Resolution and FrameRate and what settings are you using exactly in the module. We def need more info so we can test on our cams to see whats going on.
Title: Re: Canon 700D / T5i
Post by: wyrlyn on August 12, 2014, 07:16:13 PM
700D 2014 July 17 build with full-res sp.
Recording regular mov (mlv/raw shows fine) global draw liveview activated (and that's what i'm in), but nothing else turned on (focus peak off, etc.)
1920x1080 24 fps
Movie tweaks: time indicator (elapsed time turned on), that is what the flickering caused. the elapsed time appear for 1-2 sec on the top right corner than suddenly disappear, than after 1-2 sec it shows again. It's kinda annoying for me.
Title: Re: Canon 700D / T5i
Post by: mk11174 on August 12, 2014, 10:22:36 PM
Quote from: wyrlyn on August 12, 2014, 07:16:13 PM
700D 2014 July 17 build with full-res sp.
Recording regular mov (mlv/raw shows fine) global draw liveview activated (and that's what i'm in), but nothing else turned on (focus peak off, etc.)
1920x1080 24 fps
Movie tweaks: time indicator (elapsed time turned on), that is what the flickering caused. the elapsed time appear for 1-2 sec on the top right corner than suddenly disappear, than after 1-2 sec it shows again. It's kinda annoying for me.
Ok, that has something to do with our fps, right from the start with this cam even before updating the new port our fps fluctuates, and the redraw in that corner causes this to happen with your elapsed time.

Go ahead and turn the tweak to off and watch your frame rate jump around from 23.973 to 23.983 it does it randomly and was one thing never solved on this camera.
Title: Re: Canon 700D / T5i
Post by: wyrlyn on August 13, 2014, 09:14:18 AM
i turned the tweak off and the frame jump really pops up. fixing that somehow (locking?) might be solve the problem.
Title: Re: Canon 700D / T5i
Post by: Felipe on August 13, 2014, 02:04:21 PM
Quote from: mk11174 on August 12, 2014, 10:22:36 PM
Ok, that has something to do with our fps, right from the start with this cam even before updating the new port our fps fluctuates, and the redraw in that corner causes this to happen with your elapsed time.

Go ahead and turn the tweak to off and watch your frame rate jump around from 23.973 to 23.983 it does it randomly and was one thing never solved on this camera.

If not possible to fix the jump, Personally find more useful, The elapsed time than the frame rate, that any way , is one of the first decisions when start recording
Title: Re: Canon 700D / T5i
Post by: jlahham on August 16, 2014, 08:44:32 AM
Hey guys,
I have ML installed on two different identical SD cards with the same settings on both, they both worked well, but lately one of the two cards started acting up by displaying the counter on the upper right corner in RED while recording which is abnormal. When I switched back to the other card the counter was green as expected. Any input?

Thanks,

Followup:
In efforts of tracking the problem down I kept messing around with settings and now the counter change colors to yellow and red back and forth
Title: Re: Canon 700D / T5i
Post by: ndlhoko on August 19, 2014, 08:20:12 PM
Hi guys i just installed ML on my new 700d, but getting a messsage saying sound disabled when i record raw and mlv. any help???? :(
Title: Re: Canon 700D / T5i
Post by: cybermarmotte on August 19, 2014, 09:36:00 PM
Installation went fine, arkanoid working, but I saw on a friends camera the mic volume live, how can I check this?!
Title: Re: Canon 700D / T5i
Post by: cybermarmotte on August 21, 2014, 04:34:07 PM
Thanks to ML, i was able to did this last evening:

Next time I should fix the exposure and try to visualize the HD format, I had to crop it and the picture aren't well positionned.
Title: Re: Canon 700D / T5i
Post by: wyrlyn on August 21, 2014, 05:34:24 PM
good one, but that's the problem with av mode. next time you should use ettr and a decent deflicker, like newblue flash remover pro. ;)
Title: Re: Canon 700D / T5i
Post by: jlahham on August 25, 2014, 06:14:37 AM
Hey guys,
Any idea why the time indicator in the upper right corner is turning red and yellow? Also, I'm dealing with a red "skipped1" message before the camera stops recording any clue why that happens?

Thank you.
Title: Re: Canon 700D / T5i
Post by: koollife on August 31, 2014, 05:38:37 AM
Hello Guys When Magic Lantern will enable Headphone support for T5i and T4i ? i cannot wait for the update... is there any Tip and trick Guys? any addon to get the feature work?
Title: Re: Canon 700D / T5i
Post by: stupendousman_dk on August 31, 2014, 12:12:30 PM
Hi,

I am really happy with the current build, have been using it for more than a week now.
Though there is one thing i am having a little trouble figuering out - the FPS override.

So want to get a subtle slow motion effect - but it seems i can't find a setting that makes this happen.

I for instance set the override to Exact FPS and 48 FPS. But it seems i can't see any difference. I know the container will have the same FPS as the camera dictates (24, or 25 PAL) but when i re-time the clip it doesn't seem there is more frames than normal.

Hints please? :-)
Title: Re: Canon 700D / T5i
Post by: batista16 on September 03, 2014, 10:54:45 PM
Hi, Does your play mode shortcuts work?
I'm testing SET+MainDial and it just skips 10 pictures (by canon original feature),
Also, is it possible to enable ML Overlays in Play Mode? like zebras for example.
Title: Re: Canon 700D / T5i
Post by: a1ex on September 04, 2014, 02:35:23 PM
To diagnose this, print the result of is_pure_play_photo_mode(). It should return 1 if you are viewing a picture, and 0 if you are viewing a movie, or if you are not in playback mode.

You may also check this stub: PlayMain_handler. If in doubt, print the return value of get_current_dialog_handler().

Title: Re: Canon 700D / T5i
Post by: koollife on September 06, 2014, 01:38:00 PM
To the Experts in the house, is there any feature update for Canon T5i and T4i concerning Headphone Monitor features.
The monitor indicator is working but how about the headphone monitor?
Title: Re: Canon 700D / T5i
Post by: wyrlyn on September 06, 2014, 03:01:12 PM
I would also ask the same, let us know is someone is working on it please.
Title: Re: Canon 700D / T5i
Post by: mk11174 on September 06, 2014, 08:50:13 PM
Photo
dialog = ff3b9db0
pure_play  = 1

Movie
dialog = ff54721c
pure_play = 0

Live View
dialog = ff5330d8
pure_play = 0
Title: Re: Canon 700D / T5i
Post by: Felipe on September 07, 2014, 02:42:03 AM
mk11174, Does it mean you have a new module for headphone monitoring ?
Title: Re: Canon 700D / T5i
Post by: mk11174 on September 07, 2014, 02:51:22 AM
No, I was replying to alex for the print of pure_play
Title: Re: Canon 700D / T5i
Post by: Felipe on September 07, 2014, 04:17:02 AM
Interesting
Title: Re: Canon 700D / T5i
Post by: mk11174 on September 07, 2014, 04:42:13 AM
Yeah, basically just letting him know it diagnosed fine for the play mode for photos and movie files, nothing about audio.

Title: Re: Canon 700D / T5i
Post by: a1ex on September 07, 2014, 09:12:58 AM
Looks correct. Can you show a video of the problem?
Title: Re: Canon 700D / T5i
Post by: bend53 on September 09, 2014, 02:00:17 AM
I too am shooting video with a 700D/ t5i. I would very much like to display the shooting date and time in the output video. Any help with this?
Title: Re: Canon 700D / T5i
Post by: oscaraxen on September 11, 2014, 10:35:19 AM
Hey guys

When I try to unzip the latest nightly build I get the following errors in WinRar:

!   C:\Users\Oscar\Desktop\rebuilt.rebuilt.magiclantern-Nightly.2014Aug20.700D113 (1).zip: Checksum error in C:\Users\Oscar\Desktop\ml\autoexec.bin. The file is corrupt

!   C:\Users\Oscar\Desktop\rebuilt.rebuilt.magiclantern-Nightly.2014Aug20.700D113 (1).zip: The archive is corrupt

I have tried repairing the archive but it doesn't help. Does anyone know what could be the problem?

Thank you!
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on September 11, 2014, 11:07:24 AM
Delete downloaded file and download it again.
Title: Re: Canon 700D / T5i
Post by: oscaraxen on September 11, 2014, 02:12:14 PM
I tried that before, but as I tried it again today I think I've recognized the problem. The file size is about 1600kb but it  completes the download after just around 1000kb is finished. This might be OT but I'm using a pretty shitty internet (currently in Indonesia), might that what's causing the download to finish prematurely?

Thank you
Title: Re: Canon 700D / T5i
Post by: Kimani on September 19, 2014, 12:56:34 AM
I was able to get Magic Lantern on my 700D. When i start to record, it automatically stops recording after 4secs. I have a class 10 Transcend 16GB card. Is there something im doing wrong?
Title: Re: Canon 700D / T5i
Post by: walter_schulz on September 19, 2014, 06:39:55 AM
Debug tab -> Benchmarks -> Card R/W benchmark (5 min)
Title: Re: Canon 700D / T5i
Post by: jlahham on September 21, 2014, 02:20:29 AM
Hey Dev team,
Can ML trigger an audio recording session on an external recorder? I still use my Zoom H2n for audio cause I still have a pink dot issue with MLV, so I choose to shoot RAW and record audio externally which ends up being a bit of a hassle to sync, so I thought maybe when connected to the camera ML can trigger and stop the recording session?
Is that possible?

Thanks
Title: Re: Canon 700D / T5i
Post by: PBearBacon on September 24, 2014, 02:36:22 AM
Hey guys, how come the builds page isn't loading?
Title: Re: Canon 700D / T5i
Post by: Stedda on September 24, 2014, 01:32:26 PM
QuoteHey guys, how come the builds page isn't loading?

http://www.magiclantern.fm/forum/index.php?topic=11835.0
Title: Re: Canon 700D / T5i
Post by: kluvlaw on September 28, 2014, 08:03:48 PM
Total newb.  Just found this site yesterday.  Very excited about what I've read of magic lantern so far.

The ML nightly build install for the t5i seems pretty straight forward but I do not want to brick my camera.

I updated to 1.1.3 yesterday.  Downloaded newest nightly build.  Unzipped the .fir file to my camera formatted 64GB sd card.

So now do I also need to unzip the ML folder to the sd card too?  And then go through the same steps I did to install 1.1.3?  Lastly, there is also an autoexec.bin file that downloaded with the NB.  Is that file also unzipped to the sd card?

Sorry if these are dumb questions.  I REALLY want to do this right.  Thanks.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on September 28, 2014, 08:05:02 PM
Installation is described in first post.
Title: Re: Canon 700D / T5i
Post by: kluvlaw on September 28, 2014, 08:21:53 PM
Sure, but the info is pretty basic and there is nothing that references the .bin file...so I assume I don't copy it to the sd card?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on September 28, 2014, 08:25:23 PM
Sure. First post says to copy files to card and your conclusion is not to copy files.
Logical in its way ...
Extract files and copy *ALL* files to card.
Title: Re: Canon 700D / T5i
Post by: kluvlaw on September 28, 2014, 08:36:11 PM
It's not in the ML folder.  The instructions say to copy the "ML files."  Imo that leaves reason for doubt, so I asked since I don't want to brick my dang camera.  Thanks side helping of snark.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on September 28, 2014, 08:39:00 PM
It doesn't say "copy ML folder". ML consists of AUTOEXEC.BIN (= most of ML) + a directory named ML + enabler for cam's bootflag (optional, named *.FIR).
Title: Re: Canon 700D / T5i
Post by: jlahham on October 05, 2014, 05:31:35 PM
Hey Dev team,
Can ML trigger an audio recording session on an external recorder? I still use my Zoom H2n for audio cause I still have a pink dot issue with MLV, so I choose to shoot RAW and record audio externally which ends up being a bit of a hassle to sync, so I thought maybe when connected to the camera ML can trigger and stop the recording session?
Is that possible?

Thanks
Title: Re: Canon 700D / T5i
Post by: TAB on October 07, 2014, 10:07:05 PM
Where can I find v6 of the VOL_64 module?

I've just updated from an old nightly build (July22) to the most recent one, and the Volume 64 module won't load. The error message says that the module is version 5, and ML expects v6.

Title: Re: Canon 700D / T5i
Post by: Felipe on October 07, 2014, 10:18:01 PM
Here :
https://bitbucket.org/mk11174/700d113/downloads/
Title: Re: Canon 700D / T5i
Post by: TAB on October 07, 2014, 10:47:15 PM
Thanks!
Title: Re: Canon 700D / T5i
Post by: koollife on October 08, 2014, 11:05:09 AM
Hello friends. Anyone have an idea when the 700D Audio monitoring will be updated. i need the audio monitoring to monitor my sound on T5i and a solution for the Noise during recording.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on October 08, 2014, 12:41:23 PM
"When" -> Top of page -> User Guide -> FAQ -> Last one
Title: Re: Canon 700D / T5i
Post by: starley on October 08, 2014, 07:59:33 PM
Hello, I am working with two 700d cameras for record wedding and we are very interested in some options that magic lantern can give us. Principally, the peak, the vumeters and the middle step of ISO. We installed the magic lantern nightly.2014sept12.700d.113. And it works decently in the first look. But it is very important to know if i can trust in the stability of this version in a wedding recording we can´t have a fail with the camera, it could be very bad for our work. I would like that someone could respond about the question if i can use this version of magic for this three options or maybe another more stable version or at this time is not recommended use any versión for fieldwork.

Thanks to all and specially to the developers for this great work.

I´m sorry for my poor english
Title: Re: Canon 700D / T5i
Post by: Felipe on October 08, 2014, 08:02:46 PM
NO PROBLEM USE A FAST AND RELIABLE CARD, AND IF YOU INCRESE BIT RATE FOR LONG INTERVIEWS DON'T GO VER 1.6, FOR SHOTS LESS THAN 5 MINUTES 1.8
Also the card should be 32 or 64 gigs since high bit rate takes much more space
Title: Re: Canon 700D / T5i
Post by: TAB on October 09, 2014, 07:59:33 AM
Quote from: starley on October 08, 2014, 07:59:33 PM
Hello, I am working with two 700d cameras for record wedding and we are very interested in some options that magic lantern can give us. Principally, the peak, the vumeters and the middle step of ISO. We installed the magic lantern nightly.2014sept12.700d.113. And it works decently in the first look. But it is very important to know if i can trust in the stability of this version in a wedding recording we can´t have a fail with the camera, it could be very bad for our work. I would like that someone could respond about the question if i can use this version of magic for this three options or maybe another more stable version or at this time is not recommended use any versión for fieldwork.

Thanks to all and specially to the developers for this great work.

I´m sorry for my poor english

I have never had any stability problems with using ML on the job. I've encountered some glitches while updating firmware and messing with modules, but nothing that has ever compromised my work. Just be diligent with updating to the latest version, and if you're playing with unfamiliar features, always be sure to test it out before it's an important shot.

Seeing that you have two cameras, you might want to try shooting with ML on only one of them. Also, keep in mind, because ML is only installed on the SD card, you could have an extra card without ML, in case you wanted to use just the Canon menu. But make sure that the blank card is NOT formatted for DSLR booting (if you format the card on a computer with Macboot/Eoscard and then delete the ML files, the camera will still try to boot the card, but there's no ML to boot, so the camera will basically be a brick until you pull the battery and use another memory card).

Good luck!
Title: Re: Canon 700D / T5i
Post by: starley on October 09, 2014, 09:13:26 PM
thank you very much tabb. The possibility that you have said is very likely to eventually do so. What cards you say I have a question. We usually use two 32 GB sd card for camera and wedding. Are we at a low level format both, install magic lantern on each, and update the firmware once per card? Does the configuration of the magic is stored on each card? Can I add and remove one or the other without problem? Thank you very much again.
Title: Re: Canon 700D / T5i
Post by: Felipe on October 10, 2014, 06:25:24 AM
Install ML in each one, yes same configuration on each card, if that is what you want, if you configure different will have different configurations.
Yes you can insert or remove either one.
Title: Re: Canon 700D / T5i
Post by: starley on October 10, 2014, 12:39:11 PM
Muchas gracias Felipe. I just install ML in my 3 sd cards and in the camera and it works right. Finally we will go with the two 700d cameras with magic lantern nightly build from 12 of september. We only will use vu meters, peak, zebra and middle pass of ISO, in the install says that it is not recomended for work... I hope don´t meet us with any problem... anyway i will go with my canon xha1 too. DO is recomended use ml in field work with a nightbuild? Or maybe the risk is too high? How i could unistall the ML? Thanx so much
Title: Re: Canon 700D / T5i
Post by: Felipe on October 10, 2014, 02:37:03 PM
Personally find better slightly sharper function than focus peaking, don't know about uninstall have never consider making video without ML.
Absolutly reliable, as I told you I never use MLV or RAW , only bit rate increasing, because of the work flow.
What do you mean by middle pass of ISO, If you have Dynamic range problems you should use Neutral style with contrast all the way down, or Marvels 3.4.
Also use the Mosaic engineering Moire filter is very very important these camera will make a disco party on dresses with lines as well as ties with lines
and certain fabrics.
Title: Re: Canon 700D / T5i
Post by: starley on October 10, 2014, 05:24:11 PM
Thanks of new Felipe your help it is great. yes, for the dynamic range we use neutro with -4 -3 -2 settings, and yes too i meet better the slightly sharper. About iso i refer to 640, 1250 and 2500 iso it is very good for me, it reduces the noise of gain in more steps. Sometimes for example I can use 1250 better than 1600, with a less video noise for the take. about cbr settings at the moment I quit this option and I let that the original firmware make the job. What cbr do you use? 1.3X? Do you make it works well in long takes with the sound? What kind of sd cards do you use for increase the cbr? Do is the increase of CBR very good? I am from spain, but I suppose that we can not talk in spanish in this forum. Thanks so much
Title: Re: Canon 700D / T5i
Post by: Felipe on October 10, 2014, 07:21:54 PM
Yes constant bit rate is great I go up 1.9 without any fear, however for long recordings usually go to 1.6.
I use 2 cards, Delkin devices class 10 read 90 write 45, and the Panasonic Gold class 10 read 90 write 45.
Never a problem with them
Title: Re: Canon 700D / T5i
Post by: koollife on October 11, 2014, 07:42:55 AM
Dear Programmers,

Please kindly save our ass from Canon T5i Audio headphone monitor and the Noise.... the noise is killing my film production. i like recording from camera source than external record devices because this make editing easy...

Please Help us if this gonna take a Donation i do not mind donating for this option for 700D

Regards
Title: Re: Canon 700D / T5i
Post by: wyrlyn on October 11, 2014, 06:47:03 PM
I am also looking foward to the 700D audio features, nothing update since I requested.. so sad
Title: Re: Canon 700D / T5i
Post by: starley on October 13, 2014, 08:02:40 PM
It´s very insteresting Felipe, what you said about cbr, but maybe it is not very funtional for weddings because we record a lot, another question it is use it for short films or another kind of short videos. Do you work with 1.9x in long record works? Thanx so much
Title: Re: Canon 700D / T5i
Post by: Felipe on October 13, 2014, 09:03:04 PM
Yes to 1.9 , under the worst conditions, I mean Scenes with a lot of information or very high iso ( 3200 ).
It can go higher but I decided, that 1.9 is where never stops recording, so I use it there 90% of the time
As I said before for long interviews I mean like 30 minutes or so , I go 1,6-1,5
At the end the higher the better for detail, noise, and in particular for color correction , or keying in post
About 60 % of this shots were made using ML
Watch it in HD

Title: Re: Canon 700D / T5i
Post by: starley on October 14, 2014, 01:40:36 PM
Good takes Felipe. Maybe we will use it in some works, maybe in weddings has a out of control risk, Another think that it is very important for me it is the sound. Do you know when don´t work fine the sound with the cbr increase? Working in the wedding we meet two possible bugs the last saturday. An error report about lens, and when I connect the camera for transfer the files to computer, it works fine, but when i finish and set off the camera, the next time that I put it on, magic says me that camera don´t shut down right and i must to wait to charge the files a few seconds. Another thing that we meet is that when temperature is high 55ºC or 60ºC, the record symbol and the vu meters don´t works fine, sometimes it doesn't appears.
Someone knows is the most stable version of magic lantern for 700D?
Thanks so much
Title: Re: Canon 700D / T5i
Post by: Felipe on October 14, 2014, 04:34:43 PM
what card are you using , class ten but what read and write ?
I don't know what are you doing wrong , I have events and weddings I have done without any problem
did you install the audio module ?

https://bitbucket.org/mk11174/700d113/downloads/
Title: Re: Canon 700D / T5i
Post by: VictorVic on October 17, 2014, 04:01:11 AM
I need MAJOR help.  I am trying to learn about my t5i audio set up.  I can't see any audio levels and when i connect headphones, the lcd does not even turn on.  Please, by the grace of God, help me with this issue, even if it isn't new to you, for me its like the first time i learned about the differences about men and women. Please help me though this and thank you in advance.  Kindly V
Title: Re: Canon 700D / T5i
Post by: godashram on October 17, 2014, 08:59:43 PM
Quote from: VictorVic on October 17, 2014, 04:01:11 AM
I need MAJOR help.  I am trying to learn about my t5i audio set up.  I can't see any audio levels and when i connect headphones, the lcd does not even turn on.  Please, by the grace of God, help me with this issue, even if it isn't new to you, for me its like the first time i learned about the differences about men and women. Please help me though this and thank you in advance.  Kindly V

to my knowledge, we DO NOT have headphone monitoring yet. As a matter of fact, there is no where to plug in headphones. The only available spot is the mic in jack, and well, that's an input only. Now i could be wrong an missed something in the past month, but to my knowledge, that's about it.
Title: Re: Canon 700D / T5i
Post by: VictorVic on October 17, 2014, 11:15:35 PM
So does this mean I need to purchase an external LCD monitor that allows me to plug in headphones and monitor sound?  If so, do you have any recomednations for which external monitor to use for a humble budget? Thank youu
Title: Re: Canon 700D / T5i
Post by: Felipe on October 18, 2014, 01:41:45 AM
buy an audio box, the Tascam DR60 Mark II , goes for only us $ 200, another choice could be the Juicedlink Riggy assit for us $ 460
Title: Re: Canon 700D / T5i
Post by: VictorVic on October 18, 2014, 02:44:35 AM
Is it possible to use headphones with an h4n? While having an external mic connected to the h4n? Thanksss again
Title: Re: Canon 700D / T5i
Post by: Felipe on October 18, 2014, 02:59:59 AM
YES, however zoom H5 is much better
Title: Re: Canon 700D / T5i
Post by: godashram on October 21, 2014, 12:12:29 AM
I use the original tascam dr-60d. zero issues so far AS well as with my headphones, i already know how loud audio gets recorded at by looking at the meters....so when I am in a rush, i don't have to fiddle with my headphones.
Title: Re: Canon 700D / T5i
Post by: a.malinkin on October 29, 2014, 07:57:54 PM
Hi
On my 700D the focus while taking videos is too slow, sometimes it misses a lot, so it has to wait for about 4 seconds, but sometimes it's fine. Is there an option in ML to change the algorithm of autofocus function or its reaction while taking videos?
(In Canon 100D this problem seems solved better and I can still change the camera, but I prefer 700D)
Tnank you
Title: Re: Canon 700D / T5i
Post by: claudelec on October 30, 2014, 04:45:36 PM
Hi,
This autofocus problem has been solved on 70d with the new double pixel sensor
Title: Re: Canon 700D / T5i
Post by: Dr_Calculus on November 02, 2014, 06:29:38 PM
Hi,

I've recently installed ML on my 700D and I'm really loving it, but I can't seem to get the Follow Focus or Rack Focus features to work. I've got autofocus on as per the instructions but when I turn on follow focus the arrow keys do nothing but the camera autofocus still kicks in. It's similar for Rack Focus - I set the end point then start the Rack Focus feature but pressing the Set or Play key does nothing.

This is a new camera for me so I'm probably doing something stupid - any advice gratefully received.

I'm using firmware 1.1.3 with the nightly build from 7 October 2014.

Thanks.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on November 02, 2014, 06:39:15 PM
Just to make sure: You're in Liveview?
Title: Re: Canon 700D / T5i
Post by: Dr_Calculus on November 02, 2014, 09:10:23 PM
Sorry, yes, I am in Liveview. The LV display looks like it is working e.g. in Follow Focus FF+ and FF- appear on the display. Do these functions override the Canon autofocus or do I need to disable it in some way?
Title: Re: Canon 700D / T5i
Post by: Dr_Calculus on November 02, 2014, 09:34:11 PM
Solved it - I needed to turn off Movie Servo AF in the Canon menu!
Title: Re: Canon 700D / T5i
Post by: DigitalVeil on November 03, 2014, 05:45:07 PM
Quote from: a.malinkin on October 29, 2014, 07:57:54 PM
Hi
On my 700D the focus while taking videos is too slow, sometimes it misses a lot, so it has to wait for about 4 seconds, but sometimes it's fine. Is there an option in ML to change the algorithm of autofocus function or its reaction while taking videos?
(In Canon 100D this problem seems solved better and I can still change the camera, but I prefer 700D)
Tnank you

I don't think so, and even if there was, that wouldn't help, given that the 700D in video mode can only focus by contrast detection which is slow and inaccurate by nature (software cant change that).  If you need good video AF, either the 70D or mirrorless is really the only way to go because they use phase detection.  Your best bet with the 700D is to just manually pull focus  ;D
Title: Re: Canon 700D / T5i
Post by: ronkad on November 18, 2014, 11:43:25 AM
First of all thank you for creating this great software. It's really amazing and I really appreciate your work.

I have a question regarding audio monitor. As far as I understand it's not currently available on 700D/T5i?

So connecting with this connector like this (I believe it's 650D/T4i) won't work?
(http://www.igokab.pl/foto/31E81E2E-BD1C-4592-9DDE-A98D4870C984.JPEG)
(https://dl.dropboxusercontent.com/u/62913922/ml-odsluch.jpg)


Will it be possible any time soon? Or it's hard to say or maybe it will never be available?


I've read there's no significant difference between 650D/T4i and 700D/T5i so I dont understand what causes the problems with adding this extremely useful feature to 700D/T5i. Or only technical parameters didn't change much while software was completely rebuilt?
Title: Re: Canon 700D / T5i
Post by: walter_schulz on November 18, 2014, 12:32:22 PM
Quote from: ronkad on November 18, 2014, 11:43:25 AM
I've read there's no significant difference between 650D/T4i and 700D/T5i so I dont understand what causes the problems with adding this extremely useful feature to 700D/T5i. Or only technical parameters didn't change much while software was completely rebuilt?

Top of page -> User Guide -> FAQ -> Troll questions section
Title: Re: Canon 700D / T5i
Post by: ronkad on November 18, 2014, 01:42:00 PM
Thank you walter_schulz for your response. I found on Features list (http://builds.magiclantern.fm/#/features) that HEADPHONE_MONITORING is not available for 650D as well yet on HEADPHONE_MONITORING specification (http://wiki.magiclantern.fm/userguide#headphone_monitoring) I found that the feature is not available on 600D/T3i also.

I'm thinking about buying first entry-level Canon camera and I understand there's no other way than waiting for HEADPHONE_MONITORING support by Magic Lantern to have live audio preview without attached monitor correct?
Title: Re: Canon 700D / T5i
Post by: JamesSteele on November 20, 2014, 10:26:42 AM
I apologize if this isn't the proper place to post this.  I'm posting it in "camera specific" because it might be something specific to certain cameras.  I recently purchased the T5i and installed ML on it and was of course thrilled with all the features it brings.  But I did notice that the camera seemed to run warmer with ML.  I was shooting video for a while with it before installing ML, then installed ML and shot more video.  When I first starting using ML the sensor temp was 39 deg. C.   But within minutes it was up to 47-48 and then hit 50 deg. C and the temp number appeared in a yellow "caution" box.  This made me a bit concerned.  I spoke to a professional I know here locally who has a 60D and said he has no problems, but he thinks it could vary from model to model.  Hence I'm asking about this in "camera specific" discussion.

A couple of questions for those with T5i's:

1) Is this normal?

2) Does anybody know normal safe operating temperature range for the sensor?

3) Is bypassing ML on boot by holding the Set button *exactly* like not having ML installed at all?  Should temperature stay the same as when running it pure Canon firmware mode with no boot flag, etc.?

Thanks for helping with the newbie question and for your patience if this post isn't appropriate for this topic.

Title: Re: Canon 700D / T5i
Post by: walter_schulz on November 20, 2014, 11:11:01 AM
You may help escho by providing some numbers:
http://www.magiclantern.fm/forum/index.php?topic=9673.0
I suppose you hit the 600/650 problem: It might be possible ML and Canon are using different methods/sensors to determine temperature.

3: No, there is a difference but a small one.
Title: Re: Canon 700D / T5i
Post by: TmProd on November 28, 2014, 08:30:59 PM
QuoteThe shortcuts for ISO and KEL are still there, just go into Pref menu in ML and go into Misc key settings and turn on LCD Sensor Shorcuts, also, check Arrow/Set shortcuts menu in Pref menu and set the shortcuts how you would like them.

Then you can use the Face Sensor above the viewfinder to activate them and switch through them.

You will also need to have LCD auto off Enabled in Canon menu to use the sensor feature.


Everything works in camera only but with an external monitor thru hdmi... this option doesn't seems to works ???

Any ideas ?

Thanks
Title: Canon 700D / T5i
Post by: joseba.iriarte on November 30, 2014, 06:31:33 PM
Hello.

I have tried magiclantern-Nightly.2014Oct07.700D113 on my 700d. I installed it by following the instructions, and it worked. But since then i can't enter liveview mode. I press liveview mode and nothing happens. Then I uninstalled ml following the instructions again. In uninstalled well, camara working, bat liveview mode does not. Then I tried by installing again canon's firmware 1.1.3 but can´t enter liveview mode.

What can I do? Please help me, I'm very worried.

Thank you very much.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on November 30, 2014, 06:41:27 PM
Does the button work in movie mode?

Reset all menu settings to factory defaults (including Fn) and try again.
Title: Re: Canon 700D / T5i
Post by: joseba.iriarte on November 30, 2014, 07:40:52 PM
It works now! Maybe I had liveview disabled in settings and did not realize about that, uffff!
Going to install ml again right now.

Thank you very much :)
Title: Canon 700D / T5i
Post by: JamesSteele on December 01, 2014, 04:48:51 AM
Did a shoot today with my 700D and wanted to use ML for the intervalometer function so I could take a series of photos spaced a few seconds apart.  I noticed something interesting.  I'm using an external standard def monitor with the Canon AV cable just so I can see framing.  Turns out that the video output of live view to the external monitor is not stable when the 700D is booted with ML.  If I hold down the Set button while turning on the 700D and bypass ML, the output to the external monitor is steady.  Additionally when ML isn't active, colors look more true on the external monitor.  When ML is booted, when the intermittent video output appears, colors are over-saturated.

I don't actually own an HD TV (I know... I know) so maybe this only happens with the AV cable that breaks out to standard composite output on RCA, but it is an issue.  My apologies if this is the wrong place for "bug reports" but I'm assuming this issue happens just with 700D?  I'll do a search also to see if this is more common or if I posted in wrong area.
Title: Re: Canon 700D / T5i
Post by: a1ex on December 01, 2014, 08:45:45 AM
Can you record a video to show the issue? Also show the settings from the Display tab - one of them might be altering the colors.

I doubt there are many people who use an external monitor for still photos.
Title: Re: Canon 700D / T5i
Post by: JamesSteele on December 01, 2014, 09:46:53 AM
I'll check into it.  I think it may have been doing it for video too.  I was using the monitor just because it was a self-taken group shot (three individuals) and the camera was far enough away that even with the articulating screen of the T5i facing toward us, it was hard to judge focus, framing, etc.  Video was intermittent any time the camera was booted with ML.  I'll try and shoot video of it with my iPhone.  Thanks! :)
Title: Re: Canon 700D / T5i
Post by: christoffl on December 02, 2014, 09:24:41 PM
This is my first post here.
I am using Magic lantern for Timelapse only. My most loved feature is the BulbRamp (sunset/ Sunrise) with my 5DMKII.
Now I bought a 700D and put ML on.
And here is my problem- I cannot find the BuldRamp menu.
I hope the question is not to stupid - maybe one of you can help me out.

thanks
Christoph
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on December 02, 2014, 09:35:26 PM
BulbRamp is no longer supported. Try this method instead:
http://www.magiclantern.fm/forum/index.php?topic=5705.0
Title: Re: Canon 700D / T5i
Post by: christoffl on December 03, 2014, 01:27:14 PM
Hello Walter,

thanks for the quick reply. Hm, then I have to get familiar with ETTR before my next travel.

Christoph
Title: Re: Canon 700D / T5i
Post by: dropdead on December 05, 2014, 01:43:53 AM
I know it's a noob question that is basicly answered on the faq, but is the nightly build available for the 700D moderately stable?
My 700D has a 2 year warranty and it's just going to reach year 1 in December, and with the void/doesen't void warranty incertainty around ML I'm troubled with the thought of screwing up my camera.
Title: Canon 700D / T5i
Post by: JamesSteele on December 05, 2014, 03:25:53 AM
Hi dropdead. I was hesitant like you were because I had just bought a T5i (700D) refurb direct from Canon.  I went ahead and installed it and followed the instructions carefully and it all worked fine. It's also easy to remove the boot flag with the latest version. It's been very stable for me, however I've pretty much decided to use it sparingly, because it seems like my camera runs warmer when ML is loaded and I'm a little nervous about it.  The feature I really wanted was the ability to have finer control over ISO and color temperature which I could have gotten without ML by getting something like a 60D, which in hindsight might have been there better move for me. What I do is just run ML when there's a feature I feel I need for a particular situation that I can't get with the stock firmware.
Title: Re: Canon 700D / T5i
Post by: TAB on December 18, 2014, 06:42:41 PM
I am filming a live event in two weeks, and the organizers want to me to connect my T5i to a projector screen at the event, for the audience. Problems:

1) The LCD shuts off when HDMI is connected, so I can't see what I'm shooting unless I'm looking at the projector.
2) The Magiclantern GUI appears on the HDMI output. Hitting the info button cycles through the canon display options, but there's no way to get a image totally clear of overlays.

I don't need an actual "clean" video for external capture, I just need the LCD screen to keep working with ML, while outputting "clean" hdmi to the projector. Is this remotely possible?

Any ideas??

Edit:
OK I figured out how to clear the overlays... but the problem remains- I need to use the LCD simultaneously. Is this possible?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on December 18, 2014, 07:12:00 PM
HDMI splitter + cam mounted HDMI display/EVF
Or display/EVF able to passthrough HDMI.
Title: cropmarks not working
Post by: greeneagle01 on December 19, 2014, 03:37:33 AM
hello, I installed the 1.1.3 version, but the cropmarks do not work :(. Any suggestions? Also, is it normal that magic lantern only works if you have the sd card (the one you used to install) inserted?
Title: Re: Canon 700D / T5i
Post by: walter_schulz on December 19, 2014, 07:22:24 AM
Cropmarks: Won't work when using MLV because default option for MLV is "Global Draw = Off". See submenu.
ML won't load with other cards: Top of page -> User Guide -> FAQ/Installation Guide
Title: Re: Canon 700D / T5i
Post by: greeneagle01 on December 20, 2014, 06:34:42 AM
hmm, what do I do with the submenu?
Title: Re: Canon 700D / T5i
Post by: greeneagle01 on December 20, 2014, 06:44:27 AM
Oh never mind, I got it! Thank you!
Title: Re: Canon 700D / T5i
Post by: DigitalVeil on December 27, 2014, 10:46:56 PM
Finally got around to putting ML on my 700D this weekend, lots of fun. Focus peaking, zebras, HDR video, and raw/mlv video are my favorite features so far. 

The SD slot on this camera is rated for 40MB/s right?  My card (samsung pro) is rated for 80MB/s writes, but the ML benchmark seems always ends up in the 30-35MB/s range and recording will sometimes stop when CBR is set to 3.0x (with audio disabled) even though that should theoretically be fine.  If my card is the bottleneck here even though it's rated for well over 40MB/s, best believe I'll be returning it.
Title: Re: Canon 700D / T5i
Post by: walter_schulz on December 28, 2014, 01:07:52 AM
Press Play button after starting benchmark to activate playback mode. Running movie or photo mode will show lower numbers.
Title: Re: Canon 700D / T5i
Post by: DigitalVeil on December 28, 2014, 08:58:48 AM
Thanks for the tip.  I actually found I was able to record at 3.0x CBR continuous just fine after disabling all overlays.  Footage looks great at 3.0 :)

Just out of curiosity - does anyone know the explanation why this camera can't go beyond a width of 1728 in raw recording?  What would happen if the block was removed and you set it to something above 1728?
Title: Re: Canon 700D / T5i
Post by: dmilligan on December 28, 2014, 06:37:27 PM
1728 is the maximum width of the raw data buffer in that particular video mode (where every 3 lines skipped when reading out => only 1/3 of pixels are actually sampled and readout; some higher end cameras do binning instead of skipping, but the raw buffer is still 1/3 size of actual sensor). If you forced the EDMAC to copy a larger section of buffer, you would just get garbage data and the alignment would be off.

The only way to get around this is to use a different video mode like "crop" mode where there is no line skipping.
Title: Re: Canon 700D / T5i
Post by: DigitalVeil on December 28, 2014, 09:24:22 PM
Gotcha, thanks for taking the time to explain =)
Title: Re: Canon 700D / T5i
Post by: JPdestro on January 07, 2015, 02:12:50 AM
I have just downloaded ML for my T5i and have encountered some issues :/ ( actually I've downloaded and installed like 10 versions and have encountered the same issue in all of them )

I can't figure out the live audio preview. I have all the cables and a external mic, but ML menu does not show the option to enable me to preview audio live. This was one of the key factors for me when I first downloaded it and still can't get it
Title: Re: Canon 700D / T5i
Post by: nicholaslyz on January 07, 2015, 06:18:07 AM
Hi, I'm new to this forum and I've just installed ML on my 700D. I can't get the image overlay (focus peaking, zebras) to appear in image playback mode, is there a way around this?
Title: Re: Canon 700D / T5i
Post by: DigitalVeil on January 08, 2015, 03:03:21 PM
In FPS Override, I can't seem to find the "high FPS" option nor can I overcrank beyond 60fps (even when setting 65 or 70fps).  Is this disabled/impossible on the 700D?
Title: Re: Canon 700D / T5i pink dots problem
Post by: Jotys on January 09, 2015, 02:58:22 AM
Hi, I am new to ML. Tried my t5i with latest ML and I have problem with pink dots, only way that I can fix
pink dots is record in raw not ml and then run through raw2dng_cs2x2. Tryed also MlRawViewer_1_3_3 but
still can see the pink dot. Is there way to fix the pink dots if recorded in ml rec mode ( mlv ) with sound ?
Title: Re: Canon 700D / T5i
Post by: DigitalVeil on January 09, 2015, 07:41:10 PM
Try raw2cdng (http://www.phreekz.de/wordpress/2014/04/magiclantern-raw2cdng-1-5-0/) and make sure 'chroma smoothing 2x2' is enabled.  Works for my 700D mlv files.  Raw2cdng is a little finicky though.  Only the latest few versions have chroma smoothing, and among those versions, 1.6.3 was the only version that worked properly on Windows 8.1 for me (ironically the only one labeled 'buggy') and even that version sometimes rejects the mlv files for whatever reason.  If that happens just close and re-open the app, make sure you are dragging the mlv files in from your desktop instead of another folder.
Title: Re: Canon 700D / T5i
Post by: andy kh on January 09, 2015, 08:11:54 PM
its not neccessary to drag mlv files from desktop. i can drag and drop from any drive. i even drag from my sd card. it works
Title: Re: Canon 700D / T5i
Post by: DigitalVeil on January 09, 2015, 08:20:23 PM
Isolated experience.  Just because it works on your system doesn't mean it works universally.  It's quite buggy on Windows 8.1
Title: Re: Canon 700D / T5i
Post by: Jotys on January 10, 2015, 02:33:29 AM
Thanks a lot . Problem solved. I had to try all the version of raw2cdng. The only one which work for me is this one raw2cdng 1.6.3 beta – 21.11.2014 BUGGY well only one mlv file tested so far. The latest version  would not allow me to load any file even from Desktop.I am using  Windows 7 64bit.
Title: Re: Canon 700D / T5i
Post by: DigitalVeil on January 10, 2015, 02:39:27 AM
Interesting.  Like I said, 1.6.3 was the only version that worked for me also.  1.6.5 wouldn't accept my mlv files.  I figured the problem was W8.1 and that it would be fine on W7.  Maybe for now it's just best to shoot raw instead of mlv, there are more options for raw.
Title: Re: Canon 700D / T5i
Post by: andy kh on January 10, 2015, 05:38:56 AM
i too hav problem with 1.6.5 and i hav reported to chmee on rawcdng discussion. you guys shoul also report in the link below chmee can help in his next version
http://magiclantern.fm/forum/index.php?topic=5618.0
Title: Re: Canon 700D / T5i
Post by: hoopy on January 15, 2015, 11:57:15 PM
Hi stephen here from Ireland. Anyone recommend a good stable release for the 700d. So many to choose from. I had my 60d running v2.3 for the past year and love it. Got a second camera and want to install ML on it. First time on a nightly build.
PS: could I update my 60d to a nightly build also to have a similar interface as the 700d.
Thanks in advance.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 16, 2015, 12:33:00 AM
Go with latest. Try older versions if you find current version troublesome to use.
And run ExFAT filesystem recording RAW/MLV. Adds handling issues but will reduce stress when reaching 4 GB margins. (Reduce stress as in "lower probabillity for breaks using higher data rates for longer durations")
Title: Re: Canon 700D / T5i
Post by: hoopy on January 16, 2015, 01:14:58 AM
Thanks a mill for all the info.  ;)
Title: Re: Canon 700D / T5i
Post by: fotoguy on January 19, 2015, 07:24:49 AM
I had my new T5i for 1 week and installed Magic lantern. Now, the remote does not work - even after uninstalling ML and reinstalling the Canon firmware. I've tried a couple different remotes and they both worked before the ML install but not now. Any ideas?

I originally installed the 2014-10-07 nightly, then tried the 2015-01-14 nightly. Had the correct Canon firmware.
Title: Re: Canon 700D / T5i
Post by: walter_schulz on January 19, 2015, 07:44:08 AM
Wired remote? IR remote? Other?
If wired remote: Is AF working? If not: Try to trigger in MF mode.
Title: Re: Canon 700D / T5i
Post by: fotoguy on January 19, 2015, 07:49:01 AM
Both wired remotes. I also tried it with 2-second and 10-second timer. AF works when half-pressing shutter button on camera.
Title: Re: Canon 700D / T5i
Post by: walter_schulz on January 19, 2015, 07:56:37 AM
Sounds like cam's remote control terminal got jammed. Wired remote control uses a stereo phone connector (TRS) in 2.5 mm. There are 3 wires:
- Common ground
- Focus
- Shutter (not working anymore)

L = Shutter
R = Focus
GND = Ground
(http://upload.wikimedia.org/wikipedia/commons/thumb/9/9f/3.5mm_jack_plug_3_norm.svg/463px-3.5mm_jack_plug_3_norm.svg.png)
Source: Wikipedia


Title: Re: Canon 700D / T5i
Post by: fotoguy on January 19, 2015, 08:36:28 AM
Thanks, walter_schulz. I'll check the continuity on it.
Title: Re: Canon 700D / T5i
Post by: Sheldon Cooper on January 20, 2015, 09:53:12 AM
Hello, sorry in advance for my english!  :-[

I'm a total newbie, i installed the latest nightly builds and i can't get 1/50 shutter speed in movie mode, just 1/45 184° and 1/60 144° .
Can anybody help me to find a solution? Thank you.
Title: Re: Canon 700D / T5i
Post by: walter_schulz on January 20, 2015, 09:58:33 AM
Movie tab -> Image Fine-tuning -> Shutter fine-tuning
Title: Re: Canon 700D / T5i
Post by: Sheldon Cooper on January 20, 2015, 10:29:33 AM
Thank you walter_schulz, what is the correct value?  I set it to -0.49ms and now i can get 1/50 shutter speed.
Title: Re: Canon 700D / T5i
Post by: walter_schulz on January 20, 2015, 11:13:40 AM
You wanted 1/50 and now you have 1/50.
Problem solved. If not: Describe your problem.
Title: Re: Canon 700D / T5i
Post by: Sheldon Cooper on January 20, 2015, 12:10:06 PM
Just asking if there is a common/better setting between shutter speed and shutter fine-tuning.
No problems, thank you.
Title: Re: Canon 700D / T5i
Post by: fotoguy on January 20, 2015, 07:10:45 PM
Hello. Getting back to my remote problems on a few-week old 700D, I tried a wireless remote and when I press the button, the info on the LCD disappears for a second, but the camera doesn't focus and the shutter does not release. So I know it is getting some kind of signal, but it's only being picked up by the battery grip. When I remove the grip, the wireless remote does nothing to the camera (yes, I have the remote/timer turned on). I'd hate to have to send this thing in to Canon since it's only a few weeks old. I went through the entire ML menu and didn't see anything that could be changed. Any help, please?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 20, 2015, 07:18:12 PM
Try resetting the cam to factory defaults first. Don't forget to reset Fn settings, too.
The remote is compatible with 700D?
Title: Re: Canon 700D / T5i
Post by: fotoguy on January 20, 2015, 07:51:53 PM
You, sir, are a GENIUS! Thank you so much for your INVALUABLE help. That fixed it. I know that in the world of photography it's only a Rebel T5i. But it sure means a lot to me. Thanks again for taking your time and brain power to help me out with this. Very much appreciated!

EDIT: Actually, the wireless remote works only on the battery grip now. Yes, it used to work on the camera, too. Wired still does not work.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 20, 2015, 07:55:39 PM
You're overacting a bit. That was pretty much Troubleshooting 101. Glad it helped.
Title: Re: Canon 700D / T5i
Post by: fotoguy on January 20, 2015, 08:02:30 PM
Sorry to be such a pain. It's taken me two months to get caught up financially after buying this camera. Should the 'clear camera and clear C.Fn' operations also clear the 'My Menu' settings too? They're all still there.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 20, 2015, 08:09:06 PM
That's correct. See manual page 213-216. Those settings marked "Unchanged" will be left untouched. "My Menu" is such an item.

EDIT:
What's status now?
IR remote working with/without grip?
Wired remote working?
Title: Re: Canon 700D / T5i
Post by: fotoguy on January 20, 2015, 08:47:52 PM
I just find it curious that neither the wired NOR wireless remotes work. Even the battery grip only focuses 1/3 of the time and trips the shutter rarely. No problems with the shutter button... yet.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 20, 2015, 08:52:30 PM
Set lens to manual focus and try again.
Title: Re: Canon 700D / T5i
Post by: fotoguy on January 20, 2015, 08:58:00 PM
Tried that and tried different lens. No good. I also tried it without the battery grip.

I talked to Canon. They said that eBay is not an authorized retailer so it may not be covered by the warranty, but to send it in anyway. The seller has sold MANY of them, so he may actually own a store. eBay is not the reseller, it's just the way the retailer advertises. I don't know if that matters. Also, he is in Canada, so that could make a difference too. Yes, I just checked the warranty and it does not include purchases made out of the U.S.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 20, 2015, 09:16:50 PM
Any chance to test this remote with a second 700D or use a 2nd remote known good?
Title: Re: Canon 700D / T5i
Post by: fotoguy on January 20, 2015, 09:19:29 PM
I updated my last message. I've tried other working wired and wireless remotes - no good.
Title: Re: Canon 700D / T5i
Post by: deanc38 on January 21, 2015, 08:50:13 AM
Finally got the courage to install ML on my 700D last night.  Everything went out smooth and the added functionality are a bit overwhelming  :D

Now the bad part....I noticed that the camera becomes warm after sometime and I hardly noticed this before even with LV turned on all the time.  I'm a bit concerned about this as this is a new camera, I have seen on previous post that their camera gets warm as well, but no definite explanation or no one answered if this is normal.  So I ask again, is this normal?  Does your 700D get warm on normal use with ML?

BTW, a got the latest nightly build installed.
Title: Re: Canon 700D / T5i
Post by: walter_schulz on January 21, 2015, 09:07:44 AM
You can try if there is a difference. Just press SET at startup and ML tasks will not be executed. Now try your best to use the cam as with ML (impossible, I know) and report back.
One thing you can not reproduce: RAW/MLV recording. Your SD-card interface is able to do about 41 MByte/s and doing so will warm up your card quite a bit and battery, too. MOV/H.264 recording without tweaks will just use up to 6 MByte/s.

If you are concerned about the temperature number displayed: That is pretty much just a number at time of writing. See http://www.magiclantern.fm/forum/index.php?topic=9673.0 and if you have some time to run your 700D through this procedure you earn some karma. ;-)
Title: Re: Canon 700D / T5i
Post by: deanc38 on January 21, 2015, 01:30:07 PM
I'll try re-install ML again and give it another try with your suggestion and see if there will be any difference.  Thanks...
Title: Re: Canon 700D / T5i
Post by: damir1994 on January 22, 2015, 03:17:01 PM
Hey guys,

I have 700d with ML only what is not working is Info option it says info.ml is missing. I have reinstalled same ml version and again same problem.
Its not big deal to dont have this info, but because i am beginner in recording that can help me.
Title: Re: Canon 700D / T5i
Post by: Avro_Arrow on January 26, 2015, 01:48:37 PM
Greetings fellow ML users!
I'm not sure if this is a bug or if there is a workaround...

I was trying to use the intervalometer.
I set up my shot as normal and disconnected my lens as is normal for time lapse.
I fired up the ML intervalometer and set it to start.
It did it's countdown and took the first picture.
Then it came up with a lens communication error and quite.
I've shot tethered to a laptop many times and never had this problem before.

Any comments or suggestions?
Thanks
Title: Re: Canon 700D / T5i
Post by: GeorgeTB on February 01, 2015, 10:29:54 AM
Hello,

I'm trying to download but when I select the 700D and push the download button, I get an error message (404).

George
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on February 01, 2015, 10:31:57 AM
No problem here.
Direkt link: https://builds.magiclantern.fm/jenkins/job/700D.113/107/artifact/platform/700D.113/magiclantern-Nightly.2015Jan29.700D113.zip
Title: Re: Canon 700D / T5i
Post by: deanc38 on February 04, 2015, 12:41:42 PM
On my previous post, I was concerned about temperature reading when ML is running.  Walter suggested to disable ML in order to compare, but found out that my hands is not a very good temperature sensor. :D

Anyways,  I got a FLIR camera kicking around and decided to take some measurements.  Two sets of measurements were made, one with ML OFF and the other with ML ON. Three samples were taken on each set, first is to get the initial temperature, second is roughly midway during the test, and the last one is at the end of the sampling period.  Test duration is about 15 minutes for each set with LV active, power saving disabled and screen off disabled.

ML OFF

(http://i190.photobucket.com/albums/z92/deanc338/4-in-1%20rebuild/IR000053_zpsutwtrapi.jpg)

(http://i190.photobucket.com/albums/z92/deanc338/4-in-1%20rebuild/IR000054_zpsmsawwoxx.jpg)

(http://i190.photobucket.com/albums/z92/deanc338/4-in-1%20rebuild/IR000055_zpsyddujzmb.jpg)

ML ON

(http://i190.photobucket.com/albums/z92/deanc338/4-in-1%20rebuild/IR000057_zps7qrufbmj.jpg)

(http://i190.photobucket.com/albums/z92/deanc338/4-in-1%20rebuild/IR000058_zpsrypfr2xu.jpg)

(http://i190.photobucket.com/albums/z92/deanc338/4-in-1%20rebuild/IR000059_zps0uakl5e8.jpg)


Title: Re: Canon 700D / T5i
Post by: Jeff TS on February 04, 2015, 10:16:47 PM
HI. I'm a total newbie to Magic Lantern. I shoot video with my 700D. I installed ML mostly so I could see audio meters. But I don't have the first clue as to how to use ML and make them show up. Can someone help with a step by step on getting them to show and work?  Thanks!
Title: Re: Canon 700D / T5i
Post by: deanc38 on February 05, 2015, 01:52:13 AM
Quote from: Jeff TS on February 04, 2015, 10:16:47 PM
HI. I'm a total newbie to Magic Lantern. I shoot video with my 700D. I installed ML mostly so I could see audio meters. But I don't have the first clue as to how to use ML and make them show up. Can someone help with a step by step on getting them to show and work?  Thanks!

Hi Jeff,

First stop      - http://wiki.magiclantern.fm/faq
Second stop - http://wiki.magiclantern.fm/install
Third stop    - http://wiki.magiclantern.fm/userguide

Since you've already got ML installed, I'm sure a lot of your questions have answers on the third stop.  Just go slow and experiment and then try understand the changes you might want to do on the settings.

I too just got ML installed a few weeks ago and I find the menu intimidating at first but managed to use some of it based on my needs.

BTW, to get the menu to show up just press the trash button. :)
Title: Re: Canon 700D / T5i
Post by: Jeff TS on February 05, 2015, 06:52:35 AM
Thank you. Yes I've gotten as far as the menu, but I still don't have a clue as to how to turn on the audio meters. I was expecting an audio icon in the menu which would enable me to turn on the audio features, but i don't see one. Am I doing something wrong?
Title: Re: Canon 700D / T5i
Post by: sarkarshomit on February 05, 2015, 12:15:21 PM
Jeff..try pressing the "info" button on stndby screen or live view screen till u get the ML overlay screen...i think the sound shows up there on that ML screen.
Title: Re: Canon 700D / T5i
Post by: Felipe on February 05, 2015, 01:41:26 PM
You have to load a module at
https://bitbucket.org/mk11174/700d113/downloads/
Title: Re: Canon 700D / T5i
Post by: Jeff TS on February 05, 2015, 10:39:11 PM
Sarkarshomit, pressing the Info button worked! Thank you
Title: Re: Canon 700D / T5i
Post by: Ghostrider771 on February 06, 2015, 03:56:19 AM
Hello
Thinking about installing ML to my T5i, but I have been hesitant.
My questions are
1. I know it shoots video in the Raw, but does it make the aspect ratio higher then 1920x1080?(like to a 2k)
1.5. If it does shoot to a 2k can the SDXC card still work for it?
2. I see the Nightly bulb latest update now listed on the site, is that the only thing I need to run ML?
3. Will it be easy to edit in Premiere?
Thank you for your time
Title: Re: Canon 700D / T5i
Post by: sarkarshomit on February 06, 2015, 08:28:46 PM
Wow, jeff...i cant believe a total newb like me who took a total blind shot actually helped u...u cannot believe how glad that makes me....cool bro...

now some questions from my end.....

guys....i was seeing this video



@ 9.46 i want to create something similar....@ 10.22 u will see a screen on camera that shows on MOVIE option u see load h264.ini..... I dont have taht...i see something else....how to get that h264.ini working in my 700D
Title: Re: Canon 700D / T5i
Post by: fotoguy on February 11, 2015, 02:36:23 PM
sarkarshomit: In the YouTube video, he's using a different camera with a different version of ML. Your menu will be different.
Title: Re: Canon 700D / T5i
Post by: fotoguy on February 11, 2015, 02:44:59 PM
On the previous page, I was having trouble with my remotes. I sent the camera to Canon and they could not find any problem with the camera. I got it back yesterday and it still would not work. I tried it with and without the battery grip, made no difference. Then, I messed with the settings on the intervalometer built into the battery grip and it the remotes started working. Apparently, the problem was in the battery grip. How Canon got it to work is a mystery to me. I first tried it without the grip and it didn't work for me.

Anyhow, the problem was definitely NOT from Magic Lantern. I am so glad to discover that. Magic Lantern is the kind of product that, once you try it, you never want to be without it again.

Big thanks to Walter Schulz for all your help!
Title: Re: Canon 700D / T5i
Post by: Tdbraban on February 12, 2015, 02:48:49 PM
First off I'd like to express my appreciation for everyone contributing to this project. This firmware has made my camera so much more useful.

I like to shoot at high bitrate h.264 with this camera and it works great even with grading after converting to avid DNxHD. The RAW option is extremely useful when I need to capture low light situations that would be a mess with h.264.

I recently bought a rode shotgun mic for my 700D and was wondering if there is any progress on the audio monitoring capabilities for the 700D.
Thank you!


Title: Re: Canon 700D / T5i
Post by: sven1043 on February 12, 2015, 09:57:59 PM
I have one question for using ML with my Canon 700D: where can I find the "trap focus" function? or is this function not integrated in ML for the 700D?

Thanks for your help
Title: Re: Canon 700D / T5i canon 3rd party flashes limitation in Live View mode
Post by: Jotys on February 12, 2015, 10:02:19 PM
t5i not allow to trigger 3rd party flash in live view. Is there any work around with ML. I am using  Yongnuo YN460-II Speedlite on camera and also tried with NPT-04 4 Channel Wireless Hot Shoe Flash Trigger. If I connect the flash to camera with PC sync cord it allowed me to shoot in live view but everything else is disabled ( can't exit live view mode or press any buttom. Is there a 3rd party trigger which will work in Live view?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on February 12, 2015, 10:13:04 PM
Quote from: sven1043 on February 12, 2015, 09:57:59 PMwhere can I find the "trap focus" function? or is this function not integrated in ML for the 700D?

https://builds.magiclantern.fm/#/features
Not there, sorry. My 650D doesn't trap, too and - according to devs - it won't be changed because Canon changed cams behauviour.
Title: Re: Canon 700D / T5i
Post by: teryoki on February 13, 2015, 08:18:51 PM
Hi everyone, I just bought my 700D almost a month right now and I am really curious about ML. I just started creating videos and basically I am a newbie in this field. I have watched videos and read reviews about this amazing firmware. I also downloaded the compatible build from (http://builds.magiclantern.fm/#/). However, I need some information from people who actually installed and used it. Here are some of my questions:

I have two SD cards, should both card contain ML firmware?

If in any case I would like to remove ML, is it possible? How to restore the firmware on the 700D?

I am also interested in LUTs, when shooting in RAW video, will it provide me with log?

Thank you very much for your help. This will really help me in my future endeavor. 

Title: Re: Canon 700D / T5i
Post by: Walter Schulz on February 13, 2015, 08:23:24 PM
1+2:
Top of page -> User Guide -> FAQ
http://www.magiclantern.fm/forum/index.php?topic=11108.msg107864#msg107864
Title: Re: Canon 700D / T5i
Post by: Helmut on February 14, 2015, 11:03:17 AM
Hi,

I´m missing a feature: a permanent mirror lockup when shooting photos using LiveView.

Is that somehow possible? From my limited technical understanding I see no reason why the mirror needs to move in that situation.

Or is it already implemented and I just didn´t find the option yet?

Another question: Is there any way to activate LV + a magified window + focus peaking? I don´t care, how slow it would become.

Thanks for any hint,

Helmut
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on February 14, 2015, 11:09:07 AM
http://www.magiclantern.fm/forum/index.php?action=search
Title: Re: Canon 700D / T5i
Post by: Helmut on February 14, 2015, 11:23:56 AM
In case the reference to the forum search was meant for me - does that mean the answer to my questions is "yes, it´s possible"?

Within the last days I read a lot here, but couldn´t find answers to my questions concerning these specific camera model. That´s why I ask in the forum now.

I would really appreciate a general answer like "sure, no problem" or a "forget it with the 700D".

Thank you!



Title: Re: Canon 700D / T5i
Post by: neveripe on February 18, 2015, 09:12:55 PM
Am I correct that this could be used on 100D (as I've read that 100D is almost identical to 700D in terms of internals) ?

If not, could somebody advise where can one find version for 100D?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on February 18, 2015, 09:17:01 PM
Quote from: neveripe on February 18, 2015, 09:12:55 PMIf not, could somebody advise where can one find version for 100D?

There is none at time of writing. See http://www.magiclantern.fm/forum/index.php?topic=5529.0
Title: Re: Canon 700D / T5i
Post by: m3racing88 on March 04, 2015, 05:47:55 PM
A couple questions/problems:

I am using Magic Zoom, Medium, 3:1 (which I love) but when I hit record the zoom window flickers. I have read other similar problems and things were suggested like charging battery but nothing seems to fix this. Can anybody offer help with this?

Is there a way on the T5i to increase the size of the histogram and/or move its location on the screen?
Title: Re: Canon 700D / T5i ML and Pink Dots
Post by: pobmedia on March 12, 2015, 02:42:48 AM
I'm turning to the experienced ML 700D / T5i users for help.

I've been searching, reading, watching videos for several days to figure out how to remove the pink and green dots on my magic lantern raw footage...to no avail.

My workflow is shoot raw, use either Rawmagic Lite or raw2dmg, then Adobe DMG converter.  I've used Rawtherapee and Davinci Resolve...trying desperately to remove these dots.  Rawtherapee works the best, but there are still dots.

I'd rather prevent them in the first place as any removal adds several steps.

Any help from experienced ML users is appreciated.

(The 2 lenses I'm using, both of which result with same results, Canon 24mm 2.8 and 50mm 1.8)
Title: Re: Canon 700D / T5i
Post by: Jotys on March 12, 2015, 04:49:38 AM
I've been there too. I dont know about mac but if you are on PC then download raw2cdng.1.7.0 from http://www.phreekz.de/wordpress/2014/04/magiclantern-raw2cdng-1-5-0/ (http://www.phreekz.de/wordpress/2014/04/magiclantern-raw2cdng-1-5-0/) and make sure chroma smoothing is checked. Only this one work for me.
Title: Re: Canon 700D / T5i
Post by: petermarin on March 12, 2015, 07:49:30 AM
Can someone please explain how to fix audio on Canon 700d? I just installed ML in order to fix the audio gain that my camera receives when recording video. I can't find the audio module or where I can turn the AGC off. Please help and thank you!
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on March 12, 2015, 08:27:58 AM
Read your cam's manual. AGC off is part of Canon's menu.
Title: Re: Canon 700D / T5i
Post by: petermarin on March 12, 2015, 09:36:27 PM
I can't find the AGC off in the Canon menu
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on March 12, 2015, 10:03:15 PM
p198
Title: Re: Canon 700D / T5i
Post by: petermarin on March 12, 2015, 11:08:28 PM
I tried that but there's still audio gain.
Title: Re: Canon 700D / T5i
Post by: petermarin on March 12, 2015, 11:47:31 PM
I need MAJOR assistance right now. I downloaded the vol_64 from https://bitbucket.org/mk11174/700d113/downloads/ and now my sound isn't working AT ALL! I don't know what to do. Please help!
Title: Re: Canon 700D / T5i
Post by: pobmedia on March 15, 2015, 02:17:35 AM
Quote from: Jotys on March 12, 2015, 04:49:38 AM
I've been there too. I dont know about mac but if you are on PC then download raw2cdng.1.7.0 from http://www.phreekz.de/wordpress/2014/04/magiclantern-raw2cdng-1-5-0/ (http://www.phreekz.de/wordpress/2014/04/magiclantern-raw2cdng-1-5-0/) and make sure chroma smoothing is checked. Only this one work for me.

Thanks, but from what I've read on other posts, and my own experience with a Mac, is the Chroma Smoothing isn't available.  I'm now thinking of using someone else's PC just for this purpose and then use my Mac for the rest of the work.

Joeys, Did you have these Pink Dots on every single video of yours?  Or is there certain settings to avoid them all together?

Thanks.
Title: Re: Canon 700D / T5i
Post by: pobmedia on March 15, 2015, 02:25:34 AM
Quote from: petermarin on March 12, 2015, 11:08:28 PM
I tried that but there's still audio gain.

You can only disable the audio within Canon or just switch to manual.  From manual, dial down all the way, then come back right 4-6 ticks.  Unfortunately, ML for the 700D isn't built the same way as other cameras.  So no AGC, and other, controls within ML.

I too was hoping, then researching for days, that I could have all sorts of audio controls within ML.  But as of now the 700D nightly builds haven't caught up to the other Canons.  If I knew code, I'd attempt it.

Just a thought, if you are using ML and there is so much going on with this hack, then you might consider using an alternative external device to capture audio.
Title: Re: Canon 700D / T5i
Post by: Jotys on March 15, 2015, 04:08:04 PM
pobmedia it's on all raw videos. I tried probable all the converters and they remove 80% of the dots but after editing the video you can still see the left over dots. Sorry I dont know about Mac I am on PC and like I said raw2cdng.1.7.0 remove all the dots. Try to look for raw2dng_cs2x2 for mac or other converter with command line so you can tell the converter to do cs2x2 manually.
Title: Re: Canon 700D / T5i
Post by: dmilligan on March 15, 2015, 06:53:28 PM
mlv_dump can do chroma smoothing (download link for mac/linux/windows in this thread: http://www.magiclantern.fm/forum/index.php?topic=7122.0) as can MLVFS (http://www.magiclantern.fm/forum/index.php?topic=13152.0)

Title: Re: Canon 700D / T5i
Post by: owowowo on March 17, 2015, 12:09:33 AM
Hi everyone,

I know it is odd to ask about different model in this thread. Does anyone interested on making the port to 100D. It has similar spec to 700D. I am one of the person who really want ML happen on this tiny dslr. Please help.

the 100D thread has been created for sometime. But there is still nothing much happening.
http://www.magiclantern.fm/forum/index.php?topic=5529.250

I think it would be great if I could get the 700D expert to help out what we are struggling right now.
Here is what we got so far:
https://bitbucket.org/niklastisk/100d-testing

Or can I modify the current 700D build for 100D? Would that be quicker?

Thank you in advance!

Title: Re: Canon 700D / T5i
Post by: JohnTwenty on March 17, 2015, 07:02:15 PM
Hi everyone,

I will have to record a wedding in two weeks. Since I'll be filming with my DSLR, I wanted to use a Rode VideoMic. Now that I've got it I wanted to use ML's Audio settings to disable AGC.

However in the current nightly March 16th there is no Audio menu.

Can anyone tell me what I can do to fix this?

Cheers
J.T.
Title: Re: Canon 700D / T5i
Post by: dmilligan on March 17, 2015, 07:15:16 PM
read just a few posts up from your own (#668)
Title: Re: Canon 700D / T5i
Post by: temp on March 26, 2015, 07:11:07 AM
Hi, can anyone make to support LV_3RD_PARTY_FLASH? Please! :'(
Title: Re: Canon 700D / T5i
Post by: Alexpomme on April 01, 2015, 09:00:50 PM
Hi guys,

I'm new and I really want to use magic lantern which seem really magic to me ! I just installed it following every steps but when I turn off my canon 700d, after a few seconds the screen becomes blue with an error message. (That magic lantern has been shut down so that my camera doesn't get damaged).

Does anyone know about this problem ? And does anyone know a solution ? :p

Thanks !

Title: Re: Canon 700D / T5i
Post by: Felipe on April 01, 2015, 09:22:21 PM
Same happened to me with latest version, installed march 11 version and back to normal. is working fine
Title: Re: Canon 700D / T5i
Post by: Alexpomme on April 01, 2015, 09:23:33 PM
I saw on the forum that it's a prank...I hope so... Why did I decided to install it today ahah x)
Title: Re: Canon 700D / T5i
Post by: Felipe on April 01, 2015, 09:30:17 PM
No prank ( whatever it is ), the problem began on march 23 version, probably before, march 11 is fine
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 01, 2015, 09:34:26 PM
Boys, really ... take a read ...
https://bitbucket.org/hudson/magic-lantern/commits/0022133a1e1c9c2ddbadf4c30f89d1f8558675a3
and replaced by
https://bitbucket.org/hudson/magic-lantern/commits/80cee7a6789aa04c7045bd14a35b63e410fa803b
Not that much programming skills needed to get a glimpse of what is going on.

joke_mode = (now.tm_mday == 1 && now.tm_mon == 3);
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 02, 2015, 02:46:51 PM
Funny prank,  scary at first,  but if you actually read the directions like your suppose to do with any ml error you will figure it out fast. I guess most people did not realize alls they had to do was change the date! All the work these guys have done for free, I think they deserve to have a little fun. For those people that use ml for important things,  well,  ml is always in testing,  so they should be ready for crashes anyway and not be relying on ml.
Title: Re: Canon 700D / T5i
Post by: Historical_Hall_of_Fame on April 03, 2015, 01:14:43 AM
I formatted my card...... losing pics and videos I don't have copies of................
Title: Re: Canon 700D / T5i
Post by: Historical_Hall_of_Fame on April 03, 2015, 01:32:14 AM
But now I most pay you back...I...will.................................................................get............................................................you.................................................................and...........................................................yes.........................................................................................this.............................is...the................................................................................best..............................................................April.....................................................................fools...EVER.....................................had me wanting to cry lol Next year have it say something like. You have taken nude pics your Camera doesn't like Nude pics! It has locked you out until you change your ways. 
Title: Re: Canon 700D / T5i
Post by: Mannyloco on April 05, 2015, 06:46:16 PM
No audio on my Rebel t5i
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 05, 2015, 07:05:41 PM
I doubt that.
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 13, 2015, 09:27:33 AM
Had to recompile vol64 module to support newer api, so anyone that knows about the audio gain control module for the 700d and 650d it uploaded here.
https://bitbucket.org/mk11174/700d113/downloads (https://bitbucket.org/mk11174/700d113/downloads)
Title: Re: Canon 700D / T5i
Post by: Felipe on April 15, 2015, 02:19:52 PM
There is new firmware for the 700D, T5i is the 1.1.4
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 15, 2015, 02:24:38 PM
Is someone willing to test downgrade options? Don't know if Canon's effort to discourage users downgrading may affect 700D owners, too.
Title: Re: Canon 700D / T5i
Post by: Felipe on April 15, 2015, 02:29:06 PM
No Canon DSLR Camera is usable for video without ML. It is just information if good for any thing
HOWEVER NOT GOOD NEW FOR NEW BUYERS
Since is well known 760D has only a 28 mbs bit rate ,a huge downgrade
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 15, 2015, 02:41:57 PM
We will soon having people around asking how to deal with 1.1.4. It's standard procedure in Canon's service centres to upgrade cams with newests firmware available and we will have - as usual - ML users not getting the fact about builds bonded to their firmware version and jumping on the wrong bandwagon (= updating and sorry after).
Therefore it would be fine to have that knownledge at hand if Canon put same code in it as in 5D3's 1.3.3.

EDIT: And we're talking about 700D?
Title: Re: Canon 700D / T5i
Post by: martin29studios on April 16, 2015, 04:35:56 PM
Hi Guys,

I've been using Magic Lantern on the Canon 550D for some time now and I've just started using the Canon 700D. I've installed Magic Lantern on to it but there is no audio option in the ML menu. When I plug in my Sescom cable the camera cuts off suggesting it's not recognising it.

Can anyone help me out on how to get this to work?

Thanks :)

Martin
Title: Re: Canon 700D / T5i
Post by: Licaon_Kter on April 16, 2015, 05:02:13 PM
Did you load the mlv_snd.mo module?
And if you expect to have the same options, you will be disappointed: https://builds.magiclantern.fm/#/features
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 16, 2015, 05:39:09 PM
I did go ahead and update to 114, dumped the ROM and successfully downgraded back to 113, so if anyone wants to port 114 I will be glad to share it unless I should upload it somewhere, its been awhile, but I think from what alex taught me, was not to upload it anywhere because it has Canon code.

Not sure I would want to take on another port update, making the 113 took plenty of my personal life time up.

I guess it depends on how many users buy a t5i with 114 on it and need it ported.
Title: Re: Canon 700D / T5i
Post by: Felipe on April 16, 2015, 07:30:54 PM
So mk11174 if I buy a  New T5i with the 114 already installed. How can I downgrade to 113.
Thank you for your answer
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 16, 2015, 08:55:26 PM
No, I don't believe that is possible since it started as 114
Title: Re: Canon 700D / T5i
Post by: nikfreak on April 16, 2015, 09:03:54 PM
Quote from: Felipe on April 16, 2015, 07:30:54 PM
So mk11174 if I buy a  New T5i with the 114 already installed. How can I downgrade to 113.

Quote from: mk11174 on April 16, 2015, 05:39:09 PM
I did go ahead and update to 114, dumped the ROM and successfully downgraded back to 113..

http://pel.hu/down/v113-t5i-700d-x7i-win.zip

If that doesn't work you may try EOS Utility
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 17, 2015, 12:25:22 AM
Well, I could not resist, I went and started porting to 114, all looks fine so far, up and running, just need to remember how to get the stuff for SRM because as of now it crashes when I try to use it or try to find out how much there is in the ML menu.

I did it before for 113, so I should be able to figure it out I hope.

Update! SRM is fixed, just wrong address after double checking.

Now just need to get the shutter and fps fine tuned cause it is showing weird values at the moment.

Update! I guess there is nothing wrong, I get same results with 113 with the shutter speeds, fps looks normal for sure.

So now I just need to use it awhile and try to crash it.

(http://s7.postimg.org/w0lxr3u3v/VRAM3.jpg)

(http://s7.postimg.org/k7exveiwb/VRAM0.jpg)

(http://s29.postimg.org/494aij9zr/VRAM1.jpg)

Stub Test Fine
[Pass] f = FIO_CreateFile("test.dat") => 0x3
[Pass] FIO_WriteFile(f, (void*)ROMBASEADDR, 0x10000) => 0x10000
[Pass] FIO_WriteFile(f, (void*)ROMBASEADDR, 0x10000) => 0x10000
       FIO_CloseFile(f)
[Pass] FIO_GetFileSize("test.dat", &size) => 0x0
[Pass] size => 0x20000
[Pass] p = (void*)_alloc_dma_memory(0x20000) => 0x40b11d24
[Pass] f = FIO_OpenFile("test.dat", O_RDONLY | O_SYNC) => 0x3
[Pass] FIO_ReadFile(f, p, 0x20000) => 0x20000
       FIO_CloseFile(f)
       _free_dma_memory(p)
[Pass] count => 0x3a98
[Pass] buf = fio_malloc(0x1000000) => 0x4a104094
[Pass] FIO_GetFileSize_direct("test.dat") => 0x82000000
[Pass] f = FIO_OpenFile("test.dat", O_RDWR | O_SYNC) => 0x3
[Pass] FIO_SeekSkipFile(f, 0, SEEK_END) => 0x82000000
[Pass] FIO_WriteFile(f, buf, 0x10) => 0x10
[Pass] FIO_SeekSkipFile(f, -0x20, SEEK_END) => 0x81fffff0
[Pass] FIO_WriteFile(f, buf, 0x30) => 0x30
[Pass] FIO_SeekSkipFile(f, 0x20, SEEK_SET) => 0x20
[Pass] FIO_SeekSkipFile(f, 0x30, SEEK_CUR) => 0x50
[Pass] FIO_SeekSkipFile(f, -0x20, SEEK_CUR) => 0x30
[Pass] FIO_GetFileSize_direct("test.dat") => 0x82000020
[Pass] FIO_RemoveFile("test.dat") => 0x0
[Pass] SetTimerAfter(0, timer_cbr, overrun_cbr, 0) => 0x15
[Pass] timer_func => 0x2
[Pass] SetTimerAfter(1000, timer_cbr, overrun_cbr, 0) => 0x49ee
       msleep(900)
[Pass] timer_func => 0x0
       msleep(200)
[Pass] timer_func => 0x1
[Pass] ABS((timer_time/1000 - t0) - 1000) => 0x3
[Pass] ABS((timer_arg - ta0) - 1000) => 0xa
[Pass] timer = SetTimerAfter(1000, timer_cbr, overrun_cbr, 0) => 0x4a5c
       msleep(400)
       CancelTimer(timer)
[Pass] timer_func => 0x0
       msleep(1500)
[Pass] timer_func => 0x0
[Pass] SetHPTimerAfterNow(0, timer_cbr, overrun_cbr, 0) => 0x15
[Pass] timer_func => 0x2
[Pass] SetHPTimerAfterNow(100000, timer_cbr, overrun_cbr, 0) => 0xdcb0
       msleep(90)
[Pass] timer_func => 0x0
       msleep(20)
[Pass] timer_func => 0x1
[Pass] ABS(DeltaT(timer_time, t0) - 100000) => 0x115
[Pass] ABS(DeltaT(timer_arg, ta0) - 100000) => 0xeb
[Pass] ABS((get_us_clock_value() - t0) - 110000) => 0xb6
[Pass] SetHPTimerAfterNow(90000, next_tick_cbr, overrun_cbr, 0) => 0xdcb2
       msleep(80)
[Pass] timer_func => 0x0
       msleep(20)
[Pass] timer_func => 0x3
       msleep(80)
[Pass] timer_func => 0x3
       msleep(20)
[Pass] timer_func => 0x1
[Pass] ABS(DeltaT(timer_time, t0) - 300000) => 0x152
[Pass] ABS(DeltaT(timer_arg, ta0) - 300000) => 0x120
[Pass] ABS((get_us_clock_value() - t0) - 310000) => 0xec
[Pass] MEM(&CancelDateTimer) => 0xe92d4010
[Pass] strlen("abc") => 0x3
[Pass] strlen("qwertyuiop") => 0xa
[Pass] strlen("") => 0x0
[Pass] strcpy(msg, "hi there") => 0x1add08
[Pass] msg => 'hi there'
[Pass] snprintf(a, sizeof(a), "foo") => 0x3
[Pass] snprintf(b, sizeof(b), "foo") => 0x3
[Pass] strcmp(a, b) => 0x0
[Pass] snprintf(a, sizeof(a), "bar") => 0x3
[Pass] snprintf(b, sizeof(b), "baz") => 0x3
[Pass] strcmp(a, b) => 0xfffffff8
[Pass] snprintf(a, sizeof(a), "Display") => 0x7
[Pass] snprintf(b, sizeof(b), "Defishing") => 0x9
[Pass] strcmp(a, b) => 0x4
[Pass] snprintf(buf, 3, "%d", 1234) => 0x2
[Pass] buf => '12'
[Pass] memcpy(foo, bar, 6) => 0x1adca0
[Pass] foo => 'asdfghuiop'
[Pass] memset(bar, '*', 5) => 0x1adc80
[Pass] bar => '*****hjkl;'
       bzero32(bar + 5, 5)
[Pass] bar => '****'
       t0 = *(uint32_t*)0xC0242014 => 0xec16
       msleep(250)
       t1 = *(uint32_t*)0xC0242014 => 0x4afb2
[Pass] ABS(MOD(t1-t0, 1048576)/1000 - 250) => 0x4
       LoadCalendarFromRTC( &now )
       s0 = now.tm_sec => 0x17
       Date/time: 2015/04/16 21:00:23
       msleep(1500)
       LoadCalendarFromRTC( &now )
       s1 = now.tm_sec => 0x18
[Pass] MOD(s1-s0, 60) => 0x1
[Pass] MOD(s1-s0, 60) => 0x1
       m0 = MALLOC_FREE_MEMORY => 0x1f1a8
[Pass] p = (void*)_malloc(50*1024) => 0x1209c8
[Pass] CACHEABLE(p) => 0x1209c8
       m1 = MALLOC_FREE_MEMORY => 0x12998
       _free(p)
       m2 = MALLOC_FREE_MEMORY => 0x1f1a8
[Pass] ABS((m0-m1) - 50*1024) => 0x10
[Pass] ABS(m0-m2) => 0x0
       m0 = GetFreeMemForAllocateMemory() => 0x31f6d8
[Pass] p = (void*)_AllocateMemory(256*1024) => 0x840b70
[Pass] CACHEABLE(p) => 0x840b70
       m1 = GetFreeMemForAllocateMemory() => 0x2df6cc
       _FreeMemory(p)
       m2 = GetFreeMemForAllocateMemory() => 0x31f6d8
[Pass] ABS((m0-m1) - 256*1024) => 0xc
[Pass] ABS(m0-m2) => 0x0
       m01 = MALLOC_FREE_MEMORY => 0x1f1a8
       m02 = GetFreeMemForAllocateMemory() => 0x31f6d8
[Pass] p = (void*)_alloc_dma_memory(256*1024) => 0x40840bb0
[Pass] UNCACHEABLE(p) => 0x40840bb0
[Pass] CACHEABLE(p) => 0x840bb0
[Pass] UNCACHEABLE(CACHEABLE(p)) => 0x40840bb0
       _free_dma_memory(p)
[Pass] p = (void*)_shoot_malloc(24*1024*1024) => 0x4a104074
[Pass] UNCACHEABLE(p) => 0x4a104074
       _shoot_free(p)
       m11 = MALLOC_FREE_MEMORY => 0x1f1a8
       m12 = GetFreeMemForAllocateMemory() => 0x31f6d8
[Pass] ABS(m01-m11) => 0x0
[Pass] ABS(m02-m12) => 0x0
[Pass] suite = shoot_malloc_suite_contig(24*1024*1024) => 0x117718
[Pass] suite->signature => 'MemSuite'
[Pass] suite->num_chunks => 0x1
[Pass] suite->size => 0x1800000
[Pass] chunk = GetFirstChunkFromSuite(suite) => 0x11dd28
[Pass] chunk->signature => 'MemChunk'
[Pass] chunk->size => 0x1800000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x4a104070
[Pass] UNCACHEABLE(p) => 0x4a104070
       shoot_free_suite(suite); suite = 0; chunk = 0;
[Pass] suite = shoot_malloc_suite_contig(0) => 0x117718
[Pass] suite->signature => 'MemSuite'
[Pass] suite->num_chunks => 0x1
[Pass] suite->size => 0x1dfc000
[Pass] chunk = GetFirstChunkFromSuite(suite) => 0x11dd28
[Pass] chunk->signature => 'MemChunk'
[Pass] chunk->size => 0x1dfc000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x42200064
[Pass] UNCACHEABLE(p) => 0x42200064
       shoot_free_suite(suite); suite = 0; chunk = 0;
[Pass] suite = shoot_malloc_suite(64*1024*1024) => 0x117718
[Pass] suite->signature => 'MemSuite'
[Pass] suite->num_chunks => 0x7
[Pass] suite->size => 0x4000000
[Pass] chunk = GetFirstChunkFromSuite(suite) => 0x11dd28
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x18b8000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x4a104070
[Pass] UNCACHEABLE(p) => 0x4a104070
       chunk = GetNextMemoryChunk(suite, chunk) => 0x11f538
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x36b4000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x42200064
[Pass] UNCACHEABLE(p) => 0x42200064
       chunk = GetNextMemoryChunk(suite, chunk) => 0x11f570
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x3ab4000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x419ff0a4
[Pass] UNCACHEABLE(p) => 0x419ff0a4
       chunk = GetNextMemoryChunk(suite, chunk) => 0x11f5a8
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x3b8c000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x49f240e4
[Pass] UNCACHEABLE(p) => 0x49f240e4
       chunk = GetNextMemoryChunk(suite, chunk) => 0x11f5e0
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x3c64000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x47f240e4
[Pass] UNCACHEABLE(p) => 0x47f240e4
       chunk = GetNextMemoryChunk(suite, chunk) => 0x11f618
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x3d3c000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x45f240e4
[Pass] UNCACHEABLE(p) => 0x45f240e4
       chunk = GetNextMemoryChunk(suite, chunk) => 0x11f650
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x4000000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x4ddc0064
[Pass] UNCACHEABLE(p) => 0x4ddc0064
       chunk = GetNextMemoryChunk(suite, chunk) => 0x0
[Pass] total => 0x4000000
       shoot_free_suite(suite); suite = 0; chunk = 0;
[Pass] suite = shoot_malloc_suite(0) => 0x117718
[Pass] suite->signature => 'MemSuite'
[Pass] suite->num_chunks => 0x7
[Pass] suite->size => 0x5b00000
[Pass] chunk = GetFirstChunkFromSuite(suite) => 0x11dd28
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x18b8000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x4a104070
[Pass] UNCACHEABLE(p) => 0x4a104070
       chunk = GetNextMemoryChunk(suite, chunk) => 0x11f538
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x36b4000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x42200064
[Pass] UNCACHEABLE(p) => 0x42200064
       chunk = GetNextMemoryChunk(suite, chunk) => 0x11f570
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x3ab4000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x419ff0a4
[Pass] UNCACHEABLE(p) => 0x419ff0a4
       chunk = GetNextMemoryChunk(suite, chunk) => 0x11f5a8
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x3b8c000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x49f240e4
[Pass] UNCACHEABLE(p) => 0x49f240e4
       chunk = GetNextMemoryChunk(suite, chunk) => 0x11f5e0
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x3c64000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x47f240e4
[Pass] UNCACHEABLE(p) => 0x47f240e4
       chunk = GetNextMemoryChunk(suite, chunk) => 0x11f618
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x3d3c000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x45f240e4
[Pass] UNCACHEABLE(p) => 0x45f240e4
       chunk = GetNextMemoryChunk(suite, chunk) => 0x11f650
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x5b00000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x4ddc0064
[Pass] UNCACHEABLE(p) => 0x4ddc0064
       chunk = GetNextMemoryChunk(suite, chunk) => 0x0
[Pass] total => 0x5b00000
       shoot_free_suite(suite); suite = 0; chunk = 0;
       EngDrvOut(LCD_Palette[0], 0x1234)
[Pass] shamem_read(LCD_Palette[0]) => 0x1234
       call("TurnOnDisplay")
[Pass] DISPLAY_IS_ON => 0x1
       call("TurnOffDisplay")
[Pass] DISPLAY_IS_ON => 0x0
       call("TurnOnDisplay")
[Pass] DISPLAY_IS_ON => 0x1
       SetGUIRequestMode(1); msleep(1000);
[Pass] CURRENT_DIALOG_MAYBE => 0x1
       SetGUIRequestMode(2); msleep(1000);
[Pass] CURRENT_DIALOG_MAYBE => 0x2
       SetGUIRequestMode(0); msleep(1000);
[Pass] CURRENT_DIALOG_MAYBE => 0x0
[Pass] display_idle() => 0x1
       GUI_Control(BGMT_PLAY, 0, 0, 0); msleep(500);
[Pass] PLAY_MODE => 0x1
[Pass] MENU_MODE => 0x0
       GUI_Control(BGMT_MENU, 0, 0, 0); msleep(500);
[Pass] MENU_MODE => 0x1
[Pass] PLAY_MODE => 0x0
[Pass] MEM(dialog->type) => 0x414944
       GUI_Control(BGMT_MENU, 0, 0, 0); msleep(500);
[Pass] MENU_MODE => 0x0
[Pass] PLAY_MODE => 0x0
       task_create("test", 0x1c, 0x1000, test_task, 0) => 0xb46200ac
[Pass] test_task_created => 0x1
[Pass] get_task_name_from_id(get_current_task()) => 'run_test'
[Pass] mq = mq ? mq : (void*)msg_queue_create("test", 2) => 0xb46800bc
[Pass] msg_queue_count(mq, &mqcount) => 0x0
[Pass] msg_queue_post(mq, 0x1234567) => 0x0
[Pass] msg_queue_count(mq, &mqcount) => 0x0
[Pass] msg_queue_post(mq, 0xABCDEF0) => 0x0
[Pass] msg_queue_count(mq, &mqcount) => 0x0
[Pass] msg_queue_post(mq, 0xBADCAFE) => 0xd
[Pass] msg_queue_count(mq, &mqcount) => 0x0
[Pass] msg_queue_receive(mq, (struct event **) &m, 500) => 0x0
[Pass] msg_queue_count(mq, &mqcount) => 0x0
[Pass] m => 0x1234567
[Pass] msg_queue_receive(mq, (struct event **) &m, 500) => 0x0
[Pass] msg_queue_count(mq, &mqcount) => 0x0
[Pass] m => 0xabcdef0
[Pass] msg_queue_receive(mq, (struct event **) &m, 500) => 0x9
[Pass] msg_queue_count(mq, &mqcount) => 0x0
[Pass] msg_queue_count((void*)1, &mqcount) => 0x7
[Pass] sem = sem ? sem : create_named_semaphore("test", 1) => 0xb47a0286
[Pass] take_semaphore(sem, 500) => 0x0
[Pass] take_semaphore(sem, 500) => 0x9
[Pass] give_semaphore(sem) => 0x0
[Pass] take_semaphore(sem, 500) => 0x0
[Pass] give_semaphore(sem) => 0x0
[Pass] rlock = rlock ? rlock : CreateRecursiveLock(0) => 0xb48c008e
[Pass] AcquireRecursiveLock(rlock, 500) => 0x0
[Pass] AcquireRecursiveLock(rlock, 500) => 0x0
[Pass] ReleaseRecursiveLock(rlock) => 0x0
[Pass] ReleaseRecursiveLock(rlock) => 0x0
[Pass] ReleaseRecursiveLock(rlock) => 0xf
       SW1(1,100)
[Pass] HALFSHUTTER_PRESSED => 0x1
       SW1(0,100)
[Pass] HALFSHUTTER_PRESSED => 0x0
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 17, 2015, 06:30:13 AM
I committed changes here for 700D.114 port if anyone wants to merge and compile for themselves for now. It could be a long time until the new port gets updated to nightly, if ever. Depends if testers agree it is working as good as 113 and if I sent everything correctly.

https://bitbucket.org/mk11174/700d114/commits/590323501cdb21fb49cf6f198573c1021e12bb09 (https://bitbucket.org/mk11174/700d114/commits/590323501cdb21fb49cf6f198573c1021e12bb09)
https://bitbucket.org/mk11174/700d114/commits/a546ac12b5eb908b3fcb89717475dc1c27c03231 (https://bitbucket.org/mk11174/700d114/commits/a546ac12b5eb908b3fcb89717475dc1c27c03231)
Title: Re: Canon 700D / T5i
Post by: Felipe on April 18, 2015, 01:27:00 AM
I think with the downgrade from nikfreak or new port 114 from MK11174 , I can dare to buy a new T5i,
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 18, 2015, 01:40:21 AM
Yeah, even canon is still posting the 113 firmware, but I just don't know if it is ok to Downgrade to 113 if your camera came with 114 already on it, you will have to ask maybe Alex if that is safe. It is def ok to upgrade to 114 then downgrade to 113 because I just did that fine and so have others with other models.

If it is safe for you to downgrade to 113 with a cam that shipped with 114 then you can downgrade to 113 first, install ML on it with the 113 FIR file since there is not one made for 114 yet since the port is not added yet to the public list, then once it is installed, then you can upgrade back to 114 firmware and use the new 114 port I just did, it is working just fine, just as good as 113 is working.

I can also provide a compiled version for anyone who wants to upgrade to 114 and test it, because it will probably never be updated in the nightly without testers to show it is ok as the 113 is.
Title: Re: Canon 700D / T5i
Post by: Felipe on April 18, 2015, 01:52:42 AM
At the moment, I'm doing double camera shots, T4i, T5i, most of the time, then testing could affect my living.
So, seems like the safe way is to wait until we see the 114 in the nightly builds.
God Bless ML
Title: Re: Canon 700D / T5i
Post by: mercuryknight on April 23, 2015, 07:29:17 AM
I have got a spare 700D with ML installed on 1.1.3 and then upgraded to 1.1.4. I am willing to test the new version if anyone could share the compiled files. Thanks.
Title: Re: Canon 700D / T5i
Post by: mk11174 on April 23, 2015, 09:00:41 AM
I can PM it to you, since I am not sure the devs prefer it in the threads.
Title: Re: Canon 700D / T5i
Post by: mercuryknight on April 23, 2015, 09:20:08 AM
That'd be great
Title: Re: Canon 700D / T5i
Post by: KMP on April 26, 2015, 09:54:57 AM
Quote from: mk11174 on April 23, 2015, 09:00:41 AM
I can PM it to you, since I am not sure the devs prefer it in the threads.

I'd like to test please! Thanks!
Title: Re: Canon 700D / T5i
Post by: EletroLaix on April 26, 2015, 07:06:21 PM
Hello boys are new, however, I would ask news about when will release the update for abbilitare the audio menu on the Canon 700D because the main reason why I decided to installre ML and the chance to hear the sound through headphones while recording.

Currently, how can I do ?? (I already have everything you need: the cable (miniUSB-RCA) and the converter jack 3.5)
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 26, 2015, 07:11:07 PM
Top of page -> User Guide -> FAQ -> Section "Troll Questions" -> Last one
https://builds.magiclantern.fm/#/features
Title: Re: Canon 700D / T5i
Post by: mentos on April 30, 2015, 02:51:21 AM
I have an error:
mlv_snd.mo
failed to link modules

Every time i load.
Someone can hep me?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 30, 2015, 05:10:54 AM
Make sure to have sound enabled in Canon menu and MLV_REC.mo loaded, too.

If it doesn't work:
Delete ML directory and Autoexec.bin.
Download latest nightly build.
Extract nightly build contents and copy them to card.
Insert card into cam, startup and retry. Report.
Title: Re: Canon 700D / T5i
Post by: mentos on May 01, 2015, 07:43:25 PM
I load MLV_REC.mo and sound work fine.

Thanks a lot.

Now i have this


(https://imagizer.imageshack.us/v2/953x635q90/901/01NxXc.jpg)



It's just that? No controls?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on May 02, 2015, 04:03:35 PM
https://builds.magiclantern.fm/#/features
Check Audio section.
Title: Re: Canon 700D / T5i
Post by: nerdmeetsyou on May 06, 2015, 03:59:05 PM
Hi Guys,

I read on the features list, that there is no Audio Monitoring via USB currently for the 700d.
As I'm currently thinking about buying the camera I wondered, if you could tell me, if that is something that will not change?
Or is this a feature that will eventually get added?

Thanks everyone for the hard work you put into doing this - it's probably a lot of work reverse engeneering these cameras. And I don't want this to seem like a request or anything. I just wondered, if it is something that will just eventually be added. Or something that probably never will happen.
As Im currently thinking either to buy the 600d, to have audio monitoring. Or the new 750d that just was released.
I would rather have a better camera, but having audio monitoring on the long run would be important to me.
Do you guys have an advice for me?

Thanks in advance for your help.
Title: Re: Canon 700D / T5i
Post by: mAst on May 08, 2015, 02:33:29 PM
Hello together,

I faced one issue with the zoom button (+). Usually I'm using it to confirm, that the focus is set correctly.
When I pushed it the first time, live view was getting gray and it flickered somehow. By pushing the button a second time, this issue was gone and I could see a clean picture. So my first question is, why is the behaviour different between the first and the second push?

And my main issue was, when I was starting the recording in zoomed condition my camera hung so I had to remove the battery.

I saw some communication about that in another forum of another camera, but I'm not sure if there is any solution.

So thanks in advance for every hint and guys you are really doing a great job.

Title: Re: Canon 700D / T5i
Post by: Nihal196 on May 20, 2015, 02:53:53 AM
Sorry for being a noob, but I just joined this site as I recently received my new 700D today, and I want to get Magic Lantern on it but my camera is currently running 1.1.4, when will the nightly build be available for this firmware version? I don't want to downgrade, as previous posts have mentioned that if your 700D comes with 1.1.4, you shouldn't downgrade as it could harm the camera. I just want to know a time frame of how long it might be, any guesses?
Title: Re: Canon 700D / T5i
Post by: Felipe on May 20, 2015, 03:56:01 AM
I think nobody mentioned that it could harm the camera, unless I didn't read something, but yea good question I'm about to buy another 700D and let us know how do you
solve this
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on May 20, 2015, 06:28:42 AM
Quote from: Nihal196 on May 20, 2015, 02:53:53 AM
I don't want to downgrade, as previous posts have mentioned that if your 700D comes with 1.1.4, you shouldn't downgrade as it could harm the camera.

Utter nonsense.
Please tell me where you found such statements. Reply-number, please!

Maybe you're mixing it up with 1.1.3 -> 1.1.1? First ML version for 700D was for fw 1.1.1. and 1.1.1 firmware file is not available from Canon. Same for *all* firmware versions coming with cams fresh from the bench.
And there is always (and always will be) a lag between firmware update installed on cams (in this case 1.1.3) delivered by Canon (factory + service) rendering those cameras useless for ML users until Canon makes first firmware update file available. Takes about a month, give or take.
After that devs may start to port ML to new firmware version. And there is no timeline (and never will be) for this part.
Title: Re: Canon 700D / T5i
Post by: mk11174 on May 20, 2015, 04:54:52 PM
I already ported the 114 version which is being used already by other users that messaged me for the build since it is not in the nightly yet.  If anyone needs 114 I am glad to send you link until it's in the nightly.
Title: Re: Canon 700D / T5i
Post by: Felipe on May 20, 2015, 06:17:29 PM
mk11174 Thanks yes, please send me the link
Title: Re: Canon 700D / T5i
Post by: Nihal196 on May 20, 2015, 10:58:03 PM
Oh, sorry for the confusion then!
If you were wondering what post I read it from, it is post #705
Title: Re: Canon 700D / T5i
Post by: Felipe on May 21, 2015, 10:05:35 PM
Thank you mk11174
Title: Re: Canon 700D / T5i
Post by: mk11174 on May 23, 2015, 12:23:53 AM
No problem, glad to share until its accepted in the nightly.
Title: Re: Canon 700D / T5i
Post by: Felipe on May 24, 2015, 09:36:02 PM
So far 1.1.4 working fine
Title: Re: Canon 700D / T5i
Post by: CoolBlueDog on May 24, 2015, 10:38:10 PM
I'm not sure where to report bugs but I found a minor annoyance (700D/T5i).  When the camera is used in self-portrait video mode (ie the viewfinder LCD is flipped out and to the side so that you can look at yourself), the ML menus are reversed.  It seems to happen when you go into a Canon menu and then back out (ie ML doesn't remember it's rotation/flip settings).   A quick fix is to move the viewfinder back and then forward causing it to re-adjust itself and display correctly.

Thanks for the work.  It's a wonderful addition to the camera :-)
Title: Re: Canon 700D / T5i
Post by: whitep on May 30, 2015, 11:15:15 PM
Hey Guys,

I am absolutely new to ML and i started reading the first few pages.
Short question. I recently purchased the 700D because of the Cachback
Event by Canon and it came with FW 1.1.3. Will I be able to use ML
by downloading the latest nightly (copying files on SD and activate by updating
firmware)?

Does the 700D use the features of Dual Iso?

Thanks.
Title: Re: Canon 700D / T5i
Post by: garry23 on May 30, 2015, 11:20:30 PM
 :)

https://builds.magiclantern.fm/
Title: Re: Canon 700D / T5i
Post by: whitep on May 30, 2015, 11:38:53 PM
Thanks for that Link. I allready downloaded it. But this is a nightly right?
Are there any stable releases for 700D. Do I still have to start a FW Update
even if I am allready sitting on 1.1.3?

How high is the chance to brick a camera? I really would like to use the
improved menu and superb settings but my cam is 1 Day old. Should
I wait or should I give it a try=?
Title: Re: Canon 700D / T5i
Post by: garry23 on May 30, 2015, 11:41:22 PM
There are 'only' nightlies now, as ML is managed on a rolling update basis.

Only you can decide if you wish to use ML, like thousands of others  ;)

Cheers

Garry: a very happy ML user
Title: Re: Canon 700D / T5i
Post by: Datadogie on May 31, 2015, 07:45:31 PM
Search for bricked camera. You will find a few but if you read all the posts you will find the problem is always resolved. Even Canon have agnowleded that the guarantee is still valid as long as ML is not the problem.
Title: Re: Canon 700D / T5i
Post by: axelcine on May 31, 2015, 09:27:48 PM
Hi - being a newbie I certainly do recommend, that whitep reads the 700d thread in its entirety. It's a tale of research, BW-Engineering, intimate knowledge of what users need and want from their camera. There's nothing to be afraid of - you'd have to be some kind of a Disaster Expert to brick your camera, if you follow the very simple instructions given with the nightlies. It is really very simple. But ML is a veritable smorgasboard of elegant and genious solutions for both stills and movie. ML is an expansion of my mind when shooting footage, using the follow focus, checking focus, monitoring audio input etc. etc.
The software sitting beside the ML-folder in the package only changes a flag in the camera software to allow it to check for 3rd-party firmware. If at some later date you'd like to remove all traces of ML in the camera, then just re-install FW 113 - links are found elsewhere in the 700d-thread. But -  trust me - you'd never want to do that, once you have acquainted yourself with ML. I simply love it.
axelcine
Title: Re: Canon 700D / T5i
Post by: Luminux on June 04, 2015, 03:02:02 AM
Hi,
this is my first post here, and I hope someone can help me.

I used to shoot videos with my 600D and ML, using Highlight Tone Priority [ON] and ML ISOs [multiplies of 80].
To set the 80x ISO, obviously, I set ML Digital ISO [-0.3EV], and ISO Selection [ML ISOs].
So, at the end, I have Equivalent ISO [160], which derives from a Canon analog ISO [200] minus a ML Digital ISO [-0.3]

The new 700D, when I set Highlight Tone Priority [ON], boosts the Canon digital ISO to [+1EV] (whitout the possibility to bring it to 0!) which is absolutely bad, and gives more noise.
Setting ML Digital ISO [-0.3EV] gives the multiplies of 80, but the resulting Equivalent ISO derives from a lower ISO digitally boosted!
So the Equivalent ISO [160] derives from a Canon analog ISO [100] plus a Canon digital ISO [+1EV] minus a ML Digital ISO [-0.3]

This doesn't make sense and just boosts up noise.

Plus, the ISO Selection doesn't exist anymore, so what I think is the camera uses Canon ISOs instead on ML ISOs, and that happens for this reason.

Hope someone could answer :)
Thanks!
Title: Re: Canon 700D / T5i
Post by: FILTHYbrowncow on June 04, 2015, 04:47:11 AM
I am experiencing the 5 second timeout, but only during liveview in movie mode (not live view in photo mode).  Is anybody else having this same problem?  I just want to make sure its not my camera and just a bug in the build. 
Title: Re: Canon 700D / T5i
Post by: whitep on June 04, 2015, 12:08:09 PM
Aaaaaaalllrighty...

I took the time and read all of the 30 pages of this thread. Its huge and I think im ready to go.
There are just some little questions I have left (just because I am a little coward, sorry for that):

a) have several SD cards: to use all of them with ML I have to go through the install procedure for every single card, right?
--> what happends if I insert a non ML SD Card after I used to?
b) If I have installed 'Nightly Build A' and want to upgrade to newer 'Nightly Build B' what are the steps (formatting SD Card? Go through new installation?)
c) What is the recommended way to update from ML 1.1.3 to Canon 1.1.4 (and maybe later to ML 1.1.4)
d) If my batterie is low and a few hours outside of cam for charging, do I have to 'reinstall' ML via Firmware Update or is it still active after inserting the batterie?

Thanks for your effort guys. Thats insane what you did.
Title: Re: Canon 700D / T5i
Post by: FILTHYbrowncow on June 04, 2015, 03:33:17 PM
Quote from: whitep on June 04, 2015, 12:08:09 PM
Aaaaaaalllrighty...

I took the time and read all of the 30 pages of this thread. Its huge and I think im ready to go.
There are just some little questions I have left (just because I am a little coward, sorry for that):

a) have several SD cards: to use all of them with ML I have to go through the install procedure for every single card, right?
--> what happends if I insert a non ML SD Card after I used to?
b) If I have installed 'Nightly Build A' and want to upgrade to newer 'Nightly Build B' what are the steps (formatting SD Card? Go through new installation?)
c) What is the recommended way to update from ML 1.1.3 to Canon 1.1.4 (and maybe later to ML 1.1.4)
d) If my batterie is low and a few hours outside of cam for charging, do I have to 'reinstall' ML via Firmware Update or is it still active after inserting the batterie?

Thanks for your effort guys. Thats insane what you did.

A) Yes, you need it on each SD card you plan to use.  If you insert a non ML SD, then you have a regular t5i (or whatever canon you have)
B) replace the old contents with the contents from the new build
C) completely format your card and install canons firmware
D) Your batteries shouldn't affect ML.  ML is present as long as a memory card with the correct ML is on the card. 

Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 04, 2015, 06:15:19 PM
C: Uninstall cameras bootflag by running firmware upgrade. After timeout restart your cam and format card.
Title: Re: Canon 700D / T5i
Post by: whitep on June 04, 2015, 11:01:23 PM
Thanks to both of you guys. And thanks Walter. By reading those 30 pages I know you
are a really helpful person and try to get people help and advice and the FAQ  ;D.
But just to make clear the Canon Firmware Update should be on a non ML SD Card right?

And again

a) To get it on every SD card I have to do the install procedure for every card
(put ML Files on SD, plug into 700D, start FW Update)?

b) On my PC I just copy and paste/overwrite the 'new content' AND do the install
procedure (FW Update on EOS)?

Thanks  :) and I swear I'm done asking. I feel sorry.  :-[
The next time I'll post here will be to say thanks for those answers and that it
(hopefully) runs perfectly on my EOS.  ;D
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 05, 2015, 04:13:27 PM
Quote from: whitep on June 04, 2015, 11:01:23 PM
But just to make clear the Canon Firmware Update should be on a non ML SD Card right?

Nope. Canon firmware doesn't affect bootflag and there is no timeout updating Canon's native firmware.

Quote from: whitep on June 04, 2015, 11:01:23 PM
a) To get it on every SD card I have to do the install procedure for every card
(put ML Files on SD, plug into 700D, start FW Update)?
Installation Guide.

Quote from: whitep on June 04, 2015, 11:01:23 PM
b) On my PC I just copy and paste/overwrite the 'new content' AND do the install
procedure (FW Update on EOS)?
Sorry, no idea what you're trying to do in b).


Title: Re: Canon 700D / T5i
Post by: whitep on June 05, 2015, 11:05:24 PM
Thanks for your advice Walter  :)

QuoteSorry, no idea what you're trying to do in b).
It's reffering to my original question b up there:

QuoteIf I have installed 'Nightly Build A' and want to upgrade to newer 'Nightly Build B' what are the steps (formatting SD Card? Go through new installation?)
and FilthyBrownCow answered:

Quotereplace the old contents with the contents from the new build
.
So just delete the ML stuff from SD card (with help of a PC) and 'copy/paste' or 'overwrite' existing files.?

Edit & BTW: I successfully installed ML on my 700D  8) . I saw some videos from 1 to 2 years ago and seeing an audio
menu but it is not present on my menu (I'm using the latest nightly).
Title: Re: Canon 700D / T5i
Post by: FILTHYbrowncow on June 06, 2015, 07:09:56 AM
Is anybody else experiencing magic lantern timing out after 5 seconds when you're in live view? 
Title: Re: Canon 700D / T5i
Post by: whitep on June 06, 2015, 12:12:59 PM
No, but I had another problem.
I wanted to delete the pictures on my card and formatted it
with active option 'keep ML, format card'. And turned off the
cam.

After booting (normal, no complications) ML was gone.
I took the card out and plugged it into my pc. ML files were
still on card. Any advice?

Edit: I just reinstalled it normally and it is working again with
the old settings I allready did before.

Do I always have to format format with low-level option?


Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 06, 2015, 12:21:40 PM
Seems like card got unbootable. This shouldn't happen. Run firmware update from Canon's menu.
Try to reproduce.
If able shoot a video about your issue. Quality doesn't matter here. And add some details about the card you used: Size, file system used and of course which nighty build version.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 06, 2015, 12:49:51 PM
@whitep: Installation Guide + https://builds.magiclantern.fm/#/features
Title: Re: Canon 700D / T5i
Post by: whitep on June 06, 2015, 12:59:22 PM
Ok so it happends while formatting the card (option keep ML set) no matter if low level formatting is activated or not.
While the screen says restoring ML Stuff the screen goes off and that seems to cancel something and
ML is gone afterwards. I dont know why but it seems to be connected with the screen going off?
By the way. While reinstalling it says Bootflag allready set if thats something important.

I'll reinstall it and will delete the pictures manually via pc without formatting an longer for now.

Details:

Camera: Canon Eos 700D
Firmware: magiclantern-Nightly.2015May03.700D113, Canon 1.1.3
SDCard: Kingston SDHC 8GB class 4 (I know, not optimal) but I think thats not the problem.
SDCard: uses FAT32 and contains DCIM, MISC, ML, 700D_113.fir, AUTOEXEC.BIN

I did bracketting for a HDR via ML: 9 shots, set the darkest pic up and used 0 + ++
Than I formatted the card (option keep ML set) one time without low level
--> Result: while 'Restoring ML Stuff' LCD goes off. LED stopped blinking. ML was gone.

I reinstalled ML (files were still on SD)
I did again bracketting for a HDR via ML: 9 shots, set the darkest pic up and used 0 + ++
Than I formatted the card (option keep ML set) one time with low level.
--> Result: while 'Restoring ML Stuff' LCD goes off. LED stopped blinking. ML was gone.

EDIT: I have done everything in the installation guide as described there. What should the
features tell me? Where do you think the problem is from?

EDIT²: I feel pretty dumb now. I formatted again but this time I checked the camera's
'Auto Power Off' which was set at 30 seconds. I changed that to 3 Minutes and guess what
happends. I saw the message that it was successfully restored. I dont delete my text so
other people can read that just in case they haven't change that Auto Timer.

Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 06, 2015, 01:25:47 PM
No, I think it's something which may have to be taken care of.
@devs: Is it possible to dissable powersave during this operation?
Title: Re: Canon 700D / T5i
Post by: whitep on June 06, 2015, 01:33:00 PM
QuoteNo, I think it's something which may have to be taken care of.
@devs: Is it possible to dissable powersave during this operation?

Yeah I think it was definitly the Power Saving. At least with that slow card.
Maybe it is no problem wit h class 10 so 30 may be enough than.
Title: Re: Canon 700D / T5i
Post by: whitep on June 08, 2015, 12:47:23 PM
Sorry for the double Post but I wanted to add something:

I ordered a new SD Card 'Transcend Ultimate-Speed SDHC Class 10 UHS-1 32GB'.
Its using the maximum read/write of the EOS 700D which supports UHS-1 (as far as I know).

Disabling powersave just seems to be worth if someone is using a very slow card (as I did before)
and did not change the default power saving option (Auto Power Off = 30Secs). On slow cards
the restoring just takes more than 30 seconds.

The new card what so ever did the whole format/restore in a few seconds so it does not matter
if the 'Auto Power Off' is 30 secs or longer.

Instead of the devs disabling Power Off while the restore process is active it would be enough to
add the info in your install guide when using old cards i.e. set Auto Power off to 3 Minutes to prevent
incomplete restoring = Magic Lantern gone.

I hope it was somehow helpful even if most people wont buy or use such an old card any more.


Thanks for your help, as usual.

Title: Re: Canon 700D / T5i
Post by: Nihal196 on June 15, 2015, 10:14:40 PM
I'm curious, is the T5i able to record RAW in 1080P or is it limited to 720P? If anyone could help guide me or share some of their settings for shooting raw video that would be great, thanks!
Title: Re: Canon 700D / T5i
Post by: fatemperor on June 21, 2015, 09:16:05 AM
Hi Nanomad

I'm new to this and buying a 700d today (I think) - want record interviews and seminars, ideally 60-80 minute stretches (just want good visuals, sound recording only needed to sync the sound recorded with my separate device..).
I've been looking up Magic Lantern a bit and I notice that nightly builds have the 1.1.4 version only available. Presume the 700d I'll get will have F/W 1.1.4 - so the quick question is: what are the pitfalls to buying a 700d today and throwing ML 1.1.4 on it? If stability issues, can I bring the new 700d back to 1.1.3, and put ML 1.1.3 on it maybe? Again just want to video indoor talks etc and will probably buy canon 1.4 / 5omm lens for this - not too worried about deep tech stuff... Thanks in advance  :)

Best
Ivor
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 22, 2015, 03:05:59 PM
You may ask Canon.
Title: Re: Canon 700D / T5i
Post by: jofreled on June 22, 2015, 03:56:39 PM
Hello, I´ve got a problem, that after installing the newest ML from 20. June, the RAW video option doesn´t show on my 700D.. Any suggestions what would fix that?? I have read your Q/A and tutorials but I couldn´t find anything about 700 D..

Anyways, the whole ML works great but RAW video option.

Thx for soon reply
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 22, 2015, 03:58:03 PM
Modules tab.
Title: Re: Canon 700D / T5i
Post by: jofreled on June 22, 2015, 04:09:01 PM
Could you just please send me a link to file, which should I paste to the module folder? I can´t manage what to download from the forum.

Many thx.  Btw, i have a Sandisk Extreme 95 MB/s card
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 22, 2015, 04:14:25 PM
It's all there. No need to mess up with files and directories.
http://www.magiclantern.fm/forum/index.php?topic=11269.msg109594#msg109594

700D's SD-card interface is limited to about 41 MByte/s writing.
Title: Re: Canon 700D / T5i
Post by: jofreled on June 22, 2015, 04:16:28 PM
Allright, what would you suggest? raw or mlv rec?

But it´s kind of funny because I have recently checked my SD card and in the modules folder I have either raw_rec.mo and mlv_rec.mo.. So I don´t get it, where is the problem
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 22, 2015, 04:35:02 PM
"Modules tab" as in Modules screen as in Modules menu as in Modules board. Modules have to be activated before using. Do not mess with files and directories until you know what you are doing. Read linked user guide (work in progress, though).

Try running MLV. 700D will be able to record 720p24. Recommended: ExFAT file system on card.
Title: Re: Canon 700D / T5i
Post by: FILTHYbrowncow on June 23, 2015, 05:06:17 PM
Does anybody else get timed out of the ML menu if you access it from LiveView mode?
Title: Re: Canon 700D / T5i
Post by: mferretto on June 24, 2015, 01:46:05 AM
Hello there!
I've this camera and I decided to try ML (first time for me)

I followed thoroughly your instructions:
* I updated the firmware to 1.1.4
* I installed the new version of ML for 1.1.4.
Everything seems to work fine, the installation looks successful...

But when I restart the camera the only thing about ML I can see is this little sencence here at the bottom left

(http://i.imgbox.com/uXvgnvRL.jpg)

for the rest the MENU of the camera is exactly as before and I see no trace whatsoever of the ML presence...
What am I doing wrong?
Thanks!
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 24, 2015, 01:48:08 AM
Quote from: mferretto on June 24, 2015, 01:46:05 AMWhat am I doing wrong?

Not reading user guide, I guess.
Title: Re: Canon 700D / T5i
Post by: mferretto on June 24, 2015, 01:52:04 AM
Looks like I missed "Press ERASE button to bring up the Magic Lantern menu."
First time for me, just like I said...
Sorry ;)
Title: Re: Canon 700D / T5i
Post by: victor955 on June 26, 2015, 07:03:34 AM
Today I just Insall ML in my Canon 700D v1.1.4 with latest Build of ML. I am trying to create HDR video but there is lots of flickering appears in screen and output too.

Need Help how to use this in 700D.

Thanks
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 26, 2015, 08:27:13 AM
HDR video has to flicker because it will use alternating exposure settings. Remove flicker in post-processing: http://www.magiclantern.fm/forum/index.php?board=14.0

Title: Re: Canon 700D / T5i
Post by: victor955 on June 26, 2015, 08:42:47 AM
Thanks Walter,

I got another Error while recording movie "Skipping Frame, Movie recording Stopped automatically"

What is this?


Thanks
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 26, 2015, 08:49:14 AM
You may want to use search first.
Title: Re: Canon 700D / T5i
Post by: Circuitbrkr on July 04, 2015, 08:08:51 AM
I'm new to ML to the point that I haven't installed it yet on my T5i.  I mainly am interested in it because I want to monitor audio with headphones while shooting. That makes be totally unique, I know - but I haven't found a direct answer to this, except that it *seems* it should work (without introducing a video monitoring problem), I just want some assurance before running a major change on the camera (my wife uses it too!).
I found out about ML through a YouTube video of a guy showing his setup of using the Canon USB AV cable into a headphone amp to his headphones (must be high ohm - sounds like low ohm phones will work without an amp).  I saw some comments about the Live View screen not having video when you do this - but he was using an external Lilliput monitor.  I just want to use the built in LCD - normal Live View.

So finally the question (sorry - it will maybe end up on "duplicate question" but...) if I install ML and use the Canon A/V cable (proprietary mini USB to RCA) feeding that with an adapter into headphones; will I still get video on the built in LCD on the camera?

Thanks very much!
Title: Re: Canon 700D / T5i
Post by: axelcine on July 04, 2015, 06:06:43 PM
Circuitbrkr - I use my t5i extensively for movie making (NOT documentaries or ENG!) and sound is critical to me. Last autumn I was in Sicily, recording a local brass band for a few hours. I used an external microphone with a memory card - and I used the built-in mikes for sync. In the end I used the sound from the built-in mikes. It was crisp, naturally beautiful. I have never had so much good sound from camera mikes before. You'll have to rehearse sound rendition - acoustics in your environment may be disastrous, and then you use your external mike and post-process the sound in Audition, Sound Booth, Audacity or whatever you use. Train with your gear. Don't be sloppy. Rehearse over and over. Camera work isn't to be taken lightly; after all it is a profession which demands a long education. Learn to know your camera by heart, before you install ml. One step at a time. You'll not want 100 new functions until you have a grasp of the original Canon software. And PLEASE consider Canon's 10-22 f3,5 wide ange for larger forums instead of a narrow-eyed 50mm (80mm in reality - your chip is aps-c!) whis is a fantastic lens for portraits but rather hard to keep focused at f1.4 (unless you have ml, of course, whose follow-focus is formidable.) The wide angle lens also brings your camera much closer to the action, which improves the sound considerably. In ml you are able to monitor sound via two sound bars on top of the screen - and it works very well in combination with Canon's built-in mike adjustment system.
I spent a long time using my beloved t5i, before I installed the ml. My girlfriend uses the camere almost as much as I do, and she's completely in love with ml.
Remember the recording times: ~29 minutes for each movie file. Use natural breaks in the show, you're capturing, stop and restart the camera - at the same time checking space and battery left. Don't ever leave the camera unattended.
Good luck and the harder you work, the more you'll appreciate the results.
Title: Re: Canon 700D / T5i
Post by: wicq on July 07, 2015, 04:27:26 PM
Is there any  advantage in using firmware .114 and the latest ML build? i mean is there anything new in comparison to the firmware .113 and the lates ML build for .113 firmware?
Title: Re: Canon 700D / T5i
Post by: mk11174 on July 07, 2015, 07:15:53 PM
No other then when tweaks are made to the nightly in the future, you will need 114 to have them available on your camera. But 113 and 114 work the same, nothing any better or worse about it.
Title: Re: Canon 700D / T5i
Post by: emmettfitz on July 13, 2015, 12:54:51 PM
I need more control over audio and thought magic lantern was the answer. FYI!!! ML does not have the AUDIO CONTROL feature with the 700D/T5i. I installed ML yesterday and realized there was NO AUDIO tab at the top menu. I looked on their user guide and saw, "Magic Lantern has no audio controls for Canon 600D/T3i and newer cameras".
Title: Re: Canon 700D / T5i
Post by: axelcine on July 13, 2015, 02:11:26 PM
emmettfitz - 700d has some audio control built in. You are able to set audio recording levels (see Canon User Guide p.198) but there is no audio jack for monitoring audio while recording. For an old rat like myself with 20+ years of experience with audio recording and TV production, the audio-recording meter ML displays on top of the display is by far good enough - and I record all important sound on a separate audio recorder as well (or use wireless mics/ext.mic jack on the camera). While recording you can't change recording levels anyway, so you'll have to do a few test shots and adjust audio accordingly. As I wrote in post above, the quality of sound from built-in mics is astoundlingly good under the right conditions.
Optimal sound control requires an audio mixer - there are several that fit in the hotshoe - that accepts separate or wireless mics. Nevertheless, separate audio recording and then using camera sound for sync is generally the best solution - and that goes for all cameras in the world.
Play with the camera - that's what it's made for. With or without ML it'll outperform many other cameras, if you have an intimate knowledge of its functions. An old journalist and editor such as myself is happy for ML - it resolves a truckload of issues.
Title: Re: Canon 700D / T5i
Post by: pkindt on July 19, 2015, 08:38:30 PM
Dear all,

since i do a lot of studio shoots with my 700D, i found it inconvenient that i could not trigger an external flash in LiveView.

I activated the feature of ML that on exposure quickly leaves the LifeView-mode, triggers the flash and returns.

If the trigger button is pushed completely, the feature works without problems. However, when i half-press the button,  the system leaves live-view and then freezes.

I am going to go through the code and fix the issue on the next weekends. Does anybody from the developers have an idea what could be the cause?

Best regards

Philipp
Title: Re: Canon 700D / T5i
Post by: Felipe on July 20, 2015, 09:09:04 PM
Great if you can do that.
By the way where in the menu is located that feature ?
Title: Re: Canon 700D / T5i
Post by: mentos on July 20, 2015, 09:46:51 PM
I turned on ETTR, Autoexpo and defilck after that the live view did not work properly anymore. I have updated the firmware and uninstall the ML and the bootflag of the camera , but not resolved . The live view is not more adjusting with the camera settings, exposure is changing even automatically without the ML in manual mode. What I do?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on July 20, 2015, 09:54:34 PM
. Remove battery. Format card in cardreader. insert battery. Reset cam to factory defaults (including C.Fn settings)l Remove battery. Reinsert battery and card and retry. Report results
Title: Re: Canon 700D / T5i
Post by: pkindt on July 20, 2015, 10:43:51 PM
Felipe, it is not in the menu unless you change the source code.
Title: Re: Canon 700D / T5i
Post by: Felipe on July 20, 2015, 11:01:30 PM
That is the feature a dream with
Title: Re: Canon 700D / T5i
Post by: mentos on July 22, 2015, 01:23:06 AM
Walter Schulz

I'll try it, but I already formatted the card ( in the camera) and I did the firmware update to 1.1.4 . ML reinstalled, but still the same with or without ML.

Tks in advance.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on July 22, 2015, 01:37:40 AM
Format card in cardreader, format in cam after. Reset cam to factory defaults (including C.Fn settings). Report results.
Title: Re: Canon 700D / T5i
Post by: mentos on July 22, 2015, 06:42:53 PM
Walter Schulz

Great!
Works fine now.
Tks a lot.

Title: Re: Canon 700D / T5i
Post by: Gavin Morrisson on July 24, 2015, 03:28:37 AM
Hello Everyone...

Maybe this is a silly question, but I have not been able to get any HDMI out on the Rebel T5i. I was using a nightly build with firmware 1.1.4.

Any ideas?
Title: Re: Canon 700D / T5i
Post by: zilvis310 on July 28, 2015, 11:16:32 PM
hey boys and girls i got a problem with importing ML to my sd card any idea how to fix it? http://imgur.com/a/qVzQ9
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on July 29, 2015, 12:20:14 AM
Format card in cam and retry.
Title: Re: Canon 700D / T5i
Post by: zilvis310 on July 29, 2015, 05:20:31 PM
doesnt help ;/
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on July 29, 2015, 05:45:06 PM
You have to use cardreader or SD-card slot to transfer files to card.
Title: Re: Canon 700D / T5i
Post by: Datadogie on July 30, 2015, 12:53:50 AM
http://wiki.magiclantern.fm/install
Title: Re: Canon 700D / T5i
Post by: IBIRRU on August 03, 2015, 07:51:59 PM
Hello everyone!
I've just buy a 700D and installed ML.
Until now I experiment ML using an old 500D and compiling myself.
I use ML mainly for astrophotography.
I ask you about the FPS OVERRIDE function.
In my submenu I don't find the "High FPS" option -- High FPS - changes FPS without altering shutter speed and allows a slight overcranking (60D, 600D).

Is This function only for 60D and 600D? :-[

Thanks
Title: Re: Canon 700D / T5i
Post by: mentos on August 06, 2015, 08:58:20 PM
I really like to have the headphone monitoring working in T5i . I am willing to create whatever it takes to make it happen . where should I start?
Title: Re: Canon 700D / T5i
Post by: dmilligan on August 10, 2015, 05:46:33 PM
Quote from: mentos on August 06, 2015, 08:58:20 PM
where should I start?
Are you familiar with C and/or ARM assembly?

No:
start here -> Embedded Systems & Development [LEARNING] (http://www.magiclantern.fm/forum/index.php?topic=7013)

Yes:
Getting started with development  (http://www.magiclantern.fm/forum/index.php?topic=991.0)
Getting a development machine up and running and developing.  (http://www.magiclantern.fm/forum/index.php?topic=9517.0)
Tutorial: finding stubs  (http://www.magiclantern.fm/forum/index.php?topic=12177.0)
Easy Coding Tasks (http://www.magiclantern.fm/forum/index.php?topic=9625.0)
https://bitbucket.org/hudson/magic-lantern/branch/new-sound-system
Title: Re: Canon 700D / T5i
Post by: Boothmeister on August 10, 2015, 09:48:38 PM
Hi. Looking for a little assistance if possible?

I'm trying to install Magic Lantern for my Canon 700d but can't seem to do it?

I'm currently running software v.1.1.4 and I've completed the SD card format in camera, placed it in my PC and downloaded the ML files from the site. It says to copy over the ML folder ONLY which I have done. When I then put the SD card in the camera, on <P> mode and try to update the firmware it just says that there is no firmware on the card?
I've tried copying the ML folder as a ZIP and extracted but get the same result.

Am I doing anything glaringly obvious?

Thanks, Chris
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on August 10, 2015, 09:58:49 PM
Sorry, where did you find the instruction to copy ML folder over only? This is just wrong. You have to copy extracted contents to card. Autoexec.bin, *.fir and (of course) ML directory with all sub-directories and files within!
Title: Re: Canon 700D / T5i
Post by: Boothmeister on August 11, 2015, 12:36:45 PM
Just on the download page? Maybe I've just misinterpreted the instructions? Will try copy everything over and see if that works.

Ta very much.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on August 12, 2015, 06:36:49 AM
No, you just haven't found the modules tab.
Please toggle screens.
Title: Re: Canon 700D / T5i
Post by: mentos on August 12, 2015, 03:03:12 PM
thanks dmilligan
Title: Re: Canon 700D / T5i
Post by: wicq on August 12, 2015, 09:39:54 PM
Hi, i dont know what the hell is happening, but some weeks ago i could record  9 seconds of mlv and 11 seconds of raw 1 at 1728x736 using a 32gb kingston card, today i can only record 3-4 damn seconds, what the hell has  happened?, using latets ML latest build for 1.13 firmware, i havent change any settings, i actually restore ml and canon setting but before restore it was worse, only 2 seconds, like when using a fucking  cheap card, help please
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on August 12, 2015, 09:43:18 PM
Format card inside cardreader with ExFAT file system. Use EOScard/Macboot to make card bootable, wipe all files and directories from card and copy extracted nightly build contents to card.
Retry.
Title: Re: Canon 700D / T5i
Post by: wicq on August 12, 2015, 09:58:43 PM
Walter Schults, thanks bro for the tip, but it was my fault. I let the res at 720 30fps and then in the middle of a mental  breakdown cause im mentally ill :P I change to 1080 30 fps . the 11 secs and 9 secs  for raws  can be done at 1080p 24 fps so it works as  before now. Damn I erased cinestyle profile, i Have to reinstall it again, but is cinestyle profile(or any other flat profile)  make any difference when recording in raw? Thanks again Walter for the quick  help :D
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on August 12, 2015, 10:04:46 PM
Picture styles are for JPEG/H.264 only. RAW stills will "use" picture styles in Canon DPP but it's just sliders moviing up/down or left/right. And embedded JPEG will get generated in cam using picture style.
Title: Re: Canon 700D / T5i
Post by: rickmc3280 on August 15, 2015, 08:06:43 PM
Hi, This is my first post and I've been learning programming and arduino outside of anything to do with the T5i, but what I was wondering when messing with these projects is if it is possible to get higher quality video from the camera trying either of 2 different things. 

1. Have an SD adapter kind of like the wifi cards that streams the data to a nearby receiver or
2. Using Magic Lantern to stop the processor from writing to the SD card and instead focus on sending the video to the HDMI out as a type of clean HDMI out. 

From my rudimentary understanding of the problem with these processors is that they overheat with 4K video after so long, so what if we could somehow stop the processing because the heat is created when electricity flowing for whatever functions.  I have always thought that more processing power was needed for the conversion of the video in its larger format and encoding it.  Is it possible at this point to drop the encoding for 4k and just do an output and use less resources or does it use more because the amount of data its transmitting? Is it possible to eliminate a heat source?  Any thoughts?

Regardless, I was wondering if anyone had any particularly great experience with getting 4k Video from the T5i or any workarounds for clean video yet?

Is RAW video larger and downscaled or is simply more data that is unprocessed?

Are there any plans to update the T5i ML files anytime soon?

To add:

I do realize that ML has RAW video and other video settings/compression settings, and I've used it, but it froze up my camera so I removed it, but I cant help but want to add it back again now that I have an external mic and can eliminate that as a possible data throughput problem.  My biggest concern is what is the safest alternative for getting 4K video from the T5i without damaging the camera based on yalls experience.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on August 15, 2015, 08:13:13 PM
SD-card interface in 700D is limited to about 41 MByte/s in write mode.

- An adapter to external storage will have to be connected to this very interface -> No enhancement
- Reprogramming SD-card interface/HDMI interface is outside ML's scope (not messing with Canon's IP) and/or - at time of writing - way beyond todays knowledge about how the cam works.

EDIT: Overheating is not a big issue with 700D but data streams are. Do the math:
Horizontal pixel * vertical pixel * bit depth * frame rate / 8 = Byte/s
Example:
1280 * 720 * 14 * 24 / 8 =  38707200 Byte/s -> About 37 MByte/s
Or use rbrune's calculator: http://rbrune.github.io/mlraw/

And there is always moiré/aliasing in non-crop mode without additional filters.

Title: Re: Canon 700D / T5i
Post by: rickmc3280 on August 15, 2015, 10:23:23 PM
Thank you for putting it in perspective in regards to raw data stream and SD card write out. 


Guess its better to purchase the quality you want instead of hacking/modifying it sometimes. 

At such a low resolution I would have figured raw output would not be a problem without needing encoding... technically its not, but its on the top end and thats assuming peak efficiency/no errors of the data stream.

Thanks again!

Title: Re: Canon 700D / T5i
Post by: IBIRRU on August 16, 2015, 09:53:53 PM
Hello everyone,
I try to knows better the ML option on 700D.
I experiment with "Movie crop mode" option on MOVIE tab.
I found (probably you know before that) that it took movie exactly 1720x979 expanded digitally to 1980x1088.
This is just a mere 10% and if you increase the CBR factor to reduce the compression you get a good 8 bit MOV video ready to use and without pink/blue dots.

Why in this 1.1:1 pixels crop mode we don't get pink/blue dots? The little (10%) interpolation cancel them? :-\

I will ask the same in the Pink Dot Remover thread

Title: Re: Canon 700D / T5i
Post by: nikfreak on August 16, 2015, 10:02:26 PM
http://filmkit.net/posts/show/4495/why-the-3x-crop-mode-on-the-canon-600d-is-invaluable?message=cineblah
https://www.youtube.com/watch?v=AixwZupTyeA

Digital Zoom 3x is very useful!!
Title: Re: Canon 700D / T5i
Post by: pkindt on August 17, 2015, 11:10:51 PM
Dear all,

i solved the problem with the external  flash in live view freezed the GUI. It works flawless now. It required only small modifications to the ML code.

Could one of the developers kindly contact me and tell my how i get the code into the repository such that everybody can use it? I never contributed to ML, yet.

Best regards

Philipp
Title: Re: Canon 700D / T5i
Post by: nikfreak on August 17, 2015, 11:23:42 PM
Hey pkindt. You should create pull request on bitbucket:

https://bitbucket.org/hudson/magic-lantern

https://confluence.atlassian.com/display/BITBUCKET/Work+with+pull+requests

http://www.magiclantern.fm/forum/index.php?topic=9524.0

If you get stuck then let us know...
Title: Re: Canon 700D / T5i
Post by: Felipe on August 18, 2015, 01:26:43 AM
wow Philip is like Felipe, You got it
Title: Re: Canon 700D / T5i
Post by: pkindt on August 19, 2015, 11:24:34 PM
Thanks Nikfreak. I will open a pull request at the weekend.

Best  regards

Philipp
Title: Re: Canon 700D / T5i
Post by: mk11174 on August 27, 2015, 02:07:07 PM
Hi, was curious on your tweak to the code in fixing this live view freeze issue on the 700D, can you share what you found? I am the one who ported this model so am curious on any fixes found of course? Thanks!
Title: Re: Canon 700D / T5i
Post by: lorenmstuber on September 09, 2015, 05:15:52 AM
Hi all.

I know audio monitoring is a highly requested feature and already supported on some other Canon models.

Sorry, this has probably been asked before, but is it possible to have the feature ported onto the 700D? If so, is anyone currently working on it?
Title: Re: Canon 700D / T5i
Post by: axelcine on September 21, 2015, 07:59:12 PM
Dear lorenmstuber and all you out there wanting to monitor audio on your Canon jewels...
Recording sound with the built-in mics is very rarely an option, only usable in very controlled acoustic environments. I did it once in Sicily, where the conditions were prime-class-A-super-deluxe.
A much more safe approach is to record the sound with an external mic such as the MyMyk or the various models from Zoom – there are many equally excellent options from many manufacturers out there,
For simple sound recordings I use a Sony IC Recorder ICD-UX71 with a good headset – and connect its headset-out to the camera mic-in. This little setup works without a flaw – and it cost me less than $100:
Sony ICD/Headset-Out > Canon 700d Mic-In via 3.5mm jack splitter (2xfemale > 1 male).
Sony ICD/Headset-Out > Headset via 3.5mm jack splitter (2xfemale > 1 male).
Sony ICD/Mic-In > Any microphone with 3.5mm jack, here with 12 feet of cable.
The shotgun mic may be fixed to the camera with the Sony ICD/Headset combo, and – voila – we're recording monitored audio! The Sony ICD records the sound at the same time as the camera, but (normally) with higher fidelity, and the recorded sound may be post processed in any audio editor. During the recording, ml's audiometer works as an extra means of control. The camera-recorded sound may serve as a sync.
A lot of us indie-video-nerds are on a budget – that's why so many of us are interested in constructing sort-of an "audio out" on our 700d (650d, 70d etc.) But sound is 80% or even more of the video or movie experience, so... please NO SHORTCUTS HERE. Even my little experimental setup works lots better than the built-in mic whenever the acoustics are less than ideal.
I have been sitting on my hands since Sep 9, when you posted your question, waiting for a reply from the real experts, the hardcore ml users. Many posts in this and other threads confirm my point of view.
- https://forums.creativecow.net/thread/325/2221
- http://www.dpreview.com/forums/post/52328221
- http://www.dvinfo.net/forum/canon-eos-crop-sensor-hd/488735-whats-best-way-monitor-audio.html
And even with more pro cameras like the 5dIII the built-in mic doesn't always deliver the optimal sound. Why? Because the built-in mics are never at the exact spot, where the sound is made. You may zoom in on a situation with your lens, but there is no way to zoom in the sound with the built-in mic – if you "zoom" (amplify) the sound - turn up the gain - you amplify background noise as well. Unprofessional!
Ml is in fact very helpful when recording sound with (the built-in mic, RARELY), or an external (shotgun mic, a wireless or a cabled) close-up mic placed right where the sound is created. When recording your video you have two sound bars on top of the lv screen, and with a little bit of exercise you are in fact able to monitor the sound. Using something like my little setup just makes the task easier.
But let's try with an example: You're at a family function, and Uncle Bill is holding a speech. Put the external (wireless or cabled) mic right in front of him. Or put a small dictaphone like my Sony in his breast pocket. Third option (and third quality) is a shotgun mic on the camera held as close to Uncle Bill as possible to avoid the clatter from the silverware or the burping of the quests. The last and worst option is the built-in mic. If you can place the camera 2 or 3 feet away from Uncle Bill you may get an acceptable recording. With the camera further away the sound deteriorates with the distance squared.
I got my first camera (Nikkormat FT) in 1966, became a photo journalist 1981, was an international radio reporter 1994-2004 and a film producer with DR, the largest Danish radio/tv broadcasting organization 2004-6. Today I teach photo and cinematography. When I compare the equipment we had back in '04-'06 with Canon's excellent cameras combined with ml, we have certainly come a far way. Please - don't make a mockery out of present-day video production by making crappy sound.
Title: Re: Canon 700D / T5i
Post by: axelcine on September 24, 2015, 06:15:11 PM
I got the idea, that you'd want a picture of my "sound system" setup, so...
(http://s19.postimg.org/iy7xs9l5f/Audio_Gear_Crop_JPG.jpg)
Title: Re: Canon 700D / T5i
Post by: axelcine on September 24, 2015, 07:51:32 PM
BTW - I have several SD-cards with ML. When I change settings, the changes are - of course - only stored on the card, I currently use. So in order to copy the settings to my other cards, I place the "changed" SD-card in my card-viewer, open the ML folder and copy the SETTINGS folder to my computer. Then I copy this folder to the right folder in all the other SD cards. This way I make sure, that my settings are the same, no matter which card I use. Piece of cake.
Title: Re: Canon 700D / T5i
Post by: DeafEyeJedi on September 25, 2015, 05:34:56 AM
I actually like this set-up in your photo ... Plan on trying your idea soon on my Cameras and Thanks for sharing @axelcine!
Title: Re: Canon 700D / T5i
Post by: Dolrak on October 08, 2015, 01:09:54 PM
Hello everyone,

I'm new here and I havn't had the time to check all the topics yet but from what I've been able to gather, no one has spoken about ML and Canon's 'new' release the 760d? I've purchased a 760d recently and I was wondering if it was possible to mount Magic Lantern on it. If anyone has any information regarding this I'd appreciate very much.

Thanks in advance!
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on October 08, 2015, 01:17:11 PM
No. Not possible. Act like there will be no ML version for this cam ever.
Title: Re: Canon 700D / T5i
Post by: Felipe on October 08, 2015, 02:43:20 PM
760D has a very low bitrate like half of previous models, a more compressed audio codec , in other words 760D is a downgrade to the 700D  >:( :(
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on October 08, 2015, 02:59:04 PM
Don't know which "bite" rate you are referring to. SD-card interface is good for 70+ MByte/s, though.
Title: Re: Canon 700D / T5i
Post by: Felipe on October 08, 2015, 03:11:44 PM
T5i : 1920 x 1080 (30 fps*1/25 fps/24 fps*2): 330 MB/min.
760d : Standard: 1920 x 1080 (30 fps/25 fps/24 fps): 216 MB/min.

Besides now it has acc codec for audio,
o yes is 50% drop in bitrate.
Title: Re: Canon 700D / T5i
Post by: axelcine on October 08, 2015, 04:09:13 PM
Hi again - I bought a 760d recently, and I love it. BUT... I'll never leave my 700d at home. With ML it's an outstandingly good workhorse, and with my VH4 Viewfinder it's a jewel to work with.
I use my 760 for an enormous lot of photography, HDR, street phot, portraits, you name it. But video work is always done on the 700d. If I'd need a #2 cam with ML, I'd go for a 70d. It has almost the same features as the 760, but Canon didn't tamper with the bitrate - and we have a perfectly good ML for it.
Rewriting ML to suit the 760 would be a nice passtime, but since the camera obviously is a bit downgraded on the video side, one would fare better with the 70d. As I said, I love the 760d, but I'm very realistic about what it can and what it can't do.
And to be honest... I have used it as my b-cam, using Canon's own video settings. For quick-and-dirty jobs it's actually quite okay. Maybe Canon stepped the 760d a little bit down to allow room for the 70d?
My advice to budding vidiots like myself is to consult the ML forums before buying a new cam.
Title: Re: Canon 700D / T5i
Post by: Speedping on October 08, 2015, 07:52:51 PM
Hey, I started using ML and I love it. It really helps focus my old manual prime lens. I only have one problem: Zoom Peek is all jerky and keeps chopping all the time, it's really distracting. Is it a known issue? Can it be solved? Thanks!
Title: Re: Canon 700D / T5i
Post by: ShootMeAlready on October 09, 2015, 03:27:13 PM
"Regardless, I was wondering if anyone had any particularly great experience with getting 4k Video from the T5i or any workarounds for clean video yet?"

I think we need a a new thread on clean outs, as the solution for all rebels is the same. Its the same for 7D, 6D, 5D, 5DMKII, 70D.
- If you plug an HDMI cable in the LCD goes blank!!! What a mess JMHO.
- You will want a display. you can plug in a usb cable and use a PC/EOS utility or Android/DSLR Controller app. Through the usb display you can still control the camera, see its picture and set AF.  Note the Android solution, means you could use your phone!
- If you just want to manual focus your live stream, this is easy you dont need Magic lantern.  Select Live View focus, and put the lens in MF.  If you cycle through INFO, you should find a clean display.
- If you want to AF, you'll need Magic Lantern.  The feature set: select global draw off, select arrows off, and set clear overlays to "always".  This will get you clean HDMI out, and retain AF (which is set on your USB display/software).
- Now plug in a special cable which is (micro) hdmi, and hdmi to your hdmi recorder of choice.  I like Hauppage HD PVR II, with a laptop.
- Now you can live stream HDMI to a hard drive.
- Now the cool part is that HDMI streams 4:2:2 compression!!!  where as H264 is only 4:2:0. 
- Now the very uncool part is that Canon lames most models except for 5DMKIII, 7DMKII.  So you cant get 1080p straight out.  You can stream 720p, which is good enough for Skynet channels.
The ML wiki states: http://magiclantern.wikia.com/wiki/HDMI_Output
" HDMI output from the Canon HDMI is limited to 1620x1080 (3:2) while the camera is not recording (which is its stream mode).
This requires the user to crop the footage from the external recorder to 1620x910 (16:9) and then resize it to either 1280x720 (79%) or 1920x1080 (119%)."

ML only up res. for RAW to about 2k(XXD series) to 2.5k (5D series), no Canon DSLRs shoot 4K.  If you want 4k, try time lapse shooting, then play with Twixter/AE to interpolate skipped frames or speed it back up (???Report back as Ive never done this but seen a few others who did). And BTW this means your 4K would be 14 bit raw (more bits than a BMD ursa).  This is a massive work around, and probably wont work for fast motion, ... its probably a workflow from hell. 
Title: Re: Canon 700D / T5i
Post by: kryzysord on October 25, 2015, 07:26:47 PM
Latest version (magiclantern-Nightly.2015Oct01.700D114) of ML for 700D has many bug, magiclantern-Nightly.2015Aug18.700D114 was more stability. Today I'm working on movie plan to take some pictures. After few photo ML shows "modules loading" while any modules wasn't enabled and I need to turn off camera:/ next is "device was not correctly turned off, turn of and turn again" - here only take off battery repair problem. Next is zoom in preview, right button "+" zoom max. On clear software progrissively zoom photo. Sorry for my english, take this sugesstion in next update.
Title: Re: Canon 700D / T5i
Post by: axelcine on October 28, 2015, 06:53:18 PM
@kryzysord - when I first installed ML I opened the Modules tab and <SET> all modules to load on next open. Then I shut down my camera and turned it on again. All modules loaded without problems.

The Oct. 1 platform is very stable, and it is up-to-date.

ML has a rhytm built in. When you work your camera too fast, you seem to rush your ML - and your camera. Take a little time, take a breath. Look in the viewer, press the shutter button halfways and see the software work for you. Half-press the shutter. Read the numbers in bottom of the viewer and enjoy the wonderful picture, take another breath and press the shutter all the way. Love the camera.

Let's see a lot of fine pictures from you.
Title: Re: Canon 700D / T5i
Post by: kryzysord on October 28, 2015, 07:31:51 PM


Quote from: axelcine on October 28, 2015, 06:53:18 PM
@kryzysord - when I first installed ML I opened the Modules tab and <SET> all modules to load on next open. Then I shut down my camera and turned it on again. All modules loaded without problems.

The Oct. 1 platform is very stable, and it is up-to-date.

ML has a rhytm built in. When you work your camera too fast, you seem to rush your ML - and your camera. Take a little time, take a breath. Look in the viewer, press the shutter button halfways and see the software work for you. Half-press the shutter. Read the numbers in bottom of the viewer and enjoy the wonderful picture, take another breath and press the shutter all the way. Love the camera.

Let's see a lot of fine pictures from you.

Good thinking [emoji14] unfortunately, sometimes you can't work slow but I will remember this
Title: Re: Canon 700D / T5i
Post by: axelcine on October 28, 2015, 09:21:40 PM
Being a press photographer and a journalist for 34 years I can only confirm what you write. We do not always have the time to play with the camera.

But you have to! Have it in your hand some time every day, in the weekends and in the evenings. It's a part of you. I promise you: ML will work for you as it works for me every day.

Good luck and let's see some of your photos.
Title: Re: Canon 700D / T5i
Post by: Unnivversal on October 31, 2015, 11:50:44 AM
Hi Does audio monitoring using headphones for the t5i 700d work yet?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on October 31, 2015, 12:04:08 PM
Please consider using Search. Or go to post 811 and below.
Title: Re: Canon 700D / T5i
Post by: axelcine on November 17, 2015, 06:32:40 PM
Hi, all you 700d guys and girls out there... Go get the latest ML package. Santa Clause has been here with an early gift! The ML devs have done it again - the latest ML is gooooooood! (Okay, the other nightlies were good too, and with more than a hundred updates since May 2014 the seriousness and dedication of the devs can't be denied.)
My Magic Zoom used to flicker a little. Now it's totally flickerfree. Several other issues have been addressed; A1ex and Nikfreak have been working overtime. Thank you, guys. It's really appreciated out here. ML simply gets better and better. There is a lot of work being done all the time by the devs, and judging by many of the more trivial posts in this forum I'm not sure, we always recognise them the way they deserve to be recognised.
A lot of my buddies spend a lot of time telling me what they can do with their Sonys and Panasonics. Whenever I start the ML making magic with my cam, I really do tell them exactly what they can do with their cameras!!!!!!
Title: Re: Canon 700D / T5i
Post by: Felipe on November 18, 2015, 02:55:58 AM
Thanks to nikfreak and A1ex yes the cameras feel very solid even being able to increase bitrate, something magic happened
Title: Re: Canon 700D / T5i
Post by: rtf on November 19, 2015, 04:29:28 PM
I am thinking of buying this camera. How long can you record RAW with 50fps and 60fps at a resolution of 1280x720?
Title: Re: Canon 700D / T5i
Post by: axelcine on November 19, 2015, 07:18:56 PM
ThankMeLater http://www.magiclantern.fm/forum/index.php?topic=14561.msg141333#msg141333 wrote:
- Card is limited to 40 MB/s write speed ! ( To make this clear: You can only shoot lower resolutions continuously. I haven't shot with my 700D for a while but i remember the highest resolution is a bit higher than 1280/720. This also means your focal length gets cropped even further ! Simply said you can only shoot a "smaller" picture. This is what i dislike most about the 700D. If you only shoot shorter clips - like 20 seconds f.e - you can go higher with the resolution and the problem with the focal length decreases.

The t5i is a very nice camera. I've had one for two years and I'm very happy with it. I use it mostly for photo (I teach photo) and h264, but will be doing some RAW moviemaking over christmas.
Title: Re: Canon 700D / T5i
Post by: Nihal196 on November 21, 2015, 05:34:59 PM
Hello everyone,

I've been using ML on the T5i for about 6 months now to shoot my short films and other projects, but now I want to make the jump to RAW video. I have watched a ton of tutorials on youtube and have learned quite a bit about it, but I still have a few questions that I can't seem to find answers to.

1. Since the T5i can only shoot at a max of 720p for RAW, I've noticed that the camera crops in to the footage I am shooting, effectively making the focal length longer. Please correct me if I am wrong, but this is what I have seen in my tests.

2. I mainly shoot all my short films in 2.35 or 2.40, and I've noticed that I cannot have the 2.35 bars come up on screen while recording in RAW. This has become a huge problem for me, since it shows up when I am recording normally through the camera. What can I do to change this?

3. This may be a follow up question to question 1, but what should I set my "Preview Options" to under RAW Video (MLV)? I've had it set to multiple things, but I am not sure which one is recommended to people who exclusively shoot video.

Any help with these questions would be great, you guys! I am sorry for being such a noob.
Title: Re: Canon 700D / T5i - Any Hope For 3rd Party Flash In Live View?
Post by: Creelove on November 22, 2015, 05:24:09 PM
I do a lot of macro focus stacking using Magic Lantern with my Canon T5i. I use strobes, so I need a way to trigger them. Because of Canon's limitation on 3rd party flashes in Live View, I'm not able to my hot shoe RF trigger or PC sync adapter. Optical triggering from the on-board flash doesn't work well because I don't have line-of-sight with the optical sensors of my strobes. My workaround is to bounce the on-board flash to an optically triggered speedlight which then triggers the strobes.

I previously owned a Canon T2i and was able to use the Magic Lantern 3rd party flash in Live View "hack." I know this option is not part of the T5i Magic Lantern build. Is there any hope in revisiting this in the future? Can anyone provide a build that has this option enabled?   

As much as I love my Canon T5i, it's such a big limitation that I'm considering buying a used Canon 60D/70D/7D which has the ability to disable silent shooting in Live View (supposedly fixes this problem.)

UPDATE

I pulled out my old Canon T2i that I'm selling and tried focus stacking using ML with the the 3rd party flash in LV option enabled. It doesn't work with focus stacking.

I ended up downloading a trial version of Helicon Remote for Windows connected to my Canon T5i via USB. It does exactly what I need for focus stacking. It goes into LV between focus steps and gets out of LV at each focus step to take the picture. The flash works the same as when I'm taking pictures outside of LV. In my case, it's a shoe-mounted generic radio trigger connected to studio strobes. No need to use optical triggers.

Maybe this function can be added to the ML focus stacking routine in the future?

Title: Re: Canon 700D / T5i
Post by: jim_blind on November 30, 2015, 04:15:05 PM
Hi everyone. My question is not related to ML, but probably you know the answer.
Recently I've started to have video recording problems. The video stopas automaticaly from 2 minutes or even from 30 seconds of recording. I'm using SanDisc 16GB Class 10 with 40mb/s and don't know the solution for this problem. Just before stopping the record camera shows increasing indicator at the top right corner. Sometimes this indicator strats to grow, but after few seconds drops down and recording was not interrupted. Also, jointly with this indicator appears other indicator from ML, at the right top corner near recording red dot, it shows increasing percentage.
Please help.
Title: Error Loading Module MLV_SND Firmware 114 Built on: 2015-11-15 01:12:39 +0000
Post by: atpt on December 05, 2015, 09:03:31 PM
Error Loading Module MLV_SND Firmware 114   Built on: 2015-11-15 01:12:39 +0000    |   Canon 700D/T5I

Scanning modules...
Load modules...
load: MLV_SND.MO
Linkking...
tcc: error: Undefined symbol 'mlv_rec_get_free_slot'
tcc: error: Undefined symbol 'mlv_rec_queue_block'
tcc: error: Undefined symbol 'mlv_rec_release_slot'
tcc: error: Undefined symbol 'mlv_rec_get_slot_info'
tcc: error: Undefined symbol 'mlv_set_type'
tcc: error: Undefined symbol 'mlv_rec_set_rel_tymestamp'
[E] failed to link modules
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on December 06, 2015, 01:56:45 AM
Read bottom lines:
"Adds sound recording functionality to mlv_rec."
But you haven't mlv_rec.mo loaded ...
Title: Re: Canon 700D / T5i
Post by: axelcine on December 06, 2015, 07:19:24 PM
I have been trying for a couple of hours now to reproduce your problem. I have turned all modules off and back on again while shutting the cam down in the middle of the process and even taking out the battery in the middle of the process - I feel like I have tortured my ML. But as soon as I turn the modules on again, they load on next power-on like they should.
I would be tempted to format the SD card in my card reader, format again in the camera, copy the contents in the zipped package (700d.114) to the SD card via the card reader and insert it in the cam. And finally update the .fir from the Canon update menu. If the error repeats itself, try to re-download the 700d.114 and go through the whole process once more. I'm using the latest build just like you on my 700d, and here it works like a dream. Good luck.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on December 06, 2015, 07:21:52 PM
Axel, this error is a very common one caused by not paying attention to detail (= Bottom line info). MLV_SND requires MLV_REC to be loaded. Try to run it without and the very error messages will be seen.
(I take it for granted your message is directed to atpt's problem because I don't have any related to modules.)
Title: Re: Canon 700D / T5i
Post by: axelcine on December 06, 2015, 07:39:28 PM
That's it, of course. I just never tried to load the one without the other - I mean, why on Earth would anyone want to record sound to not-recorded RAW video???

Reloading the SD-card with ML is always a good exercise, like writing on a black board 100 times "I must load MLV_REC before MLV_SND" and the more you handle the basic stuff, the sooner you understand the overall logic.
Title: Monitoring the Sound : Canon 700D / T5i
Post by: atpt on December 06, 2015, 11:48:55 PM
Thanks for your help.
Using a 700D how can I monitoring/headset the Audio? What option to enable?

Title: Re: Canon 700D / T5i
Post by: Walter Schulz on December 06, 2015, 11:53:51 PM
Top of page -> Downloads -> Download Nightly Builds -> Features -> Audio

Sorry, no avail!
Title: Re: Canon 700D / T5i
Post by: Demram on December 14, 2015, 08:32:00 PM
Hi everyone!, I been trying to use the focus stacking mode in my 700d (last update of ML with canon firmware 1.1.4) but I haven't succeed with it. I have changed the different parameters in focus stacking and focus settings but after running the focus stacking mode I never get pictures with different focus :/. Someone else have this same problem? I had tried with different tutorials on internet but I keep failing at it (the tutorials are always for other camera models).
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on December 14, 2015, 08:43:40 PM
Camera model used doesn't matter. It's v2.3 vs. nightly build what counts. And you are on 700d and 2.3 is not available.

ML focus stacking is not that easy to master. There are two modes. The easiest for beginner is that one:
- Follow Focus OFF
- Focus settings -> Step size 2, Step delay 200 ms (just for starters)
- Focus Stacking -> Focus steps / picture 4
- Open Liveview and focus an object
- Focus stacking -> Num. pics in front 0, Num. pics behind 2
- Run focus stack

Compare results and report here success or failure.
Title: Re: Canon 700D / T5i
Post by: Demram on December 14, 2015, 09:07:36 PM
Walter, thanks for your answer!. I have tried like that before, anyway I re-did it and the focus is almost the same in every picture (not noticeable at all, even zooming in), I'm starting to think that my autofocus is a little damaged or something. Should I try with more or less focus steps to change more the focus between pictures?, or change the step size?

Sorry if the questions are too obvious, I'm very noob with ML (I have only used the motion detection mode, the intervalometer, and some overlay).
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on December 14, 2015, 09:16:21 PM
For debugging: Just increase Step size and Focus steps.

If you intend to increase Num. pics behind for debugging you may want to use
Shoot tab -> Shoot preferences -> Snap Simulation ON
Shutter/mirror will not be actuated and you will have to look into LV to see focus plane changing from front to rear.

EDIT: Focus tab -> Focus Settings -> Step wait ON.
Title: Re: Canon 700D / T5i
Post by: IFTEKHARRS on December 24, 2015, 03:19:38 PM
My firmware is 1.1.3 for 700D
But only download option available is 1.1.4.
What to do ?
Title: Re: Canon 700D / T5i
Post by: axelcine on December 25, 2015, 01:44:30 PM
Upgrade your firmware to 114 - you may find the new firmware on many regional or national Canon sites. Once updated, installing the ML is very easy and virtually foolproof - at least I made it work!!!!!
Title: Re: Canon 700D / T5i
Post by: damphoto on January 03, 2016, 05:28:20 PM
red Pixel in DNG Output File??
Bug ?


https://www.dropbox.com/s/rr5ujjgpox0oith/M03-1241_C0000_00012.jpeg?dl=0 (https://www.dropbox.com/s/rr5ujjgpox0oith/M03-1241_C0000_00012.jpeg?dl=0)
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 03, 2016, 05:31:33 PM
Search
Pink Dot Remover
and associated discussions.
Title: Canon 700D / T5i
Post by: DeafEyeJedi on January 03, 2016, 07:28:38 PM
@damphoto ... http://www.magiclantern.fm/forum/index.php?topic=16054.0
Title: Re: Canon 700D / T5i
Post by: commedieu on January 07, 2016, 08:57:11 PM
Hi All, 700D here. With 1.14

It seems that to do Raw, you have to install the MLV, then you will DEFINITELY run into the pink pixel problem, so you will additionally have to install the sscript that (i can't remember the users name) made to fix it? THats the process..? So after I record raw videos, I will have the pink dots, that will need to be removed in post? Correct?

Also,

BIT DEPTH of h264,
Good results are being had with this tweak, could someone point me in the right direction to do this? I'd like to test the bit depth before getting into raw. Honestly, for the quality I'm seeing, I'd be fine if I could at least loose half the compression of the native 700d. I mean, i really have to look for it. I do VFX compositing, so it definitely jumps out at me. But if the bit depth increase 2.5x? would result in better h264's, I think I'd be ok with that.

Anyone have samples of just the bit depth increase?

Im a little nervous about the pipeline to shoot, then fiddle to get rid of the dots.

Thank you.
Title: Re: Canon 700D / T5i
Post by: adammattner on January 16, 2016, 05:25:49 PM
Hi,

I know it has been mentioned but I'm also having trouble getting the rack/follow focus to work on the magiclantern-Nightly.2016Jan14.700D114 running canon firmware version 1.1.4. Is this feature supported?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 16, 2016, 05:40:48 PM
Top of page -> Downloads -> Download Nightly Builds -> Features -> Focus -> Follow Focus/Rack Focus
Title: Re: Canon 700D / T5i
Post by: adammattner on January 17, 2016, 02:08:38 PM
Thanks I see that this feature is compatible however whenever I change the "steps from here" figure the focus doesn't change the number goes up or down but no physical effect to the focus on my 700d using the kit 18-55mm STM Lens. I just tried on my 50mm with success so it seems to be lens related. Any ideas to get the STM 18-55mm working?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 17, 2016, 02:42:04 PM
Don't have a kit lens around to test (650D with 50 STM and 10-18 STM). Sometimes my STMs seems to have "issues" with follow focus/focus stack. Couldn't pin it down yet but it looks like they are going to sleep after some time and have to be triggered to wake up.

Test this:
I assume you are in video mode and have Follow Focus Arrows activated. Arrows are shown on screen and you can use "Arrows" to move focus plane?
If so:
1) Focus End Point -> Q
2) Use arrows to move focus plane
3) Use Rack Focus -> Set. Focus plane should shift to Focus End Point
4) Press Set again and focus plane should be moved back where you started

Does it work this way with STM and non-STM for you?
Title: Re: Canon 700D / T5i
Post by: Jordi Agulló on January 18, 2016, 01:54:02 PM
Hello,

I've been trying to make the focus peaks features work on my new 700D with no avail. I'm running latest firmware and build (2016Jan14), any idea what the problem might be?

Thank you
Title: Re: Canon 700D / T5i
Post by: dantahoua on January 18, 2016, 03:25:56 PM
Hello!
Is it possible to record 720p/30fps or 720p/24fps WITH sound ? In fact kind of "normal" mode but in 720p... FPS overide always remove sound... I would like to be able to make some 720p regular video with sound...
Title: Re: Canon 700D / T5i
Post by: maff on January 20, 2016, 06:52:57 AM
same question here - how to record with sound?
Title: Re: Canon 700D / T5i
Post by: yonarod on January 29, 2016, 02:37:58 PM
Sorry my English because my language is Spanish. I'm starting with magic lantern, I have installed on my 700D does not work properly. When I put on video live view mode it remains of the orginal camera. What can I do?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 29, 2016, 02:44:44 PM
Press INFO button several times.
Title: Re: Canon 700D / T5i
Post by: yonarod on January 29, 2016, 03:17:42 PM
Thank you. I worked perfectly. Sorry for the inconvenience
Title: Re: Canon 700D / T5i
Post by: Mikexmirrick on February 02, 2016, 08:29:53 PM
I have a canon t5i and just bought a rode video mic for it but the magic lantern audio feature does not show up in the magic lantern menu. The firmware is currently 1.1.4. Is there an updated magic lantern I can use or a part of the code that can be changed? I really enjoy using magic lantern but it will not allow me to use audio. When I press record it says sound disabled. Can anyone help me?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on February 02, 2016, 08:31:52 PM
Load MLV_SND.mo and MLV_REC.mo
For restrictions -> Top of page -> Downloads -> Download Nightly Builds -> Features -> Audio
Title: Re: Canon 700D / T5i
Post by: lukew19 on February 03, 2016, 08:55:56 AM
Hi,
I'm probably asking a stupid question but when using raw video (mlv 2.0) with dual iso I get an error at the top left corner, its: "ISOless LV err( 8 )"  and whilst turning off the 700D I get the error: "ISOless PH err(15)".  I guess what I'm asking is, is dual iso supported on this specific camera?

Thanks
Title: Re: Canon 700D / T5i
Post by: axelcine on February 03, 2016, 07:24:30 PM
http://builds.magiclantern.fm/#/features
Title: Re: Canon 700D / T5i
Post by: lukew19 on February 03, 2016, 09:01:11 PM
Quote from: axelcine on February 03, 2016, 07:24:30 PM
http://builds.magiclantern.fm/#/features
I looked at that list earlier, seems the 700D supports dual iso, so I'm confused about why I'm getting this error.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on February 03, 2016, 09:09:24 PM
I have "ISOless" errors on 650D frequently and they occured on 700D and M, too. AFAIK the bug still has to be cornered. Resetting to ML defaults helps to get rid of it temporary.
Title: Re: Canon 700D / T5i
Post by: denlee on February 14, 2016, 06:49:04 AM
Has this ever been tested on the Japanese model, i.e. X7i?
I just got my camera...and don't want to screw up. :)
Thank you!
Title: Re: Canon 650D / T4i
Post by: metaxis on March 01, 2016, 01:05:57 AM
Hello everyone,
Is there anyway to enable the display screen to see what you're recording while connnected to an external monitor?
Is it possible for magic lantern to fix this?
Thank you.
Title: Re: Canon 700D / T5i
Post by: dfort on March 01, 2016, 01:25:45 AM
Quote from: denlee on February 14, 2016, 06:49:04 AM
Has this ever been tested on the Japanese model, i.e. X7i?
I just got my camera...and don't want to screw up. :)
Thank you!

These cameras are all the same:
700D | Rebel T5i | Kiss X7i

You can screw up any one of them equally. Just kidding--but that's pretty much the Magic Lantern disclaimer.
Title: Re: Canon 700D / T5i
Post by: alancord on March 16, 2016, 08:00:21 PM
Is the Red/Pink Pixel Problem only appearing in VIDEO RAW Format or also in RAW Format when shooting normal pictures?
Title: Re: Canon 700D / T5i
Post by: dfort on March 16, 2016, 08:32:48 PM
@alancord

If you're talking about focus pixels (http://magiclantern.fm/forum/index.php?topic=16054), that affects MLV and RAW video. I also affects Simple Silent Picture but not Full Resolution Silent Pictures. It doesn't affect normal (CR2) or Dual ISO still photos.
Title: Re: Canon 700D / T5i
Post by: alancord on March 16, 2016, 09:21:34 PM
Thanks for the quick response. So no raw video shooting with the 700d  :(
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on March 16, 2016, 09:27:52 PM
That's not what the man said!
Title: Re: Canon 700D / T5i
Post by: alancord on March 16, 2016, 10:28:30 PM
@walter Schultz

So rawvideo  shooting is possible?
Title: Re: Canon 700D / T5i
Post by: dfort on March 17, 2016, 03:50:41 AM
Quote from: alancord on March 16, 2016, 10:28:30 PM
So rawvideo  shooting is possible?

The man says, "Yes!"

What Red/Pink Pixel Problem are you referring to? Could you post an image so we know what you are talking about?
Title: Re: Canon 700D / T5i
Post by: alancord on March 17, 2016, 05:15:31 PM
My Problem is like this:
I thought i can install  ML on my 700D to make raw videos but when i read that there are pixels which don't belong there so i stay with the original firmware. Or is this pixel problem appearing with a special setting?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on March 17, 2016, 06:12:36 PM
Then you shouldn't use digital at all. Because there are pixels that don't belong there (= noise) all the time.
Title: Re: Canon 700D / T5i
Post by: dfort on March 17, 2016, 10:58:25 PM
Raw video requires special handling no matter what system you use. Magic Lantern is no exception. Those focus pixels actually do belong there, they're part of the focusing system, and there's ways to deal with it (http://magiclantern.fm/forum/index.php?topic=16054.0).
Title: Re: Canon 700D / T5i
Post by: PA Shutterbug on April 09, 2016, 02:22:22 AM
Since updating to magiclantern-Nightly.2016Apr01.700D114.zip, I have been unable to record video longer than 15 seconds before the camera stops recording.  If I "update" the firmware to the no ML firmware, I still unable to record more than 15 seconds.  If I update the firmware to the  previous ML edition I can record up to 30 minutes both with the ML update and without it.


Installed (Built on: 2016-04-12 20:12:22 -0400).  Problems went away. 
Title: Re: Canon 700D / T5i
Post by: dfort on April 09, 2016, 06:43:54 AM
What settings are you using? Raw? H.264? Size? Framerate? Note that when you switch versions the settings are reset so the frame size for raw and MLV video defaults to 1728x972.

So you're saying there is a difference between the (current) 2016Apr01 build and the 2016Mar30 build? That means that the menu_timeout_fix is stopping video recording.

I cannot reproduce the issue. Tested both MLV and H.264. Everything works fine on my 700D with the 2016Apr01 nightly build.
Title: Re: Canon 700D / T5i
Post by: aajlin on April 11, 2016, 02:17:09 AM
Hi There

I have recently installed ML to my 700D but my install somehow does not have the option of "Bulb/Focus Ramping" under the Shoot menu.

Is there a patch or an additional file required as part of the install?

Any assistance is appreciated.
Title: Re: Canon 700D / T5i
Post by: JamesSteele on April 15, 2016, 01:47:58 AM
Quote from: dfort on April 09, 2016, 06:43:54 AMI cannot reproduce the issue. Tested both MLV and H.264. Everything works fine on my 700D with the 2016Apr01 nightly build.

So the April build is safe for most people. That post made me a little leery of updating.
Title: Re: Canon 700D / T5i
Post by: axelcine on April 15, 2016, 01:50:57 PM
@aajlin - Focus ramping is there - https://builds.magiclantern.fm/#/features. But I think I remember, that the function was changed some time ago; the bulb option would cause problems. . According to the list, no cam has bulb/focus ramping any more.

Walter Schulz mentions the issue here: http://www.magiclantern.fm/forum/index.php?topic=15921.msg154619#msg154619

@JamesSteele - For convenience and access to the latest features and the most bug-free ML editions always use the latest build. I've updated my ML almost every time a new nightly was available with no problems at all.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 15, 2016, 02:58:29 PM
In this context: Gone for good -> "Elvis has left the building" and not "Gone for good -> Open the wine and let's have a party".
And I linked dmilligan's "Intervalometer ramping module" thread, too.
Title: Movie crop?
Post by: Anurania on April 16, 2016, 09:13:34 AM
Is 3x movie crop possible with the t5i?

I'm considering upgrading from my t3i and this is the only issue. I routinely use the 3x crop mode on the t3i, even more so than regular mode, and I know the t5i doesn't have it natively. Does ML add that ability, and is it available in H264 or only in RAW?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 16, 2016, 09:17:58 AM
Both, see https://builds.magiclantern.fm/#/features -> Movie -> CROP_MODE_HACK
Title: Re: Canon 700D / T5i
Post by: wicq on April 17, 2016, 11:50:25 PM
Hello, a little off topic, I own also the 700d, but I can only record 11 seconds of raw video. So im tempting to buy  the 5d mark iii, but 2 weeks ago I found in a gallery  a canon C300 (not mark ii) with lens 24-70mm and monitor, a beautiful beast, it`s used and you can tell is used cause there is  the handle ring a little bit  painted scratched and the 24 mm number in the lens is also  a little erased. The cost is not expensive at all for this camera, 3500USD , i test it and it works like a charm, the 98% of the entire body including lens and monitor and viewfinder looks amazing. I already read some ML threads that say that the team wont  touch any Canon C cameras, but im willing to help  to hack this one if you agree, we can do it remotely via skype so you can guide me  step by step on what is needed. I havent bought that camera, but i think for 3500USD with a complete bundle for the C300, i think is  a very good deal and if we can open this camera , that would be  incredible. Of course the one thing i dont like is that is not full frame so im still keeping my eyes on the 5d mark iii although the only reason I dont buy the 5D yet is because there are  strong rumors about the mark iV coming on september. Back to the reason of my post, please let me know if we can open the C300. Give it a thought , thanks in advance
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 18, 2016, 05:23:12 AM
Quote from: wicq on April 17, 2016, 11:50:25 PMI already read some ML threads that say that the team wont  touch any Canon C cameras
Title: Re: Canon 700D / T5i
Post by: wicq on April 18, 2016, 06:18:19 AM
Hi walter, i know i said that and it`s true, but in my post im asking if it would be possible  to work together remotely  to try to hack the C300 , i bet if hacked , it could open 4k raw video, it has 2 cf slots and one sd slot . If  the team agreed , i would buy  the C300 that I found here  at 3500USD complete bundled with monitor and lens , it`s a great deal, but if not, I think i will wait for the 5d mark iv , if it offers something nice and also  ML team  can hack  the mark4 for raw video that i imagine canon wont open. So without hacking the C300, I think it doesnt worth to buy it since the 5d mark iii would be a better deal because of ML 14bit raw hd video. I have watched lot of videos with the title "what camera should i buy" and one thing I agreed is that you have to buy a camera to suit your needs. I make cg and with my T5i/700D 11 seconds 14bit raw video, i can track a very extremely shaky video , to add 3d models and/or animation, I cant do  the same with coded video, it just doesnt work. Of course I shouldnt have extremely shaky video but if i can track something like that thanks to raw i think Raw is something very important for what i do. SO the C300 with the term cinema and being so expensive  , i think to me without raw capabilities, it`s useless, but if it had raw , it would be a tremendous camera  like the 5d mark iii is now thanks to ML. Please give it a try, if you agree , i would buy it and we can work togther to see if we can hack  the camera.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 18, 2016, 07:09:06 AM
><((((*>

EDIT: @all-wicq: I just realized "answering" trolls by throwing ASCII fish is a german thing not widely recognized.
@wicq: EOD
Title: Re: Canon 700D / T5i
Post by: wicq on April 18, 2016, 01:43:21 PM
hey, im not a troll i just was offering my help to acomplish something
Title: Re: Canon 700D / T5i
Post by: dmilligan on April 18, 2016, 05:24:30 PM
Hacking/reverse engineering a piece of modern electronics is not something you can just learn how to do on a Skype call. It requires many years of prior knowledge and experience in electronics/software just in general (i.e. equivalent of a bachelor's degree at least). Even more experience in whatever specific platform you are hacking (e.g. embedded ARM microcontrollers), and then thousands of hours minimum (not an exaggeration) dedicated to the task of hacking the particular device (to get to the point of actually doing something useful).

Hacking something, really is just asking the question "how does it work?". It is understanding exactly how some device operates at the deepest most fundamental level. Once you know that, it's easy to make the device do what you want. It's the understanding how it works that's the hard part, since modern electronics are mind numbingly complex, there is no documentation at all whatsoever, and the manufacturer has probably done as much as possible to keep you from figuring out how their device works or slow your progress.

This is really the reason why we hack. We want to learn something. If your desire is simply a cheap 4K camera, hacking is not the answer, it's far too impractical and time consuming. You can save yourself countless time and money by simply purchasing something with the capabilities you desire. I dare say the "cost" (skill required, time invested, etc.) of hacking the C300 would far exceed the price of a Red Epic or whatever, and the risk is much higher (what you want to do might end up being impossible for whatever technical reason).

However, if you have the necessary background, and your desire is really to learn how the thing operates at a fundamental level, I'm sure the more experienced reverse engineers around here would be more than willing to give you some pointers (pun intended) to get you started.
Title: Re: Canon 700D / T5i
Post by: wicq on April 18, 2016, 10:13:56 PM
hi dmilligan, thanks for that explanation. I imagine hacking a device  is a work  that only people with studies and experienced can do , i know that my post sounds very simplistic or i made hacking sounds very easy to do . I just thought  that putting a camera at the service of the ML team would be enough, of course it wouldnt be possible to handle the camera  cause  we dont live in the same place, but i thought maybe on skype or other  medium i could be pointed out on what to do  step by step , i dont know maybe extract the API or i dont know, i really have no idea what ML does when hacking a camera, I have zero  knoweledge about it, my intentions were to trying to help with another camera. My desire is not only 4k cause if that was  my desire i would buy  any of the 4k cameras that are already in the market, my desire is raw video.  I understand that no one would give any Canon C camera cause they are expensive, but since I found one very cheap I thought it  would worth the  try. Well i guess i will have to wait for the 5d mark iv to be released, i hope it will be full frame 4k and the great ML team could hack it to have 4k raw, otherwise i will go for the 5d mark iii.
best
Title: Re: Canon 700D / T5i
Post by: axelcine on April 20, 2016, 10:33:16 PM
As several posts indicate, there is never any guarantee, that any forthcoming Canon will ever be ML'led. The 5DS/SR are not obvious candidates for any ML version in a foreseeable future, and my community - journalists and press photographers are greatly divided over the new cams from Canon: Lots of excellent pictures with astounding detail - but not enough ISO to do the dirty jobs in the sports arenas or when there has been an accident on the highway in the middle of a winter night. So don't hold your breath...

Last: I think we're quite a bit away from the 700d which is a wonderful machine, especially if it is powered by ML.
Title: Re: Canon 700D / T5i
Post by: Arijit on April 24, 2016, 05:37:16 AM
I am getting a "frame skipped, stopping" message after 2 secs during raw video shooting in eos700d. I am using a 45mbps sandisk card. pls advise
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 24, 2016, 08:00:52 AM
Modules tab -> Turn Bench.mo ON and restart -> Debug tab -> Benchmarks -> Card Benchmarks -> Quick R/W benchmark (1 min)

This will tell you the actual write performance for the camera-card combination. But no matter which card you are using: Cam's card interface is limited to about 41 MByte/s writing.
Adjust required transfer rate according to benchmark and leave some distance to the edge. Otherwise overhead needed for cam's processor to perform ML tasks will cause hickups.

700D is good for about 720p24 if card is fast enough. And you have to use ExFAT file system on your card. If your card is 32 GB or lower you have to format card using cardreader and redo installation. You are not allowed to to format card in cam then or ExFAT will be turned to FAT32 by Canon's firmware.
Title: Re: Canon 700D / T5i
Post by: Vanx on April 24, 2016, 01:23:35 PM
Hello guys, is the Magic Zoom working with the latest build on 700d? Thanks!
Title: Re: Canon 700D / T5i
Post by: actionping on April 25, 2016, 06:17:42 AM
Many Thanks
Title: Re: Canon 700D / T5i
Post by: josephjino on April 27, 2016, 08:04:47 AM
Hi folks,

I am a newbie in the ML Forum.
Have been following ML for past 6 months and finally installed it on my 700D yesterday :).
My few queries to the members:

1. I am using the stock Lexar 8GB Class 10 card. Not sure because of this, I tried to record RAW in 720p, the liveview went to crop mode on its own, with some area in the screen clipped off. Also the movie stopped in 3 seconds. Is it because of the SD Card??

2. I saw two modules: MLV and RAW for movie recording. What is the difference between two and which one is more advisable?

3. The magiczoom box is flickering while in liveview, plus I do not see any green focus confirmation as had read somewhere in the forums.

4.With under 15 minutes of usage, my camera temp. rose to 53`C. Is this normal..

Please shed light on the above...
Title: Re: Canon 700D / T5i
Post by: Vanx on April 27, 2016, 10:00:06 AM
Regarding the "Magic Zoom" you are confirming that even with the latest builds.. it still doesn't work, I read in the past that there is a problem with the 700d updated sensor, so this function will not work.
Title: Re: Canon 700D / T5i
Post by: nikfreak on April 27, 2016, 10:09:57 AM
Sorry to sound a bit rude but you should consider placing your queries also to the search function - be it a google search or the site search. Most of your questions have been already covered:

1. try another card. 720p should be continous. use the benchmark to get your write speeds
2. atm raw_rec for 700D with a sdcard been benchmarked in cam ~39MB/s.
3. post your flickering issue at bitbucket providing a link to a short sample video made with your smartphone. No green confirmation box for 700D available.
4. I Iike the efforts being put into temperature display but this one confuses people. I vote for eliminating it completely and keeping only raw values in debug menu.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 27, 2016, 10:21:29 AM
Remark to 1.):
And use ExFAT file system.
- Format card in cardreader and run installation once again.

Don't format card in camera after that or you will get FAT32 again.
Solution for this issue is in development (but no ETA. ETA not available at all in ML development).
Title: Re: Canon 700D / T5i
Post by: josephjino on April 27, 2016, 11:25:34 AM
@nikfreak..thanks for the info, I will see to that forum gets used for more serious issues.
@Walter Schulz..thanks for the help, I will try ExFAT system. Anyways I am buying a Sandisk Extreme Pro 64GB 90Mb/s. Will try it and infer the results.
Title: Re: Canon 700D / T5i
Post by: bsolah on May 01, 2016, 06:31:13 PM
Dumb questions. This is my first time using ML.

How do I know it's installed? It kind of looks the same though I think there's some settings there that weren't there before. I turned the camera on and off when it said restart.

Also, am trying to use my camera to livestream. Someone said if I installed ML I could remove all the stupid display things to get a clean feed. How do I do that?
Title: Re: Canon 700D / T5i
Post by: bsolah on May 02, 2016, 07:26:29 PM
Ok, after looking around it appears I probably haven't installed it properly. It tells me to restart the camera so I turn it on and off again and it seems the same as it was....
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on May 02, 2016, 08:20:26 PM
Top of page -> User Guide -> Install Guide/FAQ
Title: Re: Canon 700D / T5i
Post by: bsolah on May 03, 2016, 06:08:37 PM
Ohhhhhhh, missed that bit totally. It wasn't there when you installed it. That helps heaps, can now remove the liveview overlays and changing my settings seems to help with the livestream stuff. Only issue now is the stream seems to flicker every few seconds.
Title: Re: Canon 700D / T5i
Post by: savend on May 22, 2016, 07:45:57 PM
Hello!,
I'm french! I have installed ML on my 700d but i didn't found the audio menu (very important)! I have found a video, it explain how have this menu on the 700D but I'm not spain... https://www.youtube.com/watch?v=e8dj45lPlKY
Every one know how have this very important menu? Thanks ++
Title: Re: Canon 700D / T5i
Post by: mk11174 on May 23, 2016, 03:29:18 AM
As in the video you linked to, you would need to load the mlv_sound module with mlv_rec, after you turn them on and reboot your camera, the audio menu will show up because it will now have something to put in there, which will be mlv_sound which will allow audio recording while recording raw video with mlv_rec. This will be used in movie mode, not photo mode.
Title: Re: Canon 700D / T5i
Post by: savend on May 31, 2016, 10:05:24 AM
Ok, thanks, but it is impossible to have the auto gain control and some other preference on 700d? I have the sizzle with my extern micro! :/
Title: Re: Canon 700D / T5i
Post by: Arlunwyr on May 31, 2016, 02:28:06 PM
MagicZoom working for me, kind of..flickers a lot and has no focus confirm. I understand this is a limitation of the camera, though?
Title: Re: Canon 700D / T5i
Post by: [email protected] on June 23, 2016, 06:20:49 PM
Hello everyone!

Please tell me there in the new firmware function Movie crop mode?
The problem with the focal points is solved?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 24, 2016, 08:09:20 AM
Quote from: [email protected] on June 23, 2016, 06:20:49 PM
Please tell me there in the new firmware function Movie crop mode?

https://builds.magiclantern.fm/#/features
Crop_mode hack refers to H.264
Crop mode in RAW/MLV is implemented for all cams supporting RAW/MLV video.

Quote from: [email protected] on June 23, 2016, 06:20:49 PM
The problem with the focal points is solved?
http://magiclantern.fm/forum/index.php?topic=16054.0
Give MLP and MLVFS a try.
Title: Re: Canon 700D / T5i
Post by: edmundo_vn on June 24, 2016, 11:03:29 PM
Hi.

I'm using Magic Lantern for a while and actually I can view the graphics overlays in image review mode (or quickreview or whatever it's called the image that appears just after the picture is taken), then if I get out of that screen and press play, it goes to the default image review mode of the camera that don't have the overlays. I saw a video on youtube that someone appears to be using a Canon 5D MkII and he presses the picture style button to show the overlays. As I understood the 5D uses that button because it doesn't have the Q button (quick control), but the 700D has the Q button and the picture style button. In 700D que Q button calls a "shooting function settings" screen when pressed in image review mode, and the picture style button seems to only be used to go down when you zoom the image.

Is there any way to show the overlays in image review mode anytime in 700D?

Regards
Title: Re: Canon 700D / T5i
Post by: radarsski on July 06, 2016, 06:13:28 AM
I'm sorry if I didn't get to the right place on the forums for the question I have but I am new to the forums. I have a brand new t5i and it is running 1.1.4 firmware. I have heard nothing but good about ML and I am anxious to use it installed in my camera. I was just reading a blog on planet5d site and they highly recommend ML. At the same time I am hearing guys with the 5D and other very spendy cameras saying to run ML from the card. There are also people talking about bricking their cameras, which I am assuming means they froze up their camera. You are the folks I want to talk to about this as I would love to use many of your features but I am kind of leary of screwing up my camera. If someone gets the time, please tell me the best way to use ML and if I should be worried about a t5i brick. I am fairly computer savvy and can install and run programs and follow instructions. I just need a reassuring voice telling me that ML is as awesome as I hear it is. 
Thanx, Radarsski  8)
Title: Re: Canon 700D / T5i
Post by: yonarod on July 07, 2016, 05:49:09 PM
As I can see the volume control menu?
Title: Re: Canon 700D / T5i
Post by: maskednil on July 10, 2016, 08:31:30 AM
Well radarsski, I have a t5i as well and I have been using ML since Oct 2015. Never had a problem with it other than some small errors like the screen being mirrored. Or sometimes bars and overlays get stuck. Easily solvable with a simple restart of the camera. I did encounter a softbrick once (blue screen of death. This ain't Windows camera!) but that was caused as I used a custom overlay that wasn't compatible with ML. Worked okay once I disable/deleted it. ML is worth it and since it's a hack it ain't perfect. You gotta be slow with it and take your time. Rushing it will only cause these small annoying problems.  There is obviously a learning curve involved and I do think it's worth it especially for the RAW/MLV recording. Focus peaking is really helpful for run and gun photography. Another great addition is the color temperature which is manually selectable. With the overlays you can use the viewfinder to compose your shots more effectively. There is the customary rule of third and golden ratio overlays that comes with ML. The zebra lines, histogram and waveform are god send! Really helps with composing shots. Especially for video shooting. Google and Youtube will be your friends. Hope you enjoy it!
Title: Re: Canon 700D / T5i
Post by: derus001 on August 09, 2016, 02:02:14 PM
Hi everyone!

I'm kind oF new in the ML world but I've been getting along pretty well and I love it!

But I want to clean up my footage more,
how do I get rid of the noise in my raw video footage?

I use After effects and Premiere pro on my Macbook pro

I made the video with an ISO 6400 set (not Dual iso)

when i shoot videos in bright daylight the clips turn out fine, but the darker the environment the more noise i get on the footage, Is there any good way to go around this? Preset in camera/ post production? 

Thanks!

PS. I have a 700D
Title: Re: Canon 700D / T5i
Post by: nikfreak on August 18, 2016, 07:50:42 PM
Can someone please test for me:

enable fps override in LV and take a picture. Does 700D return from QR to LV if fps override is enabled?
Title: Re: Canon 700D / T5i
Post by: mk11174 on August 20, 2016, 09:05:56 AM
Yes, depending what time amount I have it set in Canon, it reviews image then comes back to LV.

If I try some weird setting like say set fps to 5fps, but shutter to 1/200, it shows a brighter LV then 1/200, but not as bright as if it was set to 1/5 from being set to 5fps.

If I then take a picture, it will review, then come back to LV, for like 1 second show a live view exposed at 1/5 because its obviously much brighter, but then settles and shows the live view exposed as it was before I took picture.
Title: Re: Canon 700D / T5i
Post by: nikfreak on August 20, 2016, 11:31:16 AM
thanx for letting me know.
Title: Re: Canon 700D / T5i
Post by: drone2406 on August 20, 2016, 01:41:39 PM
Hi. I installed ML114 on 700d/T5i, but There are error message " Isoless PH ERR(15)". Help me, please.
Title: Re: Canon 700D / T5i
Post by: nikfreak on August 20, 2016, 03:17:15 PM
check:
https://bitbucket.org/hudson/magic-lantern/issues/2427/700d-dual_iso-isoless-ph-err-15
https://bitbucket.org/hudson/magic-lantern/issues/1781/650d-dual_iso-isoless-ph-err-2
Title: Re: Canon 700D / T5i
Post by: DanielB on August 21, 2016, 05:52:05 AM
Hello everyone! I'm new here and just started using ML on my T5i. I love this add-on, GREAT work to all involved!!

I'm not 100% sure, but I think I may have found a bug (or possibly it's a hardware/software limitation)... If this has already been discussed, then I apologize. I tried to search but didn't find anything.

I set the focus patterns shortcut option in ML to ON so that I can quickly change the pattern in photo mode thru the view finder (not live view of course) by using the arrow+set keys. It works as intended when the LCD screen is facing outwards or in any other position besides LCD facing inwards to the camera body. For whatever reason, when the LCD screen is flipped around and closed into the body (I.e. in the position where you couldn't accidentally scratch the screen cause you can't see it) the arrow+set keys stop working (that is, the focus pattern no longer changes in the view finder).
Title: Re: Canon 700D / T5i
Post by: sergiolopez94 on August 21, 2016, 03:08:38 PM
Hey guys...
I was wondering if the audio controls will ever be available in the t5i
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on August 21, 2016, 04:38:29 PM
At time of writing there are no advanced audio options for cams featuring DiGiC 5 processors.
Title: Re: Canon 700D / T5i
Post by: DanielB on August 28, 2016, 06:00:24 AM
Does anyone have any comments on my previous post (#927)? Am I just doing something wrong...?

I also cannot get any of the special image review features to work at all. I first tried the exposure fusion feature to see an example of some AEB photos I took, but it wouldn't work. Then I tried Compare Images, that wouldn't do anything either. I tried changing the trigger buttons from set+dial to just Left/Right keys and back and forth, still nothing.

I love the software though! For the most part it's tip top, 99%
Title: Re: Canon 700D / T5i
Post by: ToxinLhays on September 20, 2016, 02:32:49 AM
Hii all...
Magic Lantern has been update to 2.3 but i cant find for Canon 700D.... where i can get newest version?
Title: Re: Canon 700D / T5i
Post by: bigsmall999 on September 28, 2016, 01:07:23 PM
On the first post of this thread it says I should have Canon 1.1.3 firmware installed.

On the download page (http://builds.magiclantern.fm/700D-114.html) it lists 1.1.4.

Please can you advise, should I have 1.1.3 or 1.1.4 installed before installing this version of ML (magiclantern-Nightly.2016Sep16.700D114.zip)?

Thanks.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on September 28, 2016, 03:13:39 PM
https://builds.magiclantern.fm/700D-114.html contains valid and most recent instructions.
Title: Re: Canon 700D / T5i
Post by: oeci on October 03, 2016, 04:17:42 PM
At the end of September Canon has released a new firmware, 1.1.5, which fixes usage of certain lenses. Will there be a new nightly in the near future that works with the latest official firmware. Not that it's urgent (at least for me) since I don't use the lenses concerned, I'm just curious.

By the way, thank you for your wonderful piece of software, it really enhances the camera even though as an amateur I only use a few out of all features offered by Magical Lantern.
Title: Re: Canon 700D / T5i
Post by: dfort on October 05, 2016, 04:09:01 AM
Quote from: oeci on October 03, 2016, 04:17:42 PM
At the end of September Canon has released a new firmware, 1.1.5, which fixes usage of certain lenses. Will there be a new nightly in the near future that works with the latest official firmware...

Someone asked this same question on another topic so at the risk of double posting, to get ML working on a new firmware is a lot of work so unless there's a high demand for 1.1.5 and a developer willing to work on it -- it will probably not be updated any time soon.

Quote1.1.5 Corrects a phenomenon in which when using the camera with the EF-S 18-135mm f/3.5-5.6 IS USM or EF 70-300mm f/4-5.6 IS II USM lens, even if lens aberration correction is set to "Enable", correction will not be applied
Title: Re: Canon 700D / T5i
Post by: Felipe on October 13, 2016, 11:13:00 PM
New 700D cameras are being sold with the new firmware, that in the case of the 100D new firmware, shows a better video autofocus in servo an face tracking.
Despite Canon does not mention this it does focuses better.
Title: Re: Canon 700D / T5i
Post by: sdelange99 on October 18, 2016, 03:36:17 PM
Today I got my camera back from a Canon repair center. My phase detection AF had to be re-aligned due to front focussing. Prior to sending my camera I uninstalled ML, just to be sure. In the end, the repair was covered by my warranty.

Unfortunately, the repair center also updated my camera's firmware to 1.1.5  :'(.

Is there any way to downgrade to 1.1.4 so I can use ML again?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on October 18, 2016, 04:54:15 PM
Yes. Top of page -> Downloads -> Download Nightly Builds -> 700D/Rebel T5i and read.
Title: Re: Canon 700D / T5i
Post by: sdelange99 on October 18, 2016, 05:30:59 PM
The firmware link didn't work as the Canon website only shows 1.1.5 now.

I downloaded the 1.1.5 file and looked at its filename (v115-t5i-700d-x7i-win.zip)
Then, searching Google for "v114-t5i-700d-x7i-win.zip download" I found a download link from the Canon Canada website.

Here's a link:
http://www.canon.ca/InetDD/downloadDriverOs.htm?sessionid=null&Families=45&Lines=7&Products=2201047&LANGUAGE=ENG&URL=http%3A%2F%2Fcanoncanada.custhelp.com%2Fapp%2Fanswers%2Flist%2Fp%2F918%252C819%2Fc%2F315&act=&actiontype=&contrl=os&OSid=33&languagecd=&contentid=&osid=# (http://www.canon.ca/InetDD/downloadDriverOs.htm?sessionid=null&Families=45&Lines=7&Products=2201047&LANGUAGE=ENG&URL=http%3A%2F%2Fcanoncanada.custhelp.com%2Fapp%2Fanswers%2Flist%2Fp%2F918%252C819%2Fc%2F315&act=&actiontype=&contrl=os&OSid=33&languagecd=&contentid=&osid=#)

Just installed it though the camera and then installed ML. It works fine now.
Title: Re: Canon 700D / T5i
Post by: dfort on October 19, 2016, 02:11:22 PM
@sdelange99 -- So no problems downgrading from 1.1.5 to 1.1.4? No gotchas? Good to know.

Did you by any chance notice improvements to autofocus in 1.1.5? Don't know if that's a fact or a rumor. The only thing 1.1.5 fixes is:

QuoteCorrects a phenomenon in which when using the camera with the EF-S 18-135mm f/3.5-5.6 IS USM or EF 70-300mm f/4-5.6 IS II USM lens, even if lens aberration correction is set to "Enable", correction will not be applied.
Title: Re: Canon 700D / T5i
Post by: sdeups on October 20, 2016, 12:22:01 PM
Hi, I have 2 questions. I'll buy the 700D but apparently the firmware is 1.1.5, is compatible with magic lantern?
and this software allows you to record movie continuously without time limit?

Thanks
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on October 20, 2016, 01:51:45 PM
1: No. Go to http://pel.hu/eoscard and download firmware 1.1.4.
2: RAW/MLV: Continuous recording.
H.264: You will loose some frames at 29:59.
Or use external HDMI recorder
Title: Re: Canon 700D / T5i
Post by: sdeups on October 20, 2016, 02:09:04 PM
Ok, thanks

It's better than buying a 700D Or full HD camcorder?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on October 20, 2016, 03:36:20 PM
Depends.
Title: Re: Canon 700D / T5i
Post by: sdeups on October 20, 2016, 03:50:26 PM
I am worth making beautiful photos and to record full HD over 30 minutes continuously
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on October 20, 2016, 05:24:26 PM
Seamless recording in H.264 beyond 29:59 not possible with or without ML.
Continuous 1080p recording in RAW/MLV not possible with 700D.
Title: Re: Canon 700D / T5i
Post by: sdeups on October 20, 2016, 05:26:19 PM
only 720p ?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on October 20, 2016, 05:28:10 PM
Yep!
Title: Re: Canon 700D / T5i
Post by: sdeups on October 20, 2016, 05:30:07 PM
Do you know a other device that enables 1080p continuously?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on October 20, 2016, 05:31:06 PM
The only one is 5D3
1080p: And recording time in 1080p using MLV/RAW is about 20 min using fast 128 GB CF-card ...
Title: Re: Canon 700D / T5i
Post by: dfort on October 20, 2016, 08:47:58 PM
Quote from: sdeups on October 20, 2016, 03:50:26 PM
I am worth making beautiful photos and to record full HD over 30 minutes continuously

Not sure what you mean by full HD but perhaps I can share my experience with the 700D. I bought one on ebay because it had a Zacuto finder that was worth the bid price. I was also working on the focus pixel fixing project (http://www.magiclantern.fm/forum/index.php?topic=16054.0) and thought I'd just sell the camera after I was finished with it. Although it wouldn't be my first choice over similar Canon DSLR's I kept it because it turned out to be quite a nice camera. The "full HD" 1920x1080 H.264 video quality is on par with the other APS-C cameras (except maybe the 7D series) but it is also limited by the hardware if you want to step up to MLV raw video. It can only record around 1280x720 raw video, it has moiré issues and if you want to record over 30 minutes in either raw video or with an external recorder it is going to take a huge amount of memory.

If you are really serious about Magic Lantern then by all means go for the 5D mark III if you can afford it. I've used this camera and can highly recommend it. If you are really serious about shooting video and must have the ability to record over 30 minutes look into a dedicated video camera. The first version of the C100 can be had for about the same price as a 5D mark III so get one of each if you can.

If you just want to play around and get your feet wet in Magic Lantern, then the 700D would be a good choice as would any of the supported models.

Then again if you aren't specifically looking at Magic Lantern or Canon then there are about a zillion other choices.
Title: Re: Canon 700D / T5i
Post by: sdeups on October 21, 2016, 06:21:16 PM
Strange because an friend told me that the 700d with ML allows video recording more than 30 minutes in full HD ..
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on October 21, 2016, 06:56:26 PM
Then ask your friend if he is able to provide a sample without about half a second gap at 29:59.
Title: Re: Canon 700D / T5i
Post by: basilescul on November 05, 2016, 04:53:02 PM
Hello magic lantern people!

Yesterday i got my brand new Canon 700d and today i installed magic lantern on it. It works very good so far but i have a little issue with it.  The issue i'm talking about is with the ISO and WB shortcuts on the display. I went into Pref menu in ML and into Misc key settings and turned on the LCD Sensor Shorcuts, also, checked Arrow/Set shortcuts to ISO and WB and it doesn't work. Yes i tried to restart my camera but still nothing.

What do you think about this?
Title: Re: Canon 700D / T5i
Post by: borja5200 on November 05, 2016, 04:54:08 PM
Hi! What's the meaning of the ºC that appear next to audio reccord level? Sometimes 50º appears in orange.
Title: Re: Canon 700D / T5i
Post by: basilescul on November 06, 2016, 03:00:06 PM
it is the temperature of the camera
Title: Re: Canon 700D / T5i
Post by: dfort on November 06, 2016, 05:51:07 PM
Quote from: borja5200 on November 05, 2016, 04:54:08 PM
Hi! What's the meaning of the ºC that appear next to audio reccord level? Sometimes 50º appears in orange.

That's the sensor temperature. Orange is a warning that it is running hot. You might want to shut down the camera and let it cool off a bit.

Quote from: basilescul on November 05, 2016, 04:53:02 PM
Yesterday i got my brand new Canon 700d...I went into Pref menu in ML and into Misc key settings and turned on the LCD Sensor Shorcuts, also, checked Arrow/Set shortcuts to ISO and WB and it doesn't work.

Great--did it come with firmware version 1.1.5? If it did I assume you managed to downgrade it to 1.1.4.

I have never used those shortcuts but they looked interesting so I tried them out and they aren't working here either. Any 700D user out there more familiar with these shortcuts mind commenting on this?
Title: Re: Canon 700D / T5i
Post by: basilescul on November 07, 2016, 10:17:08 PM
QuoteGreat--did it come with firmware version 1.1.5? If it did I assume you managed to downgrade it to 1.1.4.

Actually it came with firmware 1.1.4. 
Title: Re: Canon 700D / T5i
Post by: basilescul on November 15, 2016, 10:51:20 PM
I have another question for you guys.

Do you know why I can't choose the shutter speed of 1/48th instead of 1/50th?  I remember that I once worked with a Canon 60D with ML and I could do the 1/48th shutter speed.
Title: Re: Canon 700D / T5i
Post by: stevedraw on November 17, 2016, 12:03:14 AM
Hi guys,

Read the forum for a year or so now and it's full of great info and very helpful people. Thanks for all your suggestions, patience and time.

I just wanted to let people know DONT INSTALL THE CANON 1.1.5 FIRMWARE UPDATE!! It won't with ML even though a few functions weren't working in 1.1.4 so I updated (as they state in the user guide to newest canon firmware) and it doesn't work.

I just wanted to save anyone who was thinking about it some time.
Title: Re: Canon 700D / T5i
Post by: stevedraw on November 17, 2016, 01:03:02 AM
Also,

Are there any audio features from ML with the 700D? I had a look and couldn't find any and then saw some guys uploading codes but most were removed.

ML on my 600D had great audio features and I'm surprised the 700D build doesn't.

In conclusion, does anyone know how to use the goddamn LCD sensor to change ISO/Kelvin?!? (and maybe even audio levels..?)

Cheers
Title: Re: Canon 700D / T5i
Post by: axelcine on November 17, 2016, 10:25:41 PM
@stevedraw - http://www.magiclantern.fm/forum/index.php?topic=5951.msg154413;topicseen#msg154413 might help you. When the weather is right (no wind) the built-in mikes are excellent, and ML monitors audio with two bars in top of the display.
Good luck.
Title: Re: Canon 700D / T5i
Post by: stevedraw on November 18, 2016, 12:19:54 PM
@Axel Thanks very much for your reply and suggestion!

I read your previous post and agree with you completely. I never record audio from the built in mics. I have a rode videopro that does the trick nicely. I am going to purchase the Saramonic Smartrig + when I have some spare cash as I think that would be a perfect solution to the poor preamps in my DSLR.

I also found a module that one user kindly made and uploaded that offers an audio sub menu and some controls. I did see the levels on the screen but thought there would be a submenu like on my 600D which is superb.

My main issue now is getting the set button/lcd screen menu to work and stay open. I have set all the right parameters but sometimes the iso/kel menu shows up and sometimes it doesn't. And I have NO idea how to get the secondary part of that menu being the shutter speed and exposure change (av/tv) ....

If you or anyone knows how to set it up right I will be forever in your debt.

I'm going to donate the little that I can now because all ye magic lantern creators and modifiers(?) are doing fantastic work!
Title: Re: Canon 700D / T5i
Post by: stevedraw on November 18, 2016, 12:57:13 PM
Is that angry but highly intelligent and helpful Walter still around?

From reading all 39 pages of this forum he has been unbelievably patient and helpful with his answers and advice.

I just have one question for him - How I use Magic lantern? ... ;)

Seriously though if anyone kows how to work lcd screen iso/kel and tv/av options I will name my child after thee!

I think I might just have to do a reinstall?
Title: Re: Canon 700D / T5i
Post by: basilescul on November 19, 2016, 04:10:41 PM
did the reinstall a couple of times and still does not work
Title: Re: Canon 700D / T5i
Post by: cst on November 23, 2016, 09:01:43 PM
 LIVE VIEW mode trough hdmi can i record 1920x1080 or 1280x720? Or i need to crop, resize etc.. like 5mk2 ?


I have ninja 2!

Thanks
Title: Re: Canon 700D / T5i
Post by: basilescul on November 24, 2016, 06:45:04 PM
@cst: Here you are

https://www.magiclantern.fm/forum/index.php?topic=14095.0
Title: Re: Canon 700D / T5i
Post by: stevedraw on November 24, 2016, 11:29:30 PM
@basil Any joy figuring out our predicament? Looked all over the net and can't find any solution...

Anyone know how to use LCD menu with iso/kel controls and av/tv controls... ??
Title: Re: Canon 700D / T5i
Post by: basilescul on November 25, 2016, 06:36:05 PM
@steve still nothing... but do you know how can i set the shutter speed at 1/48th?
Title: Re: Canon 700D / T5i
Post by: stevedraw on November 27, 2016, 07:27:10 PM
@basil Balls! No man can't figure out how to get 1/48th either. The whole thing is really frustrating me now! i guess I'll keep sing my 600D for main camera and use 700D for secondary. i really like the STM lens though with silent, smooth focusing.

Now the menu has started popping up with just the av/tv controls!!
Title: Re: Canon 700D / T5i
Post by: a1ex on November 27, 2016, 07:34:19 PM
https://www.magiclantern.fm/forum/index.php?topic=5951.msg110054#msg110054
https://builds.magiclantern.fm/features.html -> look for shutter fine-tuning

;)
Title: Re: Canon 700D / T5i
Post by: dfort on November 27, 2016, 08:11:11 PM
@stevedraw @basilescul

Don't quite understand the obsession over 1/48 vs. 1/50. Back when I was working as a professional still photographer I had my shutter speeds calibrated by the legendary New York camera repairman, Marty Forscher and he explained to me what was within tolerance and what needed attention. The difference between 1/48 and 1/50 is insignificant.

1/48 = 0.020833333333333
1/50 = 0.02

The cameras you are comparing are probably rounding the shutter speed display differently.

[EDIT] When I switched career from still to motion picture I noticed that the "normal" 180 degree movie camera shutter at 24fps was 1/48 sec. while still cameras were calibrated in full stop increments: 1, 2, 4, 8, 15, 30, 60, 125, 250, 500, 1,000. See the rounding going on?
Title: Re: Canon 700D / T5i
Post by: blizerwin on November 30, 2016, 07:36:02 PM
Hey guys hope you can help me :D

I may that i missed those settings (or searched for the wrong informations via search function in this forum) ...

Can someone tell me how I can setup the sound settings for my 700D via ML? I know there where some settings in the 600D version (since my filmmate is using that cam).

Hope someone can help me.

LG Blizer
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on November 30, 2016, 09:11:59 PM
Only very limited options because DiGiC5 cams sound options not hacked yet. 600D is DiGiC4.
See Downloads https://builds.magiclantern.fm/features.html -> Audio
Title: Re: Canon 700D / T5i
Post by: stevedraw on December 01, 2016, 05:53:38 PM
@ A1ex Thanks for link to previous post explaining LCD menu. I had read that one before but checked I had set all the parameters correctly by the post again and noticed that everything was perfect. Then I read the bit about face sensor above viewfinder and figured it out. you have to move your thumb back and over tiny sensor, which I must admit I didn't see, to toggle menu! Thanks again!
Title: Re: Canon 700D / T5i
Post by: me.n.khof4sh on December 08, 2016, 06:30:06 PM
Hey guys. Is it impossible to get headphone monitoring on 700D?
Title: Re: Canon 700D / T5i
Post by: Znehr on December 13, 2016, 07:43:12 PM
Hey guys,

what is the easiest way to remove the focus pixel in raw? I need a solution that works with mac. I've spend a lot of time now with research, but still I havn't found out how to fix it. I know there are programms like "PinkDotRemover" but they only work on windows. Would be great if you could give me a simple and quick advise.

Thank you! :)
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on December 15, 2016, 04:30:08 PM
Browse http://www.magiclantern.fm/forum/index.php?topic=16054.0
or just try MLVFS.
Title: Re: Canon 700D / T5i
Post by: atpt on December 24, 2016, 09:08:47 PM
With ML and
Global Draw OFF
and Manual Focus
You can have a 700D with Clean HDMI out
Title: Re: Canon 700D / T5i
Post by: hyamjamie on December 30, 2016, 12:44:11 PM
Hi, I am new to ML and generally using DSLRs. Just purchased a 700D which came with firmware 1.1.5; is it safe/possible to downgrade to 1.1.4 or is there possibility of damage to the camera through this process?
If not then I may just have to wait it out to shoot video until an update is released if there is a possibility of that.
Title: Re: Canon 700D / T5i
Post by: Dihelson on January 05, 2017, 06:29:23 AM

Hello, Walter Schulz:

"1: No. Go to http://pel.hu/eoscard and download firmware 1.1.4.
2: RAW/MLV: Continuous recording.
H.264: You will loose some frames at 29:59.
Or use external HDMI recorder"

Hello, Walter, how are you ? It´s been a long time since I used my cameras along with Magic Lantern.I have some Canon 700D which are still using firmware 1.1.3. Reading your reply sbove, raised some questions:

01 - With firmware 1,1,3 will I have RAW/MLV continuous recording ?
02 - I intend to use my camera with an external HDMI recorder, or cpture card. Indeed, I used some time ago, but the problem is that it shuts down at 30 minutes or so. This "continuous recording" you mentioned can be used to record not internaly, but externaly through HDMI without interruption ? At 1080p on output ? using firmware 1.1.3 ? In order to upgrade my firmware to 1.1.4, should I uninstall Magic lantern first, format the card, upgrade firmware to 1.1.4 and so, make a fresh instalation of the latest Magic Lantern ?

Thank you in advance !



Title: Re: Canon 700D / T5i
Post by: dfort on January 05, 2017, 09:20:36 PM
Quote from: hyamjamie on December 30, 2016, 12:44:11 PM
...it safe/possible to downgrade to 1.1.4 or is there possibility of damage to the camera through this process?
If not then I may just have to wait it out to shoot video until an update is released if there is a possibility of that.

It is safe as long as you start with a freshly charged battery. Pretty much the worse that can happen is to interrupt the firmware update process by running out of juice.

There's no way to forecast if/when an ML update will be available for 1.1.5 and then you will still need to run the firmware update process to install it so what are you waiting for?
Title: Re: Canon 700D / T5i
Post by: gabew_34 on January 27, 2017, 11:05:39 PM
hey guys i was re-installing ML today, i had it before but it was a build from July 9th. I thought it would be a good time to format so i did. I installed the new unzipped nightly files for January 27th 2017. i followed all steps and whenever i went to update the software in the camera to activate ML bootflag and boot up it read the following message "Memory card containing firmware is required to update". I even tried using older builds, as well as downloading new canon 1.1.4 software to the card which allowed me to update the card but no ML. plz help i want my magic lantern back :'(
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on January 28, 2017, 12:40:42 PM
Format card in cam.
Copy extracted nightly build content to card and don't forget ML-SETUP.FIR!
Run firmware upgrade.
Title: Re: Canon 700D / T5i
Post by: nicT on January 31, 2017, 06:54:30 PM
Hey guys. First off, hats off to the devs and the guys who make ML what it is.
So I installed ML, 2016Nov10 Build on a 700D running 1.1.4 sometime late last year and so far so good.
Today I noticed a bug of sorts, although not exactly life threatening. When I switch to movie mode or live view
with the screen flipped out and facing the front, everything on the display appears mirrored. If I flip the screen
to face the rear then back, it fixes the orientation automatically. I've tried to recreate the problem in various other ways
and it doesn't happen any other time other than when switching from regular camera mode to Live View or Movie mode
and the screen is already flipped out and turned to face the front.
Here's a picture of it.
(https://s23.postimg.org/gc2jz8fej/700_D.jpg)
Title: Re: Canon 700D / T5i
Post by: dfort on January 31, 2017, 07:52:05 PM
Got the crop_rec module working on the 700D. If anyone want to play around with it I posted a build that includes 10bit/12bit recording on my bitbucket download page:

http://www.magiclantern.fm/forum/index.php?topic=17021.msg179368#msg179368

Still a work in progress. I just copied over the settings from the EOSM pull request (https://bitbucket.org/hudson/magic-lantern/pull-requests/762/crop_rec-add-limited-eosm-support-to/diff) so it doesn't have all the functions that the 5D3 version has.

More information about this on the Crop mode recording (crop_rec.mo) (1:1, RAW/H.264, 25/30/50/60 fps) (http://www.magiclantern.fm/forum/index.php?topic=17021.msg179368#msg179368) topic.
Title: Re: Canon 700D / T5i
Post by: dfort on February 08, 2017, 03:33:07 AM
Hey @nicT -- The bug is when the flip out screen doesn't appear mirrored. Found this on an official Canon website (https://support.usa.canon.com/kb/index?page=content&id=ART140445):

QuoteDuring Live View shooting or movie shooting, facing the LCD monitor toward the subject will display a mirror image on the screen.

Also on the official Canon websites you may have noticed that firmware version 1.1.4, which is the version supported by Magic Lantern, isn't available for download. It has been replaced with 1.1.5:

QuoteFirmware Version 1.1.5 incorporate the following fix:

Corrects a phenomenon in which when using the camera with the EF-S 18-135mm f/3.5-5.6 IS USM or EF 70-300mm f/4-5.6 IS II USM lens, even if lens aberration correction is set to "Enable", correction will not be applied.

In fact several cameras got this same update. There was a similar firmware update for the EOSM and since someone already did it and posted a pull request I thought I'd give it a try on the 700D and guess what, it wasn't that difficult. I was thinking about posting a how-to in case users who own the other cameras want to attempt it.

If you want the first kid on the block to try it out - make sure you've got your camera's boot flag set until a1ex makes an ML-SETUP.FIR for it. Run the firmware update and try it out. I posted a build on my bitbucket download area: [EDIT - a1ex made the new ML-SETUP.FIR]

https://bitbucket.org/daniel_fort/magic-lantern/downloads

Here's the pull request:

https://bitbucket.org/hudson/magic-lantern/pull-requests/813/update-to-700d115/diff
Title: Re: Canon 700D / T5i
Post by: Felipe on February 08, 2017, 08:01:55 PM
Great can you do the one for the 65D, T4i?
Title: Re: Canon 700D / T5i
Post by: mvrck on February 08, 2017, 08:03:08 PM
Hello, everyone! Got a 700D with 1.1.4 FW here and I'm willing to cooperate for testing things out. I'm very interested in this 'crop mode' and it's potential to get RAW video with enough resolution to upscale to 1080p with good results). I tried this build: "magiclantern-crop_rec.2017Jan31.700D114" and it works, however, I can't seem to get rid of the focus dots in MLVProducer (latest rev. 2722 alpha). They appear even in h264 video, if crop mode is enabled. Here's a screenshot:
(https://s27.postimg.org/ybogt2qqr/mlvproducer_screen2.png)
Title: Re: Canon 700D / T5i
Post by: dfort on February 08, 2017, 10:47:29 PM
Sorry, I don't have access to a 650D / T4i camera. When I get some time I'll write up a tutorial on how to do it.

If you are able to compile ML and can figure out one of the many methods of doing a disassembly on a ROM1.BIN file, do one disassembly of your current firmware and use the Portable ROM dumper (http://www.magiclantern.fm/forum/index.php?topic=16534.msg161097#msg161097) to get a ROM1.BIN of the updated firmware and disassemble it too. The rest is looking up changes. Check out the EOSM (https://bitbucket.org/hudson/magic-lantern/pull-requests/792/update-to-eosm-firmware-revision-203/diff) and 700D (https://bitbucket.org/hudson/magic-lantern/pull-requests/813/update-to-700d115/diff) pull requests to see where you're likely to encounter changes on your camera.
Title: Re: Canon 700D / T5i
Post by: Felipe on February 09, 2017, 12:37:49 AM
Thank you is because I noticed with the 100D update , the focus tracking became more efficient.
So I think the same will happen with this one.
Title: Re: Canon 700D / T5i
Post by: kd503_b on February 10, 2017, 06:57:21 AM
Hi, i have installed MagicLantern  and MLV raw, i have set the resolution to 1280x720 and the raw video works excellent! But my liveview is cropped around 2 times. And it is really hard to see, especially when i use manual lens. Is there any way to remove that crop and use the whole screen when i am recording raw video?
Title: Re: Canon 700D / T5i
Post by: burgerkrieg on February 13, 2017, 06:11:24 PM
  Good evening,

First, thanks DFort for this build, I've installed it but didn't managed to actually make it usable in Crop mode, the MLV output is squeezed horizontally, perhaps i've messed up the settings.I have tested the RAW capabilities of the 700D for 2 months now so I have the basic notions but I encounter one persistent error, no matter what resolutions or format I choose (MLV or RAW):
----------------------------------------------------------------------------
[87] raw_rec_task: NULL PTR (80c3e100,e1a00000)
pc=    ce28 lr=    ce28 stack=1abdd0+0x1000
entry=ae9620(0)
e1a00000 e59ff014 e59ff014 e59ff014
e59ff014 e1a00000 e59ff010 e59ff010
[87] raw_rec_task: NULL PTR (80c3e100,e1a00000)
pc=    ce28 lr=    ce28 sta

Magic Lantern version : Nightly.2017Jan31.700D114
Mercurial changeset   : d947ff9d0a8e (crop_rec-700D_experiments) tip
Built on 2017-01-31 18:31:49 UTC by rosiefort@RosieFoComputer.
Free Memory  : 119K + 2973K
-----------------------------------------------------------------------------
I am sorry if I post this in the wrong place.

One question: can I use "Movie crop mode" (the old one) in conjunction with "Silent picture"?Basically i want to use the 3X magnification in photo mode.Thanks


Title: Re: Canon 700D / T5i
Post by: mvrck on February 13, 2017, 09:54:31 PM
@burgerkrieg When you open the .mlv file in MLVProducer, make sure to check 'Scale 3X5'. That should fix the squished footage when using crop mode. I just want to ask, do you have the same problem with focusing pixels as I have (see above)?
Title: Re: Canon 700D / T5i
Post by: dfort on February 14, 2017, 12:09:52 AM
Focus Pixels? Ahhhhhh!!!!!!

http://www.magiclantern.fm/forum/index.php?topic=16054.0

Eventually all of the apps that process MLV files should be able to deal with the focus pixels.

Ok--I'll admit I'm a little behind on this but crop mode has introduced yet another interesting focus pixel pattern. This is cutting edge stuff so if you are using the "crop mode" module on the 700D you'll have to swap out the fpm file in MLVFS with the one posted in my ML Focus Pixel project (https://bitbucket.org/daniel_fort/ml-focus-pixels/src/1dac475a600f53e20e56be771e9d5be7a6c3f055/focus_pixel_map_files/fpm_archived/?at=default). I updated my fpm.sh script (https://bitbucket.org/daniel_fort/ml-focus-pixels/src/1dac475a600f53e20e56be771e9d5be7a6c3f055/fpm.sh?at=default&fileviewer=file-view-default) so Danne's  cr2hdr.app (https://www.magiclantern.fm/forum/index.php?topic=15108.0cr2hdr.app) will probably be able to handle 700D crop_rec files very soon.

Quote from: burgerkrieg on February 13, 2017, 06:11:24 PM
...the MLV output is squeezed horizontally, perhaps i've messed up the settings...

The LiveView squeezed horizontally (or stretched vertically) is "normal" but they shouldn't look stretched or squeezed after being processed into dng files.

As far as those raw_rec errors, exactly what steps are you taking? I can't seem to be able to reproduce that error.

Also note that we're trying to hit a moving target because mlv-lite is now included in the nightly builds and I'll be updating the 700D crop_rec build soon.

One thing that probably needs to be discussed in the crop_rec topic is how useful are the other crop_rec formats? So far I only included the EOSM features which are supposed to make up for the lack of mv1080 mode on that camera.
Title: Re: Canon 700D / T5i
Post by: Danne on February 14, 2017, 01:10:34 AM
Updated cr2hdr.app so if including 700D files a question will pop out if you have filmed with crop_rec or not. Should work with the mlvfs workflow as well included into cr2hdr.app.
Feel free to test and report. Don,t have any 700D files to test out.
https://bitbucket.org/Dannephoto/cr2hdr
Title: Re: Canon 700D / T5i
Post by: dfort on February 14, 2017, 02:17:28 AM
Quote from: Danne on February 14, 2017, 01:10:34 AM
Don,t have any 700D files to test out.

You do now  :D

Looks fine, at least just like the EOSM crop_rec files which is stretched vertically but focus pixels are gone. Like I said, this is experimental stuff.
Title: Re: Canon 700D / T5i
Post by: nicT on February 24, 2017, 10:32:06 AM
Hey @dfort

Thank you for that. I've read up a bit on it and I don't think that the mirrored screen bug
is anything to worry about. It  doesn't seem to affect anything else and it's just but a very
minor inconvenience, if we can call it that. Something I can live with. I think I'll stick to 1.1.4
so that I can continue playing around with ML.
I'm updating to the latest build as of today (Build 2017Feb19) and see what more I can do
with ML, and give feedback to help improve the builds.
I really appreciate what the devs are doing for the EOS community.
Title: Re: Canon 700D / T5i
Post by: hyamjamie on March 01, 2017, 04:01:05 PM
Just started using ML for 700D on 1.1.5, absolutely loving it especially the RAW video
Title: Re: Canon 700D / T5i
Post by: dfort on March 02, 2017, 01:17:07 AM
Good to hear it is working. Anyone else with a 700D/T5i running 1.1.5 firmware can give it a try. I'll keep a build on my bitbucket download area until it is merged:

https://bitbucket.org/daniel_fort/magic-lantern/downloads/
Title: Re: Canon 700D / T5i
Post by: neerajkt on March 15, 2017, 08:05:35 AM
I can't find a stable build for my Canon 700D/t5i running 1.1.4, all I can find are nightly builds which are pretty risky

Please give the link to a stable build or a the build number of a thoroughly tested nightly build as I can't risk bricking my camera(It's just 2 days old)

Thanks <3
Title: Bulb ramping is not in the menu ?
Post by: jarbi on March 18, 2017, 09:20:49 AM
Hi developers,

First of all thanks for all efforts to make ML work on the700D;-). One of the main reasons I have installed it because I make astro timelapse videos.
After activating ML I don't see where can I do "bulb ramping" on this camera ? I thought I would find it under Intervalometer but it's not there. Am I overlooking something here ?

Cheers,
Janos
Title: Re: Canon 700D / T5i
Post by: techlivemana on March 18, 2017, 03:31:31 PM
Quote from: dfort on March 02, 2017, 01:17:07 AM
Good to hear it is working. Anyone else with a 700D/T5i running 1.1.5 firmware can give it a try. I'll keep a build on my bitbucket download area until it is merged:

https://bitbucket.org/daniel_fort/magic-lantern/downloads/


Have installed it.. Looks good so far. Will update if I find any issues.


Sent from my iPhone using Tapatalk
Title: Re: Canon 700D / T5i
Post by: Yester on March 20, 2017, 01:03:40 AM
Hi. Is there ML for version 1.1.5 ??
Title: Re: Canon 700D / T5i
Post by: Audionut on March 20, 2017, 05:34:46 AM
Quote from: neerajkt on March 15, 2017, 08:05:35 AM
I can't find a stable build for my Canon 700D/t5i running 1.1.4, all I can find are nightly builds which are pretty risky

Please give the link to a stable build or a the build number of a thoroughly tested nightly build as I can't risk bricking my camera(It's just 2 days old)

Stable build | Latest builds (http://www.magiclantern.fm/forum/index.php?topic=14280.0)


Quote from: jarbi on March 18, 2017, 09:20:49 AM
After activating ML I don't see where can I do "bulb ramping" on this camera ? I thought I would find it under Intervalometer but it's not there. Am I overlooking something here ?

https://builds.magiclantern.fm/features.html

Quote from: Yester on March 20, 2017, 01:03:40 AM
Hi. Is there ML for version 1.1.5 ??

No.
Title: Re: Canon 700D / T5i
Post by: dfort on March 20, 2017, 06:47:54 AM
Quote from: Yester on March 20, 2017, 01:03:40 AM
Hi. Is there ML for version 1.1.5 ??

Yes. I have a pull request and a test build that you can try out. Please report your findings.

https://bitbucket.org/daniel_fort/magic-lantern/downloads/


Sent from my iPad using Tapatalk
Title: Re: Canon 700D / T5i
Post by: Audionut on March 20, 2017, 08:37:34 AM
You're to kind (or I'm to old and cranky).

Page had four posts, two of which had the (correct) answer.
Title: Re: Canon 700D / T5i
Post by: jarbi on March 23, 2017, 08:22:36 AM
Hi Daniel,

I run ML now with firmware 1.1.4, how can I go over to 1.1.5 and install your build ?

Cheers,
Janos
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on March 23, 2017, 08:27:10 AM
Install Canon firmware 1.1.5 and update card's files with build for 1.1.5.
Title: Canon 700D / T5i Pink and Blue focus dots
Post by: G4jima on March 31, 2017, 02:05:37 PM
Hi

love magic lantern but cant use raw video on the 700D here in college

no matter what i get RAW focus dots everywhere

tried all softwares shooting in manual just cant work it out

im using firmware 1.1.4

any assistance greatly appreciated
Title: Re: Canon 700D / T5i can't find and install Raw Rec Module
Post by: Emich on April 16, 2017, 02:39:30 PM
Hello,
I have problem with magic lantern software. I can't find raw rec module inside in software and after install it on my canon 700d.
Please help me find RAW REC Module and correct install it and make a right settings. I try find it inside on other versions for example in 5d /600d and others, but i find it only in magic lanter 1.1.5 wich i find here on your forum. But any way it work with errors and with bugs.
What can i do for my Rabel t5i for star write RAW video on my camera? Give me please correct link and any helpful information.
Thanks for help.

I have 700d with 1.1.4 software for body and 1.5.0 for lens. On youtube i saw a lot videos and all of them have this RAW Rec module, but not i am :(
Title: Re: Canon 700D / T5i
Post by: tihiandrew on April 24, 2017, 03:53:00 PM
anyone else running on firmware 1.1.5 with magic lantern  ? some feedback ?
Title: Re: Canon 700D / T5i
Post by: TobWag on April 27, 2017, 07:12:26 AM
Quote from: Emich
Hello,
I have problem with magic lantern software. I can't find raw rec module inside in software and after install it on my canon 700d.
Please help me find RAW REC Module and correct install it and make a right settings.

I have the same problem. Any help is greatly appreciated.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on April 27, 2017, 07:15:48 AM
Top of page -> Downloads -> Download Nightly Builds -> Features
raw_rec.mo has been replaced by mlv_lite.mo
Title: Re: Canon 700D / T5i
Post by: Fedya on April 29, 2017, 06:31:31 AM
Hello! Is it possible to return immediately to liveview (bypassing the black screen) after the shot in the mode silent picture. Because this greatly interferes with the remote shutter release (LCDsensor Remote, Audio RemoteShot). Thank you and sorry for my English
Title: Re: Canon 700D / T5i
Post by: badweather on April 30, 2017, 09:57:17 AM
Quote from: dfort on March 20, 2017, 06:47:54 AM
Yes. I have a pull request and a test build that you can try out. Please report your findings.

https://bitbucket.org/daniel_fort/magic-lantern/downloads/


Sent from my iPad using Tapatalk

Just installed ML for the first time on my 700D 1.1.5. Thank you for the work you did on this version.

I'll give it a try, but I Like it already.
Title: Re: Canon 700D / T5i
Post by: developerphp on May 02, 2017, 10:21:12 AM
Good afternoon. Is it possible in ML to control the speed of autofocus in the video mode, as in 70D in the standard firmware? I use mostly manual autofocus, but sometimes in traffic when shooting shooting is very short of normal autofocus.
Title: Re: Canon 700D / T5i
Post by: krisdeak on May 03, 2017, 10:32:17 AM
Quote from: dfort on March 02, 2017, 01:17:07 AM
Good to hear it is working. Anyone else with a 700D/T5i running 1.1.5 firmware can give it a try. I'll keep a build on my bitbucket download area until it is merged:

https://bitbucket.org/daniel_fort/magic-lantern/downloads/

Hey Daniel & devs,

I was curious about your opinion - do you think lossless raw compression will be possible on the 700D anytime soon?
I know you guys are working hard to crack this problem...

I think I can safely say a lot of us are super excited about the prospect of shooting full-width raw video continuously on our 700D's (even if it's just 1:2.35 aspect) - which is not currently possible due to the SD card speed limitation.

Thanks a lot for your hard work and updates! :-)





Title: Re: Canon 700D / T5i
Post by: Walter Schulz on May 03, 2017, 12:11:44 PM
ML development has no schedules, release dates.
Title: Re: Canon 700D / T5i
Post by: esinem on May 03, 2017, 01:14:52 PM
[3. post your flickering issue at bitbucket providing a link to a short sample video made with your smartphone. No green confirmation box for 700D available.
[/quote]

Here's a camera phone video, uploaded to Google Photos https://goo.gl/photos/uSNzKkPPewfC41cn8 (https://goo.gl/photos/uSNzKkPPewfC41cn8), of the flickering on my recently bought 700D. Relieved to find from earlier posts that it's not a camera fault.

I hope it can be sorted on the 700D as I use Magic Zoom a lot on my 550D and love it.
Title: Re: Canon 700D / T5i
Post by: dfort on May 03, 2017, 07:51:34 PM
Hey @krisdeak -- this is an open source project and much of the discussion about new developments are out in the open so please feel free to jump in and see if you can help figure out some of this stuff.

The 700D lossless compression discussion starts about here:

http://www.magiclantern.fm/forum/index.php?topic=18443.msg182973#msg182973

You're more than welcome to look at what I've been trying on bitbucket:

https://bitbucket.org/daniel_fort/magic-lantern/branch/compressed_raw-700D-EOSM#commits

Don't worry if you don't know how to code. I still don't know C, thought I'm learning. Maybe we're almost there and one address is transposed or something like that.
Title: Re: Canon 700D / T5i
Post by: krisdeak on May 04, 2017, 12:43:10 AM
Thanks Daniel, good to hear the possibility is still there. Fingers and toes crossed!!
I didn't want to sound like I'm rushing anyone - I hugely appreciate your work (and Walter's and of course A1ex's) and just got a bit excited.

I'm afraid I'm no coder at all - I can barely grasp what's being talked about in that thread....
Sounds like it's not as straightforward as a simple porting exercise (not that I could do that), with the model differences and all.
I see it's probably a lot of hit and miss before one can find those right addresses to call.

If I can be of any help outside of actual coding, please do let me know.
Title: Re: Canon 700D / T5i
Post by: jeefo254 on May 13, 2017, 12:13:55 AM
Hello. I seem to have a problem with my 700D. I installed ML a bunch of times, on different cards even one formatted fat32, one exfat32 (didn't know the difference at the time). Yesterday the camera was working, with issues but working. Today it won't start. After much fiddling around I discovered that it's not completely dead. The shutter does work, the flash works, the LCD doesn't. If I leave the button to on, remove the battery and then re-inserted while is still in ON position the shutter will work for 6 or 7 times, the focus works, changing the ISO aperture and shutter speed does work while looking through the viewfinder. Please help me if you can. I hope it is a booting issue because the symptoms are the same with or without the SD cards. Thanks!
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on May 13, 2017, 09:08:33 AM
Backup card's autoexec.bin and copy "portable display test" autoexec.bin to card.
https://www.magiclantern.fm/forum/index.php?topic=2296.0

- Remove battery
- Insert card and close compartment
- Insert battery and close compartment

Does LCD show some info? If not: Remove battery, remove card and report back.
Title: Re: Canon 700D / T5i
Post by: jeefo254 on May 13, 2017, 01:40:48 PM
No the test didn't work. The display didn't show anything. Worth to mention that this morning after leaving it all night without the battery or the card in it after I inserted the battery and turned it on the display turned on but it didn't show anything on it and the Live View button did move the mirror when I pressed it but the display didn't change . Whilst it was still on, I inserted the card and it went back to the previous behavior. 
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on May 14, 2017, 02:12:06 AM
Just to make sure:
- LCD is not working at all. Not even for a short term.
- The card is prepared for ML and cam's bootflag is set. You can test it by renaming autoexec.bin. If the card is prepared for ML, bootflag is set and autoexec.bin missing cam will get stuck at startup. You will not be able to shot.

Please confirm.

What happens if you connect a monitor via HDMI?
Title: Re: Canon 700D / T5i
Post by: jeefo254 on May 14, 2017, 05:08:42 PM
Right now the LCD is not working at all. Not even the back light is powering on. The card is prepared for ML. Right now it's got the settings from when it worked, I've tried without ML on the card, I've tried EOScard, I've tried with the software update on the card and nothing, it will not power on. The LED light flashes whenever I insert the card and the shutter does work 6 times before showing busy message in the viewfinder but the photos won't appear on the card. And sometimes when on Auto mode the flash will fire, and on other modes the flash trigger works and the flash fires on half button press. Something that bothers me is that the shutter will not work if I had the card and the battery in the camera before I've turned it on. It works only if the card was in the camera and I removed and reinserted the battery or if the card wasn't in the camera and while I leave it on I put the card in it will still work a bunch of times before, again, showing the busy message.

I went I bought an mini HDMI adapter to try and see if anything happens and still nothing. I'm pretty stuck basically..
(https://thumb.ibb.co/mGOGBQ/Untitled.jpg) (https://ibb.co/mGOGBQ)

best online image hosting (https://imgbb.com/)
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on May 17, 2017, 02:35:32 PM
You are telling me LCD is not working at all. And you are telling me about a busy message.

Is the LCD working (=showing some kind of information) sometimes (=under certain circumstances) or not?
Title: Re: Canon 700D / T5i
Post by: a1ex on May 17, 2017, 03:22:34 PM
If the shutter makes noise with the portable display test on the card, that means the card is not bootable (in other words, the test was not loaded). After loading*) and displaying the test screen, it should lock up, forcing you to take the battery out in order to get any more signs of life (such as LED blinks) outside the viewfinder.

*) at this step, a short LED blink may or may not be visible, depending on camera model; would be nice if another 700D owner could check.

The viewfinder is controlled by another processor, and whatever it does during the display test (no signs at all, busy, or whatever) is model-dependent, not controllable by ML, and thus not relevant for the test.

You can also try this (just curious why the pictures are not saved to the card): http://builds.magiclantern.fm/jenkins/view/Experiments/job/startup-log/12/

(it would blink the LED for the first 30 seconds, then save a log file that contains all the debug messages from Canon)
Title: Re: Canon 700D / T5i
Post by: jeefo254 on May 17, 2017, 03:42:16 PM
I've managed to get the portable display test to work. It lights up the lcd backlight even with the power switch set to off, and that's it. No info on the display, just the light and a stuck pixel  :)
Title: Re: Canon 700D / T5i
Post by: a1ex on May 17, 2017, 03:44:40 PM
That means, it's very likely a hardware issue. Not much to do at this point - just for curiosity, you can now run the startup logger as well, but I don't think it will be of any help.
Title: Re: Canon 700D / T5i
Post by: jeefo254 on May 17, 2017, 04:10:54 PM
Ok, thanks very much for all the help guys. I've just contacted a repair service here in my town. I thought maybe I could fix it on my own. Anyway, thanks again!

ps the starup logger doesn't work.. bummer
Title: Re: Canon 700D / T5i
Post by: Fedya on May 30, 2017, 11:28:19 AM
Quote from: Fedya on April 29, 2017, 06:31:31 AM
Hello! Is it possible to return immediately to liveview (bypassing the black screen) after the shot in the mode silent picture. Because this greatly interferes with the remote shutter release (LCDsensor Remote, Audio RemoteShot). Thank you and sorry for my English
Unfortunately, my question remained unanswered. Tell me, please, how can I fix this bug? Or is it impossible? Thank you!
Title: Re: Canon 700D / T5i
Post by: dfort on May 31, 2017, 03:23:11 AM
Quote from: Fedya on May 30, 2017, 11:28:19 AM
Unfortunately, my question remained unanswered. Tell me, please, how can I fix this bug? Or is it impossible? Thank you!

It isn't a bug and it isn't specific to the 700D, it is the same on all cameras. A while back it was a problem for a user who was using an EOSM on a DIY film scanner. You can read about it here:

http://www.magiclantern.fm/forum/index.php?topic=19005.msg180531#msg180531

I made a special FRSP_LiveView_Option EOSM build and put it on my bitbucket download page (https://bitbucket.org/daniel_fort/magic-lantern/downloads/). I'm sure the same "fix" or hack will work for the 700D.
Title: Re: Canon 700D / T5i
Post by: Fedya on May 31, 2017, 06:34:27 AM
Quote from: dfort on May 31, 2017, 03:23:11 AM
It isn't a bug and it isn't specific to the 700D, it is the same on all cameras. A while back it was a problem for a user who was using an EOSM on a DIY film scanner. You can read about it here:

http://www.magiclantern.fm/forum/index.php?topic=19005.msg180531#msg180531

I made a special FRSP_LiveView_Option EOSM build and put it on my bitbucket download page (https://bitbucket.org/daniel_fort/magic-lantern/downloads/). I'm sure the same "fix" or hack will work for the 700D.
Thank you very much! But, I do not quite understand, I need to install the build magiclantern-FRSP_LiveView_Option.2017Mar14.EOSM202.zip on 700D, or just fix (hack)? If the second, then where to find this fix (hack) and how to install it?
Title: Re: Canon 700D / T5i
Post by: dfort on June 01, 2017, 05:10:21 AM
The fix/hack is here: https://bitbucket.org/daniel_fort/magic-lantern/branch/silent_FRSP_fix

I just tried it on the 700D and it seems to work fine. The screen does blank out when you take a picture and it is saved to the card but LiveView returns without having to do a second half-shutter press. The default is to blank out the screen so you need to turn on the return to LiveView option.

(https://c1.staticflickr.com/5/4200/34180083664_16a5592f5b_z.jpg)

I put a build on my bitbucket downloads page (https://bitbucket.org/daniel_fort/magic-lantern/downloads/). It is named magiclantern-FRSP_LiveView_Option.2017May31.700D114.zip

Title: Re: Canon 700D / T5i
Post by: Fedya on June 01, 2017, 11:33:26 AM
dfort, thank you very much! Everything is working. You really helped me out! :D :D :D
Title: Re: Canon 700D / T5i
Post by: eddereire on June 07, 2017, 11:24:21 AM
Hey guys.

I am doing a creative project in Work.

Shooting pictures in RAW in live view works fine.
But the moment I enable Ghost Images in live view and take a few shots I get a Dump of

"ML ASSERT:
lv
at ../../src/raw.c:1854 (raw_lv_request), task livev_hiprio_task
lv:0 mode:3"

Could anyone help me with this? Or tell me how to remove the console from the screen once this happens?
I have to restart the camera to get this message to disappear.
Title: Re: Canon 700D / T5i
Post by: oeci on June 08, 2017, 09:24:44 PM
Quick question: What's the state of the port of Magiclantern for the latest Firmware? I know that nobody can tell me when exactly it will be available but maybe someone knows if it's already on it's way to become an official nightly or if it still needs more testing.
Title: Re: Canon 700D / T5i
Post by: dfort on June 11, 2017, 01:44:57 AM
@oeci

The latest firmware is working fine but it needs more testers and feedback on the pull request (https://bitbucket.org/hudson/magic-lantern/pull-requests/813/update-to-700d115/diff). You can get a test build from my bitbucket download page (https://bitbucket.org/daniel_fort/magic-lantern/downloads/).

Looks like the latest build posted is magiclantern-Nightly.2017Feb08.700D115.zip. Anything new in unified that affects the 700D that should be merged for testers?
Title: Re: Canon 700D / T5i
Post by: xorpi on June 13, 2017, 10:36:08 AM
Quote from: dfort on June 11, 2017, 01:44:57 AM
@oeci

The latest firmware is working fine but it needs more testers and feedback on the pull request (https://bitbucket.org/hudson/magic-lantern/pull-requests/813/update-to-700d115/diff). You can get a test build from my bitbucket download page (https://bitbucket.org/daniel_fort/magic-lantern/downloads/).

Looks like the latest build posted is magiclantern-Nightly.2017Feb08.700D115.zip. Anything new in unified that affects the 700D that should be merged for testers?

Good day. I have to say that after a long time, when I once again put the chance of ML due to a startrails / milkiway photography, so the version for the current, the latest canon firmware works ok.
Title: Re: Canon 700D / T5i
Post by: clubsoda on June 19, 2017, 11:31:37 PM
 :-[ :-[ :'( :-\ :-\Help me please! So it looks like i just bricked my 700d. Oh Jesus. So i had magic lantern on my camera installed firmware was 1.1.4. Then i launched the normal 1.1.5 update by accident without uninstalling magic lantern. Now my camera boots to the screen "model detection error" (see the attached picture) If i take out the card to boot normally or to do anything with a fresh card, my camera wont boot at all --> black screen. The only thing i can do is go back to this error screen by putting ml files back to the card. I can't get my camera out of this state by myself. Please help me i need my camera.
(https://thumb.ibb.co/cnB7dQ/20170619_232609.jpg) (https://ibb.co/cnB7dQ)
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 20, 2017, 07:53:34 AM
Format card in cardreader and proceed.
Title: Re: Canon 700D / T5i
Post by: Benjaxeye on June 24, 2017, 06:09:46 PM
Hello, I'm having some trouble archieving 1280x720 @24fps MLV RAW 2.0 continous. I have read and seen that it's possible with this camera, however my recording stops at about 27 seconds. My SD card is an original SanDisk Extreme 95 mb/s UHS-3, and I have done some benchmark tests and my write speed is at about 41 mb/s in playback mode, but when recording RAW it drops at about 31-32 mb/s. I can record perfectly in MLV_lite with a write speed of 36.5 mb/s. Is there any reason I can't get MLV 2.0 to work @720 24fps in my cam?
Title: Re: Canon 700D / T5i
Post by: dfort on June 26, 2017, 03:19:33 AM
Quote from: Benjaxeye on June 24, 2017, 06:09:46 PM
...Is there any reason I can't get MLV 2.0 to work @720 24fps in my cam?

Have you tried turning global draw off? Also, what exactly are your settings? Canon menu at 1080p/24 and resize in the ML menu or are you using 720p/60 and changing frame rate to 24fps in ML?
Title: Re: Canon 700D / T5i
Post by: Benjaxeye on June 27, 2017, 06:32:49 AM
Quote from: dfort on June 26, 2017, 03:19:33 AM
Have you tried turning global draw off? Also, what exactly are your settings? Canon menu at 1080p/24 and resize in the ML menu or are you using 720p/60 and changing frame rate to 24fps in ML?

Yes, I have global draw turned off, and pretty much anything else is the default magic lantern settings. In canon menu I selected the option 1920x1080p/24 fps and I resize it to 1280x720 at the Magic Lantern menu; no fps override. With that I get a write speed of 31.5 average. The other settings you mention (720p/60, override to 24) actually give me very consistent recording, even at 1504x846 16:9 aspect ratio, but the caveat is that it squishes the footage by 1.67x; leaving me with a resolution of 1504x508. I'm affraid the stretch will make me lose quality and add to the already somewhat tedious post processing, and I still avereage at 31.5 write speed.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 28, 2017, 02:56:44 AM
Card is formatted with ExFAT file system?
Title: Re: Canon 700D / T5i
Post by: Benjaxeye on June 28, 2017, 08:50:29 PM
Quote from: Walter Schulz on June 28, 2017, 02:56:44 AM
Card is formatted with ExFAT file system?

Yes! ExFat 128 kilobit format, and I dont format in camera, so it doesnt go back to fat32
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 28, 2017, 11:53:33 PM
 Make sure to have loaded MLV_REC.MO only.
Select Canon video settings for 1920p 24fps.
Use ML menu to record 1280x720.
Use ML menu to run 24 fps (fps override).

Record and report back.
Title: Re: Canon 700D / T5i
Post by: Benjaxeye on June 29, 2017, 08:30:22 PM
Quote from: Walter Schulz on June 28, 2017, 11:53:33 PM
Make sure to have loaded MLV_REC.MO only.
Select Canon video settings for 1920p 24fps.
Use ML menu to record 1280x720.
Use ML menu to run 24 fps (fps override).

Record and report back.

Just did three tests, still 31-32 avg write speed, max 25 seconds recording.

Here's all my settings:

- Canon menu:

Image quality: RAW
Beep: Enable
Release shutter without card: ON
Image review: 2 sec

Lens aberration correction: Disable
Exposure comp.: 0
Auto lighting optimizer: Off
Custom white balance: no image
WB Shift/Bkt.: 0,0/+-0
Color space: sRGB
Picture style: Neutral (with prolost flat)

AF Method: :-) + Tracking (but I have lens on manual focus)
Movie servo AF: Enable
AF w/shutter button during rec: ON
Grid display: Off
Metering timer: 16 sec.

Movie rec size: 1920x1080 24 fps
Sound recording: Auto (wind filter and attenuator disabled)
Video Snapshot: Disable

Histogram Disp: RGB (but I have canon's gui disabled)
Ctrl over HDMI: Disable

Select folder: 100CANON
File Numbering: Continuous
Auto Rotate: On

Auto power off: 15 min
LCD Brightness: Middle
LCD auto off: Enable
Video System: NTSC

Screen color: 2
Feature guide: Enable
Touch control: Disable
Sensor cleaning: auto cleaning enable
Custom Functions: all in 0
Firmware ver.: 1.4.4


- Magic Lantern menu:

-Expo:
White balance: Auto
ISO: 800
Shutter: 1/50.01,173 degrees
Aperture: 1.8
Picture style: Neutral (with prolost flat)
Expo Lock: Off
Expo Presets: Off
Expo Override: Off
ExpSim: Movie

- Overlay:
Global draw: Off

- Movie (non listed are off)
FPS override: 23.973
   -Desired fps: 24 (from 24)
   -Optimize for: Exact fps
   -Actual fps: 23.973
   -Rolling shutter: 16.5 us/ line
Raw video (MLV): ON, 1280x720  2.18x
   Resolution: 1280x720   2.18x
   Aspect ratio: 16:9
   Global Draw: Off
   Frame skipping: Off
   Preview Options: Hacked No Prev
   Status when recording: Icon
   Files >4GiB (exFAT): On
   Use SRM Job Memory: On
   Extra hacks: Off
   Buffer fill method: 4
   Reserve card space: ON
Movie tweaks:
   Force LiveView: Start & CPUlens

- Shoot: all off

- Focus: all default

- Display: all off except
Advanced settings (not mentioned means its default):
   Screen layout 16:9 HDMI,t/b
   Orientation: Reverse
   Auto Mirroring: dont allow

- Prefs:
Power saving in LiveView:
   Enable power saving: on Standby
   Use LCD sensor: ON

- Modules: only mlv_rec is OK

- Debug:
Free Memory: 127k + 3272K
Image buffers: 720x480, 960x639
Shutter count: 12k = 5044+7019
Internal Temp: 50 C, 122 F, 175 raw
   
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on June 29, 2017, 09:42:40 PM
Which is your highest resolution/data rate for continuous recording with MLV_RAW?
Title: Re: Canon 700D / T5i
Post by: Benjaxeye on July 06, 2017, 06:06:48 AM
Quote from: Walter Schulz on June 29, 2017, 09:42:40 PM
Which is your highest resolution/data rate for continuous recording with MLV_RAW?

Sorry for the late response. Well, that would be 1280x582 (aspect ratio 2.20:1)
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on July 06, 2017, 08:41:51 AM
Just about 31 MByte/s. Some 20 percent missing ...
Two tests:
1) Don't use FPS override and twist resolution to find out highest data rate for continuous recording without.
2) Use settings you listed above with an older build. One year old would be fine. Try to twist data rate above 31.

I cannot cross test with my 650D right this week.
Title: Re: Canon 700D / T5i
Post by: phillveber on July 14, 2017, 09:12:28 PM
Hello, is there any way to set sound monitoring to my 700D?
Suddenly, there are some assemblies of enthusiasts ..
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on July 15, 2017, 08:30:16 AM
Not available for Digic 5 cams: https://builds.magiclantern.fm/features.html -> Audio
Title: Re: Canon 700D / T5i
Post by: phillveber on July 15, 2017, 11:40:03 PM
I know that the support for 700D sound monitoring does not work on ML, but there are probably those who changed the source and there are test versions.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on July 16, 2017, 09:09:54 AM
Here you go: https://bitbucket.org/hudson/magic-lantern/branch/new-sound-system
Title: Re: Canon 700D / T5i
Post by: Matze on July 20, 2017, 01:46:39 PM
Hi,

i hope, this is the right forum.

I'm currently use ML with Canon 700d (firmware 1.1.5) and the latest nightly build.
I've only tested the intervalometer and it worked fine with the canon 50mm 1.8 und 18-55mm STM lenses.
Yesterday i tried it with the Tamron AF SP 70-300mm 4-5.6 Di VC USD and the cam crashed.
Camera was on, Liveview active und i've only zoomed in -> Picture in LiveView freezed and there were no functions anymore although the cam was working  even if i tried to turn the camera of and on.
The only thing which helped was to remove the battery.

Sorry for my bad english :)

Title: Re: Canon 700D / T5i
Post by: Walter Schulz on July 20, 2017, 04:08:44 PM
Is your problem reproducable?
Title: Re: Canon 700D / T5i
Post by: dfort on July 20, 2017, 04:13:28 PM
Quote from: Matze on July 20, 2017, 01:46:39 PM
i hope, this is the right forum.

I'm currently use ML with Canon 700d (firmware 1.1.5)...

The topic specifically for the 1.1.5 firmware is this one:

http://www.magiclantern.fm/forum/index.php?topic=19831.0

Could you please try reproducing the issue on firmware 1.1.4 and report back? You can find the Canon firmwares here:

https://bitbucket.org/daniel_fort/magic-lantern/downloads/700D%20Canon%20Firmware%20for%20Testers.zip
Title: Re: Canon 700D / T5i
Post by: mebitek on August 06, 2017, 11:04:22 AM
Hi guys,
I'm pretty new to magic lanter and canon cameras. I succesfully installed on my Canon 700d and I enjoy a lot of magic lantern features.
I find pretty useful this shortcuts:

1- av + gear -> chage aperture
2- wb + gear -> change shutter speed

however I cannot find how to set the ISO. I also tried the arrow set pref option but I cannot use it (I read on this thread to active it by using the face sensor above the viewfinder but I'm not sure how to do it)

can someone please help me?
thanks a lot
Title: Re: Canon 700D / T5i
Post by: mebitek on August 07, 2017, 03:06:22 PM
Hi, after that I found how activate arrows keys (be sure to enable lcd auto off) I notice that my values indicators are always white and not green in certain conditions (my 180 degree rules is perfect but my shutter speed is not green)
how to achieve that?
Title: Re: Canon 700D / T5i
Post by: ErwinH on August 08, 2017, 02:49:13 PM
Using lossless compression I was able to record around 300 frames of 1716x964 @ 25 fps.

The way you light your scene has a large impact in the compression rate of the codec. A dark frame reaches a way higher compression rate then an overexposed scene.

I don't want to share a build, because I get warnings saying I might have encountered the null pointer bug.
Title: Re: Canon 700D / T5i
Post by: a1ex on August 08, 2017, 03:09:11 PM
Quote from: ErwinH on August 08, 2017, 02:49:13 PM
I get warnings saying I might have encountered the null pointer bug.

May I take a look at your ROM? That's on the current crop_rec_4k codebase, right?

(it's probably a false warning, but let's check it first)
Title: Re: Canon 700D / T5i
Post by: ErwinH on August 08, 2017, 03:15:51 PM
That's correct, the crop_rec_4k codebase.

You have the ROM in your PM.
Title: Re: Canon 700D / T5i
Post by: ErwinH on August 12, 2017, 10:13:40 AM
Been testing the crop_rec_4k code on the 700d and I must say, I'm impressed. The card speed of the camera is a little slow for continuous recording at higher resolutions, but at least it's a lot better then uncompressed recording.

I don't know why I recieved the null pointer bug warning, but when running the test script on a 600D I received the same error message.

To get the crop_rec_4k branch compiled I copied some define's from the 5D3, which appear to work, but can probably be optimized. These values were:
DEFAULT_RAW_BUFFER
DEFAULT_RAW_BUFFER_SIZE
RAW_LV_BUFFER_ALLOC_SIZE

Can I get some hints where to look for the correct values?
Title: Re: Canon 700D / T5i
Post by: Danne on August 12, 2017, 10:32:11 AM
Hm, this would probably work on the eosm too? Not a lot of time on my hands here but exactly where and what was changed here?
Title: Re: Canon 700D / T5i
Post by: ErwinH on August 12, 2017, 10:43:09 AM
ProcessTwoInTwoOutLosslessPath is an important part to get lossless 14bit working.

I had a quick look at the 600D, but haven't find the setargs and the resources part yet.
Title: Re: Canon 700D / T5i
Post by: Danne on August 12, 2017, 11:12:22 AM
Maybe you could share sources for 700D build changes?
Title: Re: Canon 700D / T5i
Post by: ErwinH on August 12, 2017, 11:38:32 AM
You can find the ProcessTwoInTwoOutJpegPath for the 700D here. http://www.magiclantern.fm/forum/index.php?topic=18443.msg188163#msg188163

Since I'm unsure about the values above, I won't share a full build.
Title: Re: Canon 700D / T5i
Post by: mebitek on August 14, 2017, 02:21:14 PM
for all people having high temperature reported (over 50 celsius):

I recently bought a battery grip and the temperature decrease incredibly and nvere touch the yellow warning. With an outside temperature of 35° the camere touch just rarely the 40° also using overlays and autofocus
Title: Re: Canon 700D / T5i
Post by: dfort on September 14, 2017, 04:44:44 AM
Need to verify this with another 700D user -- turn on selftest module and try running the Stubs API test. Is it able to complete the test and save a log?

I was trying to run it on the 700D.115 update like I did several months ago but it kept getting stuck. Downgraded to 114 with the same results.
Title: Re: Canon 700D / T5i
Post by: eNnvi on September 14, 2017, 07:51:20 AM
Hi dfort, tell me where I can find your build and I'll test (I need a build cause I lost everything on my PC. Faulty disk :( )
Title: Re: Canon 700D / T5i
Post by: dfort on September 15, 2017, 01:25:21 AM
@eNnvi - no need for any special build, the selftest module is included in the unified branch. The 1.1.5 pull request was merged recently so we should all update our Canon firmware in order to work with the latest nightly build.
Title: Re: Canon 700D / T5i
Post by: dfort on September 15, 2017, 07:27:45 AM
Ok--looks like a1ex cleaned up things when he merged my pull request. All tests passed on the Stubs API Test. Yay!

Inherited an issue from 114, can't save lossless compressed full resolution silent pictures so there's still work to be done.
Title: Re: Canon 700D / T5i
Post by: janbravo on October 06, 2017, 01:35:37 PM
Clean HDMI / Clear overlays.
Sorry if this has already been answered elsewhere - can't seem to find a recent answer.
I need to connect an Atomos recorder via HDMI.
Will CLEAR OVERLAYS make it a Clean output? Will any cropping happen or will the quality or resolution suffer in any other way?
Do you have any input towards the experience of using external recorders like Atomos?
Thanks
Title: Re: Canon 700D / T5i
Post by: ErwinH on October 17, 2017, 01:57:56 PM
I've been testing h264 proxy and mlv_snd recording on my 700D and I'm either missing something or running into some errors.

I want to have some sort of audio track to be able to sync 3 recordings (2 camera's and a screen capture)

Recording H264 proxy is hit or miss, especially using lossless recording, but even 12bps or 10bps isn't stable. I get flickering, pink artifacts, pink bars. After some recordings the live view goes black, and restarting gives bars on the screen.
Recording 1280x720@10bbp makes the camera freeze after 35-50 seconds. I'm running crop_rec_4k.2017Oct16.700D115

Using mlv_rec with mlv_snd records but at the end of the record it errors with: "audio failed to stop 4" error. This is after the first recording, and the camera "softlocks"with a busy notification.

I'll do some more research, but was curious if there were others with the same issues.
Title: Re: Canon 700D / T5i
Post by: Danne on October 17, 2017, 02:08:53 PM
QuoteUsing mlv_rec with mlv_snd records but at the end of the record it errors with: "audio failed to stop 4" error.
This issue is supposed to be fixed somewhere around here:
https://bitbucket.org/hudson/magic-lantern/commits/f9c3d6e7f8ee36490f65dd09c1ae172878a5ce76

What ML build are you using?
Title: Re: Canon 700D / T5i
Post by: ErwinH on October 17, 2017, 02:11:09 PM
Sorry, edited my post a bit.

I'm running: crop_rec_4k.2017Oct16.700D115

Lowering the bitrate (to 0.1x) for the video seems to help a bit. Recording for almost 3 minutes now.

Edit: I stopped the recording after 7 minutes.

Restarting a recording is hit or miss. Sometimes the live view is dark, sometimes it's the normal live view.
Title: Re: Canon 700D / T5i
Post by: Danne on October 17, 2017, 02:34:06 PM
But is mlv_rec + mlv_snd itself giving problems with audio or is the problem only related to when recording h.264 proxy with mlv_rec + mlv_snd?
Title: Re: Canon 700D / T5i
Post by: ErwinH on October 17, 2017, 02:52:43 PM
Mlv_lite with proxy is the combination I'm testing atm.

1280x720@10b ran for 8:22 before the camera crashed.

Mlv_rec + mlv_snd isn't usable because the audio won't stop.
Title: Re: Canon 700D / T5i
Post by: ErwinH on October 17, 2017, 04:15:10 PM
Another issue is, the files (MVI_xxxx.DAT and IMG_xxxx.MLV) are empty when the camera crashes. This is using the MLV_lite module with H264 proxy enabled.
Title: Re: Canon 700D / T5i
Post by: dfort on October 17, 2017, 11:26:36 PM
Quote from: ErwinH on October 17, 2017, 02:52:43 PM
Mlv_rec + mlv_snd isn't usable because the audio won't stop.

Really? That was recently fixed on the crop_rec_4k branch. Make sure you are using the latest experimental build.

I haven't been able to get H.264 proxy working on anything except a 5D3.113.
Title: Re: Canon 700D / T5i
Post by: Danne on October 17, 2017, 11:37:21 PM
Seems he´s using yesterdays build:
http://www.magiclantern.fm/forum/index.php?topic=5951.msg191794#msg191794
Title: Re: Canon 700D / T5i
Post by: dfort on October 17, 2017, 11:46:30 PM
More to test when I get home tonight.
Title: Re: Canon 700D / T5i
Post by: dfort on October 18, 2017, 05:51:20 AM
Quote from: ErwinH on October 17, 2017, 02:52:43 PM
Mlv_rec + mlv_snd isn't usable because the audio won't stop.

Just tested that same build and mlv_rec + mlv_snd is working fine. Checked out the various modes and audio is starting and stopping--no problem.

Ok, well there is a problem with mlv_rec starting recording when Movie crop mode is on:

(https://farm5.staticflickr.com/4462/37508448840_87068b685a.jpg) (https://flic.kr/p/Z9uB4N)

The debug menu shows this:

(https://farm5.staticflickr.com/4460/37057784334_31655f65c3.jpg) (https://flic.kr/p/YsEQd7)

This is not a new issue and I reported on it before (http://www.magiclantern.fm/forum/index.php?topic=19300.msg190836#msg190836). This only affects mlv_rec in the crop_rec_4k branch, mlv_lite is fine with Movie crop mode.

[EDIT] Yeah, I know. I should be trying to fix bugs like this instead of playing around with cameras that I don't own.  :o
Title: Re: Canon 700D / T5i
Post by: ErwinH on October 19, 2017, 09:29:07 AM
Quick test, did a recording using mlv_rec with mlv_snd on the crop_rec_4k branch, same as two days ago.

I can record fine, and I end up with the following files:
M19-0910.M00
M19-0910.M01
M19-0910.M02
M19-0910.M03
M19-0910.M04
M19-0910.M05
M19-0910.M06
M19-0910.MLV


But when I stop the recording I get the famous "Audio failed to stop: 4" error, the RAW video option in the movie menu says "Stopping..." and ML is "stuck". Can't shutdown the camera, can't start another recording.
(https://thumb.ibb.co/bUayWR/VRAM1.png) (https://ibb.co/bUayWR)

I was using the following settings:
(https://thumb.ibb.co/cUXOy6/VRAM2.png) (https://ibb.co/cUXOy6)

Edit:
I think I found the source of the problem. I was recording in 8kHz (since I only need some audio to sync, and don't want to waste to much bandwidth) and when I stop the recording the camera returns "Audio failed to stop: 4". Returning the setting to 48kHz eliminates the problem.
Title: Re: Canon 700D / T5i
Post by: dfort on October 19, 2017, 09:10:25 PM
Quote from: ErwinH on October 19, 2017, 09:29:07 AM
I think I found the source of the problem. I was recording in 8kHz (since I only need some audio to sync, and don't want to waste to much bandwidth) and when I stop the recording the camera returns "Audio failed to stop: 4". Returning the setting to 48kHz eliminates the problem.

Interesting. Never tested for that. You can try uncommenting the stubs but that breaks the audio meters.


Sent from my iPhone using Tapatalk
Title: Re: Canon 700D / T5i
Post by: ErwinH on October 19, 2017, 09:58:09 PM
It was easier to switch to an earlier version which gave the same result. Recording at 48khz works fine, with error but works fine,recording at 8khz doesn't work. Output of the wave file from mlvdump is 2khz large or empty.

Haven't tested any other samplerates yet. Will do so tomorrow.
Title: Re: Canon 700D / T5i
Post by: dfort on October 20, 2017, 05:48:12 PM
Reproduced using your settings:

(https://farm5.staticflickr.com/4467/37813679641_3babb92672.jpg) (https://flic.kr/p/ZBsZxP)

Looks like the problems I reported with Movie crop mode.

http://www.magiclantern.fm/forum/index.php?topic=5951.msg191830#msg191830

http://www.magiclantern.fm/forum/index.php?topic=19300.msg190836#msg190836

The EOSM is also affected so that means it might be the same on the 650D and 100D. Sorry, I'm not sure how to fix it. Did you say it is working on older crop_rec_4k builds? When did it break? (Which build works for you.)
Title: Re: Canon 700D / T5i
Post by: ErwinH on October 20, 2017, 08:40:32 PM
I cannot put my finger on it. One thing I noticed is that the samplerate must be 48khz to work. With mlv lite I can only use 44k1 and 48khz. Otherwise there is no audio.

The different versions don't have much effect on the result other then the obvious.
Title: Re: Canon 700D / T5i
Post by: Danne on October 24, 2017, 09:49:54 PM
I have the same issues describe around movie crop mode on the 100D. WHen I hit record it starts to flicker, nothing gets recorded, when deselecting raw video and trying to exit Movie crop mode I end up with freezed screen and needs a battery pull.
Title: Re: Canon 700D / T5i
Post by: Lago0n on October 28, 2017, 11:46:31 PM
Hi,

What is the highest resolution possible for continuous 50/60p shooting right now? I downloaded the crop_rec_4k.2017Oct28.700D115 build and can see I need to enable crop_rec.mo (I can't seem to zoom in like the 5d so am not sure if this is needed) and mlv_lite for lossless 10bit files.

I'm on 720p 50p canon video settings and it does say 1736x688 @ 50/60p with 3x3 pixel binning on the experiments page but I'm am unable to get useable frames so far, they're all overexposed with pink dots on the highlights in the latest build of MLVproducer.

Thanks.
Title: Re: Canon 700D / T5i
Post by: dfort on October 29, 2017, 03:06:43 PM
Quote from: Lago0n on October 28, 2017, 11:46:31 PM
...I'm am unable to get useable frames so far, they're all overexposed with pink dots on the highlights in the latest build of MLVproducer.

The crop_rec module on the 700D is still very experimental. The pink dots are the focus pixels  (http://www.magiclantern.fm/forum/index.php?topic=16054.0)that show up on raw video with certain cameras. The focus pixel map files for crop rec have gone through some changes recently and only a few applications are using the latest version.

You are using MLVProducer so you're most likely running Windows. Try mlv_dump on steriods (http://www.magiclantern.fm/forum/index.php?topic=18975.0) to see if that removes the focus pixels. Also, give AWPStar some file samples so he can get the focus pixel map files for crop_rec working on MLVProducer.
Title: Re: Canon 700D / T5i
Post by: Lago0n on October 29, 2017, 11:27:35 PM
Quote from: dfort on October 29, 2017, 03:06:43 PM
You are using MLVProducer so you're most likely running Windows. Try mlv_dump on steriods (http://www.magiclantern.fm/forum/index.php?topic=18975.0) to see if that removes the focus pixels. Also, give AWPStar some file samples so he can get the focus pixel map files for crop_rec working on MLVProducer.

Thanks, I'll give mlv_dump on steriods a go and I've found the focus pixels are removed when I select the 1808 x 727 preset on MLVProducer.
Title: Re: Canon 700D / T5i
Post by: ErwinH on November 02, 2017, 10:21:05 AM
Small issue:
When recording with internal microphone first and connecting a microphone in between shots, the audiometers still capture the internal microphone.
Title: Re: Canon 700D / T5i
Post by: dfort on November 02, 2017, 02:01:24 PM
You mean if you plug in a microphone without restarting the camera it won't switch over to the microphone? Can you check and see if this happens without ML?
Here's how to get to the meters using the Canon menus:

(https://farm5.staticflickr.com/4498/38112561821_6218756e67.jpg) (https://flic.kr/p/214SQNR)

(https://farm5.staticflickr.com/4484/24260400278_327d500aa8.jpg) (https://flic.kr/p/CXNTMq)
Title: Re: Canon 700D / T5i
Post by: madz on November 05, 2017, 11:48:35 PM
Hello 700D owners,

I'm thinking of buying 700D as main camera, and there is one thing I want to check first. Does it shoot 48+ fps 10/12/14bit RAW/ lossless? And if it does, what approx. resolution it can reach?

Thanks.
Title: Re: Canon 700D / T5i
Post by: dfort on November 06, 2017, 10:27:07 PM
Quote from: madz on November 05, 2017, 11:48:35 PM
Does it shoot 48+ fps 10/12/14bit RAW/ lossless?

If you have an EOSM you can try the crop_rec module and push up the FPS override a bit to approximate what you will be able to get on the 700D. Internally these cameras are very similar, same sensor, focus pixels, SD card write speed, etc. The big difference between the two cameras is being able to record mv1080 on the 700D but you can't push that to 48+ fps. What exactly are you expecting out of the 700D?
Title: Re: Canon 700D / T5i
Post by: madz on November 07, 2017, 09:43:23 AM
Quote from: dfort on November 06, 2017, 10:27:07 PM
If you have an EOSM you can try the crop_rec module and push up the FPS override a bit to approximate what you will be able to get on the 700D. Internally these cameras are very similar, same sensor, focus pixels, SD card write speed, etc. The big difference between the two cameras is being able to record mv1080 on the 700D but you can't push that to 48+ fps. What exactly are you expecting out of the 700D?

I'm quite happy with the EOS-M, the only thing I miss is slow-mo. And it's VERY slow in photo mode.
I tried to get 50fps on EOS-M on few latest experimental crop_rec with h.264 proxy enabled, but no luck. On lossless I get console warnings, and on 10/12/14bit RAW just black or corrupted frames.
IIRC 50fps can be only reached from m720, does 700D has m720 with 3x3 option?

So my goal is something like 10bit RAW 1280x536 48/50fps with 3x3 binning, so I wanted to know does it work already on 700D, because on EOSM it doesn't, at least for me at this moment.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on November 07, 2017, 10:20:16 AM
This one requires lossless compression. EOS M and 700D do share the same card interface specs: SDR50/UHS50 (about 50 MByte/s). Without compression required bandwidht exceeds 40 MByte/s (pure RAW/MLV without H.264 proxy) and I haven't seen continuous recording at this rate.
Title: Re: Canon 700D / T5i
Post by: madz on November 07, 2017, 01:06:43 PM
Quote from: Walter Schulz on November 07, 2017, 10:20:16 AM
This one requires lossless compression. EOS M and 700D do share the same card interface specs: SDR50/UHS50 (about 50 MByte/s). Without compression required bandwidht exceeds 40 MByte/s (pure RAW/MLV without H.264 proxy) and I haven't seen continuous recording at this rate.

I'm fine with compression, I'm fine with 8-bit, I just wasn't able to get it working on EOS-M at 50fps. And continuous is not necessary, about 60 seconds would be enough.
I was testing at 960x402px different combinations of bit depth and compression, it tops at 32MiB/s with 14bit no compression, and no luck :(

I thought that 700D might have more progress in shooting 50fps, since it have "native" m720 mode, on EOS-M it's only turns on with h264 proxy, without it it's only 30fps.
Title: Re: Canon 700D / T5i
Post by: dfort on November 07, 2017, 05:23:33 PM
Quote from: madz on November 07, 2017, 09:43:23 AM
So my goal is something like 10bit RAW 1280x536 48/50fps with 3x3 binning, so I wanted to know does it work already on 700D, because on EOSM it doesn't, at least for me at this moment.

Ok, that's reasonable. I just tested it and the 700D can do a little better than that. Continuous recording at 1280x694 50fps with 10-bit lossless compression with crop_rec 3x3 is possible. I just ran a test.

mlv_dump -v
File Header (MLVI)
    FPS         : 50.000000
    File        : 0 / 0
    Frames Video: 3767
    Frames Audio: 0
...
Block: RAWI
...
    Res:  1280x694
...
Block: RAWC
...
      sampling        3x3 (read 1 line, skip 2, bin 3 columns)


The only other APS-C small camera that can do the crop_rec with lossless compression thing is the 100D so you do have options. I've been trying to get other cameras ported but they are "blind" ports because I don't have access to these cameras. (I also don't know what I'm doing but that doesn't keep me from trying.) The 650D is already in the code base (https://bitbucket.org/hudson/magic-lantern/pull-requests/872/crop_rec_4k-for-650d104/diff) and there is a pull request open for the 6D (https://bitbucket.org/hudson/magic-lantern/pull-requests/875/crop_rec_4k-for-the-6d116/diff) but there are some issues that still need to be ironed out with these cameras.

[EDIT] Uploaded a screenshot. Note that the estimate isn't showing green but I am getting continuous recording with these settings.

(https://farm5.staticflickr.com/4463/26470423209_d8836df796.jpg) (https://flic.kr/p/Gk6QB4)
Title: Re: Canon 700D / T5i
Post by: madz on November 08, 2017, 01:13:58 AM
Quote from: dfort on November 07, 2017, 05:23:33 PM
I just tested it and the 700D can do a little better than that. Continuous recording at 1280x694 50fps with 10-bit lossless compression with crop_rec 3x3 is possible.

Well this sounds promising. Thank you for your time running a test.

Quote from: dfort on November 07, 2017, 05:23:33 PM
The only other APS-C small camera that can do the crop_rec with lossless compression thing is the 100D so you do have options.

If won't find 700d for a good price (I really like an articulating screen), will definitely go for 100d (hey, same battery as EOS-M, got bunch of them). Thanks again!
Title: Re: Canon 700D / T5i
Post by: mhimhi on November 20, 2017, 08:52:19 PM
Hi guys. I read a lot i still cannot figure out how to get 10 bit raw on my 700d. Can someone tell me how? Thank you.
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on November 20, 2017, 09:10:56 PM
Top of page -> Downloads -> Downloads (drop down menu) -> Experiments -> 10/12-bit RAW video
Title: Re: Canon 700D / T5i
Post by: Kharak on November 26, 2017, 10:15:34 AM
is there a visible difference between colum binning and line skipping,i assume it was line skipping before the experimental build. 

I just installed ml on a friends 700d and was wondering about the colum binning, is it like a mini 5d3 now, low moire and aliasing? And is the colum binning standard now when recording raw?

Also the link to firmware 115 in the download section is dead. You can get the file from CanonUSA website.
Title: Re: Canon 700D / T5i
Post by: a1ex on November 26, 2017, 10:42:06 AM
ML does not change the pixel binning pattern (http://www.magiclantern.fm/forum/index.php?topic=16516.0); it just records it in the MLV metadata (http://www.magiclantern.fm/forum/index.php?topic=17021.msg181639#msg181639). Even in the new modes introduced by crop_rec, it still does not change the binning pattern - if it's going to combine 3x3 pixels into one, there's only one way the hardware can do this. It's model-dependent - 5D3 averages in analog domain all the 9 pixels, most other models simply throw away two lines and average in analog domain the remaining 3 pixels (hence, line skipping and column binning).

It might be possible to change the start line/column for the binned pixels (would be useful for super-resolution) or to sample only one pixel from a 3x3 block, but I have no idea where to start looking. In any case, the averaging (binning) is likely done with analog electronics (https://www.magiclantern.fm/forum/index.php?topic=16608.msg174433#msg174433).
Title: Re: Canon 700D / T5i
Post by: Kharak on November 26, 2017, 11:41:39 AM
Okey, I thought it was weird (and amazing) that you could change the way the sensor records the information.

Just did some test shots on the 700D and its max resolution, non-crop, and I am very surprised how good the quality is. Except the Focus Pixels ruin it. I need to find a software that has FP Removal, I got rid of them with 2x2 chroma but looks like it introduces a lot of artifacts where Lines and other fine textures crosses the removed focus pixels.

Either way, I think my friend is gonna be thrilled with his new camera ;)
Title: Re: Canon 700D / T5i
Post by: dfort on November 28, 2017, 06:31:39 AM
Quote from: Kharak on November 26, 2017, 11:41:39 AM
I need to find a software that has FP Removal, I got rid of them with 2x2 chroma but looks like it introduces a lot of artifacts where Lines and other fine textures crosses the removed focus pixels.

What are you using that causes artifacts with chroma smoothing? Software that deals with the focus pixels includes Switch (http://www.magiclantern.fm/forum/index.php?topic=15108.0), MLVFS (http://www.magiclantern.fm/forum/index.php?topic=13152.0), MLV Producer (http://www.magiclantern.fm/forum/index.php?topic=15271.0), mlv_dump on steroids (http://www.magiclantern.fm/forum/index.php?topic=18975.0) and there are probably a few others.
Title: Re: Canon 700D / T5i
Post by: Danne on November 28, 2017, 07:14:19 AM
Probably batch_mlv. Needs an update to work with 700D I think.
Title: Re: Canon 700D / T5i
Post by: Kharak on November 28, 2017, 07:48:09 PM
Sorry, I did not see you replied to this.

Yes, was using Batch_MLV. I will try that newest version of MLV Producer.

I got some issues testing the 700D 28th Oct build. Using only the Lossless recording.

The camera records at 23,973 and no matter what I've tried in FPS override I can not get it to 23,976 or 24,000. Its not much difference but it's there. EDIT: I just found out that setting the Canon Recording to 1080p 25p makes the Framerate right again, it was on 1080p 24p. Now I can set it to 23.976 , 24p and 25p.

I can not set WB by pushing the WB button and all the other buttons around the SET button dont seems to react to anything in movie mode. They do work for navigating ML or Canon Menu though.

I am not used to the 700D, its not mine, maybe these buttons are not supposed to work in Movie mode. For instance the AF and "Shooting mode" button, sorry I dont know what it is called, might not be of any importance in movie mode. But WB and Picture Profile do not work in movie mode.

When playing MLV's in camera, I could not play any other MLV except for the last shot MLV, scroll wheel did not react. And after a while I could not play any MLV,. Only a black screen came up. But the LED was blinking as if it was playing the MLV's.
Title: Re: Canon 700D / T5i
Post by: dfort on January 25, 2018, 05:09:22 AM
Some new findings that affect the 700D. Don't want to double, or triple or...post so I'll just point to this post:

https://www.magiclantern.fm/forum/index.php?topic=19300.msg196350#msg196350
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on January 25, 2018, 12:59:52 PM
It worked nicely on 700D
Also I noticed this
Quote from: Danne on January 25, 2018, 07:58:04 AM
Your commit also let´s 1080 become 1082 every other time while scrolling for bigger aspect ratios.
We hope compile it with mlv_snd build.
thanks!
Title: Re: Canon 700D / T5i
Post by: miketraum on February 09, 2018, 03:25:09 AM
Hey guys,
I am a new ML user, with a question Ive researched before posting this, but couldnt find a solid yes or no. With the T5i, is it possible to shoot RAW in 1080? The write speed on my card is 40mb/s. I apologize if this has already been answered!
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on February 09, 2018, 01:14:25 PM
Hey @miketraum
Yes you can shoot continuous 1080p RAW video on T5i.
The actual resolution will be 1736x976 You have to upscale it to 1080p, This what Canon does in H.264 video.
You have to select 12-bit lossless from mlv_lite settings to make it continuous recording (Write speed will be about 35mb/s) on 23.976fps.
And the build for shooting continuous RAW video under "4K raw video recording; lossless compression" in experiments page: (scroll down)
https://builds.magiclantern.fm/experiments.html
Title: Re: Canon 700D / T5i
Post by: dfort on February 09, 2018, 03:35:40 PM
Quote from: miketraum on February 09, 2018, 03:25:09 AM
...With the T5i, is it possible to shoot RAW in 1080?...

Yes but as theBilalFakhouri pointed out, if you use the camera normally it will give you an actual resolution of 1736x976. However, if you use the zoom mode by pressing the magnifying glass button until you get to 5x LiveView the camera can bet set to 1920x1080 in that mode.

Quote from: miketraum on February 09, 2018, 03:25:09 AM
...The write speed on my card is 40mb/s....

That might work but I find that the faster 95MB/s UHS-I cards are more reliable when recording raw video on this camera.
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on February 11, 2018, 12:55:43 PM
dual_iso ISOless ( 8 ) & (15) err finally solved for Canon 700D that have this problem!
Check this post:
https://www.magiclantern.fm/forum/index.php?topic=7139.msg197139#msg197139
Title: Re: Canon 700D / T5i
Post by: a1ex on February 11, 2018, 01:26:22 PM
Nice!

Can other 700D users confirm the issue? Was it also present on 1.1.4?
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on February 11, 2018, 01:50:32 PM
Quote from: a1ex on February 11, 2018, 01:26:22 PM
Was it also present on 1.1.4?
The issue was since 1.1.3, I had tried all the firmware 1.1.3\ 1.1.4\ 1.1.5 and a lot of nightly change logs builds for dual iso, nothing worked.
Title: Re: Canon 700D / T5i
Post by: dfort on February 11, 2018, 05:49:28 PM
@theBilalFakhouri - I haven't been able to reproduce the issue. Which branch? What steps are you taking?
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on February 11, 2018, 05:56:10 PM
@dfort Here the  Steps (https://www.magiclantern.fm/forum/index.php?topic=7139.msg197146#msg197146)
The branch was used is crop_rec_4k_mlv_lite_snd
EDIT: Also  this  (https://bitbucket.org/hudson/magic-lantern/issues/1781/650d-dual_iso-isoless-ph-err-2) helped me to define what is the problem.
Title: Re: Canon 700D / T5i
Post by: dfort on February 11, 2018, 06:14:51 PM
I was trying to reproduce the ISOless err( 8 ) & ( 15 ) using the "official" crop_rec_4k_mlv_lite_snd experimental build. You are using adtg_gui in those instructions to find the register values so I'll need to compile that branch with CONFIG_GDB and CONFIG_GDBSTUB, right? I'll dig into this when my wife finishes celebrating her birthday--last year it took a week!
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on February 11, 2018, 06:27:20 PM
Quote from: dfort on February 11, 2018, 06:14:51 PM
so I'll need to compile that branch with CONFIG_GDB and CONFIG_GDBSTUB, right? I'll dig into this when my wife finishes celebrating her birthday--last year it took a week!
No. actully I didn't do anything with CONFIG_GDB and CONFIG_GDBSTUB, only I have changed the registers in dual_iso.c after I get them.
Haha, Don't miss her, go now and happy birthday :D
Title: Re: Canon 700D / T5i
Post by: dfort on February 13, 2018, 08:51:48 PM
Quote from: a1ex on February 11, 2018, 01:26:22 PM
Can other 700D users confirm the issue? Was it also present on 1.1.4?

I can't reproduce the issue but it looks like there might be a difference between cameras. This doesn't make any sense to me but here is what I found out:

https://www.magiclantern.fm/forum/index.php?topic=7139.msg197238#msg197238
Title: Re: Canon 700D / T5i
Post by: Edgley on April 06, 2018, 12:52:55 AM
Hi,
I have a chance to return a Nikon (D3200) I'm not very happy with its video quality, and swap for a 700D and 50mm 1/8 lens.
As I have been a Nikon owner since forever, I have no idea how good this combo is.

I am looking to do limited video work, want depth of field and that creamy look.
Any video will be used along with footage shot with a Blackmagic Cinema Camera, everything run through Resolve to edit/colour/grade.

thanks for any advice :)
Simon.
Title: Re: Canon 700D / T5i
Post by: kye on April 07, 2018, 03:03:45 PM
Quote from: Edgley on April 06, 2018, 12:52:55 AM
Hi,
I have a chance to return a Nikon (D3200) I'm not very happy with its video quality, and swap for a 700D and 50mm 1/8 lens.
As I have been a Nikon owner since forever, I have no idea how good this combo is.

I am looking to do limited video work, want depth of field and that creamy look.
Any video will be used along with footage shot with a Blackmagic Cinema Camera, everything run through Resolve to edit/colour/grade.

thanks for any advice :)
Simon.

700D + 50mm 1.8 is a great combo, but depends on what you are shooting. 
50mm on this camera is equivalent to 80mm on full-frame, so it's not an all-purpose lens.
If you get a fast card ML with quality setting of 3x can be used, but I've found it's not that much better than 1x quality.
ML RAW works at lower resolutions and is great.

If you want to see image quality, just google for test footage.
Title: Re: Canon 700D / T5i
Post by: dfort on April 18, 2018, 10:10:29 PM
Since the 700D is very similar to the 650D I used it to help with some firmware update testing on the 650D (https://www.magiclantern.fm/forum/index.php?topic=7473.msg200166#msg200166). Finally got a complete lua Scripts API Tests log:

===============================================================================
ML/SCRIPTS/API_TEST.LUA - 2018-4-18 12:40:37
===============================================================================

Strict mode tests...
Strict mode tests passed.

Generic tests...
arg = table:
  [0] = "API_TEST.LUA"
camera = table:
  shutter = table:
    raw = 112
    apex = 7.
    ms = 8
    value = 0.007812
  aperture = table:
    raw = 48
    apex = 5.
    value = 5.6
    min = table:
      raw = 37
      apex = 3.625
      value = 3.5
    max = table:
      raw = 80
      apex = 9.
      value = 22.6
  iso = table:
    raw = 0
    apex = 0
    value = 0
  ec = table:
    raw = 0
    value = 0
  flash = true
  flash_ec = table:
    raw = 0
    value = 0
  kelvin = 5200
  mode = 3
  metering_mode = 3
  drive_mode = 0
  model = "Canon EOS REBEL T5i"
  model_short = "700D"
  firmware = "1.1.5"
  temperature = 156
  gui = table:
    menu = false
    play = false
    play_photo = false
    play_movie = false
    qr = false
    idle = true
  reboot = function: p
  shoot = function: p
  bulb = function: p
  burst = function: p
  wait = function: p
event = table:
  pre_shoot = nil
  post_shoot = nil
  shoot_task = nil
  seconds_clock = nil
  keypress = nil
  custom_picture_taking = nil
  intervalometer = nil
  config_save = nil
console = table:
  hide = function: p
  show = function: p
  write = function: p
  clear = function: p
lv = table:
  enabled = true
  paused = false
  running = true
  zoom = 1
  overlays = 2
  pause = function: p
  stop = function: p
  info = function: p
  resume = function: p
  start = function: p
  wait = function: p
lens = table:
  name = "EF28-105mm f/3.5-4.5 USM"
  focal_length = 30
  focus_distance = 1410
  hyperfocal = 8518
  dof_near = 1224
  dof_far = 1666
  af = true
  af_mode = 0
  autofocus = function: p
  focus = function: p
display = table:
  idle = nil
  height = 480
  width = 720
  on = function: p
  screenshot = function: p
  pixel = function: p
  draw = function: p
  clear = function: p
  rect = function: p
  print = function: p
  off = function: p
  line = function: p
  load = function: p
  circle = function: p
  notify_box = function: p
key = table:
  last = 10
  press = function: p
  wait = function: p
menu = table:
  visible = false
  new = function: p
  set = function: p
  close = function: p
  block = function: p
  select = function: p
  open = function: p
  get = function: p
movie = table:
  recording = false
  start = function: p
  stop = function: p
dryos = table:
  clock = 133
  ms_clock = 133087
  image_prefix = "IMG_"
  dcim_dir = table:
    exists = true
    create = function: p
    children = function: p
    files = function: p
    parent = table:
      exists = true
      create = function: p
      children = function: p
      files = function: p
      parent = table:
        exists = true
        create = function: p
        children = function: p
        files = function: p
        parent = nil
        path = "B:/"
      path = "B:/DCIM/"
    path = "B:/DCIM/100CANON/"
  config_dir = table:
    exists = true
    create = function: p
    children = function: p
    files = function: p
    parent = table:
      exists = true
      create = function: p
      children = function: p
      files = function: p
      parent = table:
        exists = true
        create = function: p
        children = function: p
        files = function: p
        parent = nil
        path = "B:/"
      path = "ML/"
    path = "ML/SETTINGS/"
  ml_card = table:
    cluster_size = 32768
    drive_letter = "B"
    file_number = 2949
    folder_number = 100
    free_space = 30504160
    type = "SD"
    path = "B:/"
    _card_ptr = userdata
  shooting_card = table:
    cluster_size = 32768
    drive_letter = "B"
    file_number = 2949
    folder_number = 100
    free_space = 30504160
    type = "SD"
    path = "B:/"
    _card_ptr = userdata
  date = table:
    yday = 108
    sec = 42
    isdst = false
    year = 2018
    hour = 12
    day = 18
    wday = 4
    month = 4
    min = 40
  directory = function: p
  remove = function: p
  call = function: p
  rename = function: p
interval = table:
  time = 10
  count = 0
  running = false
  stop = function: p
battery = table:
function not available on this camera
stack traceback:
[C]: in ?
[C]: in for iterator 'for iterator'
ML/SCRIPTS/LIB/logger.lua:125: in function 'logger.serialize'
ML/SCRIPTS/API_TEST.LUA:36: in function <ML/SCRIPTS/API_TEST.LUA:35>
[C]: in function 'globals.xpcall'
ML/SCRIPTS/API_TEST.LUA:35: in function 'globals.print_table'
ML/SCRIPTS/API_TEST.LUA:81: in function 'globals.generic_tests'
ML/SCRIPTS/API_TEST.LUA:1338: in function 'globals.api_tests'
ML/SCRIPTS/API_TEST.LUA:1364: in main chunktask = table:
  create = function: p
  yield = function: p
property = table:
Generic tests completed.

Module tests...
Testing file I/O...
Copy test: autoexec.bin -> tmp.bin
Copy test OK
Append test: tmp.txt
Append test OK
Rename test: apple.txt -> banana.txt
Rename test OK
Rename test: apple.txt -> ML/banana.txt
Rename test OK
File I/O tests completed.

Testing Canon GUI functions...
Enter MENU mode...
Exit MENU mode...
Enter MENU mode...
Enter MENU mode...
Enter PLAY mode...
Exit PLAY mode...
Pause LiveView...
Resume LiveView...
Enter MENU mode...
Exit MENU mode...
Pause LiveView...
Enter PLAY mode...
Enter PLAY mode...
Enter PLAY mode...
Exit PLAY mode...
Pause LiveView...
Enter PLAY mode...
Enter MENU mode...
Exit MENU mode...
Pause LiveView...
Enter PLAY mode...
Enter MENU mode...
Enter MENU mode...
Enter PLAY mode...
Exit PLAY mode...
Enter MENU mode...
Enter PLAY mode...
Enter PLAY mode...
Exit PLAY mode...
Pause LiveView...
Enter MENU mode...
Enter MENU mode...
Exit MENU mode...
Stop LiveView...
Enter PLAY mode...
Enter MENU mode...
Enter MENU mode...
Exit MENU mode...
Start LiveView...
Enter PLAY mode...
Enter MENU mode...
Exit MENU mode...
Pause LiveView...
Enter PLAY mode...
Enter PLAY mode...
Enter PLAY mode...
Enter PLAY mode...
Exit PLAY mode...
Stop LiveView...
Enter MENU mode...
Enter MENU mode...
Enter PLAY mode...
Enter PLAY mode...
Enter MENU mode...
Exit MENU mode...
Start LiveView...
Pause LiveView...
Resume LiveView...
Pause LiveView...
Resume LiveView...
Enter PLAY mode...
Enter PLAY mode...
Enter MENU mode...
Exit MENU mode...
Enter MENU mode...
Enter PLAY mode...
Exit PLAY mode...
Stop LiveView...
Enter MENU mode...
Enter MENU mode...
Enter MENU mode...
Enter PLAY mode...
Exit PLAY mode...
Start LiveView...
Enter MENU mode...
Exit MENU mode...
Pause LiveView...
Resume LiveView...
Enter MENU mode...
Canon GUI tests completed.

Testing ML menu API...
Menu tests completed.

Testing picture taking functions...
Snap simulation test...
Single picture...
B:/DCIM/100CANON/IMG_2950.CR2 not found.
B:/DCIM/100CANON/IMG_2950.JPG: 1092363
Two burst pictures...
Ideally, the camera should be in some continuous shooting mode (not checked).
B:/DCIM/100CANON/ABC_2951.CR2 not found.
B:/DCIM/100CANON/ABC_2951.JPG: 1157974
B:/DCIM/100CANON/ABC_2952.CR2 not found.
B:/DCIM/100CANON/ABC_2952.JPG: 1163068
Bracketed pictures...
B:/DCIM/100CANON/IMG_2953.CR2 not found.
B:/DCIM/100CANON/IMG_2953.JPG: 3670080
B:/DCIM/100CANON/IMG_2954.CR2 not found.
B:/DCIM/100CANON/IMG_2954.JPG: 1127978
B:/DCIM/100CANON/IMG_2955.CR2 not found.
B:/DCIM/100CANON/IMG_2955.JPG: 365945
Bulb picture...
Elapsed time: 12134
B:/DCIM/100CANON/IMG_2956.CR2 not found.
B:/DCIM/100CANON/IMG_2956.JPG: 365945
Picture taking tests completed.

Testing multitasking...
Only one task allowed to interrupt...
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Main task yielding.
Task C started.
Task C finished.
Main task back.
Multitasking tests completed.

Testing half-shutter...
Half-shutter test OK.

Testing module 'lv'...
LiveView is running; stopping...
Starting LiveView...
Overlays: ML
Overlays: ML
Overlays: disabled
Overlays: disabled
Overlays: ML
Overlays: disabled
Overlays: disabled
Overlays: ML
Overlays: disabled
Overlays: Canon
Overlays: Canon
Overlays: Canon
Overlays: disabled
Overlays: ML
Overlays: disabled
Overlays: Canon
Overlays: Canon
Overlays: Canon
Overlays: Canon
Setting zoom to x1...
Setting zoom to x5...
Setting zoom to x10...
Setting zoom to x5...
Setting zoom to x1...
Setting zoom to x10...
Setting zoom to x1...
Pausing LiveView...
Resuming LiveView...
Stopping LiveView...
LiveView tests completed.


Testing lens focus functionality...
Autofocus outside LiveView...
Focus distance: 655350
Autofocus in LiveView...
Please trigger autofocus (half-shutter / AF-ON / * ).
19...18...Autofocus triggered.
Autofocus completed.
Focus distance: 3900
Focusing backward...
Focus distance: 655350
Focus motor position: 0
Focusing forward with step size 3, wait=true...
....
Focus distance: 470
Focus motor position: 0
Focusing backward with step size 3, wait=true...
..
Focus distance: 655350
Focus motor position: 0
Focus range: 4 steps forward, 2 steps backward.
Motor steps: 0 forward, 0 backward, 0 lost.
Focusing forward with step size 3, wait=false...
..........
Focus distance: 470
Focus motor position: 0
Focusing backward with step size 3, wait=false...
..........
Focus distance: 655350
Focus motor position: 0
Focus range: 10 steps forward, 10 steps backward.
Motor steps: 0 forward, 0 backward, 0 lost.
Focusing forward with step size 2, wait=true...
................
Focus distance: 470
Focus motor position: 0
Focusing backward with step size 2, wait=true...
...............
Focus distance: 655350
Focus motor position: 0
Focus range: 16 steps forward, 15 steps backward.
Motor steps: 0 forward, 0 backward, 0 lost.
Focusing forward with step size 2, wait=false...
................................................
Focus distance: 470
Focus motor position: 0
Focusing backward with step size 2, wait=false...
.........................................
Focus distance: 655350
Focus motor position: 0
Focus range: 48 steps forward, 41 steps backward.
Motor steps: 0 forward, 0 backward, 0 lost.
Focusing forward with step size 1, wait=true...
.............................................................
Focus distance: 470
Focus motor position: 0
Focusing backward with step size 1, wait=true...
...........................................................
Focus distance: 655350
Focus motor position: 0
Focus range: 61 steps forward, 59 steps backward.
Motor steps: 0 forward, 0 backward, 0 lost.
Focusing forward with step size 1, wait=false...
...
Focus distance: 470
Focus motor position: 0
Focusing backward with step size 1, wait=false...
...
Focus distance: 655350
Focus motor position: 0
Focus range: 109 steps forward, 107 steps backward.
Motor steps: 0 forward, 0 backward, 0 lost.

Focus test completed.

Testing exposure settings...
Camera    : Canon EOS REBEL T5i (700D) 1.1.5
Lens      : EF28-105mm f/3.5-4.5 USM
Shoot mode: 3
Shutter   : Ç5 (raw 75, 0.192776s, 193ms, apex 2.375)
Aperture  : Å5.6 (raw 48, f/5.6, apex 5.)
Av range  : Å3.5..Å22 (raw 37..80, f/3.5..f/22.6, apex 3.625..9.)
ISO       : Ä1600 (raw 104, 1600, apex 9.)
EC        : 0.0 (raw 0, 0 EV)
Flash EC  : 0.0 (raw 0, 0 EV)
Setting shutter to random values...
Setting ISO to random values...
Setting aperture to random values...
Please switch to Av mode.
Setting EC to random values...
Setting Flash EC to random values...
Exposure tests completed.


Testing movie recording...
Please switch to Movie mode.
Movie recording tests completed.

Done!
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on May 28, 2018, 10:02:25 PM
Let's try the new resolutions on 700D

1. 2520x1384 16:9 @ 24fps
2. 3K  3072x1304 2.35:1 @ 20fps

https://www.magiclantern.fm/forum/index.php?topic=19300.msg202049#msg202049
Title: Re: Canon 700D / T5i
Post by: hecz0r on June 20, 2018, 05:37:46 PM
Since I had to dig a bit too much for my patience to find an up to date and or exhaustive guide for 700d raw video, this is mine.

Requirements: UHS I or better SD Card. I've a SanDisk Extreme PRO UHS II which is definitely overkill, gets me around 60mb/s.

Ten easy steps:
1. Get latest build from here and install as usual https://bitbucket.org/Dannephoto/magic-lantern/downloads/
2. Enable all modules and reboot.
3. Under Scripts, press Q on "enable SD overclocking" and enable "Autorun". You could do the same for any of the recording modes listed, if you plan to use only one in particular and wanna make sure it's always working properly. Reboot.
4. Set your exposure correctly (make sure ISO as low as possible, over 1000 you start artifacting a bit, shutter speed to 1/48 if shooting in 24 or double of any framerated needed, finetune it to exactly that through Movie - Image Fine-tuning - Shutter fine-tuning)
5. Set up MLVFS on Win/Mac, guide here : https://www.magiclantern.fm/forum/index.php?topic=13152.0
6. If you get any pink dots, chroma smooth with 2x2.
7. Use Adobe Camera RAW to grade the image sequence, by importing it directly from the MLVFS virtual drive. I usually just hit "auto" on exposure and white balance, and select my lens from the profiles to remove any distortion / vignetting.
8. Render uncompressed avis or dnxhd movs in order to edit, directly from SD. It's faster for me this way, than copying files and then exporting, since it happens at the same time. You need to prerender - on a 250gb EVO SSD I can't edit smoothly in Premiere or After Effects without prerendering, maybe Final Cut handles image sequences better?
9. Edit your clip. Add grading. Upscale to 8k when rendering, YouTube allows for higher bitrate and better grain display. I use .mov dnxhr hq 8 bit in After Effects to render 8k. H.265 works fine as well, renders much slower in my experience, and I have a good upload speed so I afford uploading gigabytes.
10. Enjoy near 4k quality from your $500 camera lol.

A couple of examples: https://www.youtube.com/watch?v=-fwEpsWXQ04 - clean footage. https://www.youtube.com/watch?v=fYVwqTO7Blo - heavily edited footage.
Title: Re: Canon 700D / T5i
Post by: Ballinger on June 28, 2018, 08:34:17 PM
Quote from: theBilalFakhouri on May 28, 2018, 10:02:25 PM
Let's try the new resolutions on 700D

1. 2520x1384 16:9 @ 24fps
2. 3K  3072x1304 2.35:1 @ 20fps

https://www.magiclantern.fm/forum/index.php?topic=19300.msg202049#msg202049

I cannot get this to work on the 700D no matter what I try.   :'(  Is your module designed to be used in concert with the SD UHD hack?  Could you please be more specific as to how and when to switch from Liveview to Play mode during the process?  Most of the time I simply experience a lockup when trying your module, but the one time I actually did get it to almost work in 3x crop mode it immediately frame-skipped and stopped recording. 

I'm running the latest Crop 4k branch for the 700D with firmware 1.15.  Thank you so much for your efforts - if you're successful with this module it would be the biggest accomplishment yet with Magic Lantern and the 700D. 
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on June 29, 2018, 04:51:32 PM
@Ballinger

Sorry for late responding --> See this:
https://www.magiclantern.fm/forum/index.php?topic=19300.msg203316#msg203316
Title: Re: Canon 700D / T5i
Post by: Ballinger on July 01, 2018, 07:18:07 AM
Quote from: hecz0r on June 20, 2018, 05:37:46 PM
Since I had to dig a bit too much for my patience to find an up to date and or exhaustive guide for 700d raw video, this is mine.

Requirements: UHS I or better SD Card. I've a SanDisk Extreme PRO UHS II which is definitely overkill, gets me around 60mb/s.

Ten easy steps:
1. Get latest build from here and install as usual https://bitbucket.org/Dannephoto/magic-lantern/downloads/
2. Enable all modules and reboot.
3. Under Scripts, press Q on "enable SD overclocking" and enable "Autorun". You could do the same for any of the recording modes listed, if you plan to use only one in particular and wanna make sure it's always working properly. Reboot.
4. Set your exposure correctly (make sure ISO as low as possible, over 1000 you start artifacting a bit, shutter speed to 1/48 if shooting in 24 or double of any framerated needed, finetune it to exactly that through Movie - Image Fine-tuning - Shutter fine-tuning)
5. Set up MLVFS on Win/Mac, guide here : https://www.magiclantern.fm/forum/index.php?topic=13152.0
6. If you get any pink dots, chroma smooth with 2x2.
7. Use Adobe Camera RAW to grade the image sequence, by importing it directly from the MLVFS virtual drive. I usually just hit "auto" on exposure and white balance, and select my lens from the profiles to remove any distortion / vignetting.
8. Render uncompressed avis or dnxhd movs in order to edit, directly from SD. It's faster for me this way, than copying files and then exporting, since it happens at the same time. You need to prerender - on a 250gb EVO SSD I can't edit smoothly in Premiere or After Effects without prerendering, maybe Final Cut handles image sequences better?
9. Edit your clip. Add grading. Upscale to 8k when rendering, YouTube allows for higher bitrate and better grain display. I use .mov dnxhr hq 8 bit in After Effects to render 8k. H.265 works fine as well, renders much slower in my experience, and I have a good upload speed so I afford uploading gigabytes.
10. Enjoy near 4k quality from your $500 camera lol.

A couple of examples: https://www.youtube.com/watch?v=-fwEpsWXQ04 - clean footage. https://www.youtube.com/watch?v=fYVwqTO7Blo - heavily edited footage.

Thank you for sharing!  IMHO, your method is by far the most practical and useful way to accomplish 4k rendering on the 700D.  SD_UHD overclocking is the only way to achieve useful UHD footage with the 700D at present. 
Title: Re: Canon 700D / T5i
Post by: Levas on July 04, 2018, 09:32:23 AM
@all, dener.3id needs some help getting crop mode working on the t5i.
https://www.magiclantern.fm/forum/index.php?topic=22429.msg203283#msg203283 (https://www.magiclantern.fm/forum/index.php?topic=22429.msg203283#msg203283)

@dener.3id

Almost there, weird live view is perfectly normal in these high resolution crop modes, everybody is hoping on a fix in the future  :P
These crop presets are all made for use in 5x zoom mode, you're still in 1080p mode, not zoomed in.
Try to go into 5x zoom mode with the magnify button.

Once in 5x zoom mode, you can use 'half shutter press' to see a sort of live view made by magic lantern.
Use the half shutter press for framing your shot, once set right, leave half shutter press and press the record button.
Title: Re: Canon 700D / T5i
Post by: dener.3id on July 04, 2018, 11:23:24 AM
Quote from: Levas on July 04, 2018, 09:32:23 AM
@all, dener.3id needs some help getting crop mode working on the t5i.
https://www.magiclantern.fm/forum/index.php?topic=22429.msg203283#msg203283 (https://www.magiclantern.fm/forum/index.php?topic=22429.msg203283#msg203283)

@dener.3id

Almost there, weird live view is perfectly normal in these high resolution crop modes, everybody is hoping on a fix in the future  :P
These crop presets are all made for use in 5x zoom mode, you're still in 1080p mode, not zoomed in.
Try to go into 5x zoom mode with the magnify button.

Once in 5x zoom mode, you can use 'half shutter press' to see a sort of live view made by magic lantern.
Use the half shutter press for framing your shot, once set right, leave half shutter press and press the record button.

Thanks it seems to work now. anyway I change the bit depth, or dualiso? I only get about a second of recording at 2.5 k, how do I enable the sd_uhs hack?
Title: Re: Canon 700D / T5i
Post by: Levas on July 04, 2018, 11:42:34 AM
If you go to 'raw video' menu (enter q button on camera to enter this menu)
You can choose 'data format', set this to 14-bit lossless.

Now for sd_uhs hack, not sure if your version has it, but if it has.
Enable module 'sd_uhs'.
Once it is enabled and camera is restarted, you'll find a new option in the 'Debug' tab, in magic lantern menu.
You'll see the option 'SD overclock'.
Click this option(must be in photo mode, clicking it in video mode doesn't work).
When clicked on this option, you'll see the card reader led blink a few times, when the red light doesn't blink anymore, it's safe to switch to video mode and use it.

You have to click the sd_uhs option everytime you switch on your camera (when camera is turned off, sd_uhs is disabled)
Title: Re: Canon 700D / T5i
Post by: alameen on July 04, 2018, 01:39:17 PM
I just download and install the latest ML on my cannon 700d and seems it's working fine. Does any one know how to record a video in zoom level. It's there any Step by stepb procedure kindly track me please...
Title: Re: Canon 700D / T5i
Post by: dener.3id on July 05, 2018, 01:34:52 AM
Quote from: Levas on July 04, 2018, 11:42:34 AM
If you go to 'raw video' menu (enter q button on camera to enter this menu)
You can choose 'data format', set this to 14-bit lossless.

Now for sd_uhs hack, not sure if your version has it, but if it has.
Enable module 'sd_uhs'.
Once it is enabled and camera is restarted, you'll find a new option in the 'Debug' tab, in magic lantern menu.
You'll see the option 'SD overclock'.
Click this option(must be in photo mode, clicking it in video mode doesn't work).
When clicked on this option, you'll see the card reader led blink a few times, when the red light doesn't blink anymore, it's safe to switch to video mode and use it.

You have to click the sd_uhs option everytime you switch on your camera (when camera is turned off, sd_uhs is disabled)

mine dose not have it. I'm looking for where I can download a copy of the module.
Title: Re: Canon 700D / T5i
Post by: dener.3id on July 06, 2018, 05:00:33 AM
Quote from: dener.3id on July 05, 2018, 01:34:52 AM
mine dose not have it. I'm looking for where I can download a copy of the module.

Any ideas?
Title: Re: Canon 700D / T5i
Post by: dfort on July 06, 2018, 06:32:48 AM
Quote from: dener.3id on July 06, 2018, 05:00:33 AM
Any ideas?

Here's an idea--read the responses to your posts.

Quote from: dfort on June 29, 2018, 07:52:37 AM
If you really want to go cutting edge with the sd-uhs module and a lua script that sets everything on startup look up Danne's builds (https://bitbucket.org/Dannephoto/magic-lantern/downloads/).
Title: Re: Canon 700D / T5i
Post by: dfort on July 06, 2018, 08:12:26 AM
Found some stubs that were off on the EOSM and in the process might have found one on the 700D too. I'm pretty sure this needs to be adjusted but am not sure how to test it.

-NSTUB(0xFFA73C58 - RAM_OFFSET,  TryPostEvent_end)
+NSTUB(0xFFA73C5C - RAM_OFFSET,  TryPostEvent_end)
Title: Re: Canon 700D / T5i
Post by: a1ex on July 06, 2018, 09:36:32 AM
It's no longer used; it was an early experiment to trace the calls to that function.
Title: Re: Canon 700D / T5i
Post by: dfort on July 07, 2018, 06:27:29 PM
Ok--it isn't being used but it is obviously the wrong address so how about we fix it in case we need to get back to it in the future?

Hey, that gives me an idea for a movie  8)

Pull request respectfully submitted:

https://bitbucket.org/hudson/magic-lantern/pull-requests/934/700d-fix-trypostevent_end-stub-address/diff
Title: Re: Canon 700D / T5i
Post by: honeybager on July 09, 2018, 08:59:50 PM
Complete Noob here. We've got a T5i and a Pix E7. We're trying to output video from the T5i to the Pix E7. We've got magic lantern installed on the T5i and have gotten rid of the overlays but the video is still cropped with a black border around it.

How do we get rid of that?
Title: Re: Canon 700D / T5i
Post by: stevedraw on August 31, 2018, 04:31:08 PM
Hi guys,

Was wondering if anyone had any ideas about some assert log errors I got recently. Was on a photoshoot (normally work with video) and was shooting in RAW and jpeg. All of a sudden loads of lines popped up on screen so i just turned on and off camera. It happened a few times but when I rebooted it everything seemed to be fine. That was until I checked the SD card (after the shoot of course) and found out that after the first error the camera didnt capture any RAW images AND the jpeg size was 1920X1280!! Bad buzz to say the least. Anyway here is the log for anyone interested:

ML ASSERT:
lv
at ../../src/raw.c:1878 (raw_lv_request), task livev_hiprio_task
lv:0 mode:3


Magic Lantern version : Nightly.2016Nov10.700D114
Mercurial changeset   : db7ebc66bfe1 (unified) tip
Built on 2016-11-10 01:12:21 UTC by jenkins@nightly.
Free Memory  : 118K + 3113K


Any tips would be much appreciated!
Cheers,
Stephen
Title: Re: Canon 700D / T5i
Post by: a1ex on August 31, 2018, 05:12:37 PM
Likely some race condition, pretty sure unrelated to picture quality settings from Canon menu.

There is a feature that warns you if picture quality is not RAW, but it's not enabled by default. Maybe it should?
Title: Re: Canon 700D / T5i
Post by: stevedraw on August 31, 2018, 05:34:05 PM
Hi Alex,

Thanks for the reply. Yeah I definitely didn't change the picture quality settings during the shoot so now realize that after an assert log it just takes photos from the video picture quality setting, I assume.

I think a default setting to warn users that they are not taking RAW images is a great idea, especially when ML knows that's what they want from settings enabled.

Cheers!
Title: Re: Canon 700D / T5i
Post by: stevedraw on August 31, 2018, 05:36:35 PM
p.s Just do a new install you reckon? Would be a bitch if it happened on another shoot. Or just a format?

Cheers,
Stephen
Title: Re: Canon 700D / T5i
Post by: a1ex on August 31, 2018, 05:42:46 PM
Quote from: stevedraw on August 31, 2018, 05:34:05 PM
Yeah I definitely didn't change the picture quality settings during the shoot

In this case, please try to find a way to reproduce the issue. ML does not attempt to change picture style settings, so... either user error (settings changed by mistake) or some very unusual bug.
Title: Re: Canon 700D / T5i
Post by: stevedraw on August 31, 2018, 06:34:30 PM
Hi Alex,

Thanks for tip. I recreated the error and the assert log reappears but the image quality stayed the same (i.e RAW + jpeg) so must have messed up myself (damnit!). Here is the first assert log I got (see image attached)
(https://thumb.ibb.co/bXWrhz/IMG_4287.jpg) (https://ibb.co/bXWrhz)
 

And here's the second one with extra 404 warnings for some reason
(https://thumb.ibb.co/iwZu2z/IMG_4288.jpg) (https://ibb.co/iwZu2z)


Weird one. Any suggestions? Thanks again for your time.
Title: Re: Canon 700D / T5i
Post by: a1ex on August 31, 2018, 07:33:12 PM
It's probably harmless, though need to double-check to be 100% sure. I've disabled that warning in the experimental crop_rec_4k builds, as I was getting it every now and then; didn't notice anything weird so far.

If you find a way to reproduce the error consistently, that would help.
Title: Re: Canon 700D / T5i
Post by: stevedraw on August 31, 2018, 11:05:06 PM
Cool, cheers.

Been trying to get error and can't get it again, which is a good thing I guess! If I do get it again and can recreate consistently I'll post back. Thanks again for the help. The assert log files won't affect the card will they either? I noticed I can't just delete them off card. Will probably do a format after I copy all the shots onto ex hd.
Title: Re: Canon 700D / T5i
Post by: IBIRRU on September 18, 2018, 05:02:40 PM
Dear all,
again many thanks to all development team, you are great people.

I want to experiment:
1) the new crop_rec module developed by Alex
and
2) also the Danne sd_uhs module at the same time

is it possible?

For point 1 : I need just to substitute the crop_rec module from experimental section (Latest Build (2018-07-22 13:09)) using the one that @theBilalFakhouri linked here  ?https://drive.google.com/open?id=1ZXcqPUu-d6i1vpR8j869e7ghVqovjkg8  (https://drive.google.com/open?id=1ZXcqPUu-d6i1vpR8j869e7ghVqovjkg8)

For point 2 I don't know

anyone could help me?

Thanks

Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on September 18, 2018, 05:31:51 PM
Hello @IBIRRU

Here are the two modules you want:
https://drive.google.com/open?id=1nHCDKJh9Hxq9mM3XMmQAL8MDzc43Cj-x

crop_rec only for 700D for now and sd_uhs for all D5 Cams. Put them under crop_rec_4k build from experimental section (https://builds.magiclantern.fm/experiments.html) and replace old crop_rec with the one in the link in ML/modules folder.
Title: Re: Canon 700D / T5i
Post by: IBIRRU on September 18, 2018, 08:56:55 PM
@TheBilalFakhouri

Thanks a lot, I will post my findings
Cheers
Title: Re: Canon 700D / T5i
Post by: IBIRRU on September 19, 2018, 11:55:11 AM
@theBilalFakhouri  :)

i'm sorry but seem to be  a problem with new crop-rec module
(https://thumb.ibb.co/k0ai6e/IMG_20180918_225136_2.jpg) (https://ibb.co/k0ai6e)
.  :(

The normal crop_rec.mo module from magiclantern-crop_rec_4k.2018Jul22.700D115 experimental, works without problem.
I started with a formatted card.

Could you help me to solve?

Thanks
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on September 19, 2018, 12:35:55 PM
@IBIRRU

Okay my bad. I compiled a build from crop_rec_4k branch and in the experimental page it's from crop_rec_4k_mlv_snd and it has some differences so Try this Build (https://drive.google.com/open?id=1NDq2X9ilSV5WngLHKaApfxig7KCXOn0O) which I use. :D
Title: Re: Canon 700D / T5i
Post by: mvrck on September 19, 2018, 05:45:48 PM
Quote from: theBilalFakhouri on September 19, 2018, 12:35:55 PM
@IBIRRU

Okay my bad. I compiled a build from crop_rec_4k branch and in the experimental page it's from crop_rec_4k_mlv_snd and it has some differences so Try this Build (https://drive.google.com/open?id=1NDq2X9ilSV5WngLHKaApfxig7KCXOn0O) which I use. :D

Hi and congrats on the great advancements. Unfortunately I have exactly the same problem as IBIRRU and the build above produces the same errors as the July 22nd build I previously tried it on. It's probably something very simple we're missing, but I can't figure out what. Any help would be much appreciated.
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on September 19, 2018, 07:11:16 PM
@mvrck

Make clean install using build here (https://drive.google.com/drive/folders/1nHCDKJh9Hxq9mM3XMmQAL8MDzc43Cj-x) then replace mlv_snd and crop_rec and put them (also sd_uhs) in ML/modules folder. Enable crop_rec and mlv_lite only for now in the camera make a restart then try it!

@IBIRRU

Also replace mlv_snd here is all files in Google Drive: Download (https://drive.google.com/drive/folders/1nHCDKJh9Hxq9mM3XMmQAL8MDzc43Cj-x). If you want the automatic script for overclocking SD card download it from same link (SDoverclock.lua) and put it in ML/scripts folder.

Feedback please.

EDIT: Also replace mlv_lite :P same link sorry for this.
Title: Re: Canon 700D / T5i
Post by: mvrck on September 19, 2018, 08:14:22 PM
@ theBilalFakhouri I think it was the mlv_lite module that made the difference. The error disappeared even without this new version of mlv_lite, when only crop_rec and mlv_lite were enabled. Enabling anything else produced the same error. Anyway, I followed your advice, did all the things and now it works. LiveView is pretty much unusable, but it works! I'll be playing with settings, resolutions, etc. When I have something, I post a video. Thanks a lot for the help. Newbies like me really need it. :)
Title: Re: Canon 700D / T5i
Post by: IBIRRU on September 20, 2018, 08:44:10 AM
@ThebilalFakhouri
thanks

I downloaded all file following your instructions.

It runs without error.
Next days I will try to use and play with it  :)
Title: Re: Canon 700D / T5i
Post by: koljanych on September 21, 2018, 03:48:50 PM
Quote from: theBilalFakhouri on September 19, 2018, 07:11:16 PM
Feedback please.

could not use in practice, the resolution are changing chaotically. most often the recording is done with the settings from the mlv_lite module


(https://thumb.ibb.co/fzZicK/01.jpg) (https://ibb.co/fzZicK)
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on September 22, 2018, 02:20:00 PM
@koljanych

You don't have to enter x5 mode or using FPS override. You can select a preset from Canon menu 1080p24, 1080p25 or 1080p30 If you want lower than that FPS you can select in crop_rec submenu Half or Quarter FPS in the current mode.

Just select 1x3 in Pixel binning and change Y resolution to 2214 then and very important press MENU button in the camera then get back to LiveView. You should press MENU button after making a change in crop_rec to refresh LiveView with new settings.
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on September 22, 2018, 09:25:52 PM
Here is all registers have been changed between mv1080 and mv720 in 700D I can see half of them in adtg_gui using "modified from now on" I couldn't use them as preset in old crop_rec method is there something to do ? I got the registers using io_trace_full branch. I am guessing the missing registers is here to get correct LiveView in mv1080 in EOS M or using 3x3 in mv720 in other cameras or even also getting normal LiveView in 1x3 mode.

mv720
c0f0200c:        2
c0f02014:  2ba01b5
c0f0204c:  2ba01b5
c0f04008:  1fa36ac
c0f04010:    100f8
c0f04108:  4000080
c0f04208:  c1f7800
c0f04508:  d9c0000
c0f04510:   e00020
c0f04808:  20ffe34
c0f04910:  2d60008
c0f06008:  20f020f
c0f0600c:  20f020f
c0f06010:      20f
c0f06014:      3f2
c0f06804:  2d701d4
c0f0713c:      2d8
c0f07150:      29b
c0f08184:      2d6
c0f08548: 1022152d
c0f0854c:  7580b04
c0f08554: 1023152e
c0f08558:  5050303
c0f0855c:        c
c0f08d20:      100
c0f09008:  2d6070f
c0f09030:   280064
c0f09034:  2c406f4
c0f0903c:   280064
c0f09040:  2c806f4
c0f09050:   300064
c0f09054:  2c406f4
c0f0905c:   280064
c0f09060:  2c806f4
c0f0b020:    a0027
c0f0b0ac:      7ff
c0f0b0b4:  3ff0000
c0f0b0c8:   3f0000
c0f11340:        1
c0f11388:     6073
c0f11394:  2b106bf
c0f113bc:        1
c0f11870:        1
c0f1197c:  2b106bf
c0f11984:  2b106bf
c0f119f0:        1
c0f11a50:        1
c0f11a58:        1
c0f11b9c:  2b106bf
c0f11bcc:   400045
c0f11bd0:    50200
c0f11bdc:  2b103bf
c0f16008:        Miis
c0f1600c:        Miss
c0f1a00c:  2b106bf
c0f1b350:        miss
c0f26100:        4
c0f26108:   7543d4
c0f26808:  1600eb0
c0f26810:    f3132
c0f30108:  dd3c000
c0f30a08:  dbacf5c
c0f30b08:  dc85984
c0f35088:      2d7
c0f35144:       4c
c0f37014:       22
c0f37a70:  2d6070f
c0f37ad0:  2d6070f
c0f37b8c:  2d6070f
c0f38024:  2d601c3
c0f38070:  2ba01b5
c0f38080:  2b80002
c0f38094:  2bb0000
c0f383d4:   1c000e
c0f383dc:  2d701c4
c0f38934:  2b701b5
c0f38960:  2b70000
c0f38998: e4e4e4e4
c0f3899c:   100000
c0f389a4:  2b701b5
c0f389b4:  2b801b6
c0f389bc: 10101221
c0f389c0:   96004c
c0f389c4:   11001e
c0f389c8: 20002000
c0f389d4:  2b701b5
c0f389e4:  2b801b7
c0f3a044:      22c
c0f3a04c:  2b701b5
c0f3a0a0:  2bb06cb
c0f3a0b0:  2bb06c8
c0f3b054:  2b706c7
c0f3b070:  2b70717
c0f3b074:  2b10717
c0f3b0dc:  2b1070f


mv1080
c0f0200c:       12
c0f02014:  48801b5
c0f0204c:  48801b5
c0f04008:  1fa72b0
c0f04010:    4175c
c0f04108:  43cc080
c0f04208:  b9d7800
c0f04508:  d9c1e00
c0f04510:   ef0020
c0f04808:  20f61ec
c0f04910:  4a50008
c0f06008:  20f020f
c0f0600c:  20f020f
c0f06010:      20f
c0f06014:      9df
c0f06804:  4a601d4
c0f0713c:      4a7
c0f07150:      46a
c0f08184:      4a5
c0f08548:  def152d
c0f0854c:  7200b04
c0f08554:  df0152e
c0f08558:  3030303
c0f0855c:      10b
c0f08d20:      missing
c0f09008:  4a5070f
c0f09030:   200064
c0f09034:  4a006f4
c0f0903c:   200064
c0f09040:  4a006f4
c0f09050:   280064
c0f09054:  49c06f4
c0f0905c:   200064
c0f09060:  4a006f4
c0f0b020:   230027
c0f0b0ac:      320
c0f0b0b4:  1da000f
c0f0b0c8:  3ff0000
c0f11340:        miss
c0f11388:     miss
c0f11394:  miss
c0f113bc:        3
c0f11870:        miss
c0f1197c:  47f06bf
c0f11984:  47f06bf
c0f119f0:        miss
c0f11a50:        miss
c0f11a58:        3
c0f11b9c:  47f06bf
c0f11bcc:    50009
c0f11bd0:    20333
c0f11bdc:  47f03bf
c0f16008:        4
c0f1600c:        4
c0f1a00c:  47f06bf
c0f1b350:        4
c0f26100:        1
c0f26108:   753ba0
c0f26808:  159e930
c0f26810:    f6256
c0f30108:  dd3cd80
c0f30a08:  dcf7e7c
c0f30b08:  dbad984
c0f35088:      4a6
c0f35144:       80
c0f37014:        e
c0f37a70:  4a5070f
c0f37ad0:  4a5070f
c0f37b8c:  4a5070f
c0f38024:  4a501c3
c0f38070:  48801b5
c0f38080:  4860002
c0f38094:  4890000
c0f383d4:   1d000e
c0f383dc:  4a601c4
c0f38934:  48501b5
c0f38960:  4850000
c0f38998: 6c6c6c6c
c0f3899c:   120001
c0f389a4:  48501b5
c0f389b4:  48601b6
c0f389bc: 10101221
c0f389c0:   96004c
c0f389c4:   11001e
c0f389c8: 20002000
c0f389d4:  48501b5
c0f389e4:  48601b7
c0f3a044:      2ac
c0f3a04c:  48501b5
c0f3a0a0:  48906cb
c0f3a0b0:  48906c8
c0f3b054:  48506c7
c0f3b070:  4850717
c0f3b074:  47f0717
c0f3b0dc:  47f070f


Some of the registers was missing in mv1080 and also in mv720 showing only in mv720 or mv1080.

Why adtg_gui doesn't catch them ?
Title: Re: Canon 700D / T5i
Post by: a1ex on September 23, 2018, 08:54:53 AM
Quote from: theBilalFakhouri on September 22, 2018, 09:25:52 PM
I can see half of them in adtg_gui using "modified from now on"
[...]
Why adtg_gui doesn't catch them ?

Which ones are not displayed in adtg_gui?

They may be hidden by various filters, for example EDMAC registers and those changing "too often" are not displayed.

Quoteis there something to do?

Yes, no easy answer. I'm thinking to show the entire sequence for one LiveView frame (maybe also with some debug messages, so you know where the registers come from), but syncing is hard, given that some registers are set in one mode and not in another, they may be set in possibly different order, some registers may be set every few frames, some are set in response to external events (and timing may not be always the same for every frame) and so on.

Parsing these huge logs to display them in a nicer way may be an easier task, as all the info is there.
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on September 23, 2018, 10:11:55 AM
In adtg_gui I can see the following: mv1080 to mv720

Canon EOS 700D 1.1.5
c0f06014:     3f2 (was 9df)      ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff38109c addr=428a0 FPS register B
c0f35088:     2d7 (was 4a6)      ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff280434 addr=28ea8
c0f09008: 2d6070f (was 4a5070f)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=AeWb pc=ff4fe97c addr=189dc8
c0f0903c:  280064 (was 200064)   ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=AeWb pc=ff4fea28 addr=189dc8
c0f09040: 2c806f4 (was 4a006f4)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=AeWb pc=ff4fea44 addr=189dc8
c0f09054: 2c806f4 (was 49c06f4)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=AeWb pc=ff4fea98 addr=189dc8 Aewb metering area (y2|x2)
c0f0905c:  280064 (was 200064)   ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=AeWb pc=ff4feac4 addr=189dc8
c0f09060: 2c806f4 (was 4a006f4)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=AeWb pc=ff4feae0 addr=189dc8
c0f08548:1022152d (was def152d)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=AeWb pc=ff382ab4 addr=4075e5b0 LV resolution * downsize factor? (RAW.height * D | RAW.width * D)
c0f0854c: 7580b04 (was 7200b04)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=AeWb pc=ff382ab4 addr=4075e5b8
c0f08554:1023152e (was df0152e)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=AeWb pc=ff382ab4 addr=4075e5c8
c0f08558: 5050303 (was 3030303)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=AeWb pc=ff382ab4 addr=4075e5d0
c0f0855c:       c (was 10b)      ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=AeWb pc=ff382ab4 addr=4075e5d8
c0f08578:       0 (was 100)      ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=AeWb pc=ff382b30 addr=189da0 Vignetting correction data (DIGIC IV)
c0f06804: 2d701d4 (was 4a601d4)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff570228 addr=42ab0 RAW last line|column. 5D3: f6e|2fe, first 1|18 => 5936x3950
c0f0713c:     2d8 (was 4a7)      ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff380858 addr=42810 HEAD3 timer (ticks?)
c0f37a70: 2d6070f (was 4a5070f)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fc80c addr=ff9781b8
c0f37b8c: 2d6070f (was 4a5070f)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fc80c addr=ff9781f8
c0f08184:     2d6 (was 4a5)      ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fc80c addr=ff978298 LV resolution (RAW.height) aka HIV_V_SIZE
c0f37ad0: 2d6070f (was 4a5070f)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fc80c addr=ff9783d0
c0f37014:      22 (was e)        ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fc80c addr=ff978520 LV raw type (see lv_af_raw, lv_set_raw) - DIGIC V
c0f4200c:       2 (was 12)       ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=AeWb pc=ff384460 addr=765084
c0f38070: 2ba01b5 (was 48801b5)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70c5bc addr=17dfd8
c0f38080: 2b80002 (was 4860002)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70c60c addr=17dfd8
c0f38094: 2bb0000 (was 4890000)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70c684 addr=17dfd8
c0f38024: 2d601c3 (was 4a501c3)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70c4dc addr=17dfc8
c0f383d4:  1c000e (was 1d000e)   ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70c524 addr=17dfc8 Preview area (y1 | x1/4)
c0f383dc: 2d701c4 (was 4a601c4)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70c6b8 addr=17dfd8 Preview area (y2 | x2/4)
c0f38934: 2b701b5 (was 48501b5)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70e02c addr=17dc18
c0f38960: 2b70000 (was 4850000)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70e0d4 addr=17dc18
c0f38998:e4e4e4e4 (was 6c6c6c6c) ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70e1dc addr=17dc18
c0f3899c:  100000 (was 120001)   ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70e1fc addr=17dc18
c0f389a4: 2b701b5 (was 48501b5)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70e224 addr=17dc18
c0f389b4: 2b801b6 (was 48601b6)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70e274 addr=17dc18
c0f389d4: 2b701b5 (was 48501b5)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70e2c8 addr=17dc18
c0f389e4: 2b801b7 (was 48601b7)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff70e318 addr=17dc18
c0f42014: 2ba01b5 (was 48801b5)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff57ce24 addr=17e1d8
c0f4204c: 2ba01b5 (was 48801b5)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff57ce88 addr=17e1d8
c0f3a044:     22c (was 2ac)      ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff713754 addr=17e1d0
c0f3b054: 2b706c7 (was 48506c7)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff7069dc addr=17e198
c0f3b070: 2b70717 (was 4850717)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff706a04 addr=17e198
c0f3b074: 2b10717 (was 47f0717)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff706a18 addr=17e198
c0f3b0dc: 2b1070f (was 47f070f)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff58363c addr=17e1d0
c0f1a00c: 2b106bf (was 47f06bf)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fd4f8 addr=ff979c48 LV resolution (raw.j.width | raw.j.height)
c0f11b9c: 2b106bf (was 47f06bf)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fd4f8 addr=ff979ca8
c0f11bcc:  400045 (was 50009)    ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fd4f8 addr=ff979cd0
c0f11bd0:   50200 (was 20333)    ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fd4f8 addr=ff979cd8
c0f11bdc: 2b103bf (was 47f03bf)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fd4f8 addr=ff979cf0
c0f1197c: 2b106bf (was 47f06bf)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fdcf0 addr=ff97ca84
c0f11984: 2b106bf (was 47f06bf)  ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fdcf0 addr=ff97ca94
c0f11388:    6073 (was 0)        ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fdcf0 addr=ff97cb0c
c0f11394: 2b106bf (was 0)        ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fdcf0 addr=ff97cb1c LV resolution (raw.j.height | raw.j.width)
c0f113bc:       1 (was 3)        ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fdcf0 addr=ff97cb2c
c0f11a58:       1 (was 3)        ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff4fdcf0 addr=ff97cb54
c0f07150:     29b (was 46a)      ISO=100 Tv=160 Av=56 lv=1 zoom=1 mv=1 res=1 crop=0 task=Evf pc=ff38086c addr=42858 HEAD4 timer (ticks?)
==================================================================


I deleted ADTG ones.

These are the missing ones in adtg_gui: (after comparing the two logs)
c0f0200c
c0f0204c
c0f04008
c0f04010
c0f04108
c0f04208
c0f04508
c0f04510
c0f04808
c0f04910
c0f08d20 this was missing in mv1080 but in mv720 is showing (io_trace_full)
c0f09030
c0f09034
c0f09050
c0f0b020
c0f0b0ac
c0f0b0b4
c0f0b0c8
c0f11340 this was missing in mv1080 but in mv720 is showing (io_trace_full)
c0f11388 this was missing in mv1080 but in mv720 is showing (io_trace_full). I can see it in adtg_gui in mv1080 the value was 0x0
c0f11394 this was missing in mv1080 but in mv720 is showing (io_trace_full). I can see it in adtg_gui in mv1080 the value was 0x0
c0f11870
c0f119f0 this was missing in mv1080 but in mv720 is showing (io_trace_full)
c0f11a50 this was missing in mv1080 but in mv720 is showing (io_trace_full)
c0f16008
c0f1600c
c0f1b350
c0f26100
c0f26108
c0f26808
c0f26810
c0f30108
c0f30a08
c0f30b08
c0f35144
c0f389bc
c0f389c0
c0f389c4
c0f3a04c
c0f3a0a0
c0f3a0b0


In io_trace_full branch the registers was about 1800 registers but I deleted the unchanged ones between mv1080 and mv720 and kept the changed registers (about 96 registers). Now I knew the missing registers between mv1080 and mv720 in io_trace_full the value was 0x0 in mv1080 (as you can see in adtg_gui using crop_rec_4k build) so it wasn't showed in mv1080 and it was missing.
Title: Re: Canon 700D / T5i
Post by: a1ex on September 23, 2018, 10:54:22 AM
c0f0200c, c0f0204c: not present in my logs (?!)
c0f04xnn: EDMAC channel "x", filtered out
c0f08d20: set to either 0 or 0x100, updated many times; adtg_gui considers it "noise"
c0f09030: flips between 0x00280064 and 0x00200064; same as above
c0f09034: 0x049C06F4 / 0x04A006F4
...
c0f11388: appears to be set only on video mode change (LVx1_SetYuvPath[8], RecStandby_x1_SetYuvPath[8])
c0f11394: same as above
...
c0f26xnn: EDMAC channel "x" + 16, filtered out
c0f30xnn: EDMAC channel "x" + 32, filtered out

C0F389BC: set from EngDrvBits; not logged; io_trace backend should catch it
c0f389c0: video mode change only? (LVDEV_DRV_ReadyCommon)
c0f389c4: same
c0f3a04c: same, resolution related
c0f3a0a0: same, resolution related
c0f3a0b0: same, resolution related

unlisted: same as c0f08d20 & co.

P.S. mind uploading your logs? Mine are a bit incomplete. I'm looking for io_trace_full logs showing every single video mode, including initialization (such as entering from photo mode).
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on September 23, 2018, 11:52:17 AM
With io_trace backend I can see 10 more registers:
c0f3a100
c0f3a2e0
c0f3a460
c0f3a464
c0f3a468
c0f140d0
c0f140d4
c0f3a04c
c0f3a0a0
c0f3a0b0

I have tested it before the LiveView still stuck.

I did a mistake the following registers stayed the same values in both mv720 and mv1080: (I forgot to delete them in logs)
c0f389bc: 10101221
c0f389c0:   96004c
c0f389c4:   11001e
c0f389c8: 20002000


Quote from: a1ex on September 23, 2018, 10:54:22 AM
c0f0200c, c0f0204c: not present in my logs (?!)
c0f04xnn: EDMAC channel "x", filtered out
c0f08d20: set to either 0 or 0x100, updated many times; adtg_gui considers it "noise"
c0f09030: flips between 0x00280064 and 0x00200064; same as above
c0f09034: 0x049C06F4 / 0x04A006F4
...
c0f11388: appears to be set only on video mode change (LVx1_SetYuvPath[8], RecStandby_x1_SetYuvPath[8])
c0f11394: same as above
...
c0f26xnn: EDMAC channel "x" + 16, filtered out
c0f30xnn: EDMAC channel "x" + 32, filtered out

C0F389BC: set from EngDrvBits; not logged; io_trace backend should catch it     (Same in mv1080 and mv720)
c0f389c0: video mode change only? (LVDEV_DRV_ReadyCommon)                     (Same in mv1080 and mv720)
c0f389c4: same                                                                                              (Same in mv1080 and mv720)
c0f3a04c: same, resolution related   .......................................................      (Showed using io_trace backend)
c0f3a0a0: same, resolution related   .......................................................      (Showed using io_trace backend)
c0f3a0b0: same, resolution related   .......................................................      (Showed using io_trace backend)

unlisted: same as c0f08d20 & co.

Still not showing: (And maybe the important we needs)
c0f0200c
c0f0204c
c0f11388
c0f11394


And the rest you have mentioned if it were not necessary.
Title: Re: Canon 700D / T5i
Post by: squig on September 23, 2018, 01:17:37 PM
I get that the 700D is skipping, not binning; but I've noticed there's less aliasing on the 5D Mk3 in 1x1 with dual ISO than with 3x3. The problem with 1x1 (besides the rolling shutter) is more visible noise. I'm wondering how 1x3 has reduced the noise so much, and would it apply to the 5D Mk3 too? I'm up for testing a test build.
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on September 23, 2018, 01:48:16 PM
Quote from: squig on September 23, 2018, 01:17:37 PM
I get that the 700D is skipping, not binning; but I've noticed there's less aliasing on the 5D Mk3 in 1x1 with dual ISO than with 3x3. The problem with 1x1 (besides the rolling shutter) is more visible noise. I'm wondering how 1x3 has reduced the noise so much, and would it apply to the 5D Mk3 too? I'm up for testing a test build.

Some clarifying things:
https://www.magiclantern.fm/forum/index.php?topic=22818.msg206400#msg206400
https://www.magiclantern.fm/forum/index.php?topic=19300.msg206133#msg206133

In the above info it's look like now when using Dual ISO 100/800 in 1x3 then stretched down to the correct aspect it's like using Dual ISO 50/400 so I guess here the noise has been killed.
In 1x1 there is no sampling for the noise it's more visible naturally.

Of course it can be applied in any DIGIC 5 cameras like 5D3 maybe in D4 also but it will take some time to be finished (the new crop_rec (https://www.magiclantern.fm/forum/index.php?topic=19300.msg205546#msg205546)).
Title: Re: Canon 700D / T5i
Post by: Drknoche on October 23, 2018, 05:39:32 AM
Hi, to all here on the forums :)  Just installed ML in the the 700D and everything seems fine except one thing. There is a lot of artifacts on the raw video. And I mean a lot... Noise and black and green dots ramndomize on all the frames, Is that normal? Any advice on improving the video on RAW?
Title: Re: Canon 700D / T5i
Post by: IDA_ML on October 23, 2018, 09:03:02 AM
Just expose to the right (ETTR) to get maximum signal to noise ratio!  Then everything will be fine. 
Title: Re: Canon 700D / T5i
Post by: theBilalFakhouri on October 23, 2018, 09:53:52 AM
Quote from: Drknoche on October 23, 2018, 05:39:32 AM
Hi, to all here on the forums :)  Just installed ML in the the 700D and everything seems fine except one thing. There is a lot of artifacts on the raw video. And I mean a lot... Noise and black and green dots ramndomize on all the frames, Is that normal? Any advice on improving the video on RAW?

Hello
These called Focus pixels (https://www.magiclantern.fm/forum/index.php?topic=16054.0). Try MLVApp (https://www.magiclantern.fm/forum/index.php?topic=20025.0) it will fix these dots automatically. What software you are using for converting MLV ?
Title: Re: Canon 700D / T5i
Post by: Mdubin on December 20, 2018, 11:03:44 PM
Hi.I need help. Where did the setting disappear focus confirm in magic zoom????
(https://i.ibb.co/GR13KjT/P81221-000051.jpg) (https://ibb.co/GR13KjT)
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on December 21, 2018, 02:07:02 PM
Not available on 700D (and other cams). Feature is linked to CONFIG_LV_FOCUS_INFO. See https://builds.magiclantern.fm/features.html -> Internals -> CONFIG_LV_FOCUS_INFO listing supported cams.
Title: Re: Canon 700D / T5i
Post by: Mdubin on December 23, 2018, 09:24:07 PM
Very sorry. Very useful feature. This is a big drawback.
Title: Re: Canon 700D / T5i
Post by: dfort on December 23, 2018, 10:16:26 PM
Wait -- really?

/** This camera doesn't report focus info in LiveView **/
//~ #define CONFIG_LV_FOCUS_INFO


That's strange, the 700D seems to report focus information just fine in LiveView. However, I tried activating this feature and the green bars aren't showing up.

Magic Zoom is flickering over here (tested unified branch), are you seeing this? Maybe this issue (https://bitbucket.org/hudson/magic-lantern/issues/844/severe-flicker-of-magic-zoom) wasn't resolved?
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on December 23, 2018, 11:15:08 PM
https://www.magiclantern.fm/forum/index.php?topic=15280.msg148694#msg148694
https://bitbucket.org/hudson/magic-lantern/issues/2657/missing-type-of-magic-zoom-box-green-bars
Title: Re: Canon 700D / T5i
Post by: dfort on December 24, 2018, 03:52:25 PM
Thanks Walter. Just wondering, is Magic Zoom working on the 650D?

It works fine on the EOSM but shows severe flicker on the 700D. I'm testing on the unified branch. Tried going back in time to find something that works. Went all the way to firmware 1.1.3 builds from 2014 and it was still flickering. I also searched the pull requests and commits and found this merged fix (https://bitbucket.org/hudson/magic-lantern/pull-requests/666/650d_700d_magic_zoom_flicker_fix/diff) but it it still flickers. There's also this fix for the EOSM (https://bitbucket.org/hudson/magic-lantern/pull-requests/650/dpjpandone-fixes-magic-zoom-flicker-on/diff) but it has since been updated to include all CONFIG_DIGIC_V cameras.

Since the problem seems to be in state object, maybe there's something wrong here?

platform/700D.115/include/platform/state-object.h
#ifndef __platform_state_object_h
#define __platform_state_object_h

#define DISPLAY_STATE DISPLAY_STATEOBJ
#define INPUT_SET_IMAGE_VRAM_PARAMETER_MUTE_FLIP_CBR 23
#define INPUT_ENABLE_IMAGE_PHYSICAL_SCREEN_PARAMETER 24
#define EVF_STATE (*(struct state_object **)0x25B0C)
#define MOVREC_STATE (*(struct state_object **)0x277C4)
#define SSS_STATE (*(struct state_object **)0x257C4)

#endif // __platform_state_object_h


Am I getting warm? Should I keep looking or is this something that can't or won't be fixed on the 700D?
Title: Re: Canon 700D / T5i
Post by: dziki76 on March 08, 2019, 03:14:05 PM
Hi,

I have kind question ("serach" did not help me :() - is there "HDR photo" available in ML for Canon 700D? I have installed latest version of ML, my 700D have latest FW, but I cannot see "HDR bracketing" or any other "HDR" stuff in "shoot" menu.

Thank you in advance!
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on March 08, 2019, 06:22:47 PM
Top of page -> Downloads -> Download Nightly Builds -> Feature matrix. There you will find all features for all cams supported by nightly build scheme and - for most functions - a link to a short help text or a forum discussion covering the feature. You won't find HDR Photo or HDR Bracketing because the feature you are looking for was renamed "Advanced Bracket" and found in Shoot tab. Another feature you might want to look into is module "adv_int".

Short help for Advanced Bracket: https://wiki.magiclantern.fm/camera_help#advanced_bracket
Title: Re: Canon 700D / T5i
Post by: dziki76 on March 11, 2019, 09:40:38 PM
Thank you very much!
Title: Re: Canon 700D / T5i
Post by: scrax on March 13, 2019, 02:25:53 PM
I'm tring to add support to my module for other cameras than 600D, can somebody help in finding missing GUIMODE for 700D?
more info and discussion here (https://www.magiclantern.fm/forum/index.php?topic=23650.0)
Title: Re: Canon 700D / T5i
Post by: kitor on February 12, 2021, 10:14:25 PM
For those wondering why thread suddenly ends in '19, you can find some development on another subforum.

https://www.magiclantern.fm/forum/index.php?topic=25784.0
Title: Disable Powersave 30minutes on Canon 700D / T5i
Post by: atpt on October 30, 2023, 12:08:25 PM
Firmware 1.1.5
How can I disable the 30 minutes powersave?
Thanks
Title: Re: Canon 700D / T5i
Post by: Walter Schulz on October 30, 2023, 12:16:47 PM
https://wiki.magiclantern.fm/faq#how_do_i_record_stream_for_more_than_30_minutes